Used Waste for sale (3,594)

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,000 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 45 kW (61.18 HP), year of last overhaul: 2025, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see video for the machine function test. Chodpfxox A U Ncs Ab Tsf

Condition: used, Year of construction: 2018, Single Shaft Shredder Weima Model: WLK2000 Main Motor: 110kW Cjdex A Uk Hepfx Ab Tehf Rotor Diameter: 370mm Rotor Length: 2000mm Weight approx.: 9000kg Rotor knives size: 40x40x23mm

Condition: good (used), Year of construction: 2002, functionality: fully functional, Vertical baler HSM VL 600, year of manufacture 2002 Technical data: Cjdox A Ur Djpfx Ab Tohf Manufacturer: HSM Model: HSM VL 600 Year of manufacture: 2002 Pressing force: 60 t Drive power: 7.5 kW Cycle time (idle): 37 s Filling height: 1130 mm Filling opening: 1150 x 735 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Machine weight: 3575 kg Materials: Paper, cardboard, film Note: The operating manual is available. Please note: All technical data is based on manufacturer specifications. We do not accept liability for the accuracy of the information provided or for any possible errors. Offers are subject to change, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. Sale ex location, without warranty or guarantee. Our payment terms are 100% advance payment.

Year of construction: 2016, condition: used, Serial number: 01-Fxxxx Please contact ATS Norway for more information Please provide reference number upon request: 21955 Specifications: 2016 model Hours: Cjdpex A R Uzsfx Ab Tshf 90 kW Undercarriage (see photos) 3 fractions Steel on feeder See video Delivery by agreement Description:2016 Keestrack Frontier screening plant.The hours will increase as the machine is in daily operation.Delivery by agreement. Own weight: 111 Model: Frontier sorteringsverk. SE VIDEO

Condition: good (used), Heidelberg Eurobind 500 Perfect Binder Machine in very good condition, low mileage, ready for operation. From a state-owned printing house. Manufacturer’s description: Professional binder for perfect paperback binding. This fully automatic binder features an exceptionally sturdy design and is equipped with a hot glue gun, making it effective even for small and very small quantities of booklets or pages. The Heidelberg Eurobind 500 is a single-jaw binder with automatic cover feeding, which, operated by a single person, delivers impeccably bound books of consistently high quality. It binds books with a thickness of 2 to 50 mm and a spine length of 120 to 320 mm, with a maximum output of up to 500 books per hour. Integrated milling cutter Automatic cover feeding and creasing. The set includes documentation, waste extraction, a compressor, and an electric book delivery system. Codpfox A Sb Nsx Ab Tehf

Condition: used, mileage: 37,310 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,000 kg, first registration: 08/2023, loading space length: 1,387 mm, emission class: euro6, color: grey, number of seats: 3, total length: 4,904 mm, total width: 1,904 mm, total height: 1,980 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 0757. X001889 ----EQUIPMENT Registered as truck (N1) * Towbar, fixed - incl. trailer stabilization * Seat configuration - 5. Armrests: Armrests for left seat in driver's cab * Seats 1st row: front double passenger seat bench on the right with lockable compartment under seat * Suspension: Rear suspension reinforced * Windows (glass in cargo/passenger area) - Front side windows in heat-insulating glass, rear side windows and rear window tinted (privacy) * Gross weight: Permissible gross weight 3000 kg * Cruise control including speed limiter * Rear window with heat-insulating glazing, heated, and rear window wiper/washer system * Interior lighting with LED technology in cargo/passenger area - entry lighting in the tailgate * Paint: Solid * Package: Comfort Package Plus - 2x 12-volt sockets - Manual air conditioning in cab - Seat upholstery fabric, design "Bricks" - Waste bin for door compartments in cab - Additional soundproofing in cab - Height adjustment for left single seat in cab - Glove compartment with lighting - Sun visors with mirrors and airbag label on passenger sun visor - Entry grab handle on A-pillar, driver and passenger side - Lumbar support for left single seat, manually adjustable in first row * ParkPilot front and rear * Radio "Composition Colour" with 6.5" touchscreen, 2 USB ports (type C) in dashboard, 4 speakers: 2 tweeters, 2 woofers, App-Connect * Driver assistance systems: Rear view camera "Rear View" (static guidelines) * Sliding door in passenger/cargo area: sliding door left * Flooring: Universal floor in passenger/cargo area - Universal floor in cargo area with loading sill protection rear - Step lighting in passenger/cargo area * Registered as a truck without seats in passenger area - Commercial vehicle type plate with EU type approval, with weight specification, with COC documents - No seats in second row - Registered for up to 5 seats * Airbag for driver and passenger - with passenger airbag deactivation - Seatbelt tensioners for outer seats * All-wheel drive 4MOTION (permanent) * Exterior mirrors electrically adjustable and heated * Exterior mirrors, left and right convex * Hill-start assist * Third brake light * Heat-insulating glazing green * Rev counter * Seatbelts: 3-point automatic seatbelts, height-adjustable on outer seats in cab * Brake systems: Electronic Stabilization Program, ABS, ASR (with deactivation button), EDS, Hill-start assist - Brake assist * Chassis: 16" chassis with 16" brake system * Windows: Heated rear window * Power windows * Transmission: DSG (dual-clutch gearbox), 7-speed automatic * Flooring: Rubber flooring in cab * Glove compartment with lighting * Storage compartments - Glove compartment with lockable lid * Tailgate with window cutout * Child safety lock, electrically operated * Front headrests, height adjustable * Fuel tank with 70 l capacity Cedpfxjx A N Ime Ab Tohf * Headlight range control * Multi-collision brake * Non-smoker specification, 12-V socket and cup holder in the dashboard * Radio accessories: Digital radio reception DAB+ * Tire pressure monitor * Particulate filter: Diesel particulate filter including SCR and AdBlue tank * Sliding door in passenger/cargo area: sliding door right * Windows: Fixed side window in cargo/passenger area

Condition: ready for operation (used), functionality: fully functional, Brand: HSM Cedpfx Aboxnzf Ie Tshf Model: VK 20/1200 Motor: 11 kW Final bale size: 700 x 800 mm Bale weight: 200–350 kg

Condition: used, Year of construction: 2018, Single Shaft Shredder Weima Model: WLK2000 Main Motor: 110kW Rotor Diameter: 370mm Chodpjx A Uiiefx Ab Tsf Rotor Length: 2000mm Weight approx.: 9000kg Rotor knives size: 40x40x23mm

Condition: used, machine/vehicle number: 14003, Rotor diameter: 300 mm Rotor width: 600 mm Rotor knives: 3x2 Stator knives: 3 Feed opening approx. 300 x 600 mm Drive motor: 18.5 kW Chodpfjx Aw Afox Ab Tjf

Condition: used, Field of application: Mining - Tamis Giratoire Codpfx Aex Au Swsb Tshf

Year of construction: 2010, condition: used, Case maker Kolbus DA 270 Year: 2010 For fully automatic production of book cases, files, display cards, calendar backs or game boards. Description: - Automatic setting - Motorised setting - Automatic case counter - Board pre stacking conveyor: 1700 mm - Board cutter: PS Chsdpfx Abex Ary Eo Tof - Centre strip infeed (flexible) - Waste chopper - Cloth feeder: Non-Stop - Glue unit - Preheated glue tube - Viscosity control - Device for inside lining with hotmelt - Device for producing padded cases - Pressing station - Stacking delivery Max. mechanical speed: up to 65 cycles/min Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 140 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2009, total width: 1,220 mm, total height: 1,900 mm, total length: 1,750 mm, Empty weight: 600 kg Price: On request Cedox Aqu Iopfx Ab Tehf - Details: - └ Description: With drain guide - Year: 2009 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Transport dimensions: 1750mm x 1220mm x 1900mm (l x w x h) - Transport weight [kg]: 600kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2021, CNC Gantry (Portal) flexible machine (Through-feed panel in horizontal position) Numerical Control Open powerTouch, Software WoodWOP (Ready for TAPIO) In-feeding working table (panel support) + Out-feeding working table (panel support) Panels (workpieces) feeding by No. 3 motorized conveyor belts Minimum workpieces dimensions (X - Y - Z) mm 250 x 100 x 12 Maximum workpieces dimensions (X - Y - Z) mm 2500 x 1050 x 60 Lateral Guide for sensitive Workpieces edges No. 3 Vertical Pressure Clamps Motorized carpet to evacuate chips and wastes. Built-in electric and command cabinet Total installed power: Kw 47 approx OPTIONAL: WIRELESS BAR CODE SCANNER N° 2 WORKING GROUPS (TOP) - (SERVO-MOTOR for X-Y-Z axis ): N° 4 Drilling heads V15 (4 x Kw 2.3) with No. 15 vertical spindles each (total top spindles No. 60) N° 3 WORKING GROUPS (BOTTOM) - (SERVO-MOTOR for X-Y-Z axis : Codpsx Aqi Eofx Ab Tjhf N° 3 Drilling heads V32 (3 x Kw 2.3) with No. 32 vertical spindles each (total bottom spindles No 96) N° 3 Drilling heads V35 (3 x Kw 2.3) with No. 35 vertical spindles each (total bottom spindles No 105) N° 6+6 (total 12) horizontal drilling spindles in Y-axe N° 2 WORKING GROUPS (HORIZONTAL) N° 2 Drilling heads H21 (2 x Kw 2,3) with horizontal spindles N° 21 Horizontal drilling spindles (Right Side) + N° 21 Horizontal drilling spindles (Left Side)

Condition: good (used), functionality: fully functional, Year of construction: 2011, laser power: 5,000 W, CNC Laser Cutting System TruLaser 5030 (L16) 5000 Watt X Working Area max.: 3000 mm Y Working Area max.: 1500 mm Z Working Area max.: 115 mm Control: Siemens Sinumerik 840D SL Laser Power: 5000 Watts Operating hours: 56,521 h Laser on time: 23,563 h Sheet thickness St. max.: 25 mm Sheet thickness Va. max.: 20 mm Sheet thickness Al. max.: 12 mm Standard equipment: - Enclosed machine frame with integrated laser unit - Motion unit for high-precision machining - Gantry drive in combination with linear direct drives - Enclosed beam guidance - Single cutting head strategy - Cooling unit KKW Riedel from 2003 - TFT color display - Longitudinal conveyor for small parts and waste - Automatic pallet changer - Work area lighting - Positioning laser diode - Oil spray device - Piercline - FocusLine - NitroLine - PlasmaLine Chodpfx Aex Ap Sfob Tsf - CO2 laser TruFlow 5000 - Maintenance-free turbo radial blower - Cutting head with 250mm lens - Universal quick-change unit (UTI) with bus connection - ControlLine: Height control and sheet edge detection - SINUMERIK 840D - Automatic shutoff - ConturLine - FastLine - FlyLine - Microweld - USB interface - RJ-45 network connection - CE marking - Light barriers - Multi-chamber extraction system - Compact dedusting unit - High-speed cutting head 175mm focal length

Condition: used, machine/vehicle number: 12916, Rotor diameter: 350 mm Cjdewbwq Nopfx Ab Tjhf Rotor width: 450 mm Rotor blades: 3 Stator blades: 2 Inlet cross-section approx. 350 x 450 mm Drive motor: 18.5 kW

Condition: used, Field of application: Mining Technical documentation Description of the unit Chjdpfjx Atmaox Ab Tjf Micronisation unit - Bepex Pulvocron PCS 10 mill and classification The Pulvocron air classifying mill utilizes high-speed impact and internal particle size classification to produce fine powders with a narrow size distribution. Adjustable operating conditions, including tip speed, air flow, and classifier speed provides control over resultant particle size, material temperature, and capacity. Thermally conditioning the inlet air stream provides optional heating to simultaneously dry and mill wet solids, or cooling to reduce resulting material temperatures. Air and powder filtration / recycling system. – Product filtration and collection cyclone – Explosion proof valve – Rotary air / product sealing valve – Product recovery hopper Additional information Regular maintenance and servicing. Full Documentation available. Incomplete electrical and safety control cabinets. These items can be quoted separately.

Year of construction: 2015, operating hours: 1,100 h, condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21932 Specifications: Year: 2015 Hours: approx. 1100 (may increase) Weight: 26,500 kg Power: 54 kW Hopper: 6 m³ Central lubrication Remote control Single owner 3 tires Service history available Chsdpfxex Anbfj Ab Tsf Ready for delivery Description:Well-maintained Keestrack screening plant with only 1100 hours. The machine has run only 1100 hours, but the hours may increase. It is a zero-emission machine with mains power capability. The machine has had a single owner, and full service history is available. Hours: 1100 Own weight: 26500 Kw: 54 Model: Combo Eco Sorteringsverk. 1100 timer! SE VIDEO

Condition: excellent (used), Provisur Coater TST Coating machine Stainless, high volume throughput waterfall coating machine, maximises coverage to the right thickness while reducing excess waste, stainless mesh belt 1700mm x 600mm, recirculation pump, variable speed conveyor, adjustable flow, 3Ph Three in stock Codpfxjx Ak Rvo Ab Tshf

Condition: excellent (used), Year of construction: 2021, Angular sawing plant Numerical Control PowerControl V2.1 - CADmatic 5 (Tapio ready) No. 1 Rollers table for pre-loading (useful mm 2200 x 4500 approx) Lifting table (mm) 4300 x 2200 1st Rear-pusher, with No. 4 clamps/grippers Cjdpsx Aqdcsfx Ab Tehf 1st Panel Saw - Max cutting width mm 4300 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min 2nd Rear-pusher, with No. 8 clamps/grippers 2nd Panel Saw - Max cutting width mm 2200 Max blade projection (mm) 125 Scoring Unit (max. diameter saw / power) mm 180 (Kw 2,2) Main Sawing Unit (max. diameter saw / power) mm 450 (Kw 28) Adjustable speed of the saw carriage (m/min) 1 - 150 m/min No. 2 Front supporting tables with Air blowing system (2 x mm 800 x 2810) Total installed power A 102 OPTION: No. 1 Waste grinder

Condition: used, machine/vehicle number: 11629, Rotor diameter: 450 mm Csdpfxsghgqas Ab Tshf Rotor width: 800 mm 5 x 5 blade rotor (offset) 2 rows of stator blades Inlet cross-section approx. 600 x 800 mm Drive motor 55 kW With soundproof box, mobile

Condition: used, Year of construction: 1996, Empty weight: 900 kg Manufacturer : Marchesini Model: MS 235 / AS 237 / BA 50 Cjdpfjx An Ncox Ab Tohf Year : 1996 Type : 4-seal pouch packaging line for powders. 1. Bagging machine Vertical automatic machine with intermittent movement for filling and sealing bags, for medium and high speed production lines, for powders. Volumetric shaving filler Mechanical speed: 100 strokes/min Range of formats : max reel outer diameter: 400 mm (800 mm with reel) max reel width: 800 mm (820 mm with waste) bag length: 60 to 120 mm Reel support trolley Hopper handling trolley Weight: 2100 kg 2. sachet counting unit 3. Cartoning machine Capacity : 70 cartons / minute Dimension A = 40 - 145 mm Size B = 20 - 80 mm Size H = 70 - 190 mm A+B = 190 mm Weight: 900 kg

Condition: used, machine/vehicle number: 14018, Rotor diameter: 500 mm Rotor width: 1000 mm Rotor knives: 5 x 2 Codpfsx Alh Ajx Ab Tjhf Stator knives: 2 rows Infeed opening approx. 600 x 1000 mm Drive motor: 45 kW

Condition: used, Field of application: Mining Power: 11 kW (15 HP) Manufacturer: Forplex Model: FL2 Year: +/- 1985 Type: Hammer mill / Fine impact mill Materials: stainless steel Motor power: 11 kW (1500 rpm) Rotor: hammer plate Hopper Bag filter Maximum filtration air flow: 1200 m3/h Minimum filtration surface area required: 8m2 Cjdpfx Abox Akd Ne Tjhf Refurbished by our teams: - Seals: new - Mill bearings: new - Motor and mill pulley: new - safety device: key + lock + electrical box case: new (Allen Bradley Guardmaster) Static load: 240 kg Dynamic load: 720 kg

Condition: used, machine/vehicle number: 13293, Rotor diameter: 450 mm Rotor width: 1000 mm Chsdpewmg Smjfx Ab Tjf Rotor blades: 9 rows Stator blades: 2 Drive motor: 75 kW

Condition: used, machine/vehicle number: 13213, Rotor diameter: 600 mm Rotor width: 1000 mm Cjdpfxowbwxmj Ab Tehf Rotor blade rows: 7 Stator blade rows: 2 Inlet cross-section approx. 720 x 980 mm Drive motor: 90 kW