Used High Voltage Generator for sale (35,875)

Condition: used, Year of construction: 2017, operating hours: 49,000 h, functionality: fully functional, machine/vehicle number: 170015, Nitrogen generator model number Nitro -Gen 250. This generator is in operation and running 24 hours 5/6 days a week, it is in excellent condition and routinely serviced. It produces nitrogen gas at 99.5 to 99.9% purity with a flow rate of 40/55 M3/hour for packing food to MAP. requirements. Flow rate varies depending on the purity of Nitrogen required. It is estimated it will have a higher flow capacity than that quoted, but in it's present location is sufficient to supply our 4 production lines. There are also 2 buffer/storage tanks included as shown. In addition there is a 11Kw compressor that supplies the generator- if required. With the buffer tanks and compressor[if required] this is a complete working Nitrogen generation system. Operation & installation Manual available. Documents -PDF with rating of this 250 model relative to different purity level settings The machine is for sale only due to expansion of the business resulting in additional new production lines requiring higher capacity equipment. Cedpfxoxbta Do Ab Tshf

Condition: good (used), SPG. Regulator, generator control, generator voltage regulator, for generator, -Manufacturer: Nucleus, Generator DG1-1000 -Technical data: see photo of the nameplate -Number: 10x generator available Chsdpfx Aoxnxdnob Tsf -Price: per piece -Dimensions: 320/320/H95 mm -Weight: 4.2 kg/pc.

Condition: excellent (used), Year of construction: 2005, operating hours: 3,328 h, functionality: fully functional, total height: 1,900 mm, total width: 1,000 mm, total length: 1,000 mm, empty load weight: 900 kg, This machine has rather few operating hours. I can also sell Orma press with this machine. Cjdpfx Aboxfqgij Tehf

Condition: as good as new (ex-display), Year of construction: 2011, power: 630 kW (856.56 HP), overall weight: 3,340 kg, ABB HIGH VOLTAGE INDUCTION MOTORS Motor Rotor Type 3-Phase Chodpfoqctpgox Ab Tsf Motor Power (KW:) 630 KW

Year of construction: 2001, condition: used, SECOND-HAND H.F. GENERATOR ELETTRONICA CAVALLO MOD. GAF 50KW - CE RULES - Double exit Chedpfxjmzbkks Ab Tof - Year 2001

Condition: used, Year of construction: 2011, functionality: fully functional, Quick steam generator set - Jumag consisting of 3 quick steam generators including water softening system and chemical dosing system Chsdewn H Auepfx Ab Tjf 1x Jumag DG 360 Volume: 60L Operating pressure: 13 bar Max. heat output: 245 kW Steam output: 360 kg/h Gas burner: Weishaupt WG30N/1-C-ZM-LN Year: 2011 2x Jumag DG 320 Volume: 49L Operating pressure: 13 bar Max. heat output: 200 kW Steam output: 320 kg/h Gas burner: Weishaupt WG30N/1-C Year: 2002

Condition: excellent (used), Chilworth JCI 164 High-Voltage Adapter General Description The JCI 146 is a voltmeter adapter component designed for integration into broader experimental systems. Combined with our JCI 140, the system enables the measurement of current-carrying conductors with voltages up to ±60 kV DC through direct connection with an accuracy of ±2% (nominal) and minimal loading effects on the device under test. The high input impedance and low capacitance of the JCI 146 are suitable for more accurate DC voltage measurements. Other conventional techniques for directly measuring high voltages (e.g., high-voltage meters, capacitive and resistive divider networks, etc.) often produce inaccurate results due to loading effects caused by the test setup. This device can be used to verify the calibration and accuracy of high-voltage sources by power utilities, calibration test houses, and cable manufacturers, to name a few applications. Features Direct measurement of live conductors up to ± 60 kV DC High-accuracy measurement with minimal loading effects Low input capacitance Very high input impedance, typically 10 13 ohms Can be used in a wider range of test and research systems Optional battery-powered and opto-isolated data acquisition module available for remote high-voltage monitoring. Specification Measurement: Maximum measurement voltage ± 60 kV DC Input impedance: Not less than 4.7x10 13 ohms at ± 50 kV Input capacitance: 32 pF (± 20%) (JCI 146 chamber only) Installation: Fixed installation (permanent ground connection required) Use: Used in Faraday cage environments (not included as standard) Accuracy: Nominal ± 2% Attenuation: 1/10 of the reading displayed on the JCI 140 For use with the JCI 140 static monitor and the JCI 165 data acquisition module Chodpfxeu Ehh Es Ab Tjf Find more items - new and used - in our shop! International shipping costs upon request!

Condition: good (used), High-voltage motor, electric motor, three-phase asynchronous motor with squirrel-cage rotor -Power: 630 kW -Voltage: 10500 V -Speed: 1493 rpm -Shaft: Ø 65 x 140 mm -Design: B3 -Protection class: IP 54 -Documentation: everything available -Quantity: 1 piece available Csdpfevvmn Uex Ab Tohf -Dimensions: 2440/1885/H1500 mm -Weight: 5000 kg

Condition: as good as new (ex-display), High definition HD generator for plasma cutting. New never used from stock. Cjdpfxsg Tcufo Ab Tehf Ready for delivery except sold. Bargain.

Condition: as good as new (ex-display), KT 638-3, adaptronic test technology, high voltage tester Chodpfx Aour R Hcob Tsf Model: 0KT 638-3 Condition: As good as new

Condition: ready for operation (used), Technical characteristics 150 bar hydraulic unit useful dimensions 2600 mm x 1000 mm 6 horizontal single-acting jacks with flat or edge locking (clamping high parts) 2 vertical hydraulic pressers high frequency unit for rapid setting of glued assemblies 3 zone hydraulic control ideal for frames, panels, furniture element frames, stairs, fixtures Cjdpstgnivjfx Ab Tohf Power and Motors Overall dimensions Lenght: 3000 mm Width: 1800 mm Weight: 1500 Kg

Condition: used, SPG. Regulator, generator control, generator voltage regulator, for generator, -Part No.: 49.2.777.0053E -Voltage: 3x 60V Codpfx Aeb Uhtpsb Tshf -Frequency: 50/60Hz -Number: 1x available -Price per piece -Dimensions: 170/160/H60 mm -Weight: 0.5kg

Condition: new, 101353, PU60FC-230V-50Hz, Kist + Escherich, high voltage power supply 60 FC Cedpfx Abetw D Ure Tohf Model: 101353 Type: PU60FC-230V-50Hz Condition: New

Condition: used, High-voltage system, high-current system, high-voltage system, transformer -Manufacturer: Himmel, high-voltage system, high-current system -Type designations: Sky HG 64-25 KTS-01 9942 -High frequency: 0.7MHz Chodpfx Abspy Rx Ns Tsf -Rated power: 25 kW -Individual components/technical data: see nameplate photos -Dimensions: 1605/880/H1840 mm -Weight: 830 kg

Condition: used, Year of construction: 2002, Technical details: rated capacity: 1670 kVA rated capacity: 1500 KW voltage: 400 / 50 V / Hz Number of working hours: 800 h This UPS system is ideal for fault-free operation under the demanding environmental conditions that can occur in industrial applications. Suitable for stabilizing mains systems, for example. The UPS system consists of the Powerbridge (a flywheel mass with attached generator) and a Uniblock (electric motor/generator block). The Uniblock supplies the power for the customer modules without grid faults. The Powerbridge serves as energy storage. In the event of a mains failure, the Powerbridge briefly takes over the power supply (at full load, the power supply is maintained for 39 seconds). Energy storage unit type PB60+ with bridging time 39sec. A diesel engine is connected via an overrunning clutch. This means that as soon as the engine has reached the speed of the Unibklock, it pulls the generator up to the synchronous speed and thus takes over the power supply. At the same time, the Powerbridge is supplied with energy again. * Csdpfxsu Nzwuj Ab Tshf

Condition: excellent (used), functionality: fully functional, load capacity: 750 kg, Equipment: foot remote control, APS welding rotary table DSE 750 kg Speed continuously variable from 0 - 1.7 rpm. Length 1250mm, width 1550mm, height 940mm Height from floor to center of hole min. 500mm, max. 780mm Diameter of clamping disc 600mm Hollow shaft or hole 110mm Csdpjv A Rppjfx Ab Tehf

Condition: good (used), Year of construction: 2005, laser hours: 4,029 h, laser power: 2,000 W, We are offering a TRUMPF TCF1 generator and resonator. These components come from a portal 3D laser. The system was fully functional until it was dismantled 24 months ago. Since then, the components have been stored in a heated area. Chjdov Ic Saopfx Ab Tof

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 213-051, cutting width (max.): 400 mm, wheel diameter: 860 mm, TECHNICAL DETAILS Saw blade type: Horizontal Saw wheel diameter: 860 mm Maximum cutting width: 400 mm MACHINE DETAILS Cjdpfx Aexmgq Tjb Tehf Model: Hhepunkt HP-400 Year of manufacture: 2018 Serial number: 213-051 Motor power: 22 kW (30 HP) EQUIPMENT Conveyor belt (in poor condition)

Condition: excellent (used), Used CHP Plant Manufacturer: Indop Year of manufacture: 2014 Fuel type: natural gas Electrical output: 50 kW Thermal output: 80 kW Csdpfxowthzio Ab Tshf Operating hours: 28,901 h Engine type: MAN GAS ENGINE e0834 e32 (54 kW) Number of cylinders: 4 Available: 3 units Indop 50 kW at €13,400 each 2 units Indop 20 kW at €8,600 each 1 unit Energ-g 50 kW at €13,400 Test run possible.

Condition: like new (used), Year of construction: 2023, Generator power unit emergency power generator, make: Emean, type: DAGFS 50, 50 kW, 50 Hz, 400 Volt, 3-phase, 4-cylinder, water-cooled, IP23, year of manufacture: 2023. Features: 3 x 16 amp sockets (blue) and 1 x 32 amp socket (red), dimensions: 2.30 m x 0.95 m x 1.25 m, weight: approx. 900 kg, new, unused. Rated power: 50 kVA, continuous power max. 40 kVA, standby power: 55 kVA / 44 kW, rated current 33 amp, voltage 400/230 V, 50 Hz, 230 V, 50 Hz. Fuel consumption at 75% load: approx. 11 l/h, fuel consumption on standby: approx. 4 l/h. Drive unit: 4-cylinder inline diesel engine by RICARDO, engine output at 1500 rpm: 45 kW, engine output at 1800 rpm: 55 kW, displacement: 1,500 cc, fuel tank capacity: 99 liters. Simple and compact design with soundproofed metal enclosure, forklift tine pockets for easy and safe handling, 3 x CEE 16 amp sockets (3-pin, 230 V), 1 x CEE socket (5-pin, 400 V), terminal connectors for cable connection to external loads, e.g., site distribution boxes, 2 starter batteries 12 V for 24 V starter, weight: approx. 870 kg. Csdpfx Absv Hamxj Tjhf

Condition: new, An additional aircompressor are required to enable the nitrogen generator to produce nitrogen. Nitrogen purity: 99.999% Input pressure: 8Bar Output pressure: 7Bar Power: 75W(Power is the cost per hour to produce nitrogen ) Chedpfsxfrv Esx Ab Tef 3 în 1 design, no need for extra air compressor and refrigerator or dryer Gas clean

Condition: used, Year of construction: 1990, MAN 125KVA diesel generator Chodpfx Ajw U N Dasb Tsf

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Laser power: 3KW, 6KW, 12KW Cedpfswz Ukyjx Ab Tohf Standard hardware: waste car, fully automatic butter injection, dual-control workbench, adaptive multi-angle site placement, beam light curtain Optional hardware: fire bricks, high-pressure proportional valve (standard for 6KW and above), safety door lock, Independent laser cabinet, rear exchange table light curtain, rear lifting light barrier, Rear camera, internal camera, monitoring display, radiation-proof glass, upper cover fan, upper cover, partition dust removal

Year of construction: 2025, condition: new, functionality: fully functional, Complete - New MWM GAS generator set, CHP as option, Generator 10500V/50Hz Chjdpfx Asv Uag Isb Tef

Condition: new, functionality: fully functional, power: 3 kW (4.08 HP), Year of construction: 2025, Equipment: air conditioning, cooling unit, G16 Type: Two chucks Chedpfswz Ufwjx Ab Tsf