Duct Fan Extraction

Coral PAP HP20

Condition: new, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Load circuits: 1 or 2 as standard Temperature range: - 45°C to +130°C Medium: water / glycol mixture Tedpog Ezarsfx Amyoa Dimensions LxWxH (without connections) : 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300kg 2-circuit: approx. 1500kg *HIGHLIGHTS EQUIPMENT: -Controls: Temperature control (standard) -Control via SPS with touch screen -Analogue and digital interfaces -Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) -Heating control via solid-state relay (SSR) -Flow measurement in the internal circuit for flow monitoring (INFO: If the water/glycol mixture is incorrect, the system automatically warns and switches off in the next step) -Pressure-controlled cooling water regulator (INFO: Much more accurate than temperature controls) Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metal) (non-ferrous metal-free optional) All medium-carrying components and piping insulated for low-temperature application -Water-cooled condenser (air-cooled on request). *OPTIONS: -flow rate control: up to 100l/min, >4 l/min +/- 5% of measured value -Pressure control: 0.5 to 4.5 bar (control range) -compressed air monitoring -test piece emptying by means of compressed air - Cooling water monitoring -Limitation of inlet pressure -Other special options available on request and after technical inspection Visit our website for more details or for other performance classes. *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, plate thickness 1,2 mm roll diameter 62 mm throat 100 mm total power requirement 0,75 kW Todpfx Amjfv H Edeyja weight of the machine ca. 130 kg dimensions of the machine ca. 1,1 x 0,5 x 1,3 m Flanging machine is equipped with: - Emergency switch - Footswitch - 7 pcs. Roll sets

Condition: used, Used Copeland ZR19M3E-TWD-561 scroll compressor on Freon with a sight glass. The compressor has a displacement of 42,8 m³/h. Tedpfx Amerlk Amsysa

Condition: excellent (used), We offer a selection of high-quality refrigeration compressors from Bitzer and Dorin, available immediately. Ideal for industrial applications, refrigeration, and air conditioning systems. Item No.: Kühl 016 Manufacturer: Bitzer Model: 4JTC-15K-40P Equipped with EMERSON OM4-120 oil level monitoring Semi-hermetic Refrigerant: R-744, CO₂ for transcritical applications Displacement: 9.2 m³/h Max. operating pressure (LP/HP): 75/130 bar Quantity in stock: 2 units Item No.: Kühl 018 Manufacturer: Bitzer Model: 4HTE-20K-40P Equipped with EMERSON OM4-120 oil level monitoring Semi-hermetic Refrigerant: R-744, CO₂ for transcritical applications Displacement: 12 m³/h Max. operating pressure (LP/HP): 100/160 bar Todeyx U Hvopfx Amysa Quantity in stock: 1 unit Item No.: Kühl 024 Manufacturer: Dorin Model: CDS151B Equipped with EMERSON OM4-120 oil level monitoring Semi-hermetic Refrigerant: R-744, CO₂ Displacement: 2.53 m³/h Max. operating pressure (LP/HP): 31/95 bar Quantity in stock: 1 unit Item No.: Kühl 025 Manufacturer: Dorin Model: CDS301B Equipped with EMERSON OM4-120 oil level monitoring Semi-hermetic Refrigerant: R-744, CO₂ Displacement: 4.34 m³/h Max. operating pressure (LP/HP): 31/95 bar Quantity in stock: 1 unit Immediate availability – no waiting times for delivery Premium brand compressors Prices on request! Shipping available

Condition: like new (used), functionality: fully functional, Dowel inserting machine with operating gun for simultaneous glue application and dowel insertion Standard dowels Ø8 mm Dowels lenght 25 - 80 mm Nominal capacity 1 dowel/second (includes glue application) Uses PVA adhesives (glue) in water dispersion viscosity 200-400mPa 1 pcs TANK FOR GLUE capacity 8 kg 1 pcs TANK FOR WATER capacity 8 kg Todpsqu N U Djfx Amyea Maximum pressure 5 bar

Condition: used, Year of construction: 2011, operating hours: 6,763 h, functionality: fully functional, Sweeper-scrubber machine Technical condition: good Todeukrcpepfx Amyja Transmission: Hydrostatic; Front tires: 2 x superelastic; Rear: 1 x bandage wheel; Power steering; Front windshield; 2 x front/ StVZO-like AS; Overall height ready to operate: 2300 mm

Condition: as good as new (ex-display), Year of construction: 2026, Compact wide-belt sanding machine with combination sanding unit Promotional features: - Switching the sanding pad on and off from the control panel - Switching the roller on and off from the control panel - Electronic control system Fox 500 KTR - Table extension with 2 rollers, with infeed and outfeed - Automatic table positioning with push button Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipment includes a diagonally grooved steel roller, Ø 120 mm, for calibrating Fine adjustment of the working height Tsdpfx Aogf Sw Nsmyoa Clear control panel on the front Robust, tubular-reinforced monoblock steel machine body, robot-welded, with work units mounted high up for maximum rigidity Motorized height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via geared motor with two speeds Natural rubber feed carpet with a negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers, in front of or behind each work unit Pneumatic belt tensioning per unit with decimal correction option for grit size/belt thickness Universally applicable for solid wood and veneer thanks to the combination unit Entry-level model for smaller companies Working width 950 mm Equipment details: Combination unit for calibrating and sanding Diagonally grooved steel roller, Ø 120 mm, with fine height adjustment Hard sanding pad with graphite pad Universal design for calibrating and sanding solid wood, chipboard and veneer Technical data Length (product) approx. 1388 mm Height (product) approx. 1668 mm Width/Depth (product) approx. 1545 mm Connection for dust extraction Dust extraction nozzle diameter 140 mm Electrical data Connection voltage 400V Current type AC Phase(s) 3Ph Mains frequency 50Hz Power feed motor 0.33 / 0.55 kW Power height adjustment motor 0.25 kW Power drive motor 7.5 kW Sanding unit Sanding belt length 1525 mm Sanding width max. 950 mm Sanding belt width 970 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Workpiece height min. 4 mm Workpiece height max. 170 mm

Condition: excellent (used), Year of construction: 2010, COMEVA MB 500 Planer/Jointer Working width: 510mm 4-knife cutterhead Traditional knives Length of work tables: 2630mm Adjustable fence, tiltable at 45° Motor power: 4kW Smoothing combs Tsdsiwa Spjpfx Amyea CE certified

Condition: excellent (used), Year of construction: 2007, operating hours: 14,706 h, functionality: fully functional, type of input current: three-phase, type of cooling: water, overall weight: 2,300 kg, input voltage: 400 V, total width: 2,222 mm, total length: 4,700 mm, total height: 2,150 mm, empty load weight: 3,580 kg, (Offer: price already reduced by 20%) Used water chiller. Brand: Climaveneta. Air-cooled water chiller, 252 kW (216720). Model: FOCS/SL 1542 Cooling Only, R134a refrigerant. Equipped with 2 Bitzer compressors, 1 shell and tube heat exchanger, and 6 axial fans. Power consumption: 133 kW. The chiller is supplied with its factory gas charge and has been serviced. Reference: 1055 Todjvpgpxopfx Amyja

Condition: new, Type DTW-60A Tedpfsd Tqt Njx Amyoa Horizontal three axis Brush roll height 300/300 mm Brush roll diameter 300 mm Roller speed: frequency control Power 1.5 kW Transport dimensions 1220x720x900 mm Weight 150 kg Price for spare sanding strip (brushes with sanding paper) 3,6 € + VAT / 1 m