Used Waterjet Sweden for sale (462)

Condition: excellent (used), Professional industrial screwdriver by Atlas Copco, designed for continuous operation in assembly lines and production applications. True industrial-grade equipment – not a consumer retail product. Specifications and info: • Model: ETP STB34-06-106 • Power supply: 18V DC • Country of manufacture: Sweden • Year of manufacture: 2021 • Ergonomic, well-balanced design • Suitable for precision assembly and serial production Set includes: Ffsdpfoyc Rvajx Adpsw • Atlas Copco cordless screwdriver • 2x 18V Atlas Copco batteries • Atlas Copco charger • Everything visible in the photos is included Condition: Used, fully functional, with typical signs of use. No cracks, no play in the mechanism. The tool comes from industrial disassembly. Applications: • Manufacturing • Industrial assembly • Production lines • Professional workshops An ideal alternative to buying new equipment – significantly lower cost while maintaining Atlas Copco quality.

Condition: used, Year of construction: 2009, Overview  This complete compressed air installation was manufactured between 2009 and 2013 by Atlas Copco (Sweden) and Donaldson Filtration GmbH (Germany). The setup includes two Atlas Copco GA132 VSD low-pressure compressors, one Atlas Copco FD160 VSD air dryer, and one Donaldson UFA-AC0016 oil separator. Designed to deliver reliable and energy-efficient air supply at up to 8.5 bar, this system is ideal for continuous production environments. The installation has been regularly maintained, with full maintenance completed in August 2025, and is in good working condition. The entire system is still installed and connected, and immediately available for inspection and sale. Technical data  Years of Manufacture: 2009 – 2013 Application: Industrial compressed air system Total Capacity: 2 × 24.1 m³/min Maximum Pressure: 8.5 bar Power Supply: 274.8 kW Scope of Delivery  Compressor | Atlas Copco | GA132 VSD | 2013 Compressor | Atlas Copco | GA132 VSD | 2012 Air dryer | Atlas Copco | FD160 VSD | 2012 Oil separator | Donaldson Filtration GmbH | UFA-AC0016 | 2009 Ffsdpfx Adsxrc Acjpew

Year of construction: 2002, condition: excellent (used), ABB IRB 140 Country of manufacture: Sweden Year of production: 2002 Reach: 800 mm Control: M2000 Ffsdepuz Dyjpfx Adpjw Load capacity: 6 kg

Condition: excellent (used), Year of construction: 2008, load capacity: 1 kg, Cell ABB IRB 340 M2004 Type B Robot - 34-51225 Country of production: Sweden Production date: 2008 Control system: ABB M2004 Number of axes: 4 Load capacity: 1 kg Robot weight: 140 kg Range: Diameter - 1130 mm Height - 250 mm Rotation - no limit Cell dimensions: Length - 150 cm Ffedpfxoqffhhe Adpew width - 145 cm Height - 240 cm The cell has two belt conveyors with a length of 65 cm and a width of 100 cm.

Condition: used, For sale: Salmatec Maxima 700 pellet press in full working condition, installed in a Rematec container with electrical cabinet and a tent shelter. Capacity – up to 3 t/h. Ffjdpfx Ajit I Rtjdpow The line includes: - Press and hammer mill: Salmatec – reliable German quality with high efficiency and durability. - Conveying and dosing equipment: Rematec – robust and precise material handling at every stage. - Additional equipment: cyclones, sieves, cooler, control cabinet, etc. - Tent shelter. Key advantages: - High production capacity – up to 3 t/h. - High-quality European manufacturer components. - Suitable for professional pellet production from wood biomass, agro-biomass or other raw materials. - Fully operational line – demonstration possible. - Available immediately. Dismantling and transport are to be arranged by the buyer. We can recommend a company to assist with this process. The equipment can be inspected in full working order in Sweden. All foundation drawings and DWG files are available. Price: EUR 650,000

Condition: like new (used), Year of construction: 2023, x-travel 4216,0 mm y-travel 2007,0 mm z-travel 305,0 mm control CNC table-size 4902,0 x 2134,0 mm max. workpiece weight 1465 kg / m² machine weight ab. 2500 kg total power requirement 30 kW Ffedpfx Asyclvnsdpew dimensions of the machine ca. 5486,0 x 3708,0 mm The compact waterjet cutting system in bridge design consists of a torsion-resistant torsion-resistant steel construction, which is coated with a special durable anti-corrosion coating. coating. Both the two X-axes and the particularly high Y-axis are based on the Y-axis are based on the maintenance-free design specially developed by OMAX for the special requirements of a waterjet cutting system. specially developed by OMAX for the special requirements of a waterjet cutting system. Equipment: - Motorized Z-axis - Water level control - Abrasive system with AFS 1000 abrasive conveyor system - High-pressure system with special stainless steel high-pressure pipes - MAXIEM direct pump M4050 - OMAX Intelli-MAX PC control software for MAXIEM - OMAX PC control software Intelli-MAX Premium - Cutting head technology based on the A-Jet 5-axis angular cutting head - Height sensor for the A-Jet 5-axis angle cutting head - Laser pointer as a positioning aid - Automatic desludging system MBM ASAS-ME - Compressed air injection for the MBM ASAS-ME automatic desludging system - Clamping and fastening set for sheet material and material holders - Collecting grid in the cutting basin - Sensors for automatic monitoring of the cutting process - Water treatment through water conditioning incl. water analysis - Omni-Start drilling aid (Vacuum Assist) for brittle and laminated materials

Condition: good (used), Year of construction: 2018, operating hours: 40,350 h, functionality: fully functional, Baling Press Presona LP 85 VH2 with Cross Tying, Year of Manufacture 2018 Technical Specifications: Manufacturer: Presona Sweden Model: LP 85 VH2 Year: 2018 Drive Power: 2 x 45 kW Ffjdpjybanijfx Adpjw Operating Hours: 40,350 Effective Operating Hours: Approx. 22,000 Pre-press Force: 28 t Main Press Force: 85 t Feed Opening: 1500 x 1100 mm Bale Dimensions: 750 x 1100 mm Bale Weight: 450–650 kg Theoretical Throughput Volume: 1,200 m³/h Throughput Capacity at 30–100 kg/m³: 13–30 t/h Tying: 5-fold vertical, 3-fold horizontal Oil Tank Capacity: 2,000 L Press Transport Dimensions: 10,400 x 2,400 x 2,800 mm (LxWxH) Weight: Approx. 27,000 kg The press was removed from ongoing operation. A spare parts package is included in the scope of delivery. Technical documentation is available. Please note: All technical data refer to the manufacturer’s information. We do not assume liability for the specifications provided or for any errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Viewings are possible by appointment. Sale only by advance payment, ex works, without warranty or guarantee.

Year of construction: 2010, operating hours: 1,480 h, condition: excellent (used), functionality: limited functionality, machine/vehicle number: 1873076, We are offering this very well-maintained Uhde high-pressure pump for waterjet, HPS 4022, year of manufacture 2010. Manufacturer: Uhde High-Pressure Pump for Waterjet Model: HPS 4022 Year of Manufacture: 2010 Condition: Very good Category ID: 34 Machine Type: Uhde HPS Waterjet High-Pressure Pump If you have any questions or require further information, please feel free to send us a message or give us a call. Ffsdpfoygmhtox Adpew

Condition: good (used), Year of construction: 2010, functionality: fully functional, X 3,200mm, Y 2,100mm, Z 920mm, ATC 40 pos, BT50 10,000Rpm. weight ca 35.000kg, delivery April 2026 Fsdpfx Adoyglbxepsfw

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: 17004A, bar diameter (max.): 20 mm, For sale: two fully operational Tsugami HS20M 5-axis machines. Everything is in working order, recently serviced and technically inspected. Included: various tool holders, full technical documentation. These machines were primarily used for manufacturing dental implants and were purchased from Sweden. If interested, please contact me for more details, photos, price, or to arrange an inspection. Fodpfxjyghcre Adpjfw Price per unit: €40,000.

Condition: used, Motor 90 Kwt Ffedpfxoygcy Ss Adpow

Condition: used, Year of construction: 2015, 2015 Watercut 172LX Waterjet Cutting Machine – Excellent Condition We are offering a well-maintained 2015 Watercut 172LX waterjet cutting machine, ideal for high-precision cutting tasks in food production and industrial applications. This reliable machine has been used carefully and remains in very good working condition. Key Features & Specifications: • Model: Watercut 172LX – high-pressure waterjet cutting system • Year: 2015 • Cutting Area: Approximately 600 × 400 mm (60 × 40 cm) – perfect for a wide range of cutting projects • Cutting Pressure: 3000 bar high-pressure waterjet for consistent, precise cuts • Power Supply: 380 V, 50 Hz three-phase power • Motor Power: Approximately 10 kW • Dimensions (L×W×H): ~1800 × 1200 × 1150 mm • Weight: ~750 kg • Designed for high-quality, versatile cutting, suitable for frozen products, cakes, chocolate decorations and other materials requiring clean edges and consistency • Control panel with operator interface for precise program setting and repeatable cutting operations Fjdpfoyf U I Eex Adpjfw • Built for medium-to-high production environments, with robust high-pressure technology and efficient workflow Condition: • In very good condition — well cared for and fully functional. • Clean and consistent cutting performance — ready to integrate into your production line. • Year: 2015 • Motor Power: Approximately 10 kW • Weight: ~750 kg

Condition: ready for operation (used), Year of construction: 2013, operating hours: 26,646 h, functionality: fully functional, machine/vehicle number: 20360, Available for inspection in operation at our production facility. Waterjet cutting machine 6x3m, 1x2.5D cutting head, incl. HD pump 4000 bar, stainless steel cutting tank, abrasive remover. Purchase date 03-12-2013 Serial number 20360 Model Resato ACM 3060 Operating hours 26,646 hours (as of 24 October 2025) XY working range machine 3020 x 6020 mm Precision in X or Y axis +/-50 µm Maximum gap between bridge 210 mm +/- 10 mm Z-axis range -220 – 0 mm Maximum working pressure 4000 bar Minimum speed 1 mm/min Speed range 1 – 30,000 mm/min Maximum acceleration 500 mm/s2 (acceleration depends on cutting process) Ambient temperature 12 – 32°C Relative humidity 30 – 80% General protection class IP54 Specific protection class IP65 Voltage-frequency 1x 230 ± 5% VAC, 50-60Hz Electrical connections 1 x 16A + N + PE Operator panel 17’’ touchscreen, color Network/internet connection RJ45 socket Communication 100BaseT CAT5e Slat load capacity 1000 kg/m2 Floor load 5 N/mm2 Air connection Quick coupling, type Orion Air quality Dry and filtered air Dew point at 3°C at 7 bar Min 7 bar, max 12 bar 30 Nl/min Required floor flatness Max 15 mm deviation over 6 meters Typical sound pressure level 87 – 92 dB Special details The tank was originally plastic but has been modified to stainless steel Pump specifications (optional extra pump available as spare) PJ4-4000 – Resato Waterjet Centix ID: 601194 Model: Resato Powerjet 4000 Serial number: 18996 Purchase date: 26-11-2012 Max. capacity: 3.8 L/min Ffsdpfxoxu U Nms Adpsw Max. pressure: 4000 bar Max. power: 30 kW Number of intensifiers: 1 Low noise level:

Condition: refurbished (used), Year of construction: 2019, operating hours: 5,900 h, functionality: fully functional, Waterjet Cutting System 2010 Premium TAC From previous ownership, serviced thoroughly after complete service in 02/2026, inspected and ready for operation. Maximator JET certificate available. Availability: in 4 weeks Year of manufacture cutting table: 2019 Operating hours cutting table: 5,900 hrs • Effective cutting area: 2,000 mm (gantry) x 1,000 mm • Z-axis CNC vertical clearance 200 mm with Quick UP • Cutting head TAC12, A/B +/- 12° • Automatic height sensing and collision protection • CNC control NUM • Rittal electrical cabinet on wheels • Operator PC with LED monitor, splash-proof keyboard and mouse • Waterjet software SmartCut powered by IGEMS; subscription-based • Handheld operator device • Laser for position detection • Cutting valve MJ 100 • Abrasive head aJET 3D • CNC abrasive dosing unit with intermediate hopper • Abrasive storage container 1,200 kg with automatic pressure feed system • High-pressure piping on the axes up to the cutting head • Safety system with light barriers • Water tank with heavy-duty support slats • Reference edge on X and Y • Machine feet with precision wedge shoes Fjdpfx Asxvqvfsdpofw • 1-year or 1,200 operating hours warranty • High-pressure pump HYTRON 40.30, 30 kW, YOM 2006, 28,852 hrs, retrofit in 10/2025 with warranty, new pulsation damper with TÜV certification Technical data and prices subject to change and errors excepted. Sale subject to prior sale.

Condition: excellent (used), Year of construction: 2017, ABB IRB 4600 industrial robot in excellent condition, perfect for various industrial and automation tasks. Below are the details: Robot Specifications: Manufacturer: ABB (Made in Sweden) Type: IRB 4600 Robot Variant: IRB 4600-40/2.55 Ffedpfx Asu Sz Iisdpsw Protection: Foundry Plus Payload Capacity: 40 kg Net Weight: 435 kg Serial Number: 4600-104724 Date of Manufacture: 2017-02-08 Important Notes: This listing is for the robot only. Control panel and additional devices are NOT included. Please include your price offers directly when reaching out to us

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 21220, type of input current: AC, total height: 3,100 mm, total width: 4,000 mm, total length: 9,400 mm, overall weight: 8,600 kg, input voltage: 400 V, type of cooling: water, Resistance spot welding system LASO Tech Systems "WP Welding System" Year of manufacture: 2023 Serial number: 21220 Order number: 11B01 265845 Manufacturer: LASO Tech Systems GmbH, 98527 Suhl Type: WP welding system Total weight: approx. 8,600 kg Dimensions (L x W x H): approx. 9.4 x 4.0 x 3.1 m Rated voltage: 400 V / 3 Ph / 50 Hz Rated power: 138 kVA at 100% duty cycle Main Components: YASKAWA Positioner V2-500D3 L = 1650 Serial number: 466843-1-1 | Year of manufacture: 2022 | Weight: 1,409 kg | Item number: 411503 | Part No.: 148548-100 (Yaskawa Nordic AB, Sweden) Equipment: Servo rotary axis, swivel unit, Penlink rotary union (P/N 365003 – S/N 3197). Total unit weight: approx. 1,500 kg. Project assignment: LASO Tech, Project No. 30101293. Welding cell LASO WP-SLK Steel frame construction with safety enclosure, electrically interlocked access points. Integrated positioning systems (S1 / S2). Controller: LASO industrial PC / Siemens S7 / Robot controller compatible with YASKAWA Motoman. Power supply 400 V / 50 Hz / 138 kVA. Process control for resistance spot welding with cooling water, compressed air, and network interfaces. Full I/O wiring provided. YASKAWA Industrial Robot GP180 with Controller YRC1000 Ffsdpfxsxlixws Adpow Type: YR-1-06VX180-A00 | Year of manufacture: 11/2022 | Payload: 180 kg | Own weight: 1,020 kg Serial number: 6V22Y2842450001 | Manufacturer: YASKAWA Europe Robotics d.o.o., Kocevje (Slovenia) Controller: YRC1000, type ERAS-1000-06VX280-E10, SN 6V22X2807840001, year: 10/2022 Power: 6.5 kVA, supply: AC 380–440 V, 50/60 Hz | Teach Pendant +RM1 | Integrated safety shutdown. Control Cabinet NIMAK multiCONTROL with Bosch Rexroth PRC7300 Type: PRC7300-L1-01VRS-0105-01-00002-EC-01 | Serial number: 7261404217680 Supply: 3~ 400–480 V / 110 A | Manufacturer: Bosch Rexroth AG, Lohr am Main Year: 2023 | Fully wired with safety modules and EMZ interface. RSP Tool Changer System Manufacturer: Robot System Products (RSP), Sweden | Type: P8366-150 with tool changer P7501-036 (Sn 0001 / 0002) and docking units P8303A. Pneumatic, coolant, and signal transfer integrated. Connection via RobiFix. Welding Guns Gun 1 – NIMAK LRN 300-650-R54-175-150-P2U-WR Project: 95.011.360 | Machine No.: 2212–2129 N | Weight: 120.5 kg | Year: 2023 Transformer: Expert MF100-530 V-A.01 (SN: T-297432). Coupling: RSP P7501-036 + P8303A. Gun 2 – NIMAK CRN 300-650-R54-200-P2U-WL Project: 95.029.224 | Machine No.: 2212–2128 N | Weight: 109.5 kg | Year: 2023 Transformer: Expert MF100-530 V-A.01 (SN: T-297431). Coupling: RSP P7501-036 + P8303A. Welding Gun Cleaning Station (LASO Special Construction) Free-standing unit on steel base with SEW geared motor (400 V). Two round brushes Ø 180 mm x 150 mm. Condition and Scope of Delivery Entire system built 2022/2023, as new condition. All components including cabling, control cabinets, safety enclosure, and documentation are supplied. Dismantled and transport-secured as agreed.

Year of construction: 2018, condition: used, x-travel 4000 mm y-travel 2000 mm z-travel mm 4000 bar total power requirement 35 kW weight of the machine ca. t dimensions of the machine ca. m MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 "touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC® module / machine info iMSNC® module / user management "AsperWin Basic" programming system for programming directly on the Machine control "AsperWin Select" macro library module Mod ul NC simulator "AsperWin NC-Sim" 2. USB 3.0 connection option for storage medium 3. Remote maintenance module MicroStep RemoteDiagnostics® Remote maintenance access through TeamViewer 4. Water jet cutting table with grate support / 4,000 x 2,000 mm Ffodpfx Adjg N Nlvjpow Working area 5. Automatic height control for the water jet cutting head 6. BFT high pressure pump ECOTRON ® 40.37 7. Automatic pump control 8. Allfi® cutting head type IV (1 piece) 9. Allfi® abrasive head CENTERLINE type II "Long Life" (1 piece) 10. Allfi® abrasive dosing system 11. Allfi® abrasive conveyor system type II 12. Automatic abrasive dosing via the CNC control 13. High pressure installation material for connecting the high pressure pump to the existing water network 14. Error messages via SMS via the iMSNC control 15. GSM modem for the iMSNC control 16. Double-sided rope protection (collision protection) over the portal bridge Emergency stop switch 17. Desludging plant (scraper conveyor) for a length of 4,000 mm 18. Water stabilization by means of a metering device and addition of Water chemistry 19. Water chemistry WI N2054Si 20. CAM software "AsperWin Basic" for programming

Condition: used, mileage: 186,000 km, power: 265 kW (360.30 HP), first registration: 11/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, loading space length: 6,310 mm, loading space width: 2,480 mm, loading space height: 2,380 mm, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, We are very pleased that our offer has attracted your interest and can already assure you that you will be able to purchase a well-maintained and affordably priced vehicle with fully documented service history from us! Electric-hydraulic Wingliner body Special equipment: - Axle load measuring system - Front axle load: 8.0 t - Two-line trailer brake system - Connectors on the left - Trailer hitch: Ringfeder towing hitch - Audio system: CD radio (Bluetooth) - Exhaust outlet right underside - Compressed air connection in driver’s cab - Air horn - Driver assistance system: Attention-Assist (drowsiness detection sensor) - Cab: steel-sprung, comfort - Cab floor with 170 mm engine tunnel - 3-piece fenders - Cool box / refrigerator - Air intake behind cab - Enhanced engine brake - Lateral spare wheel hoist - Rotating beacons left/right - Acoustic reverse warning (external alarm signal) - Tail lift control switch - Fleet management system interface - Driver’s seat: comfort suspension seat - External sun visor Ffjdsxmp Saopfx Adpew - Side window sunblind on driver’s door - Additional 24V socket in passenger footwell - Cab door extension Additional specifications: - Emission standard EURO 6 - Axle configuration: 4x2 - 24V / 15-pin trailer socket - Antos - Exterior mirrors electrically adjustable and heated - 170 Ah battery - Rear axle differential lock - Steel air tank - Medium air unit - Driver assistance: Active Brake Assist - Driver assistance: Lane Keeping Assist - Cab width: 2.30 m - Cab: hydraulic tilt mechanism - Cab: M ClassicSpace - Cab: reinforced (Sweden package) - Suspension: leaf/air - Front springs: 7.5 t, 2-leaf - Electric window lifters - Tinted windscreen - 100 A alternator - 12-speed gearbox - Type: G 211-12 - Urea (AdBlue) tank: 60 liters - Manual lifting roof (steel) - Rear axle crown wheel 440 - 10.4 cm info display - Body/construction: chassis - Central locking system - Fuel tank: 290 l aluminum - Unregulated steering pump - Engine: 10.7 l – 265 kW R6 diesel (OM 470) - Engine compartment encapsulation - Wheelbase: 4,900 mm - Ramp mirror - Spare wheel - Residual heat utilization - Disc brakes, front and rear axles - Seat upholstery: fabric - Passenger functional seat in cab - Front splash guards - Front axle stabilizer - 24V socket in driver’s cab - Tachograph / EU control unit - Aerodynamically shaped underbody panel - Front underrun protection - Toll pre-installation - Dropped front axle - Regulated water pump - Permissible GVW: 18.00 t GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We organize your registration and export documents / EUR 1 and manufacturer’s declaration for export. FINANCING On request, we are happy to offer you a LEASE-PURCHASE or FINANCING PACKAGE. SERVICE TÜV (MOT) / UVV LBW / LGS inspection / tachograph calibration / OBU device installation and service carried out by our AUTHORIZED SERVICE CENTER on site. TOLL / ROAD CHARGES Toll registration can be arranged on site. ARRIVAL / DISTANCES Wittlich train station 500 m away Frankfurt Airport 150 km away Frankfurt-Hahn Airport 40 km away Luxembourg Airport 75 km away Sale according to our terms and conditions. Information provided online is non-binding and does not constitute guaranteed specifications. The seller is not liable for typographical or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: good (used), Year of construction: 2017, operating hours: 12,900 h, functionality: fully functional, machine/vehicle number: 20170777, repeat accuracy: 0.03 mm, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, positioning accuracy: 0.06 mm, type of input current: three-phase, input voltage: 400 V, operating pressure: 4,000 bar, power of the servo motor: 37,000 W, feed length X-axis: 4,000 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 200 mm, total height: 3,500 mm, total length: 6,200 mm, total width: 3,200 mm, water pressure: 4,000 bar, control cabinet height: 1,950 mm, compressed air connection: 7 bar, pump pressure: 4,000 bar, control cabinet width: 800 mm, overall weight: 7,500 kg, product height (max.): 200 mm, input frequency: 50 Hz, power: 37 kW (50.31 HP), Equipment: safety light barrier, Waterjet cutting machine Perndorfer type WSS4020, table size 4000/2000 mm, BFT high-pressure pump with 37 kW and 4000 bar cutting pressure, 3-D cutting head for contour cutting. The machine is used and in good condition; an overhaul by the manufacturer was carried out recently. The machine can be inspected and tested at any time. Ffjdpfxjx H Ny Ts Adpjw

Condition: excellent (used), Disc chipper with horizontal feed work type Bruks 1502M with chip screen type Bruks BS3. Electrical motor 55 kW. Electrical control cabin with starter included. The chipper is suitable for sawmill waste and small diameter logs. Fedpsyaqbqefx Adpofw Capacity up to 50 m3 ready made chips per hour. Infeed opening , width 440 mm, height 275 mm

Condition: excellent (used), Year of construction: 2023, Roof Truss Pressing System for Sale – Complete Set with Tables and Crane For sale: a roof truss pressing system with full equipment – hydraulic press, assembly tables, and overhead crane. The machine is in excellent technical and visual condition, fully operational and ready for immediate use. Included in the set: - Hydraulic roof truss press (maximum pressure up to 242 bar) - Assembly and pressing tables for roof truss production - Overhead crane system with controls - Electrical control cabinet and safety components - CE marked Manufacturer: RANDEK (Sweden) – high-quality professional equipment for timber structure manufacturing Ffsdpfx Asx U Sncedpjw Additional information: - Equipment has been regularly maintained - No additional investment required - Suitable for small and medium-scale production - On-site inspection available For further information, please contact me.

Condition: used, mileage: 186,000 km, power: 265 kW (360.30 HP), first registration: 11/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: blue, gearing type: automatic, emission class: euro6, loading space length: 6,310 mm, loading space width: 2,480 mm, loading space height: 2,380 mm, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, We are very pleased that our offer has attracted your interest and can already assure you that you will be able to purchase a well-maintained and affordably priced vehicle with fully documented service history from us! Electric-hydraulic Wingliner body Special equipment: - Axle load measuring system - Front axle load: 8.0 t - Two-line trailer brake system - Connectors on the left - Trailer hitch: Ringfeder towing hitch - Audio system: CD radio (Bluetooth) - Exhaust outlet right underside - Compressed air connection in driver’s cab - Air horn - Driver assistance system: Attention-Assist (drowsiness detection sensor) - Cab: steel-sprung, comfort - Cab floor with 170 mm engine tunnel - 3-piece fenders - Cool box / refrigerator - Air intake behind cab - Enhanced engine brake - Lateral spare wheel hoist - Rotating beacons left/right - Acoustic reverse warning (external alarm signal) - Tail lift control switch - Fleet management system interface - Driver’s seat: comfort suspension seat - External sun visor - Side window sunblind on driver’s door - Additional 24V socket in passenger footwell - Cab door extension Additional specifications: - Emission standard EURO 6 - Axle configuration: 4x2 - 24V / 15-pin trailer socket - Antos - Exterior mirrors electrically adjustable and heated - 170 Ah battery - Rear axle differential lock - Steel air tank - Medium air unit - Driver assistance: Active Brake Assist - Driver assistance: Lane Keeping Assist - Cab width: 2.30 m - Cab: hydraulic tilt mechanism - Cab: M ClassicSpace - Cab: reinforced (Sweden package) - Suspension: leaf/air - Front springs: 7.5 t, 2-leaf - Electric window lifters - Tinted windscreen - 100 A alternator - 12-speed gearbox - Type: G 211-12 - Urea (AdBlue) tank: 60 liters - Manual lifting roof (steel) - Rear axle crown wheel 440 - 10.4 cm info display Fsdpfx Aex U Nv Dodpjfw - Body/construction: chassis - Central locking system - Fuel tank: 290 l aluminum - Unregulated steering pump - Engine: 10.7 l – 265 kW R6 diesel (OM 470) - Engine compartment encapsulation - Wheelbase: 4,900 mm - Ramp mirror - Spare wheel - Residual heat utilization - Disc brakes, front and rear axles - Seat upholstery: fabric - Passenger functional seat in cab - Front splash guards - Front axle stabilizer - 24V socket in driver’s cab - Tachograph / EU control unit - Aerodynamically shaped underbody panel - Front underrun protection - Toll pre-installation - Dropped front axle - Regulated water pump - Permissible GVW: 18.00 t GERMAN VEHICLE REGISTRATION / CUSTOMS SERVICE We organize your registration and export documents / EUR 1 and manufacturer’s declaration for export. FINANCING On request, we are happy to offer you a LEASE-PURCHASE or FINANCING PACKAGE. SERVICE TÜV (MOT) / UVV LBW / LGS inspection / tachograph calibration / OBU device installation and service carried out by our AUTHORIZED SERVICE CENTER on site. TOLL / ROAD CHARGES Toll registration can be arranged on site. ARRIVAL / DISTANCES Wittlich train station 500 m away Frankfurt Airport 150 km away Frankfurt-Hahn Airport 40 km away Luxembourg Airport 75 km away Sale according to our terms and conditions. Information provided online is non-binding and does not constitute guaranteed specifications. The seller is not liable for typographical or data transmission errors. VEHICLE LOCATION: Dr. Oetker Str. 22 / 54516 WITTLICH-Wengerohr.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 32 h, functionality: fully functional, controller model: RC10A POS, We offer this ex-display machine FANUC CRX-10iA/L industrial robot, year of construction 2024. The robot has been used only during a 4 day exhibition, so in reality it is factory new. Serial number: YS76252-003 Controller type: RC10A POS Supply voltage range: 100-120 / 200-240 V Fjdpsx Upikjfx Adpofw If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 4a99688d-3381-4979-8e5b-43, Year of construction: 2022, operating hours: 164 h, empty load weight: 530 kg, construction height: 525 mm, construction width: 400 mm, Equipment: CE marking, Submitting a bid obligates you to collect the item by the deadline of 28/02/2026! Hardly used demonstration machine! TECHNICAL DETAILS Build volume (single nozzle): 525 × 400 × 400 mm Build volume (multi-nozzle): 500 × 400 × 400 mm Build chamber volume: 84 l Layer height: min. 50 µm, max. 250 µm Accuracy: ±125 µm or ±0.0015 mm per mm Fsdpfxex Ttifj Adpjfw Process: Fused Filament Fabrication, Continuous Fiber Reinforcement MACHINE DETAILS Temperature control: up to 200 °C Extrusion system: Direct-drive print head with two nozzles Materials Thermoplastics: Vega™, ULTEM™ 9085 filament, Onyx®, Onyx FR Continuous fibers: Carbon Fiber, Fiberglass, Aramid Fiber (Kevlar®), High Temperature Carbon Fiber, Carbon Fiber FR Dimensions & Weight Machine dimensions: 1,325 × 900 × 1,925 mm Weight: 530 kg Print head weight: 3 kg Operating hours: 164 h EQUIPMENT Eiger software Direct-drive print head with three nozzles Compatible with various thermoplastic and fiber materials Ethernet port IEC/UL/CSA 62368-1 certification CE mark EU Machinery Directive compliance

Condition: new, functionality: fully functional, Randek Truss System NT produces roof trusses using Fjdpfjxwkuqox Adpofw C-press heads, movable magnetic fixtures on a steel floor and one of our many crane systems. Crane systems: Wall mounted crane Column crane Motorized overhead crane Counter balanced crane Press head: 23T, 27T, 35T, 50T Laser system as an option.