Used Vibratory Finishing Machine for sale (84,693)

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: ZCVS250, total width: 1,100 mm, total height: 950 mm, overall weight: 350 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.13 kW (1.54 HP), power: 1.13 kW (1.54 HP), workpiece width (max.): 190 mm, workpiece length (max.): 190 mm, Equipment: CE marking, ZCVS 250 CIRCULAR TYPE OF VIBRATORY MACHINE * Net 250 liter volume (Capacity between 125lt to 1250lt is available up to request) Ijdpfx Adjrkmv Sjnsa * Highly wear resistant P.U.Lining (90 Shore) * Dosing pump included. * Changeable valf for the wastewater decharging *According to requested diameter size for seperator MOTOR: * High performance three phase current drive motor. * 1,1 kW 1500 rpm (Italian OLI) * The motor is lubrication free. You don’t need motor lubrication. CONTROL PANEL: * Main switch and emergency stop switch. * Timer and working hours timer * Control box with switch for engine right/left running * CE safety standard PAINTING: *Colour in RAL 5003 & RAL 7001 *Epoxy paint is used to ensure long life of the paint.

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 1057/17, total height: 2,000 mm, overall weight: 5,000 kg, total length: 4,500 mm, total width: 1,700 mm, input voltage: 400 V, power: 3 kW (4.08 HP), SIDEROS ROTOCLEAN Vibratory Finishing Machine - Operating voltage: 400 V - Frequency: 50 Hz Ijdpfjxw Tl Ssx Adnja - Max. load capacity: 1000 kg - Including mobile extraction system from SIDEROS Attention: The item must be collected between 19 and 23 January 2026 on a binding appointment still to be agreed. FCA D-76571 Gaggenau – loaded onto truck

Condition: excellent (used), Year of construction: 1989, operating hours: 3,304 h, machine/vehicle number: 592, Item number MA1168 Manufacturer Rössler Iedpfxori S Hyj Adnja Type R300 A/SM Year of manufacture 1982 Machine no. 592 Control Rössler Weight [kg] 1500 Connected load 380 V Operating hours [h] 3304 Equipment Grinding material, circuit diagrams Accessories The system is in very good condition and fully functional

Condition: used, The RGM 3, a top-tier Tube End Finishing Machine from KNUTH, is designed for precision and efficiency in tube processing. Its rigid construction and small footprint make it an ideal choice for any workshop looking to optimize space without sacrificing performance. The machine features a jaw chuck at the front and a clamping chuck at the rear, allowing for versatile operations. Additionally, it comes equipped with a tube cutter and an inside deburrer, ensuring clean and accurate finishes on all types of tubing. With the inclusion of a mobile base, the RGM 3 offers easy maneuverability, enhancing its usability. Whether you need to perform intricate tube work or handle larger projects, this highly robust machine is built for the task. Don't miss out on the opportunity to enhance your tube and profile processing capabilities; order online today to bring the RGM 3 to your workshop. Iedpfx Aeuxc Rhsdnea

Year of construction: 2004, condition: used, Control Siemens Sinumerik connected load 12 kVA Iedpfxjxwdwls Adnoa In our opinion, the machine is in good used condition and can be viewed under power by appointment. Including Felsomat FZ250 Loading system Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Vibratory Finishing Bowl ROTO-FINISH type ST20M4H Capacity: 200 L Bowl dimensions: Ø 1200 mm Iedpsxwn Uuofx Adnea Inside dimensions: Width 230 mm Useful depth: 250 mm With automatic conveyor exit sBowl reconditioned in 2010 Coating in very good condition (see photos) Electrical panel in very good condition Voltage: 220 V Tri Dimensions (L x W x H): 1500 x 1800 x 1500 mm Weight: approx 1 T

Condition: new, Year of construction: 2025, machine/vehicle number: ZGS200, 200 l Capacity * 7.5 kW high-performance three-phase drive motor. * Adjustable speed control up to 300 rpm. * Control panel and dosing pump included. - The dosing pump automatically adds the chemical to the tank * Working hours timer Iodpfx Adow Hb Tfsnoa * PLC panel programmable on request * PU or INOX plate * Replaceable valve for wastewater drainage. * Inner tank features channels and cavities to ensure a non-stick wall.

Condition: good (used), Year of construction: 2021, operating hours: 271 h, functionality: fully functional, Vibratory finishing machine Trowal CF 200, year of manufacture 2021, serial no.121-08525, 271 operating hours, gross container volume 200 liters, maximum workpiece size 170 mm, screening area 2190 cm², weight 740 kg. Isdpfx Aexwmx Esdnoa

Condition: not inspected (used), Object type: Vibratory Finishing System incl. Water Treatment Manufacturer: Walther Trowal Model: CD 400 Year of manufacture: 2005 Machine number: 23002436 Condition: Not tested Delivery terms: Free loaded on truck Payment terms: Advance payment prior to collection Availability: Immediate Location: 45549 Sprockhövel, Germany Technical data: • Gross volume: 420 l • Usable volume: 251 l • Maximum possible workpiece size: 250 mm Isdpfx Aewm R Ixednja • Max. drive power at 1,500 rpm: 2.6 kW • Speed: 1,000 / 1,500 rpm • Max. centrifugal force: 33,680 N • Recorded operating hours: 9,590 (CD 400) • Last maintenance: September 2024 • Including centrifuge / water treatment Walther Trowal ZM 03, year of manufacture 1999 Dimensions & weights: • Installation dimensions (L x W x H) approx.: 5,000 x 1,900 x 1,700 mm • Weight approx.: 1,500 kg If you have any questions or if you would like to arrange a viewing, please contact us. Additional notes: • Transport to the destination can be offered upon request. • The quoted price is net plus VAT. • The goods are sold excluding any warranty! • Sale only to businesses! • Technical data without guarantee. • Subject to prior sale.

Condition: good (used), Pot diameter 600 mm Vibration: adjustable Iedpfx Ash Rfffjdnsa

Condition: good (used), Year of construction: 1991, Shaker with triangular special stones Ijdpon I Rqcsfx Adnsa

Condition: good (used), Walther CN - 550 -PN Vibratory Finishing System & Rösler Z300 Turbo Floc Centrifuge -Walther Trowal CN-550-PN -1460 rpm -550-liter capacity -3.5 kW motor -Pneumatic acoustic cover -Control cabinet -SEPARATION DEVICE -Wastewater/discharge unit Iodpfxjv Dlzpo Adnea -Compound & abrasive media, 2 x boxes -Documentation -Dimensions: LxWxH 2x1.8x1.8 meters / Weight 1500 kg -Rösler - Z300 Turbo-Floc / Centrifuge -Year of manufacture: 1996 -Rotor speed: 3160 rpm -Power: 4 kW -Max. throughput: 800 liters/hour -Documentation -Dimensions: LxWxH 1.7x1x1.6 meters / Weight 400 kg Subject to errors and omissions.

Condition: new, Year of construction: 2025, machine/vehicle number: ZCV50, ZCV 50 CIRCULAR TYPE VIBRATORY MACHINE * Net volume of 50 liters (Capacity from 20 L to 1250 L is available upon request) * Highly wear-resistant polyurethane (PU) lining (90 Shore) MOTOR: * High-performance three-phase drive motor * 0.34 kW, 1500 rpm * The motor is maintenance-free – no motor lubrication is required. CONTROL PANEL: * Main switch and emergency stop switch * Timer and working hours counter * Control box with switch for motor right/left rotation * CE safety standard PAINTING: * Colour in RAL 5011 & RAL 7036 Iodpfjw Dp Ekox Adnoa * Epoxy paint is used to ensure long-lasting coating durability.

Year of construction: 2015, condition: used, control Siemens Isdpexq Hknofx Adnja number of workstations 4 Stück CAB unit 2 Stück Workpiece spindle: 4 Stück Height in the middle of the circular indexing tabl 1396 mm tail stock 4 Stück Workpiece spindle speed (3x) 3000 1/min Speed ??CAB unit (2x) 6000 1/min Rotary table speed (1x) 1435 1/min Workpiece spindle drive 9 Nm CAB unit 6 Nm round table 0,75 kW In our assessment, the machine is in good condition and can be inspected under power by appointment. The machine was used for cam machining. Comprehensive operating instructions are available. See the installation plan in the PDF document. Accessories, tools, and clamping devices shown are only included in the scope of delivery if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: excellent (used), functionality: fully functional, In addition to the machines mentioned and shown, we have many other machines and accessories (blast systems, conveyors, and small machines) available from stock. The machines can be purchased or rented. Contact us for (free) advice in the field of vibratory finishing, tumbling, and blasting technology. Iedewfdbcspfx Adnsa

Condition: good (used), Vibratory bowl for screwing technique Cup diameter 320 mm Iodpfx Aeg Andujdnoa

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 12049, product width (max.): 330 mm, working width: 330 mm, roll width: 330 mm, roll diameter: 700 mm, feed rate X-axis: 36 m/min, feed length X-axis: 300 mm, film width: 330 mm, operating speed: 36 mm/s, Digicon series 2 2010 model specifications: • Web Width: 330 mm • Flexo Varnishing Unit: 1 unit • Rotary Die-Cutting Unit: Equipped with a K&B GapMaster system • Maximum Unwind Roll Diameter: 700 mm • Running Speed: Up to 36 meters per minute at a 300 mm repeat length • Plate Cylinder Flexo Sizes: • Minimum: 10 inches (254 mm) • Maximum: 24 inches (609 mm) • Maximum Rewind Diameter (Single Spindle): 600 Iodowqdyvepfx Adnea - Rotary and flat blade spitting

Condition: excellent (used), Year of construction: 2022, overall weight: 2,550 kg, controller manufacturer: SIEMENS, controller model: S7, CONTROLS .. CNC controls SIEMENS S7 Isdpfoxnwa Ujx Adnoa ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. total weight approx.: 2550 kg Stream finishing machine with robot loading for processing watch parts with a dry polishing process - Automatic loading from the right - 3 workpieces weighing up to 2 kg - One lifting unit for each workpiece - Media capacity: approx. 220 liters - High-quality machine enclosure

Condition: new, Year of construction: 2025, * 60 lt Capacity * 2,2 kW High performance three phase current drive motor. * Adjustable speed control up to 200 rpm. * Control panel and dosing pump included. - The dosage pump automaticly puts the chemical to the bowl * Working hours timer * PU or INOX plate * Changeable valve for the wastewater decharging. Isdpfxsh Nnbce Adnea * Inner bowl has canals and gaps for ensuring non stick wall.

Year of construction: 2012, condition: used, Control Siemens In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 identical machines available. Technical features: - PLC controlled, Siemens Accessories, tools and clamping devices shown are only part of the scope of Isdpsxqrg Isfx Adnea delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, The PRS 76 is a top-tier Tube End Finishing Machine designed specifically for efficient tube and profile processing. This advanced machine features a powerful 3 kW motor that allows it to grind various materials effortlessly. With its innovative rotating design, the PRS 76 enables you to grind at any angle between 30° and 90°, accommodating diameters from Ø 20 mm to Ø 76 mm. It comes equipped with two K36 grinding belts, measuring 100 x 2000 mm, ensuring you have everything needed for optimal performance. Ideal for both tubes and profiles, the PRS 76 stands out for its ease of use and versatility. Enhance your workshop's capabilities with this robust machine. You can request a quote today to learn more about the PRS 76 and discover how it fits into your tube end finishing requirements. Iodpfxeuxdb Us Adnea

Year of construction: 2023, condition: like new (used), functionality: fully functional, 4 axis stone CNC machine for edge finishing/ tap and sink holes - fits BT40ER40/80 - 15 tool holders included - vacuum pump included - including automatic zero point determination via compressed air cylinders - excluding water installation - control cabinet dimensions 900x600x1800 mm Iedpfjv Dulqox Adnja

Year of construction: 2008, condition: good (used), Machine type: Finishing machine Manufacturer: Supfina Grieshaber GmbH & Co. KG Model: 622/1 Serial number: 760001 Year of manufacture: 2008 Available immediately Ex site for self disassembly Iedpelrt Sajfx Adnoa Optionally we can offer dismantling and loading

Year of construction: 2016, condition: ready for operation (used), Various sewing and joining machines for upper finishing in the shoe manufacturing industry are available. 1) Plastic and leather welding machine Pfaff 8304-04247, year of manufacture: 1999, max. temperature: 700°C, max. welding speed: 20m/min, machine dimensions X/Y/Z: approx. 1150mm/750mm/1400mm, weight: approx. 130kg. 2) Heel closing ironing machine Elettrotecnica 443/V, year of manufacture: 2013, max. temperature: 180°C, heating time: 30s, machine dimensions X/Y/Z: approx. 1000mm/600mm/1350mm, weight: approx. 180kg. 3) Repair sewing machine Global SR 9929, year of manufacture: 2012, max. sewing speed: 2000stitches/min, max. stitch length: 8mm, presser foot lift: 14mm. 4) Flat ironing press Global WJ-62, year of manufacture: 2016, max. temperature: 200°C, heating time: 60s, working area X/Y: 380mm/380mm, weight: approx. 60kg. 5) Overlock machine Pfaff 918-49, needle: 1, threads: 3, stitch length range: 1mm-4mm, presser foot lift: 10mm, max. sewing speed: 4000stitches/min. 6) 2x rotary table ironing machines Sabal M 108-A, year of manufacture: 2014, max. temperature: 180°C, machine dimensions X/Y/Z: approx. 1000mm/800mm/1500mm, weight: approx. 300kg. 7) Strobel machine Strobel KL141-23, sewing system: single-needle chainstitch, stitch length range: 3.5mm-7mm, max. sewing speed: 1800stitches/min, weight: approx. 50kg. An on-site inspection is possible. Isdpfxjxnp R Eo Adnoa

Condition: used, The RGM 2 is a state-of-the-art Tube End Finishing Machine designed by KNUTH, renowned for its robust and precise engineering. With a rigid design and a small footprint, this machine is perfectly suited for shops that require efficiency without sacrificing performance. The RGM 2 features an impact chuck at the front and a clamping chuck at the rear, ensuring secure handling of various tube sizes. Additionally, it includes a tube cutter and an inside tube deburrer, which provide a complete solution for finishing operations. For mobility, the machine is equipped with a mobile base. When looking for a reliable Tube End Finishing Machine, the RGM 2 stands out with its advanced features. Don't hesitate to request a quote today to enhance your tube processing capabilities with this exceptional product from the renowned KNUTH brand. Iodpjp Atgbefx Adnja