Used Voltage Stabilizers for sale (14,970)

Condition: used, mileage: 457,000 km, power: 375 kW (509.86 HP), first registration: 07/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2026, brakes: retarder, color: orange, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, navigation system, parking heater, Mercedes 2651 K / 6x4 / Retarder / Meiller Bordmatic / new clutch 1 year ago / gearbox overhauled 2 years ago, etc. Trailer brake: 2-line system, 220 Ah battery, batteries arranged one above the other, air horn, suspension: rear springs 2x13.0 t, suspension: front springs 7.5 t, 2-leaf, transmission 12-speed - Type: G 330-12, construction-site spec rear lights, rear axle with 300 mm crown wheel, hydraulic pump (Meiller pump - 7 pistons - 275), interior filter for construction vehicles, aluminium chequer plate mudguards, fuel tank: 290 ltr. steel, left side, side air intake at driver's cab, reinforced engine brake, spare wheel, retarder, rotating beacons left/right, reinforced rear crossmember, automatic circuit breaker, cab seats: passenger seat with armrest, cab seats: driver’s seat as air-sprung comfort seat, cab seats: foldable driver's seat backrest, external sun visor, voltage converter 24V/12V 10 A, steel rims 11.75x22.5 (on front axle), steel rims 9.00x22.5, external left storage hatch, additional 24V socket in passenger footwell, road paver package, foldable rear underrun protection, CB radio prep, straight front axle, increased ground clearance, curtain for sleeper cab, auxiliary heater (water), twin-disc clutch. Dodpfx Acoydthus Necc Emissions standard EURO 6, ABS switchable, axle configuration: 6x4, front axle load 7.5 t, trailer socket 24V / 15-pin, Arocs, audio system: radio with USB port, electrically adjustable and heated exterior mirrors, rear axle differential lock, compressed air connection in cab, steel air tanks, cab: width 2.30 m, cab: movable entry, cab: hydraulic tipping mechanism, cab: L ClassicSpace, cab floor with 170 mm engine tunnel, suspension: leaf/leaf, electric windows, tinted windscreen, generator 100A, urea tank (AdBlue): 60 ltr., manual roof hatch (steel), info display 10.4 cm, interior filter: pollen filter, bodywork: tipper, lower comfort bunk, non-regulated steering pump, 2-cylinder air compressor, heated air dryer, engine: 12.8 ltr. - 375 kW inline 6 diesel (OM 471), engine compartment encapsulation, PTO MB 131-2c, wheelbase 3300 mm, ramp mirror, residual heat utilisation, rear window, full-protection disc brakes, disc brakes front and rear axles, seat trim/upholstery: fabric, cab seats: functional passenger seat, front axle stabilizer, 24V socket in cab, tachograph / EC recording equipment, toll recording prep, controlled water pump, gross vehicle weight 26.0 t, gearbox oil cooler.

Condition: excellent (used), Netzsch Model: Netzsch TG 209 F3 Tarsus NETZSCH Proteus® Software for Thermal Analysis included. Description: For sale is a NETZSCH TG 209 F3 Tarsus thermogravimetric analyzer (TGA) manufactured in Germany. This device is used in laboratories, research, development, and quality control for thermogravimetric analysis. Thermogravimetry measures the change in mass of a sample as a function of temperature and time. This method serves, among other purposes, for assessing thermal stability, decomposition processes, moisture and solvent content, as well as filler and ash fractions. The TG 209 F3 Tarsus is a robust, high-precision instrument designed for industrial and research applications—not a hobby or DIY device. Typical fields of application: - Plastics and polymer analysis - Chemical & pharmaceutical industry - Materials research - Quality control - Research & development Software / Data Analysis: The scope of delivery includes NETZSCH Proteus® software for thermal analysis. The Proteus® software is used for device control, data acquisition, and evaluation of thermogravimetric measurements (TGA). Key features include: - Control of measurement programs (temperature profiles, heating rates, dwell times) - Recording of mass changes as a function of temperature and time - Graphical representation of measurement curves (TG, DTG) - Evaluation of decomposition stages, mass losses, and residual masses - Data export for documentation and further processing The software package includes (see photos): - Original NETZSCH Proteus® installation media - Printed software and device documentation - NETZSCH USB dongle (hardware license key) System requirements (according to documentation): - Microsoft Windows 7 / 8.1 / 10 (Professional or Enterprise) Dcedpfx Acjyamzas Njc Technical specifications (approximate values): Manufacturer: NETZSCH (Made in Germany) Model: TG 209 F3 Tarsus Measurement principle: Thermogravimetric Analysis (TGA) Temperature range: Ambient to approx. 1000 °C Heating rate: approx. 0.1 – 50 K/min Max. sample weight: approx. 1 g Balance resolution: up to approx. 0.1 μg Gas operation: Air / Inert gas (e.g., nitrogen) Mains voltage: 230 V AC / 50–60 Hz (switchable to 115 V) Power consumption: approx. 1.0 – 1.2 kW Dimensions (W×D×H): approx. 45 × 55 × 35 cm Weight: approx. 40 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See photo) (Specifications are subject to change and errors excepted!) For further questions, feel free to contact us by phone.

Condition: used, mileage: 42,500 km, power: 368 kW (500.34 HP), first registration: 06/2025, fuel type: diesel, number of seats: 53, gearing type: automatic, axle configuration: 6x2, overall weight: 26,000 kg, empty load weight: 17,724 kg, maximum load weight: 8,276 kg, fuel consumption (urban): 1,407 l/100km, emission class: euro6, color: red, suspension: air, tire size: 315/80 R22,5, total length: 14,070 mm, lifting height: 4,000 mm, Equipment: ABS, air conditioning, bathroom, cruise control, navigation system, parking heater, Unladen weight: 17,724 kg, permissible gross weight: 26,000 kg, partial leather, tire size: 315/80 R22.5, 1st axle: , 2nd axle: , 3rd axle: , interior color black, air suspension, passenger compartment air conditioning, driver’s area air conditioning, stop request button, luggage nets, leather steering wheel, electronic stability program ESP, level control, kneeling, radio, audio interface, sound system, power steering, tire pressure monitoring, carpet flooring, central locking with remote control, tinted windows, electrically adjustable and heated exterior mirrors, digital tachograph, electronic braking system EBS, ski rack, roof hatch, central lubrication, twin tires, brake assist, reversing camera, sun visor, WC, speed limiter, TV, microphone, voltage converter, emergency brake assist, double glazing, digital radio reception DAB, digital instrument cluster, non-binding offer, subject to errors and prior sale. Illustration may not correspond to the offer. New number 192978651+1+1 seats, three seat benches to reconfigure to 57+1+1 are available, German, English. Dsdpfx Acjydhc Ts Njcc

Condition: new, - NEW-descriptionCutting plane directly on the saw bladeHeavy steel and cast iron constructionPrecision-guided format sliding carriage made of aluminium,anodized as standardLarge-area table extension guided on a telescopic arm andlongitudinally adjustableExtendable aluminum telescopic fence, angle adjustable with professionalstop flapsRip fence with quick release and fine adjustmentLarge work table made of milled gray cast iron stays permanently flatThe standard table extension and table extension enable easy work with larger workpiecesQuiet running and precise cutsEquipped with a powerful three-phase motorThe large dimensioned cast iron sawing unit is attached twice to the cast iron table and guarantees stability, precision, smooth running and a long service lifeMaximum cutting height is also achieved with the built-in scoring deviceEquipment details:Double cradle saw unitGenerously dimensioned, made of steel/cast ironClose to the saw blade, supported on both sides for precision, smooth running and a long service lifeAdjustable in height and up to 45° with a crankMaximum cutting height is also achieved with the built-in scoring deviceAlso available with scoring unittelescopic stopExtendable telescopic stop up to max. 2550 mmAngle adjustableWith professional stop flapsAluminum sliding carriageWith a thousand times proven ball contact systemInsensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail10-year Holzkraft guarantee on wear and tear on the guidewaysRip fence with round rod guideWith fine adjustment and quick releaseStable round rod guide made of ground steel with a diameter of 45 mmCan be folded down as standard for cutting large workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 380 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmMachine body length 1388 mmWorking area length 1000 mmMachine body width/depth 689 mmWorking area width/depth 2000 mmSpace required length 5118 mmSpace requirement width/depth 3830 mmelectrical dataConnection voltage 400 VDrive motor power 5.0 kWPhase(s) 3 PhNominal operating mode drive motor S6Type of current ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat slide length 2250 mmTable length 840 mmFormat sliding carriage width 270 mmTable width 560 mmFormat sliding carriage height 124 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting height 90° 90 mmMax. cutting width to the left of the saw blade 2310 mmMax. cutting height 45° 63 mmtrimming length 2250 mmSaw blade diameter 315 mmSaw blade inclination 90 - 45°Saw blade speed 4000 rpmArt. No. 5504323Ausziehbarer Teleskop-fence to max. 2550 mmWinkeladjustableMit Profi-AnschlagklappenAluminium-sliding tableMit tausendfach bewährtem KugelkontaktsystemStaub- and schmutzunempfindlich durch minimalen Berührungspunkt zwischen Kugel and Trapezschiene10 Jahright hand Holzkraft-guarantee on abrasion der Führungsbahnenrip fence with round rod guidingMit fine adjustment and quick clampingStabile round rod guiding aus geschliffenem steel with 45 mm diameterSerienmäßig tiltable for den Zuschnitt großer WerkstückeTechnische Daten:dimensions and Gewichteweight (Netto) ca.   380 kgAnschluss Absaugungsuction nozzle diameter   120 mmsuction nozzle diameter Sägeblattschutz   60 mmAufstellinformationenTransportbreite   900 mmErläuterung required spaceDie d... Dedpovyuqfofx Ac Necc

Condition: new, - New-- Cutting plane directly on the sliding carriage- Heavy steel and cast iron construction- Precision-guided format sliding carriagemade of aluminium, anodised as standard- Large table extension on telescopic armguided and longitudinally displaceable- Extendable aluminum telescopic stop,angle-adjustable with professional stop flaps- Rip fence with quick release and fine adjustment- Large work table made of milled gray cast ironremains permanently plan- The standard table extension and table extensionextension make it easy to work with larger onesworkpieces- Quiet running and precise cuts- Equipped with a powerful three-phase motor- The large dimensioned saw aggregateGray iron is doubly fixed to the cast iron table and isa guarantee for stability, precision, smooth running andlong lifetime- Maximum cutting height is also when installedscoring device reachedMade in ItalyEquipment details:Double cradle saw unit- Oversized, made of steel/cast iron- Close to the saw blade, supported on both sidesfor precision, smooth running and a long service life- Adjustable in height and up to 45° using a crank- Maximum cutting height is also when installedscoring device reached- Also available with scoring unittelescopic stop- Extendable telescopic stop up to max. 2550 mm- Angle adjustable- With professional stop flapsAluminum sliding carriage- With a thousand times proven ball contact system- Resistant to dust and dirtminimum point of contact between ball andtrapeze rail- 10-year Holzkraft guarantee against wear and tearguidewaysRip fence with round rod guide- With fine adjustment and quick release- Stable round rod guide made of ground45mm diameter steel- Foldable as standard for cutting large onesworkpiecesTechnical specifications:Dimensions and weightsWeight approx. 385 kgDust extraction connectionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmelectrical dataDrive motor power 5.0 kWConnection voltage 400 VFormat sliding carriage and tableFormat slide length 2600 mmFormat sliding carriage width 270 mmFormat sliding carriage height 124 mmTable length 840 mmTable width 560 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting width to the left of the saw blade 2310 mmtrimming length 2600 mmSaw blade inclination 90 - 45 °Max. cutting height 90° 90 mmMax. cutting height 45° 63 mmDiameter (main) saw blade 315 mmSpeed ??of (main) saw blade 4000 rpmPU 1Scope of delivery:Table extension and table wideningAnodized aluminum format sliding carriageAluminum folding stopsRip fence with round rod guide andfine tuningItem No. 5504326 Dcjdsvyupzepfx Ac Noc

Condition: new, - NEW -- Cutting plane directly on the saw blade- Large dimensioned cast iron saw unit double on the cast iron tablefastened - guarantee for stability, precision, smooth running and long service life- Precision-guided format sliding carriage made of aluminium, standardanodized- 10-year HOLZKRAFT guarantee on wear and tear on the guideways of thesliding carriage- Rip fence with round rod guide and fine adjustment as standard- Large work table made of milled gray cast iron- Quiet running and precise cuts- Enable standard table widening and table extensioneasy work with larger workpieces- Extendable aluminum telescopic fence with angle adjustment andtwo professional folding stops-Made in ItalyTECHNICAL SPECIFICATIONSDimensions and weightsWeight (net) approx. 295 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mminstallation informationTransport width 700 mmMachine body length 802 mmMachine body width/depth 615 mmSpace required length 3860 mmSpace requirement width/depth 2750 mmExplanation of space requirementsThe dimensions take into account maximum travel distances or usable lengthsWorking area length 1000 mmWorking area width/depth 2000 mmExplanation of work areaPlease add the specified dimensions to the space required to calculate theto obtain the recommended free installation space for the ctrical dataConnection voltage 400 VMains frequency 50 HzDrive motor power 4.0 kWRated operating mode drive motor S 6Duty cycle drive motor 40%Sliding carriage and tableFormat slide length 1600 mmFormat sliding carriage width 270 mmFormat sliding carriage height 124 mmTable length 1020 mmTable width 325 mmTable height 860 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting width to the left of the saw blade 1660 mmtrimming length 1600 mmSaw blade inclination 90 - 45°Max. cutting height 90° 100 mmMax. cutting height 45° 79 mmSaw blade diameter 315 mmSaw blade speed 4000 rpmFURNISHINGAnodized aluminum format sliding carriageHandle for sliding carriagetrimming frameSaw rip fence with round rod guideStops Two professional folding stopstrimming shoeeccentric clamptable extensiontable extensionsaw blade guard&nbsp, Dcsdsvyup Uepfx Ac Nec

Condition: ready for operation (used), Year of construction: 2007, controller model: CADmatic 4 - Professional, This HOLZMA HPP 380 panel saw was manufactured in 2007. It features a robust steel saw carriage, main and pre-cut saws, and a patented Central Angle Return Device that reduces cycle time by up to 25%. The machine is equipped with a Power Control CADmatic 4 system, ensuring precise and efficient operation. The saw blade projection is 95 mm, and it operates with a main saw motor of 18.0 kW. For more information about this panel saw, please reach out to us. Additional equipment Dedpfx Acjyaiiye Nscc • Air cushion table with roller element 2160 x 650 mm: 4 pieces • Central blower: 1 piece Machine Benefits Qualitative Machine Benefits • Ce-certified, gs-certified, fph wood dust certified • Division: 75/275/475/1050/1850/2650/3450 mm measured from the angle rule to the center of the clamping collet • 2 additional two-fingered clamping collets possible • 4 manual trimming rakes at clamping collets • 1 additional one-fingered clamping collet possible • Jet spacing of air cushion tables: 70 x 70 mm Technical Machine Benefits • Pre-cut saw motor: 2. 2 kw • Operating voltage: 400 v / 50 hz • Electrical connection value at hs motor: 18. 0 kw = 24 kw, 21. 0 kw = 27 kw • Positioning accuracy: +/- 0. 1 mm/m • Surface-friendly material transport, lifetime positioning accuracy, no lubrication required, high program slider speed, maintenance-free, full stability of the steel table maintained, easy, cost-effective replacement of phenolic resin plates, minimal wear of the cylinders, uniform pressure application, minimal cutting = scratch cut, significant cycle time savings, top cutting quality, minimal setup times, reduction of cycle time, pressure strength electrically adjustable • Cutting length: 4300 mm • Cutting width (program slider travel): 4250 mm • Roller track (element 10-track): 1 piece • Roller track (element 2-track): 5 pieces • Clamping collets: 7 pieces (first 3 pieces two-fingered, all others one-fingered) Extra Information Machine still under power

Condition: new, Year of construction: 2025, The Senfeng H1 is Senfeng's best-selling model! Dedpfx Ajvty N Tsc Nocc This is our entry-level fiber laser with interchangeable table, suitable for a power of 1 to 6 kilowatts, this can process up to 25 mm of steel Ideal for the entrepreneur with a medium to large production requirement. Besten Machines has been a dealer for metalworking machines for more than 25 years. We already have more than 50 Senfeng lasers operational in the Benelux and support and install them with our own Dutch employees. In addition, we have a large stock of spare parts to be able to offer a high level of service. - Laser Power: 6,000 W - Laser Wave length: 1020 nm - 1080 nm - X-axis range: 3000 mm - Y-axis range: 1500 mm - Max. Acceleration plate cutting: 1.2 G - Maximum simultaneous axes speed: 130 m/min - Positioning accuracy: ± 0.03 mm/m - Repeat accuracy: ± 0.02 mm/m - Operating voltage: 400V / 50Hz ± 5% - Cutting gases: Oxygen, Nitrogen - Cutting table: 3000×1500 mm - Machine weight: ± 6,000Kg - Equipped with shuttle table – Max. weight of plate per changing table: 700 Kg ===== In addition, the machine is equipped with the following options: - Control: Cypcut - Pull-out drawers for collecting small parts - Aviation aluminum beam - 6,000 watt Max Photonics EU Laser source - Cutting head: Precitec Thunder - Closed top and full machine housing - Proportional pressure control for Oxygen (low pressure), Nitrogen (high pressure) - Water cooler - Power stabilizer - Automatic lubrication unit - Matching extraction - Installation by our own technicians (Additional price based on location)

Condition: new, Year of construction: 2025, The Senfeng SF3015H4 is a machine for heavier production requirements. With an extra heavy frame, this machine is suitable for higher production requirements. This frame is also prepared for possible automation. Besten Machines has been a dealer for metalworking machines for more than 25 years. We already have more than 50 Senfeng lasers operational in the Benelux and support and install them with our own Dutch employees. Dedpfx Aevtzbqec Nscc In addition, we have a large stock of spare parts to be able to offer a high level of service. - Laser Power: 12,000 W - Laser Wave length: 1020 nm - 1080 nm - Range X-axis: 3000 mm - Range Y-axis: 1500 mm - Max. Acceleration plate cutting: 2.8 G - Maximum simultaneous axes speed: 200 m/min - Positioning accuracy: ± 0.03 mm/m - Repeat accuracy: ± 0.02 mm/m - Operating voltage: 400V / 50Hz ± 5% - Cutting gases: Oxygen, Nitrogen - Cutting table: 3000×1500 mm - Machine weight: ± 9,000Kg - Equipped with shuttle table – Max. weight of plate per changing table: 3,000 Kg ===== In addition, the machine is equipped with the following options: - Control: Hypcut - Pull-out drawers for collecting small parts - Aviation aluminum beam - 12,000 watt Max Photonics EU Laser source - Cutting head: Boci BLT441 - Closed top and full machine housing - Proportional pressure control for Oxygen (low pressure), Nitrogen (high pressure) - Water cooler - Power stabilizer - Automatic lubrication unit - Matching extraction - Installation by our own technicians (Additional price based on location)

Condition: new, Year of construction: 2025, laser power: 3,000 W, The 1530G is the ideal middle ground. This compact model saves a lot of space in your workshop due to the absence of a change table. At the same time, large format plates can be processed on this machine. Ideal for the entrepreneur who has a low to medium production requirement with a small floor space. Besten Machines has been a dealer for metalworking machines for more than 25 years. We already have more than 50 Senfeng lasers operational in the Benelux and support and install them with our own Dutch employees. In addition, we have a large stock of spare parts to be able to offer a high level of service. - Laser Power: 3,000 W - Laser Wave length: 1020 nm – 1080 nm - X-axis range: 3000 mm - Y-axis range: 1500 mm - Max. Acceleration plate cutting: 0.8 G - Maximum simultaneous axes speed: 80 m/min - Positioning accuracy: ± 0.03 mm/m Dedjvty E Uepfx Ac Necc - Repeat accuracy: ± 0.02 mm/m - Operating voltage: 400V / 50Hz ± 5% - Cutting gases: Oxygen, Nitrogen - Cutting table: 3000×1500 mm - Machine weight: ± 4,000Kg - Equipped with shuttle table – Max. weight of plate per changing table: 700 Kg ===== In addition, the machine is equipped with the following options: - Control: Cypcut - Pull-out drawers for collecting small parts - Aviation aluminum beam - 3,000 watt Max Photonics EU Laser source - Cutting head: Precitec Thunder - Closed top and full machine housing - Proportional pressure control for Oxygen (low pressure), Nitrogen (high pressure) - Water cooler - Power stabilizer - Automatic lubrication unit - Matching extraction - Installation by our own technicians (Additional price based on location)

Condition: new, Year of construction: 2025, machine/vehicle number: MH-FJ-1A, The VOGEL MH-FJ-1A carton sealing machine has a side drive belt system and an additional drive belt in the upper section of the machine. The advantage lies in the stability - high cartons cannot tip to the side. Carton formats: Length 150 - ∞ mm Width: 120 - 480 mm Height: 120 - 480 mm Technical data: Length 1,090 mm Width 1,050 mm Weight 200 kg Operating voltage 220 V CE marking Accessories: Dsdpsyaaqzefx Ac Nscc For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Condition: new, Year of construction: 2025, machine/vehicle number: MH-FJ-1A, It features a side drive belt system as well as an additional drive belt at the top of the machine. The advantage lies in stability – this prevents tall cartons from tipping over sideways. Carton formats: Length 150 – ∞ mm Width 120 – 480 mm Height: 120 – 480 mm Technical specifications: Length 1,090 mm Width 1,050 mm Weight 200 kg Operating voltage 220 V CE marking Dsdpfx Aeyaahmsc Nscc Accessories: For our VOGEL carton sealer range, we offer castors, infeed and outfeed tables, as well as roller conveyors.

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: 13939, total width: 1,520 mm, total length: 3,550 mm, total height: 2,000 mm, type of input current: three-phase, temperature: 120 °C, input frequency: 50 Hz, input voltage: 380 V, operating pressure: 400 bar, We are offering this used OTT Stabil-3013 veneer press, year of manufacture 1984. Model: Stabil-3013 Machine number: 13939 Dodpfx Aceyc Hyzo Nocc Rated voltage: 380 V Current type: AC • Pressing area: 3,000 × 1,350 mm • 6 cylinders • Interchangeable aluminium plates • Protective film Frequency: 50 Hz Year of manufacture: 1984 If you have any questions or need more information, please feel free to send us a message or call us.

Condition: used, mileage: 94,000 km, power: 290 kW (394.29 HP), first registration: 08/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,800 mm, loading space length: 7,450 mm, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, * Driving school equipment with dual control pedals, additional tachograph, etc. * 5 seats * BigSpace cab * Attention Assist * Lane Keeping Assist * Active Brake Assist * Full air suspension * Lift axle * Differential lock * 7.45 m BDF chassis frame * Trailer coupling * Sun visor * Seat heating * Air conditioning * Cruise control * Automatic transmission * Euro 6 ---- Special equipment: Front axle load 8.0 t, trailer socket 15-pin + 7+7 pin, exhaust outlet down right, high-pressure air unit, electrical pre-installation in cab 24V / 100A, cab with air suspension, vehicle without lower bunk, fuel tank: 630 L aluminium, integrated air intake, programmable special module, spare wheel, cab seats: armrest passenger seat, cab seats: standard passenger suspension seat, cab seats: folding passenger seat backrest, cab seats: comfort driver suspension seat, external sun visor, electric sunblind, 2-piece, steel rims 9.00x22.5, left hand side toolbox under cab, 12V socket in passenger footwell, 24V / 25A socket in passenger footwell Additional equipment: Dsdpfx Asycz Exjc Necc EURO 6 emission standard, axle configuration: 6x2, Actros 4, trailer brake 2-line system, left side connections, trailer socket 24V / 15-pin, audio system: radio with USB connection, external mirrors electrically adjustable and heated, rear axle differential lock, steel air tanks, driver assistance system: Attention Assist (fatigue detection sensor), driver assistance system: Brake Assist (Active Brake Assist), driver assistance system: Lane Keeping Assist, cab: L BigSpace, suspension: air/air (full air suspension), electric windows, tinted windshield, generator 100A, gearbox 12-speed - type: G 211-12, AdBlue tank: 60 L, rear axle crown wheel 440, info display 10.4 cm with auxiliary display, body/chassis: chassis, central locking system, communication interface, radiator shutter, regulated steering pump, trailing axle lift device, 2-stage air compressor, engine 10.7 L – 290 kW R6 diesel (OM 470), engine brake, engine compartment encapsulation, trailing axle with single tires, ramp mirror, residual heat utilization, disc brakes front and rear axle, seat cover/upholstery: fabric, cab seats: folding driver's seat backrest, voltage converter 24V / 12V 10A, front splash guard, front axle stabilizer, additional stabilizer, rear/trailing axle, external left stowage flap, cab socket 24V, tachograph / EC control unit, cab door extension, aerodynamically shaped underbody panelling, front underrun protection, CB radio preparation, toll recording preparation, cranked front axle, regulated water pump, permissible gross weight 25.00 t, auxiliary heating (water)

Condition: used, mileage: 94,000 km, power: 290 kW (394.29 HP), first registration: 08/2017, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,800 mm, loading space length: 7,450 mm, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, * Driving school equipment with dual pedal controls, additional speedometer, etc. * 5 seats * BigSpace cab * Attention Assist * Lane Keeping Assist * Active Brake Assist Djdpjycz Elefx Ac Nscc * Full air suspension * Lift axle * Differential lock * 7.45 m BDF chassis * Trailer coupling * Sun visor * Heated seats * Air conditioning * Cruise control * Automatic transmission * Euro 6 ---- Special equipment: Front axle load 8.0 t, trailer socket 15-pin and 7+7-pin, exhaust downward right, high-pressure air unit, electrical pre-installation in cab 24V / 100 A, cab with air suspension, vehicle without lower bunk, fuel tank: 630 l aluminum, integrated air intake, programmable special module, spare wheel, seats in cab: armrest for co-driver seat, seats in cab: co-driver standard suspension seat, seats in cab: co-driver seat backrest foldable, seats in cab: driver comfort suspension seat, exterior sun visor, electric sunblind, 2-piece, steel rims 9.00x22.5, storage box left under cab, 12V socket in co-driver footwell, 24V / 25A socket in co-driver footwell. Further equipment: Emission standard EURO 6, axle configuration: 6x2, Actros 4, trailer brake 2-line, left-side connections, trailer socket 24V / 15-pin, audio system: radio with USB port, electrically adjustable and heated exterior mirrors, rear axle differential lock, steel air reservoirs, driver assistance system: Attention Assist (drowsiness detection sensor), driver assistance system: Brake Assist (Active Brake Assist), driver assistance system: Lane Keeping Assist, cab: L BigSpace, suspension: air / air (full air), electric window lifters, tinted windscreen, generator 100 A, 12-speed transmission - type: G 211-12, AdBlue tank: 60 l, rear axle crown wheel 440, info display 10.4 cm with additional display, body/chassis: chassis, comfort locking system, communication interface, radiator blind, regulated power steering pump, trailing axle lift device, 2-stage air compressor, engine 10.7 l - 290 kW inline 6-cylinder diesel (OM 470), engine brake, engine compartment encapsulation, single-tire trailing axle, ramp mirror, residual heat utilization, disc brakes front and rear axles, seat upholstery: fabric, seats in cab: driver seat backrest foldable, voltage converter 24V / 12V 10A, front spray protection, front axle stabilizer, additional stabilizer rear axle / trailing axle, external storage flap left, cab 24V socket, tachograph / EC control device, door extension for cab, aerodynamically shaped underride protection front, preparation for CB radio, preparation for toll system, cranked front axle, regulated water pump, permitted gross weight 25.00 t, auxiliary heater (water)

Condition: new, mileage: 19 km, power: 150 kW (203.94 HP), fuel type: electric, gearing type: automatic, overall weight: 3,500 kg, emission class: euro6, color: white, driver cabin: other, number of seats: 3, Year of construction: 2024, total length: 53,640 mm, fuel: electricity, Equipment: ABS, air conditioning, cruise control, onboard computer, Vehicle number: 583701641845X. Warranty & quality seal: Warranty. Assistance systems: Adaptive cruise control, blind spot assist, 360-degree camera, traffic sign recognition, rear parking aid, front camera, cross-traffic alert, reversing camera, forward collision warning, autonomous emergency braking, light sensor, rain sensor, surround-view camera, parking package with 360-degree camera. Lights: LED headlights, LED daytime running lights, fog light/function, indicators integrated into the side mirrors, LED (partial) indicators. Media & infotainment: Radio, MP3-capable audio system, DAB tuner, iPod®/iPhone®/Android interface, USB interface/connection, Bluetooth interface, hands-free system, telephone preparation with Bluetooth, Apple Car Play/preparation, integrated music streaming. Safety & technology: Electronic Stability Program (ESP), passenger airbag, driver airbag, front side airbags, immobilizer. Comfort & Climate: Heated windshield, keyless entry, telematics/emergency call system (prepared), on-board computer, electric parking brake, electric step/running boards, electric windows, air conditioning, central locking with remote control, heated seats, 12V socket, rear wing doors, left-hand sliding door, power steering. Tires & Rims: Tire pressure monitoring. Interior & Design: Steering wheel adjustment. Environment & Charging: EURO 6d, high-voltage battery, charging cable, environmental sticker 4. Transmission: Automatic. Additional information: Accident-free. 150 kW electric motor, rubber cargo floor mat. *Transfer costs are charged separately - EUR 1,290 * -- plus VAT. ----Discover the Rosier online shop - your expert for high-quality car accessories and exclusive lifestyle items at attractive prices! From stylish rims to innovative vehicle technology - we offer everything that makes your car unique. Benefit from unbeatable value and fast delivery. Secure your favorites now and order immediately! Visit us online and make your vehicle a standout on the road! Dcjdpfextkctjx Ac Njc ---Charge your electric vehicle conveniently at home! In the Rosier online shop, you'll find high-quality wallboxes from Mercedes-Benz, Audi, and Volkswagen. These wallboxes enable fast and safe charging directly at home, so you're always ready to go. They offer state-of-the-art technology and are perfectly tailored to your vehicle. Order your wallbox online now and enjoy the flexibility of conveniently charging your electric vehicle at home at any time! Subject to prior sale and errors. The vehicle description serves solely as a general identification of the vehicle and does not constitute a legally binding warranty. Only the agreements in the purchase contract and the order confirmation are binding. Please note that certain optional equipment may incur additional costs. Detailed information on the scope of equipment is available from our sales staff.

Condition: new, mileage: 19 km, power: 150 kW (203.94 HP), fuel type: electric, overall weight: 3,500 kg, fuel: electricity, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 53,640 mm, Year of construction: 2024, Equipment: ABS, air conditioning, cruise control, onboard computer, Vehicle number: 583701641845. Warranty & quality seal: Warranty. Assistance systems: Adaptive cruise control, blind spot assist, 360-degree camera, traffic sign recognition, rear parking aid, front camera, cross-traffic alert, reversing camera, forward collision warning, autonomous emergency braking, light sensor, rain sensor, surround-view camera, parking package with 360-degree camera. Lights: LED headlights, LED daytime running lights, fog light/function, indicators integrated into the side mirrors, LED (partial) indicators. Media & infotainment: Radio, MP3-capable audio system, DAB tuner, iPod®/iPhone®/Android interface, USB interface/connection, Bluetooth interface, hands-free system, telephone preparation with Bluetooth, Apple CarPlay/preparation, integrated music streaming. Safety & technology: Electronic Stability Program (ESP), passenger airbag, driver airbag, front side airbags, immobilizer. Comfort & Climate: Heated windshield, keyless entry, telematics/emergency call system (prepared), on-board computer, electric parking brake, electric step/running boards, electric windows, air conditioning, central locking with remote control, heated seats, 12V socket, rear wing doors, left-hand sliding door, power steering. Tires & Rims: Tire pressure monitoring. Interior & Design: Steering wheel adjustment. Environment & Charging: EURO 6d, high-voltage battery, charging cable, environmental sticker 4. Transmission: Automatic. Additional information: Accident-free. 150 kW electric motor, rubber cargo floor mat. *Transfer costs are charged separately - EUR 1,290 * -- plus VAT. ----Discover the Rosier online shop - your expert for high-quality car accessories and exclusive lifestyle items at attractive prices! From stylish rims to innovative vehicle technology - we offer everything that makes your car unique. Benefit from unbeatable value and fast delivery. Secure your favorites now and order immediately! Visit us online and make your vehicle a standout on the road! Dcsdpfxsxtl Evj Ac Nsc ---Charge your electric vehicle conveniently at home! In the Rosier online shop, you'll find high-quality wallboxes from Mercedes-Benz, Audi, and Volkswagen. These wallboxes enable fast and safe charging directly at home, so you're always ready to go. They offer state-of-the-art technology and are perfectly tailored to your vehicle. Order your wallbox online now and enjoy the flexibility of conveniently charging your electric vehicle at home at any time! Subject to prior sale and errors. The vehicle description serves solely as a general identification of the vehicle and does not constitute a legally binding warranty. Only the agreements in the purchase contract and the order confirmation are binding. Please note that certain optional equipment may incur additional costs. Detailed information on the scope of equipment is available from our sales staff.

Condition: new, Year of construction: 2026, CORMAK SL2000 Laser Welding Machine is an advanced industrial FIBER system providing comprehensive welding, cutting and laser cleaning functions in one unit. With a 2000 W laser source and a modern design, this machine is ideal for facilities where welding speed, joint quality and reliability are key factors. As part of a special offer, the machine comes with a complete set of U-groove rollers, a Teflon wire feeding tube and a cleaning kit (lens and nozzle) Main Advantages High laser power – 2000 W – enables deep penetration and welding of thicker materials without multiple passes. Welding speed up to 120 mm/s – significantly reduces production time compared to conventional methods. Concentrated laser beam – minimal heat-affected zone ensuring clean, durable weld seams. Thin material capability – allows welding of stainless steel from 0.5 mm thickness. Option to weld with or without wire – flexibility to match process requirements. Laser cleaning and cutting modes – extend the machine’s versatility and daily usability. Automatic wire feeder – fully synchronised with the control software for process stability. Design and Technology CORMAK SL2000 is equipped with a 1080 nm fiber laser source and an advanced head with adjustable spot size (0–5 mm), enabling welds even in hard-to-reach areas. The water-cooling system and 230 V operating voltage ensure safe and stable performance across various production environments. Interchangeable nozzles and ergonomic design make servicing and daily operation simple and efficient. Precision and Efficiency The penetration depth for stainless steel at 1 m/min reaches 4.57 mm, which is an excellent result for a compact industrial unit. Adjustable welding parameters allow full control over seam quality — for both thin elements and thicker construction components. Stable beam parameters guarantee repeatability and a clean aesthetic finish. Applications Metalworking plants and industrial workshops Production of railings, light structures and steel frames Automotive, household appliance and electronics industries Laser cutting and cleaning of metal components Standard Equipment Laser welder with integrated cooling system Welding gun with adjustable focal length Fiber laser source Automatic wire feeder Ø 0.8–1.6 mm Complete cable set Starter kit of nozzles and protective lenses Dsdpfx Acjychl Sj Njcc Technical Data Maximum power 2000 W Laser wavelength 1080 nm Penetration depth (stainless steel 1 m/min) 4.57 mm Penetration depth (carbon steel 1 m/min) 3.59 mm Penetration depth (aluminium 1 m/min) 4.0 mm Penetration depth (brass 1 m/min) 4.0 mm Welding speed 0–120 mm/s Automatic wire feeder Ø 0.8–1.6 mm Maximum power consumption ≤6.0 kW Cooling system Water-cooled Operating voltage 230 V Shielding gas consumption approx. 10–12 L/mm Ø wire Dimensions 600 × 1100 × 1100 mm Weight approx. 185 kg

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 1,200 kg, lifting height: 3,600 mm, fuel type: electric, mast type: telescopic, construction height: 2,280 mm, fork length: 1,150 mm, empty load weight: 650 kg, total length: 1,710 mm, drive type: Elektro, construction width: 800 mm, Pedestrian pallet stacker Load center: 600 mm Fork width: 180 mm Fork thickness: 60 mm Mast type: telescopic Transmission: electromechanical Condition: new machine Technical condition: new Front tires type: Vulkollan Dcodpfx Asx Tkkaec Nec Rear tires type: Vulkollan Battery voltage: 24V Battery capacity: 65Ah Battery manufacturer: Noblelift Battery year: 2026 Description: 4-wheel concept for stability • Durable metal hood, centrally positioned drawbar • Multi-function display with discharge and error code indicator as well as operating hours counter • Built-in charger offers greater flexibility • Integrated lift cut-off when the battery is discharged extends battery life • 24V/65Ah lithium battery pack • Pin-code lock • Ergonomic and robust tiller arm Pulse control, CE certificate,

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 1,200 kg, lifting height: 3,600 mm, fuel type: electric, mast type: telescopic, construction height: 2,280 mm, fork length: 1,150 mm, empty load weight: 650 kg, total length: 1,710 mm, drive type: Elektro, construction width: 800 mm, Pedestrian stacker Load center: 600 mm Fork width: 180 mm Fork thickness: 60 mm Dcjdpfx Aox Tki Ajc Nec Mast type: Telescopic Transmission: Electromechanical Condition: New device Technical condition: New Front tire type: Vulkollan Rear tire type: Vulkollan Battery voltage: 24V Battery capacity: 65Ah Battery manufacturer: Noblelift Battery year of manufacture: 2026 Description: 4-wheel concept for enhanced stability • Robust metal cover, centrally positioned tiller • Multi-function display with discharge and error code indication as well as hour meter • The integrated charger provides greater flexibility • The built-in lift cut-off when the battery is discharged extends battery life • 24V/65Ah lithium battery pack • PIN code lock • Ergonomic and robust tiller Impulse control, CE certificate,

Condition: new, functionality: fully functional, Year of construction: 2026, load capacity: 1,200 kg, lifting height: 3,600 mm, fuel type: electric, mast type: telescopic, construction height: 2,280 mm, fork length: 1,150 mm, empty load weight: 650 kg, total length: 1,710 mm, drive type: Elektro, construction width: 800 mm, Pedestrian pallet stacker Load center: 600 mm Fork width: 180 mm Dodpfx Acox Tkivj Njcc Fork thickness: 60 mm Mast type: Telescopic Drive: Electromechanical Condition: New machine Technical condition: New Front tire type: Vulkollan Rear tire type: Vulkollan Battery voltage: 24V Battery capacity: 65Ah Battery manufacturer: Noblelift Battery year of manufacture: 2026 Description: 4-wheel concept for stability • Robust metal cover, centrally positioned tiller • Multi-function display with discharge and error code indication as well as operating hours counter • Built-in charger for greater flexibility • The integrated lift lockout on discharged battery extends battery life • 24V/65Ah lithium battery pack • Pin code lock • Ergonomic and robust tiller Pulse control, CE certificate,

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK SG460S 400V Metal Drum Grinder – Advanced Through-Feed Grinding Machine The CORMAK SG460S 400V metal drum grinder is an advanced through-feed machine designed for precise grinding of metal components. With a grinding drum and a working width of 460 mm, this model is ideal for serial production and facilities that require high-quality surface finishing. It is especially effective for processing small parts after welding or laser cutting. Key Advantages of the Machine 120 mm grinding drum ensures even grinding without risk of burning or scratching Conveyor belt provides smooth transport of the workpiece and stable guidance under the grinding unit Adjustable feed speed from 0 to 4.0 m/min allows adapting the working pace to the material type Dust extraction system with a Ø100 mm outlet ensures efficient dust removal, improving working conditions and component longevity Robust industrial construction (148 kg) guarantees machine stability even during intensive use Design and Technology The SG460S model is designed for stability, precision, and durability. The main frame is made of steel, providing resistance to vibration and deformation. The main 3.0 kW motor drives the grinding drum at 2800 rpm, enabling effective removal of excess material and burrs even in hard steel grades. The 60 W feed motor works with a speed controller, allowing the operator to precisely control the grinding process. The large conveyor belt width of 465 mm enables processing wide elements in a single pass, minimizing operating time. Precision and Work Efficiency The machine provides precise control over the thickness of the processed workpiece in the range of 5 to 80 mm. The grinding belt speed of 14 m/s ensures high surface quality without burning effects. The drum diameter and working length (465 mm) translate into even contact pressure and a uniform final result. Standard Equipment 120 mm grinding drum Conveyor belt width 465 mm Main motor 3.0 kW Feed motor 60 W Dust outlet Ø100 mm Worktable height adjustment Optional Equipment Metal dust and chip extraction system Grinding belts of various grit sizes Automatic material feeding system Technical Specifications Dcsdsycfzkopfx Ac Njc Main motor power: 3.0 kW Voltage: 400 V Grinding drum speed: 2800 rpm Grinding drum belt size: 2760 × 75 mm Conveyor belt size: 1120 × 450 mm Worktable size: 460 × 465 mm Dust outlet diameter: 100 mm Conveyor feed speed (variable): 0–4 m/min Max. workpiece height: 80 mm Min. workpiece height: 5 mm Max. workpiece width: 460 mm Grinding drum dimensions (Ø × length): 120 × 465 mm Feed motor power: 60 W Machine dimensions: 880 × 720 × 1230 mm Net weight: 148 kg

Condition: like new (used), functionality: fully functional, total height: 2,900 mm, table length: 10,000 mm, total width: 3,660 mm, total length: 10,200 mm, table height: 900 mm, table width: 2,545 mm, pressing force: 100 t, overall weight: 26,000 kg, operating speed: 9 mm/s, reverse speed: 14 mm/s, pressure: 320 bar, power: 4 kW (5.44 HP), MOBILE HYDRAULIC GANTRY PRESS WITH MOVABLE HEAD AND 10-METER LONG TABLE FOR STRAIGHTENING WELDED STRUCTURES AND CUT PLATES TECHNICAL DATA Force T 100 Motor power kW 4 Motor ventilation switch power kW 0.37 Bridge travel motor power kW 0.75 Working speed mm/s 3 Approach speed mm/s 9.2 Return speed mm/s 14.4 Max. pressure Bar 320 Working area mm 10,000 x 2,545 Ram stroke max. mm 450 Maximum open height mm 600 Lateral travel mm 2,120 Gantry travel mm 9,140 Working height mm 900 Dsdpfx Acswkvmno Necc Total length mm 10,200 Total width mm 3,660 Height mm 2,900 Weight kg 26,000 The hydraulic press TL-100/10000E belongs to the T/NC series and has been specially developed for straightening welded structures and cut plates. As with all hydraulic presses in this series, its design facilitates the loading and unloading of large workpieces. Thanks to the lateral movement of the cylinder and the longitudinal travel of the bridge, access to various pressing points is possible without having to reposition the workpiece. The machine complies with all essential safety and health requirements in accordance with CE regulations. STRUCTURE AND TABLE • Electrically welded structure made exclusively from S355JR steel. • Stabilized and machined after welding to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • Longitudinal bridge travel achieved by frequency inverter and toothed belt. • Motorized lateral head movement. CYLINDER AND HYDRAULIC UNIT • Double-acting cylinder with lapped sleeve, chrome-plated piston, and maintenance-free wear-resistant guides. • Fitted with a removable and exchangeable pad to prevent piston wear and machined at the end to match the tool. • Includes standard anti-rotation device for the cylinder and a calibrated front end with limit switches for stroke adjustment. • Motorized hydraulic unit with two speeds and automatic cut-off for rapid speed. • Cylinder decompression valve. • Pressure regulator. • Glycerin pressure gauge with tonnage indicator. ELECTRICAL INSTALLATION AND SAFETY • The control panel includes a selector switch for manual or semi-automatic operation. • Selector switch for choosing between rapid approach speed and slow working speed. • Operation via pendant control with emergency stop and low-voltage control. • Includes button to confirm a cycle.

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, throat depth: 350 mm, total height: 3,200 mm, table width: 1,100 mm, table length: 700 mm, stroke adjustment: 150 mm, total width: 1,860 mm, total length: 3,200 mm, overall weight: 8,000 kg, pressing force: 160 t, distance table to ram: 500 mm, year of last overhaul: 2025, Equipment: safety light barrier, GARNET C-FRAME ECCENTRIC PRESS MODEL: PE4-160 – SHOWROOM MACHINE DESCRIPTION: Frame constructed from welded and stabilized steel. The slide is made of welded steel, equipped with four guides and a base designed for oil collection. Transmission between the drive shaft and the eccentric shaft is via a gear reducer with ground gears; this system allows operation at high tonnage with relatively low nominal speeds. Electropneumatic clutch-brake, equipped with dual-channel safety solenoid valve and cross-flow. The pneumatic system includes a compensation tank, filter-regulator-lubricator unit with control pressure switch, and safety valve. Centralized automatic lubrication with a progressive lubrication system. Electric panel with programmable PLC (Omron or Pilz) and electrical components by Siemens or Schneider. Operation by two-hand push button control and low-voltage electric foot pedal. Safety provided by photoelectric barriers and side guards with safety micro-switches for opening. Emergency stops. All components comply with CE regulations. FEATURES: • Welded steel structure with reinforced sections. • Four anti-friction sliding guides. • DIN-650 T-slots for tool clamping. • Dual operation: two-hand and foot pedal. Dodpjw S Huwofx Ac Njcc • Piece counter system. • Programmable PLC. • Hydraulic overload release system for slide unlocking. • Two-cam rotary limiter. MODEL PE4 – 160 Nominal capacity tn 160 Strokes per minute 45 Nominal stroke height 6 mm Stroke adjustment 20-150 mm Max. closed die height 350 mm Table-slide opening 500 mm Slide adjustment 70 mm Table dimensions 700 x 1100 mm Slide dimensions 370 x 620 mm Table central bore diameter 280 mm Slide bore diameter 55 mm Throat depth 350 mm Main motor 11 kW Number of connecting rods 1 Number of guides 4 Safety light curtains yes Dual-body safety valve yes Pneumatic clutch yes Anti-vibration silent blocks yes Overall width (W1) 1800 mm Overall depth (D1) 1860 mm Height (H1) 3200 mm Approximate weight 8000 kg

Condition: like new (used), functionality: fully functional, machine/vehicle number: FDL-150-100E/NC, total length: 1,200 mm, pressing force: 150 t, table width: 800 mm, working height: 600 mm, clearance between the columns: 1,250 mm, Equipment: documentation/manual, safety light barrier, DOUBLE-COLUMN HYDRAULIC PRESS WITH TWO SIDE CYLINDERS FOR PRE-PRESSING AND PRESSING OF ROTORS AND STATORS, AND A CENTRAL CYLINDER FOR ROTOR SHAFT EXTRACTION, AS WELL AS FOR SHAFT EXTRACTION IN CASE OF REPAIR It features an extendable table for stacking and handling rtors and stators. It meets and satisfies all essential safety and health requirements according to CE regulations. STRUCTURE AND TABLES • Consists of a rigid fixed bench welded structure made exclusively from S355JR steel. • Stabilized and machined at the end of the welding process to ensure perfect parallelism and precision. • Calculated and designed using finite element software. • Mechanically movable grooved table measuring 1200 x 800 mm with a stroke of 1,200 mm, equipped with a worm gear reducer and a 0.5 HP electric motor with brake. • Central drill on the table with a diameter of 250 mm and a maximum depth of 550 mm. • Useful lifting capacity of the table for moving 4 tons. • Movement speed of 30 mm/sec. • Front interior width of 1250 mm (space between columns). • Working height of 600 mm. MAIN CYLINDERS: 150 TN • Two 75-ton hydraulic cylinders (150 tons total), with a stroke of 1200 mm connected by a plate with a central hole of 250 mm in diameter. Dcsdpfx Acowpg Aws Nec • Maximum useful height of the cylinder plate: 1,440 mm. • Minimum useful height of the cylinder plate: 200 mm. ABSTRACTION CYLINDER • One 100-ton central cylinder with a stroke of 1200 mm. • Designed to accommodate an abstraction clamp, end of the rod threaded to M 35.150 x 40 mm length. • Maximum useful height of the abstraction cylinder: 1600 mm from the root of the rod thread. • Minimum useful height of the abstraction cylinder: 400 mm from the root of the rod thread. HYDRAULIC GROUP • Two-speed hydraulic group with 5.5 HP power “Siemens Motor”, with automatic disconnection of high speed and independent speeds. Maximum pressure: 250 bar. • Pressure regulation system using proportional valves. • Air-oil cooler. • Temperature sensor. • Hydraulic group located on the right side. ELECTRICAL INSTALLATION AND SAFETY • Equipped with a SIEMENS mod. SIMATIC S7 1200 safety PLC and a 12” HMI touchscreen mod. MTP with 99 memory slots allowing adjustment of pre-pressing power, pressing, calendering, and stroke of the pressing and extraction cylinders, as well as the holding times during processes. • Electrical and hydraulic maneuvers are redundant and self-controlled. They include an additional safety block and self-control devices for operation and safety. Includes verification and certification of correct operation and safety distance for photoelectric cells. • The electrical panel includes a selector for choosing the type of work in manual, semi-automatic, or automatic position and a selector for high-speed or low-speed operation. • Operation is performed via a two-hand low-voltage electrical pushbutton. • All installed electrical materials are Siemens, including relays, contactors, main motor, etc. • Ready for Industry 4.0. • To ensure safety, it includes category IV photoelectric barriers located in the front work area, two fixed side guards, and a practicable rear guard with a magnetic disconnection detector.