Used Soil Stabilization for sale (6,329)

Condition: used, Year of construction: 2012, Serial number: 120705xxxx Please contact ATS Norway for more information Casdox Dhakopfx Ab Tsa Please provide reference number upon request: 21979 Specifications: - 2012 model - Hours: Owner is uncertain - Double key - Deutz Engine - Water tank - Undercarriage (see pictures) - Washer - Comes with drilling equipment, 3 hammers - 4-10 inch holes - Services have been done myself - Ready for delivery Own weight: Model: 2012 Gemsa Brønnborerigg

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany, Uelzen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Caedpfxjx Dd Ece Ab Toa Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, mileage: 217,482 km, axle configuration: 4x4, Year of construction: 2006, Equipment: all wheel drive, Empty weight: 16.000 kg Casdpfx Abex A A Tps Tea Carrying capacity: 7.800 kg GVW: 23.800 kg Auction item. The truck with drilling equipment is in working condition. Truck MAN 17.222. The maximum drilling diameter is 315 mm. Separate engine for drilling equipment. New suspension, tires. All books and specifications are available.

Condition: used, functionality: fully functional, Various used exciter motors in stock; all function tested; brands: Schenck, Siebtechnik, Joest Cajdpfx Ajxywqkjb Tsa

Condition: used, Year of construction: 2018, operating hours: 4,800 h, Equipment: all wheel drive, Cat CB 2.5 – Caterpillar CB2.5 Tandem Vibratory Roller This is a compact roller (tandem vibratory roller) from Caterpillar. * Operating weight: approx. 2.5 tons * Drum working width: approx. 1.0 m * Engine: Caterpillar diesel engine * Vibration frequency & centrifugal force Only 4,600 operating hours Cjdpjw Thfgsfx Ab Teaa Year of manufacture: 2018 Technical Data CB2.5 * Weight (ROPS): approx. 2,521 kg (5,546 lb) * Compaction width: 1,000 mm (39.4 in) * Engine power: 36 kW / 48.2 hp, Model C1.7T * Vibration system: * Frequency: 64 Hz * Max. centrifugal force: 6,697 lb (~30 kN) * Dimensions: * Length: 2,520 mm (99.2 in) * Overall width: 1,112 mm (43.8 in) * Drum diameter: 720 mm (28.3 in) * Drum width: 1,000 mm (39.4 in) * Height (ROPS): 2,700 mm (106 in)

Condition: excellent (used), Year of construction: 2015, operating hours: 3,093 h, Make of engine: Deutz 6 cylinder CE mark: yes Technical condition: very good Visual appearance: very good Front tyres / undercarriage remaining: 90 Rear tyres remaining : 90 Delivery terms: EXW Production country: SE Please contact Christiaan Dekker for more information Atlas Copco Boomer WE3 C30 Year: 2015 Hours: 3093 1000 volt CE certified Gross weight: 54.7 ton Diesel power180KW 6 cylinder engine Electric power 28KW/ 320Ampere Hydraulic tilt cabin Prepared for Leica GPS Rotary air drills COP 3038 drills Hydraulic waterbooster Hydraulic Compressor Hydraulic manbasket Cajdjxykvaopfx Ab Tja Tyres 90% good Price Euro. 129.000,-

Condition: used, Year of construction: 2012, Please contact ATS Norway for more information Please provide reference number upon request: 21933 Specifications: Approx. 4000 hours Hose reel Winch Flashing lights Cedpjx Anahsfx Ab Teaa Extra lighting Good undercarriage including tracks and wheels Compressor 24V Remote control Engine: Perkins Diesel, 4-cylinder Hammer: Atlas Copco 670

Condition: used, Year of construction: 2018, operating hours: 664 h, 2018 | Ammann ARR 1575 – Remote-Controlled Trench Roller Ideal for Soil Compaction | Used Tandem Roller | 664 hours 📍Location: France, Noyelles-Godault 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 5500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Cajdjx Alhvspfx Ab Tsa 👷‍♂️ Inspected by an independent expert 35 inspection points 32 approved ✅ 3 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Fully functional roller. The engine runs well. Engine hoods are cracked and broken, requiring attention before the machine can be used. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "38858 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, mileage: 22,660 km, power: 110 kW (149.56 HP), gearing type: mechanical, fuel type: diesel, axle configuration: 6x6, Year of construction: 1980, Empty weight: 10.185 kg GVW: 10.185 kg Technical inspection expiration date: 2026 Auction item. Truck with drilling equipment is in working condition. Working depth up to 180 meters. Drilling diameter 190 millimeters. Identification number marked only on the identification plate. Casdpfx Aboxz Dxqj Toa Engine replaced, Mercedes-Benz, 6-cylinder engine installed.

Condition: good (used), power: 406 kW (552.01 HP), fuel type: diesel, color: yellow, first registration: 01/2017, Year of construction: 2017, operating hours: 7,500 h, Drive: Wheel Number of cylinders: 6 Unladen weight: 29,500 kg Technical condition: Good Visual condition: Good Year of first use: 2017 Manufacturer: CATERPILLAR Model: RM-500B Operating hours: 7,500 Serial number: CATRM500VMB900114 Condition: Used Operating condition: Operable Description: - Enclosed cab - Air conditioning - Rear view camera - Water system - US EPA Tier 3 Final label - Requires Diesel Exhaust Fluid - 96" universal rotor - 20" cutting depth - AutoLube system - 4x4, 23.1-26 tires (good condition) Category Specification: - Application: Soil stabilizer/recycler combination - Operating weight: 62,611 lbs - Maximum working width: 96" - Maximum working depth: 20" - Maximum working speed: 393.7 ft/min - Rotor type: Universal Casdpsxyh H Nefx Ab Tea - Rotor rotation: Up-cut - Depth control: Yes - Ground clearance: 19.9" - Water system: Yes - Sliding operator platform: Yes - Auto lubrication: Yes - Camera: Yes Chassis: - Remaining tire tread: 100% Exterior: - ROPS: Enclosed - Auxiliary lighting: Yes - Mirrors: Yes Interior: - Heater: Yes - Air conditioning: Yes (condition: excellent) Powertrain: - Maximum travel speed: 6.2 mph - Drive type: 4WD - Steering modes: Yes Engine: - Power: 546 hp - Engine manufacturer: CATERPILLAR - Engine tier: US Tier 3 Shipping dimensions: - Length: 405" - Width: 115" - Height: 141" - Shipping weight: 62,611 lbs

Condition: used, Atlas Copco LG504, the equipment is operational, year of manufacture 2016, weight 534 kg, features: soil compaction indicator. Cjdoxuwcvopfx Ab Tsaa

Condition: used, Year of construction: 2014, Serial number: 2xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21943 Specifications: Year model: 2014 Engine hours: approx. 6000 Power: 105 kW Weight: 11,000 kg Undercarriage (see photos) Remote control Winch Track width: approx. 25 cm Machine width: approx. 220 cm Newly overhauled engine Newly overhauled hammer, used approx. 20 hours after overhaul Stage 4 engine Screen backlight is slightly weak Description:Sandvik Dino DC400RI drilling rig from 2014.Both the engine and the hammer have been overhauled. The engine has run approx. 1000 hours since the overhaul, while the hammer has only been used for a couple of weeks.Some minor leakage/sweating.Can be delivered at short notice.See video. Own weight: 11000 Engine hours: 6000 Model: Dino DC400RI Borerigg. Overhalt motor og hammer SE VIDEO Codpfxox Anaue Ab Tsaa

Condition: used, mileage: 406,265 km, power: 194 kW (263.77 HP), gearing type: mechanical, fuel type: diesel, axle configuration: 4x4, Year of construction: 1992, Equipment: all wheel drive, Empty weight: 10.075 kg Carrying capacity: 7.925 kg GVW: 18.000 kg Technical inspection expiration date: 2026 Codpfsxzyqisx Ab Tsaa Digging depth: 180 m Auction item. Truck with drilling equipment is in working condition. Working depth up to 180 meters. Drilling diameter 190 millimeters.

Condition: used, Year of construction: 1996, Serial number: 8xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21912 Specifications: 1996 model 1848 hours (I'm a little worried) 564 stroke hours 82 kW Weight: 8160 Machine width: 230 cm Cajdoxz N Ahspfx Ab Tea Winch Directional instrument Boart HD125 hammer Chassis Diesel heater Videos Ready for delivery Description: We have a 1996 Nemek 503 TXI drilling rig w/ low hours for its age for sale. Errors and defects may occur as the rig is from 1996. But the owner says it works as it should. It has few hours on the engine and hammer in relation to its age. Ready for delivery Own weight: 8160 Engine hours: 1848 Model: 503 TXI borerigg m/ lite timer i forhold til alder

Condition: used, power: 119 kW (161.79 HP), Year of construction: 2008, operating hours: 14,948 h, Digging depth: 190 m Auction item. Drilling equipment is in working condition. Working depth up to 190 meters. Caedoxzyqcjpfx Ab Toa Drilling diameter 190 millimeters.

Condition: used, Year of construction: 2004, Serial number: EKJ0043xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21885 Specifications: Caodsxy Eyaspfx Ab Toa - 2004 (2012) model - Hours: Approx. 600 - Weight: 6200 kg - Chassis from 2004 - The rest is from 2012 - Drilling equipment is not included - 2 engines can be included as parts - Ready for delivery Description: The rig burned down and then everything was replaced in 2012. The chassis is from 2004, but the rest has been replaced. The job was done by Epiroc. The machine is ready for delivery. Own weight: 6200 Engine hours: 600 Model: 2004 (2012) Welldrill 3050CR Borerigg

Condition: used, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 21854 Specifications: Cjdpfxexypt Rs Ab Tsaa 2019 model About 7135 hours (will give a little) Stroke hours: 3432 hours Compressor time: 5292 hours Chassis (see pictures) CME grinder Water mist Leica GPS Recently serviced Carousel Vacuum cleaner Rod shifter Automatic drilling Protective cage Winch Air conditioning/ac Radio Remote control Light Ready for delivery   Description: We have a 2019 DX800i drilling rig w/ water mist and Leica GPS for sale. All services and maintenance have been carried out continuously and the rig is in good condition according to the owner. The rig has recently undergone new service. Ready for delivery Engine hours: 7135

Condition: used, Year of construction: 2020, Please contact ATS Norway for more information Please provide reference number upon request: 21856 Specifications: 2020 model 5271 hours (I want to know a little) 1669 stroke hours Chassis (see pictures) New belts Recently serviced Carousel Water mist system CME grinder Leica GPS Vacuum cleaner Drill bit holds on the side Protective cage Automatic drilling Light Air conditioning/ac Ready for delivery   Description: We have an Atlas Copco T35 w/ water mist, cme grinder and gps for sale. Codpfx Abexypqpe Toaa Everything works as it should according to the owner and service has just been taken. The rig's belts have also recently been replaced. The rig is well maintained and, according to the owner, is in excellent condition. Ready for delivery Engine hours: 5271

Condition: used, Year of construction: 2021, Please contact ATS Norway for more information Please provide reference number upon request: 21855 Specifications: Codpexypp Esfx Ab Toaa 2021 model 5631 kg Weight: approximately 20,000 kg Belts replaced in 2024 Winch Water mist L5 gps Services taken in progress It will be delivered with new service Rod shifter Vacuum cleaner Rod magazine Air conditioning/ac Light Radio Ready for delivery   Description: We have a 2021 Sandvik DX800 drilling rig w/ water mist and L5 gps for sale. Everything works as it should and all services and maintenance have been taken care of by the owner. A new service will be taken upon sale. Ready for delivery

Condition: used, Year of construction: 2020, Please contact ATS Norway for more information Please provide reference number upon request: 21853 Specifications: 2020 model About 5380 hours (will be a little) Straight grinder Chassis (see pictures) Recently serviced Carousel Rod shifter Vacuum cleaner Winch Protective cage Remote control Pendant on base Light Ready for delivery   Cjdpfx Aexypprob Teaa Description: We have a 2020 Atlas Epiroc T30 drilling rig w/ L5 gps for sale. It has recently been serviced and everything works as it should, according to the owner. Services and maintenance are ongoing. The number of hours will increase slightly as the rig is in daily operation. Ready for delivery Engine hours: 5380

Condition: used, Year of construction: 2020, Please contact ATS Norway for more information Please provide reference number upon request: 21850 Specifications: 2020 model 4908 Hours (I want a little) 1602 Stroke hours (I want a little) Chassis (see pictures) About 14000 kg Winch Remote control Rod shifter Carousel Services performed continuously Vacuum cleaner Light Protective cage Pendant on base Support paws Ready for delivery   Description: We have a 2020 Atlas Epiroc T30 drilling rig for sale. The rig has recently had service and maintenance. Everything works as it should according to the owner. The number of hours will increase slightly as the rig is in weekly operation. Ready for delivery Own weight: 14000 Csdpfx Ajxydkkjb Teaa Engine hours: 4908

Condition: used, Year of construction: 1986, Serial number: 606xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21730 Spesifikasjoner:  1986 modell Caodpfx Ajxu A N Ueb Tea Motortimer: ca 3000 6 sylindret Dutch motor Skiftet motor   HLR 438l hammer  Vernebur  Understell (se bilder)  Maskin bredde: 231 cm  Vinsj  Støvsuger  Lys  Video  Leveringsklar      Beskrivelse: Vi har en 1986 Tamrock DHA400 Borerigg m/ HLR 438L hammer for salg.  Riggen fungere, men feil og mangler kan forekomme og noe påkost må regnes med da den er ifra 1986. Leveringsklar. Own weight: 1 Engine hours: 3000 Model: DHA400 Borerigg m/ HLR 438L hammer

Condition: used, Year of construction: 2017, Serial number: tmg17sedo222/xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21688 Specifications: 2017 model 9203 hours 3114 stroke hours 168 kW 16400 kg Leica GPS 2540 hammer Rod shifter Carousel Magazine Winch Compressor Aluminum feed beam Undercarriage oscillation Services taken by yourself Protective cage Chassis (see pictures) T45 Vacuum cleaner Remote control Light Ready for delivery   Description: We have a 2017 Atlas Copco T35R-01 Drilling rig w/ cop 2540 hammer, grinder and Leica gps for sale. The rig functions as it should and maintenance and service have been taken care of continuously by the owner. The GPS control provides precise control over the drilling pattern and drilling depth, which contributes to optimal volley and a better blasting result. Ready for delivery. Own weight: 16400 Engine hours: 9203 Caedpfsxr Tx Uex Ab Toa Model: T35R-01 Borerigg m/ cop 2540 hammer, sliper og Leica gps

Condition: used, Year of construction: 2017, Serial number: tmg17sed0500/8992 xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21690 Specifications: 2017 model 9836 engine hours 3126 stroke hours 168kW Casdpsxr Txzofx Ab Tea 17200kg Leica GPS 2560 hammer Rod shifter Carousel Magazine Winch Compressor Aluminum feed beam Undercarriage oscillation Services taken by yourself Protective cage Chassis (see pictures) T45 Vacuum cleaner Remote control Light Ready for delivery     Description: We have a 2017 Atlas copco smartroc T40-11 Drilling rig w/ 2560 hammer, CME grinder and Leica gps for sale. Everything works as it should according to the owner. Services and maintenance have been taken continuously. The model is known for its versatility, precision and ability to operate effectively under tough conditions. Ready for delivery. Own weight: 17200 Engine hours: 9836 Model: smartroc T40-11 Borerigg m/ 2560 hammer, CME sliper og Leica gps

Condition: used, Year of construction: 2012, Serial number: AVO 12a1172/8992xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21691 Specifications: 2012 model 13265 engine hours 5138 stroke hours 168kW 16600 kg Leica GPS 2540 hammer Rod shifter Carousel Magazine Winch Casdpjxr Txnefx Ab Toa Compressor Aluminum feed beam Undercarriage oscillation Services taken by yourself Protective cage Chassis (see pictures) T45 Vacuum cleaner Remote control Light Ready for delivery Description: We have a 2012 Atlas Copco smartroc T40-11 drilling rig w/2540 hammer, CME grinder and GPS for sale. All maintenance and services have been taken care of. The chassis is somewhat worn and should be replaced. Errors and shortcomings may be found as the rig is from 2012. But all functions work as they should according to the owner. Ready for delivery Own weight: 16600 Engine hours: 13265 Model: Smartroc T40-11 borerigg m/2540 hammer,CME sliper og gps