Used Water Softening Plant for sale (10,373)

Condition: ready for operation (used), Year of construction: 2017, operating hours: 45,699 h, functionality: fully functional, machine/vehicle number: 81248168054807, power: 530 kW (720.60 HP), type of cooling: water, nominal power (apparent): 660 kVA, Equipment: documentation/manual, We are offering a used MAN E3262 LE202 combined heat and power (CHP) plant, manufactured in 2017. For sale is a standard-production CHP plant with an electrical output of 530 kW, designed for operation as a biogas plant or with natural gas. The plant is based on a MAN gas engine and a Leroy Somer synchronous generator. The corresponding manufacturer's data sheet is available. The unit is ready for operation and has been functioning perfectly up to the present. The entire plant is for sale, including the CHP unit, container with antechamber and switchgear cabinet, fresh and used oil tanks, plate heat exchanger, exhaust stack, exhaust gas heat exchanger, and some consumables. History & Maintenance: • Commissioning: 17.10.2017 • Major overhaul: carried out on 11.12.2025 - Replaced: cylinder heads with the latest version (M18), piston assembly including pistons, liners, connecting rods and all bearings, main cooling circuit pumps new • Last maintenance: turbocharger replacement in April 2026 - Technical data: Codpfs Agu Tiex Aiijri • Plant type: CHP biogas plant 530 kW • Drive engine: MAN gas engine (internal combustion engine) • Engine number: E 3262 LE 202 • Electrical output: 530 kW • Thermal output: 559 kW • Firing heat output: 1358 kW • Power factor: 0.95 • Efficiencies: Electrical efficiency 39 % | Thermal efficiency 41 % • Heat extraction: Cooling water heat 264 kW + mixed heat HT 75 kW + exhaust gas heat up to 250°C / 220 kW Generator specifications (synchronous generator): • Manufacturer: Leroy Somer • Type: LSA 49.1 S4 C6S/4 • Rated apparent power: 660 kVA / I = 630A • Rated voltages: 400/230V • Grid connection / rated current: Star / 795 A • Protection functions (grid protection relay): AMG 2 (Leonhard/Woodward Stuttgart), including overvoltage/undervoltage protection, overfrequency/underfrequency protection, phase jump and vector jump. Complies with the BDEW guideline Chapter 2.5.3.

Condition: good (used), Water softener, water softener tank -Bank: approx. 200 liters Crodpfx Aiectla Deiei -Incl. Regeneration salt for water softeners -Dimensions: 640/640/H880 mm -Weight: 172 kg

Condition: new, Year of construction: 2025, LG WATER SOLUTIONS LG SW 400 GR REVERSE OSMOSIS MEMBRANES – 36 UNITS Lot of 36 new and unused LG Water Solutions reverse osmosis membrane elements. All units remain sealed and originate from the surplus spare-parts stock of a PET manufacturing plant. TECHNICAL DATA Manufacturer: LG Water Solutions Model: LG SW 400 GR Crsdpfx Aiszvlrzeioi Equipment type: Reverse osmosis membrane elements Application: Seawater reverse osmosis (SWRO) Dimensions: 8 × 40 inches Certification: NSF certified Quantity available: 36 units Condition: New, unused and sealed Origin: Surplus spare-parts stock from a PET manufacturing plant

Condition: new, Year of construction: 2025, COMPACT CONCRETE BATCHING PLANT C60-SNG L GENERAL Plant Type : Compact Concrete Plant with Single Shaft Mixer Plant Capacity : 60m³/hour freshly compressed concrete Mixer Capacity : 1500/1000 lt (1m³ Compressed Concrete) Total Motor Power : 110kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. Credpfx Aisflz Hfjioi Transport : TWO containers. The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries all over the world. * LOW SHIPMENT COST(TWO 40F-OT containers or TWO standart trailers) * QUICK INSTALLATION * EASY AND SIMPLE USE DETAILS: Compacted concrete capacity: 60 m³/h Air Compressor Capacity : 950 lt/min Aggregate Hopper : 60 m³ / 80 m³ Mixer Type : SINGLE Shaft (1 m³). 1500/1000 lt capacity Aggregate Transfer Belt : 800x14.500 mm Weighbridges: Aggregate/ Cement /Water/ Additives OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Condition: new, Year of construction: 2025, COMPACT CONCRETE BATCHING PLANT C60 SNG PLUS Credpfx Aoflz Hdsiiei GENERAL Plant Type : Compact Concrete Plant with Single Shaft Mixer Plant Capacity : 60m³/hour freshly compressed concrete Mixer Capacity : 1500/1000 lt (1m³ Compressed Concrete) Total Motor Power : 85kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. A very low transport cost : ONLY ONE CONTAINER/TRUCK The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 700 Concrete Batching Plants to more than 60 Countries all over the world. * LOW SHIPMENT COST(just ONE 40F-OT container or ONE standart trailer) * QUICK INSTALLATION * EASY AND SIMPLE USE DETAILS: Compacted concrete capacity: 60 m³/h Air Compressor Capacity : 650 lt/min Aggregate Hopper : 4X10 (40 m³ ) Mixer Type : SINGLE Shaft (1 m³). 1500/1000 lt capacity Aggregate Transfer Belt : 800x12.000 mm. Weighbridges: Aggregate/ Cement /Water/ Additives OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 400 kW (543.85 HP), Ore Beneficiation Plant for Nickel, Copper, Zinc, Graphite, Gold, Silver, Chrome, Quartz/Silica In today’s competitive mining and metallurgical industry, maximizing ore value is critical. Our state-of-the-art Ore Beneficiation Plant offers a complete solution designed to increase the content and quality of raw ore, transforming it into a marketable product ready for further processing or direct sale. Engineered for a wide range of minerals—including nickel, copper, zinc, graphite, gold, silver, chrome, and quartz/silica—our ore beneficiation plant delivers exceptional performance, efficiency, and reliability. Introduction Mining operations around the world face the challenge of processing ores that are often low in grade and require extensive refinement to be economically viable. Beneficiation—the process of increasing the concentration of valuable minerals—plays a vital role in reducing operational costs, enhancing recovery, and ultimately, ensuring profitability. Our ore beneficiation plant, also known as an ore processing plant or mine dressing plant, integrates advanced technology and robust engineering to deliver an efficient crushing, grinding, classifying, and separation process. Cjdpfx Aieq Nw Uqjijri Designed to handle a wide variety of ores, our plant is the ideal solution for mining companies looking to optimize their extraction and processing operations. Whether you’re processing nickel, copper, zinc, graphite, gold, silver, chrome, or quartz/silica, our plant provides the versatility and performance needed to meet today’s rigorous industrial standards. ## What Is an Ore Beneficiation Plant? An ore beneficiation plant is a facility where raw ore is processed to improve its quality and increase the concentration of valuable minerals. The plant typically includes several stages of processing: 1. Crushing: The raw ore is reduced in size to allow for more efficient downstream processing. 2. Grinding: Further size reduction to liberate the valuable minerals from the waste material. 3. Classifying: Separation of the ore into different size fractions using screening and hydrocyclones. 4. Separation: Employing various physical processes such as magnetic separation, flotation, or gravity separation to concentrate the valuable minerals. 5. Dewatering: Removal of excess water to prepare the concentrate for further processing or shipping. This integrated process not only boosts the metal content but also minimizes waste, thereby improving overall cost efficiency and environmental sustainability.

Condition: new, STATIONARY CONCRETE BATCHING PLANT S160-TWN GENERAL Plant Type : Stationary Concrete Plant with TWIN Shaft Mixer Plant Capacity : 160m³/hour freshly compressed concrete Mixer Capacity : 6000/4000 lt (4m³ Compressed Concrete) Total Motor Power : 245kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries all over the world. * HIGHLY EFFICIENT AND DUPLICATE PRODUCTION * EASY MAINTENANCE * SUITABLE TO WORK UNDER HARD CONDITIONS * ABLE TO PRODUCE RCC CONCRETE DETAILS: Compacted concrete capacity : 160 m³/h Air Compressor Capacity : 1400 lt/min Aggregate Hopper : 4×40 = 160m³ or 6×30 = 180m³ Mixer Type : TWIN Shaft (4m³). 6000/4000 lt capacity Aggregate Conveyor Band : 1200 mm * 35000 mm Weighbridges: Aggregate/ Cement /Water/ Additives OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Crjdpoflz Injfx Aiisi Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Condition: new, Year of construction: 2025, STATIONARY CONCRETE BATCHING PLANT S130-TWN GENERAL Plant Type : Stationary Concrete Plant with TWIN Shaft Mixer Plant Capacity : 130m³/hour freshly compressed concrete Mixer Capacity : 4500/3000 lt (3m³ Compressed Concrete) Total Motor Power : 168kw Standard Value can be changed depending on Equipment.. Voltage/Frequency : 380V/50Hz Standard Value. The installation and startup of the plant is under our responsibility. We provide excellent after-sales service. 24/7 SERVICES. REMOTE CONTROL SERVICE. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries all over the world. * HIGHLY EFFICIENT AND DUPLICATE PRODUCTION * EASY MAINTENANCE * SUITABLE TO WORK UNDER HARD CONDITIONS * ABLE TO PRODUCE RCC CONCRETE DETAILS: Compacted concrete capacity : 130 m³/h Air Compressor Capacity : 1300 lt/min Aggregate Hopper : 4 Bins:4×30 = 120m³ Mixer Type : TWIN Shaft (3m³). 4500/3000 lt capacity Crsdpfjflz Idox Aiisi Aggregate Conveyor Band : 1000 mm * 32000 mm Weighbridges: Aggregate/ Cement /Water/ Additives OPTIONS: *Cement Silo: 75-100-150-200-500 tons *Cement Silo Equipment and Screw Conveyor. Central Lubrication System Brand : ILC (made in italy) Mixer body Plates : Manganese (it can manufacture 50.000m3-450.000m3) Mixer Internal Linings (Wear Plates) : Ni- hard special hard cast material Discharging in Emergency Situations : manual Emergency Situation hand pump Emergency Stop Button available. Digital Mixer Control System (alarm) Automatic lubrication system monitor feature on pc Control System: Full automatic pc - plc – printer. Unlimited users Remote access Unlimited prescriptions and customer registration Retrospective reporting English- Russian- French- Arabic-German-Spanish languages are available. Switching materials used in the MCC dashboard are SIEMENS Back off available.

Condition: used, SINGLE Industrial Temperature Controller / Water Temperature Controller / Temperature Control System SINGLE STW 150/1-6-B25T/40-K7/KS7 Water/Glycol Temperature Controller Year of manufacture 2016 – mobile industrial version For sale is a used industrial temperature controller from the manufacturer SINGLE Temperiertechnik GmbH, model STW 150/1-6-B25T/40-K7/KS7. The temperature controller is suitable for temperature control of tools, machines, and industrial process circuits. According to the nameplate, the heat transfer medium is water/glycol. Technical data: Manufacturer: SINGLE Temperiertechnik GmbH Model: STW 150/1-6-B25T/40-K7/KS7 Device type: Industrial temperature controller Year of manufacture: 2016 Country of manufacture: Germany Heat transfer medium: Water / Glycol Electrical data: Operating voltage: 400 V Current type: 3~ / PE Frequency: 50 Hz Rated current: 14.8 A Apparent power: 10.2 kVA Temperature control system: STW 150 series for industrial temperature control applications Water/glycol circuit Hydraulic connections for heat transfer medium Pressure gauge Piping and connection fittings Rear connection assembly Equipment: Industrial temperature controller Water/glycol temperature control Electrical main switch Pressure gauge Shut-off valve Hydraulic connections Connecting lines Ventilation openings in the housing Closed industrial housing Transport handle Castors Equipment as shown in the pictures Application areas: Crsdpfo Aa Ngzox Aiiji Tool temperature control Injection molding machines Plastics processing Mechanical engineering Production plants Process and circuit temperature control Industrial temperature control applications Mold and tool making Dimensions / Transport: Dimensions (L x W x H): not yet determined Unladen weight according to the nameplate: 131 kg Condition: Used Year of manufacture 2016 Optical condition as shown in the pictures Signs of wear and tear due to use are present. Some deposits and signs of wear are visible on the rear connections and fittings. Scope of delivery: 1 × SINGLE STW 150/1-6-B25T/40-K7/KS7 temperature controller Connection assembly and fittings as shown in the pictures Otherwise, the scope of delivery is as shown in the pictures. Shipping or freight shipping possible by arrangement. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, SINGLE Industrial Temperature Controller / Water Temperature Controller / Temperature Control System SINGLE STW 150/1-6-B25T/40-K7/KS7 Water/Glycol Temperature Controller Year of manufacture 2016 – mobile industrial version For sale is a used industrial temperature controller from the manufacturer SINGLE Temperiertechnik GmbH, model STW 150/1-6-B25T/40-K7/KS7. The temperature controller is suitable for temperature control of tools, machines, and industrial process circuits. According to the nameplate, the heat transfer medium is water/glycol. Technical data: Manufacturer: SINGLE Temperiertechnik GmbH Model: STW 150/1-6-B25T/40-K7/KS7 Device type: Industrial temperature controller Year of manufacture: 2016 Country of manufacture: Germany Heat transfer medium: Water / Glycol Electrical data: Operating voltage: 400 V Current type: 3~ / PE Frequency: 50 Hz Rated current: 14.8 A Apparent power: 10.2 kVA Temperature control system: STW 150 series for industrial temperature control applications Water/glycol circuit Hydraulic connections for heat transfer medium Pressure gauge Piping and connection fittings Rear connection assembly Equipment: Industrial temperature controller Water/glycol temperature control Electrical main switch Pressure gauge Shut-off valve Hydraulic connections Connecting lines Ventilation openings in the housing Closed industrial housing Transport handle Castors Equipment as shown in the pictures Application areas: Tool temperature control Injection molding machines Plastics processing Mechanical engineering Production plants Process and circuit temperature control Industrial temperature control applications Mold and tool making Dimensions / Transport: Dimensions (L x W x H): not yet determined Unladen weight according to the nameplate: 131 kg Condition: Used Year of manufacture 2016 Optical condition as shown in the pictures Signs of wear and tear due to use are present. Some deposits and signs of wear are visible on the rear connections and fittings. Scope of delivery: 1 × SINGLE STW 150/1-6-B25T/40-K7/KS7 temperature controller Connection assembly and fittings as shown in the pictures Otherwise, the scope of delivery is as shown in the pictures. Shipping or freight shipping possible by arrangement. Subject to changes, errors and prior sale. Crjdpfx Aie Aa Nf Reioi We would be happy to answer any further questions by telephone.

Condition: used, SINGLE Industrial Temperature Controller / Water Temperature Controller / Temperature Control System SINGLE STW 150/1-6-B25T/40-K7/KS7 Water/Glycol Temperature Controller Year of manufacture 2016 – mobile industrial version For sale is a used industrial temperature controller from the manufacturer SINGLE Temperiertechnik GmbH, model STW 150/1-6-B25T/40-K7/KS7. The temperature controller is suitable for temperature control of tools, machines, and industrial process circuits. According to the nameplate, the heat transfer medium is water/glycol. Technical data: Manufacturer: SINGLE Temperiertechnik GmbH Model: STW 150/1-6-B25T/40-K7/KS7 Device type: Industrial temperature controller Year of manufacture: 2016 Country of manufacture: Germany Heat transfer medium: Codj Aa Ng Ijpfx Aiieri Water / Glycol Electrical data: Operating voltage: 400 V Current type: 3~ / PE Frequency: 50 Hz Rated current: 14.8 A Apparent power: 10.2 kVA Temperature control system: STW 150 series for industrial temperature control applications Water/glycol circuit Hydraulic connections for heat transfer medium Pressure gauge Piping and connection fittings Rear connection assembly Equipment: Industrial temperature controller Water/glycol temperature control Electrical main switch Pressure gauge Shut-off valve Hydraulic connections Connecting lines Ventilation openings in the housing Closed industrial housing Transport handle Castors Equipment as shown in the pictures Application areas: Tool temperature control Injection molding machines Plastics processing Mechanical engineering Production plants Process and circuit temperature control Industrial temperature control applications Mold and tool making Dimensions / Transport: Dimensions (L x W x H): not yet determined Unladen weight according to the nameplate: 131 kg Condition: Used Year of manufacture 2016 Optical condition as shown in the pictures Signs of wear and tear due to use are present. Some deposits and signs of wear are visible on the rear connections and fittings. Scope of delivery: 1 × SINGLE STW 150/1-6-B25T/40-K7/KS7 temperature controller Connection assembly and fittings as shown in the pictures Otherwise, the scope of delivery is as shown in the pictures. Shipping or freight shipping possible by arrangement. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 75 bar, total height: 2,591 mm, total width: 2,438 mm, total length: 2,991 mm, temperature: 38 °C, operating pressure: 75 bar, energy consumption: 30 kWh, DESALINATION PLANT HF-RO: ULTRAFILTRATION AND REVERSE OSMOSIS ON A SKID The HF-RO combines hollow fiber ultrafiltration with seawater reverse osmosis. The ultrafiltration removes sediments, colloids, bacteria, and viruses and feeds the reverse osmosis directly, without an intermediate tank. This allows the system to process raw water that would quickly clog a conventional reverse osmosis system with cartridge filters: nearshore seawater, harbor water, river mouths, and water with highly variable turbidity. PERFORMANCE DATA (Design for 36,000 mg/l, 25 °C) - Inlet flow: 5.0 m³/h - Permeate flow: approx. 2.06 m³/h, approximately 48 m³/day with 24-hour operation Crsds Ahqpgspfx Aiisi - Inlet salinity: 250 to 43,000 mg/l (sea, brackish, and river water) - Inlet temperature: +2 to +33 °C - Inlet turbidity: up to 300 NTU, sediment up to 150 mg/l - Permeate: 150 to 500 mg/l, 300 to 1,000 µS/cm, retention rate 99.6% PROCESS 1. Disc filtration: 2 automatic disc filters 2" in duplex operation, 100 µm, backflushing with filtrate and compressed air during operation 2. Hollow fiber ultrafiltration: 4 modules, outside-in, 0.01 µm (100,000 Dalton), filtrate approx. 0.2 NTU, cyclic backflushing with air, the remaining modules continue to produce 3. Reverse osmosis: low-pulsation axial piston high-pressure pump (4.08 m³/h at 63 bar, motor 8.5 kW), 4 RO modules in GRP pressure pipes, max. 65 bar, automatic pressure and flow control CLEANING - integrated CIP for ultrafiltration and reverse osmosis - cleaning tank 2 x 100 l with 7.5 kW heater - 3 pneumatic dosing pumps for cleaning agents and chlorine - programmed disinfection, long-term preservation, and re-commissioning EQUIPMENT - materials: low-pressure ABS, high-pressure 1.4539 and 1.4410 super duplex, high-pressure pump 1.4462 duplex, tanks PP, frame stainless steel - valves in only two nominal sizes, interchangeable pumps, low variety of spare parts - PLC with 15.6" touch panel, Ethernet interface for remote monitoring - control of a frequency-controlled inlet pump - control cabinet 400 V / 50 Hz, approx. 18 to 20 kW, IP65 DIMENSIONS - main skid approx. 1,400 x 1,200 x 2,020 mm (L x W x H) - RO module stand approx. 600 x 550 x 1,990 mm APPLICATIONS Drinking and utility water for coastal and island supply, resorts and camps, desalination of harbor and river mouth water, process water for industry on the coast, emergency water supply, pilot operation for larger projects. SCOPE OF DELIVERY Main skid with disc filters, ultrafiltration, high-pressure pump, CIP system and control cabinet, RO module stand with 4 modules, internal piping and wiring, documentation (P&I, layout, process description). Not included in the scope of delivery (optional): inlet pump, compressed air supply, container housing, transport, installation, commissioning, training. NOTE We will confirm the binding performance after you provide your water analysis. Inspection and functional testing possible before purchase. Purchase or lease-purchase. English brochure available upon request.

Condition: new, functionality: fully functional, Year of construction: 2026, CONSTMACH FIXED 30 is a fully automatic stationary concrete plant specifically designed for medium-scale or long-term ready-mix concrete projects. Manufactured in compliance with CE standards, this plant is one of the top choices for professional users due to its high durability, long-lasting structure, and low maintenance requirements. Its ability to produce all types of concrete in precise proportions provides a comprehensive solution for the wide range of needs in the construction industry. Depending on the type of concrete to be produced in the FIXED 30 model, pan, single-shaft, twin-shaft, or planetary mixer options can be used. The system, which can be equipped with cement silos with capacities ranging from 50 to 500 tons depending on the project scale, facilitates the easy filling of bagged cement with optional blast bunker integration. It also features a customizable design for different climatic conditions; it can be heated with a steam generator and insulation system in cold regions, while cooling systems maintain the optimum concrete temperature in hot climates. Pre-feeding systems that eliminate the need for aggregate feeding ramps increase operational efficiency, while a bucket transport system can be preferred in sites with limited space, allowing for flexible layout plans. Stationary-30 Fixed Concrete Plant Technical Specifications Production Capacity: 30 m³/h Weight: 38 tons (excluding cement silo) Total Motor Power: 125 kW Electric Generator Requirement: 200 kVA Mixer Options: Pan – Single Shaft – Twin Shaft – Planetary Working Area Requirement: 700 m² Aggregate Storage Bunker: 4 x 20 m³ Aggregate Weighing Bunker: 1.5 m³ Aggregate Transfer Belt: 800 x 22,000 mm Mixer Wet Concrete Volume: 1 m³ Cement Weighing Bunker: 600 kg Water Weighing Bin: 300 liters Additive Weighing Bin: 30 liters Air Compressor: 500 liters, 5.5 kW Cement Silo Capacity: 50 – 500 tons Control Type: Fully Automatic What Do We Do at Constmach? Cjdpfxoxpfuio Aiijri Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: new, functionality: fully functional, power: 125 kW (169.95 HP), fuel type: hybrid, color: other, Year of construction: 2026, Equipment: cabin, hydraulics, onboard computer, CONSTMACH FIXED 30 is a fully automatic stationary concrete plant specifically designed for medium-scale or long-term ready-mix concrete projects. Manufactured in compliance with CE standards, this plant is one of the top choices for professional users due to its high durability, long-lasting structure, and low maintenance requirements. Its ability to produce all types of concrete in precise proportions provides a comprehensive solution for the wide range of needs in the construction industry. Depending on the type of concrete to be produced in the FIXED 30 model, pan, single-shaft, twin-shaft, or planetary mixer options can be used. The system, which can be equipped with cement silos with capacities ranging from 50 to 500 tons depending on the project scale, facilitates the easy filling of bagged cement with optional blast bunker integration. It also features a customizable design for different climatic conditions; it can be heated with a steam generator and insulation system in cold regions, while cooling systems maintain the optimum concrete temperature in hot climates. Pre-feeding systems that eliminate the need for aggregate feeding ramps increase operational efficiency, while a bucket transport system can be preferred in sites with limited space, allowing for flexible layout plans. Stationary-30 Fixed Concrete Plant Technical Specifications Cjdpfoxp Uy Usx Aiijri Production Capacity: 30 m³/h Weight: 38 tons (excluding cement silo) Total Motor Power: 125 kW Electric Generator Requirement: 200 kVA Mixer Options: Pan – Single Shaft – Twin Shaft – Planetary Working Area Requirement: 700 m² Aggregate Storage Bunker: 4 x 20 m³ Aggregate Weighing Bunker: 1.5 m³ Aggregate Transfer Belt: 800 x 22,000 mm Mixer Wet Concrete Volume: 1 m³ Cement Weighing Bunker: 600 kg Water Weighing Bin: 300 liters Additive Weighing Bin: 30 liters Air Compressor: 500 liters, 5.5 kW Cement Silo Capacity: 50 – 500 tons Control Type: Fully Automatic What Do We Do at Constmach? Constmach is a leading machine manufacturer serving the construction and mining industries with a wide range of products. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: like new (used), functionality: fully functional, fuel type: electric, Year of construction: 2020, Used crushing and screening plant for sale, backed by the Fabo guarantee; fully maintained and ready for operation. Suitable for processing soft to medium-hard stone, with a high production capacity for sand-rich output. Our plant consists of the following components: 30 m³ rock feed hopper PDK-140 primary impact crusher Cubitzer Impact crusher (secondary) 120-series tertiary crusher 2000x6000 mm vibrating screen 800x4000 mm conveyor belt 800x20000 mm conveyor belt 800x12000 mm conveyor belt 600x15000 mm conveyor belt 600x10000 mm conveyor belt 600x10000 mm conveyor belt Crjde Ah E Evepfx Aiiji

Year of construction: 2026, condition: new, functionality: fully functional, FTS 15-60 is a compact and heavy steel structured trucked plant with three-decks screen. Also integrated with tracked moving system and robust structure. Works via conveyor belt system. The fully electrically driven plant is designed in a variety for maximum capacities and suitable for feeding materials with a maximum edge length of 200 mm. All functions, as well as subsequent and previous crushing plants, conveyor belts, etc. are electrically lockable. • Production capacity: 500-600 TPH • Screen dimension: 1550x6100mm • Mobile three-decks screen Crsdpfx Aie Ahyatoiji • Diesel electric drive • Classifier screen plant up to 4 final fraction sizes Maximum feeding size 100 x 160 mm

Condition: used, Applicable material: Water Skid-Mounted Reverse Osmosis Water Treatment System Integrated industrial water treatment installation combining reverse osmosis, chemical dosing and associated tanks, pumps and instrumentation. Mounted on a stainless steel frame and equipped with a control cabinet featuring a Siemens SIMATIC HMI operator panel. Crjde Ahyhzjpfx Aiisi System components: Reverse osmosis unit with horizontal membrane housings. Two dosing pumps. Air compressor. Buffer tank. Salt/brine tank. Associated pumps and pipework. Pressure gauges, flow meters and various valves. Electrical control cabinet with Siemens SIMATIC HMI. Stainless steel support frame. Overall dimensions (L × W × H): approximately 3,500 × 1,300 × 2,000 mm. Online auction of detergent processing equipment, soap and powder manufacturing (e.g. SAGAFLUID mixer, AIRJET bag filters, paddle mixers, SIEMENS Milltronics weighing, VEGA level measuring etc.), many s/s storage tanks 5x 100m3, 3x 75m3 etc., workshop and spare parts, logistics, laboratory and offices due to partial relocation and plant closure of the renowned Lagarto Euroquimica at Zaragoza in Spain. The online auction opens Tuesday 3 November and closes Tuesday 24 November. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing days are on: - Tuesday 10 November - Monday 23 November Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Year of construction: 2026, condition: new, FABO Mobile Scalper screen is produced for aggregate producers who require higher productivity and versatility. The machine can be used for multiple purposes; it can be used as a heavy-duty incline 2 deck screen, capable of stockpiling, scalping before and after crushing units, or it can be used a standalone system as well. That is why FABO tracked mobile scalpers can separate the hardest materials. FABO Mobile Scalpers helps our customers to maximize productivity while on the other hand helps on reducing the production costs. - - - Technical Specifications of the Tracked Scalper Screen: - *Bunker capacity :7m³ - *Production capacity : 220 – 400 Tons per hour - *Vibrating Screen Size : 1530x4800 mm Codpfx Aiozfp Daoijri - *Total Power : 110 kvA - *Screen Media : Punch Plate, Grizzly, Bofors - *Weight : 31.000 kg - *The screen angle varies between 18-27°.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, TECHNICAL DETAILS Process Flow Continuous feeding of copper wire via an automatic double unwinder with flying splice capability Inductive wire preheating for moisture removal and improved adhesion Full insulation using a Rosendahl Automotive main extruder and a highly precise crosshead die Cooling and extraction Multi-stage, temperature-controlled telescopic water cooling trough for stress-free solidification of the plastic Synchronized precision caterpillar puller for consistent line speed Quality assurance and winding Laser diameter and ovality measurement Crodjz N A Npepfx Aiiei Eccentricity measurement for monitoring consistent wall thickness High-voltage spark tester for real-time fault detection Uninterrupted winding onto process drums MACHINE DETAILS Machine type: High-speed full insulation line Design: Fully automatic system for thin-walled vehicle lines Year of manufacture: 2020 EQUIPMENT Automatic double unwinder with flying splice capability Inductive wire preheating Rosendahl Automotive main extruder Highly precise crosshead die Temperature-controlled telescopic water cooling trough Precision caterpillar puller Laser diameter and ovality measurement Eccentricity measurement High-voltage spark tester Automatic double spool winder

Year of construction: 2009, condition: good (used), Section of tubular ultrafiltration able to treat about 36 mc/g of product Csdpfstv Dx Esx Aiisri

Condition: new, functionality: fully functional, Year of construction: 2025, For crushing dolomite and phonolite rocks, various types of rock crushing machines can be employed, depending on the characteristics of the rocks and the desired final product specifications. Here are some common types of crushers that may be suitable for processing dolomite and phonolite: 1. Jaw Crusher: - Jaw crushers are commonly used for primary crushing and can handle hard and abrasive materials. They are suitable for both dolomite and phonolite rocks. 2. Impact Crusher: - Impact crushers are versatile and suitable for both primary and secondary crushing. They work by impacting the material with hammers or blow bars, producing a high reduction ratio. Impact crushers can be effective for shaping the final product. 3. Cone Crusher: - Cone crushers are often used for secondary or tertiary crushing. They are suitable for processing harder rocks and can produce well-shaped and fine-grained aggregates. Crodpfx Asq Nyuvoiioi 4. Gyratory Crusher: - Gyratory crushers are used for large-scale primary crushing. They have a conical-shaped head and are well-suited for handling abrasive materials. However, they are less commonly used than jaw or cone crushers. 5. Vertical Shaft Impact (VSI) Crusher: - VSI crushers are suitable for shaping and producing artificial sand. They operate by throwing the material against a set of anvils or impellers to break it down into finer particles. 6. Hammer Crusher: - Hammer crushers are used for crushing softer materials and may be suitable for rocks like phonolite. They operate by applying force to the material, causing it to break along natural fault lines. 7. Roll Crusher: - Roll crushers are used for reducing the size of friable materials. They consist of two counter-rotating rolls that compress the material between them. 8. Screening Equipment: - After the initial crushing stage, screening equipment such as vibrating screens may be used to separate different sizes of crushed material. 9. Dust Suppression Systems: - Crushing operations can generate dust, and dust suppression systems are used to minimize environmental and health impacts. 10. Mobile Crushers: - Mobile crushers, including crawler mobile crushers, offer flexibility and mobility, allowing them to be used directly at the quarry or job site. When selecting a crusher for dolomite and phonolite rocks, consider factors such as the hardness of the material, the desired final product specifications, and the production capacity required. Additionally, it's important to integrate the crushing process into an overall plant design that may include screening, conveying, and washing equipment depending on the specific needs of the application.

Condition: used, Year of construction: 2015, operating hours: 35,000 h, functionality: fully functional, machine/vehicle number: HS6434, path measurement accuracy: 620 mm, type of input current: AC, total width: 620 mm, total length: 3,820 mm, total height: 700 mm, overall weight: 300 kg, input voltage: 230 V, The Cox & Plant HS6434 is a high-performance, industrial-grade electromagnetic vibratory conveyor designed specifically for the hygienic handling of bulk solids, particulates, and fragile products. Manufactured in 2015, this unit represents the pinnacle of Cox & Plant’s specialist engineering in efficient, low-maintenance food and chemical processing technology. Utilizing a precise 6mm stroke amplitude driven by heavy-duty electromagnetic coils, the system offers instantaneous start/stop control and eliminates the mechanical wear components (like belts, bearings, and eccentric drives) common in traditional conveyors. Cedpfx Ajzz Ax Asiijri

Condition: excellent (used), 1 x Oddy Novatek 2 Roll Plant Cjdsy Hk Daspfx Aiiori

Condition: new, functionality: fully functional, fuel type: electric, Year of construction: 2026, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE COMPACT series Stationary Concrete Batching Plants provide satisfaction of all levels need with practical and effective solutions. Stationary concrete batching plants can easily and efficiently reach high capacity production of homogeneous concrete mixture. COMPACT series have easy operating system and lowest investment costs. In addition, the plant provides the use of enterprise resources accurately, so that gaining time-saving will transform to more earnings. . TECHNICAL SPECIFICATIONS: Model: COMPACT 110 Production capacity: 100 m3 Mixer type: Twinshaft – 2 m3 Aggragate bunker: 4x20 m3 Cement weighing: 900 kg Additives weighing: 40 kg Cjdpfx Ais Ahhcgsijri Water weighing: 700 lt Cement silo is optional. COMPACT 110 consist of: • Aggregate Storage Hopper • Aggregate Weighing Hopper • Aggregate Transfer Conveyor or Bucket System • Twinshaft Mixer • Mixer Chassis, Walking Platforms, Ladder • Water Weighing Hopper • Cement Weighing Hopper • Admixture Weighing Hopper • Air Compressor • Cement Screw Conveyor • Bolted Cement Silo • Top Filter, Safety Valve and Accessories • Control Cabinnet • PC and Automation System • Control and Power Panel FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: new, functionality: fully functional, fuel type: electric, color: other, Year of construction: 2026, At FABO, we design and install stationary type stone crushing and screening plants tailored to meet our customers’ specific requirements. The production capacity of our stationary plants varies between 100 and 1000 tons per hour. Crushing & Screening Plant with 250–350 TPH Capacity: • TBX-35 / Vibrating Feeder Bunker – 1 unit • TE-1430 / Intermediate Screen (1400x3000 mm – 2 decks) – 1 unit • PDK-130 / Primary Impact Crusher – 1 unit • TE-2060 / Washing Screen (2000x6000 mm – 3 decks) – 1 unit • TK-100 / Tertiary Crusher – 1 unit • TE-2060 / Vibrating Screen (2000x6000 mm – 3 decks) – 1 unit • Hydraulic Unit for TK-100 • Hydraulic Unit for PDK-130 Cedoyzxctspfx Aiiori • Conveyor Belt System (widths: 1000 mm, 800 mm, 650 mm) • Control Cabin, Electrical Panel, Control Panel, and Automation System All our products are manufactured with great care and come with a 1-year warranty. Installation and Operator Training are FREE of charge! FOR MORE INFORMATION, PLEASE CONTACT US!