Used Super Finishing Machine for sale (66,742)

Year of construction: 2018, condition: used, workpiece length 600 mm Total weight approx. 4985 kg In our opinion, the machine is in very good used condition Codpfx Aljxfwflsbjrg and can be inspected under power by appointment. Engineering year: 1994 complete retrofit: 2018 Accessories and technical characteristics: - 160 mm jaw chuck Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Year of construction: 2015, condition: used, control Siemens number of workstations 4 Stück CAB unit 2 Stück Workpiece spindle: 4 Stück Height in the middle of the circular indexing tabl 1396 mm tail stock 4 Stück Workpiece spindle speed (3x) 3000 1/min Speed ??CAB unit (2x) 6000 1/min Rotary table speed (1x) 1435 1/min Workpiece spindle drive 9 Nm CAB unit 6 Nm Cedpfx Aljzi E D Dsbjrg round table 0,75 kW In our assessment, the machine is in good condition and can be inspected under power by appointment. The machine was used for cam machining. Comprehensive operating instructions are available. See the installation plan in the PDF document. Accessories, tools, and clamping devices shown are only included in the scope of delivery if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Year of construction: 2012, condition: used, Control Siemens In our opinion, the machine is in good used condition and can be inspected under power by appointment. Cjdpfx Aozi E Dqolbjrg There are 2 identical machines available. Technical features: - PLC controlled, Siemens Accessories, tools and clamping devices shown are only part of the scope of delivery ifthis is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Year of construction: 2004, condition: used, Control Siemens Sinumerik connected load 12 kVA In our opinion, the machine is in good used condition and can be viewed under power by appointment. Including Felsomat FZ250 Loading system Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Crsdexwdwlopfx Albjg Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Year of construction: 2000, Technical details: workpiece diameter: 26 mm Csdpfx Aljw Nxkfeberg swing diameter: - mm workpiece length: 66 mm total power requirement: 12 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 3,14 x 1,69 x 2,2 m The machine has so far processed the parts in a stream, i.e. without interruption. Piston rods are usually machined with a clearance, requiring the finishing stone to be placed only when the part passes under the stone. 1. Feed Roller 2. Stone holder, 10 pieces, 50 mm new guides can be made between approx. 15 to 40 mm The Roller of Nagel: Dia: approximately 120 mm L: app. 880 mm *

Year of construction: 2013, condition: used, Technical details: swing diameter: 80 mm workpiece length: 450 mm Csdpfx Aljixl Ahsborg weight of the machine ca.: 3500 kg

Year of construction: 2023, condition: used, Empty weight: 2.850 kg Dimensions (LxBxH): 203 x 247 x 209 cm Working height: 90 cm Serial number: FTR-15-1507 Power: 400 V/50 Hz Current: 32 A Power: 16 kW Maximum workpiece width: 1,500 mm Maximum height: 170 mm Minimum height: 0.6 mm Conveyor belt speed: 0.3 to 10 m/min Controls: touchscreen Machine dimensions: 2,037 x 2,478 x 2,090 mm Conveyor working height: 900 mm Weight: 2,850 kg Hour meter: 2,989 New price in 2023 (documented, from administration): EUR 191.500 Online auction of modern and very well maintained metalworking machines (e.g. 2023 BYSTRONIC BYSMART FIBER 3015 10kW laser incl. tower- and sheet storage modules complete, 2x 2023 BYSTRONIC XPERT PRO press brakes, 3x 2023 VALK WELDING incl. PANASONIC welding robots, Q-FIN deburring and finishing, KASTO automatic saws, SIEGMUND welding clamping tables, HAAS machine tools etc.), previously in use at Lemken, the well-known manufacturer of agricultural equipment - including plows and seeders - in Dinteloord, The Netherlands, due to the relocation of the manufacturing. The online auction opens Thursday 3 September and closes Thursday 8 October. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 6 October Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices. Cedpfx Alozyq Ivsbsrg

Condition: good (used), Year of construction: 2006, machine/vehicle number: 06202305, functionality: fully functional, total length: 14,000 mm, working width: 360 mm, Schober Converting Machine - Die-cutting units - Reel to sheet Crjdpfx Aow Ec U Ijlbog - Fanfold - Magnetic stripes - Air shock web width 360 mm

Condition: used, Year of construction: 2008, Spraying machine CEFLA FINISHING EASY 2000 DUO D Pictures are only sample - Producer Cefla - Type EASY-DUO - Year of construction 2008 - Working width 1300 mm - Operating side, left - Prize for overhauled machine - Actual condition, machine is not overhauled - Duo gun drive system - Dry filter system - Exhaust air 12.000 m³/h - Transport belttransport System - Feed speed adjustable 2 - 8 m/min - Belt cleaning system with roller Cjdpfx Alozv Tg Tobsrg - Lacquer reclaiming system with v-belt - Number of installed lacquer circles 2 Stk. - Number of installed spraying guns 4 Stk. - spray gun type Kremlin AVX - Airmix spraying system - Height adjustment for spraying guns - Number of lacquer pumps 1 Stk. - Producer lacquer pump Kremlin 16-120 - Supply air box - Ex-prevention - Suitably for solvent based lacquer - Suitably for water based lacquer - Used machine, good condition - Length ca. 6152 mm - Width 3.700 mm - Height 2.895 mm - Total connection power 18 KW - Location, on stock - Voltage fluctuation max. +/- 5 % _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in contact with us!

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 121-02396, total height: 2,200 mm, overall weight: 4,000 kg, total length: 2,500 mm, total width: 2,000 mm, input voltage: 400 V, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between October 7, 2026, and October 14, 2026! Crodpozu Ix Usfx Albsg TECHNICAL DETAILS Drum diameter: approx. 1,450 mm MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Input current: 9 A Dimensions & Weight Dimensions (L x W x H): 2,500 x 2,000 x 2,200 mm Total weight: 4,000 kg

Condition: as good as new (ex-display), Year of construction: 2024, total height: 1,165 mm, overall weight: 800 kg, total width: 1,515 mm, tank capacity: 240 l, input voltage: 400 V, We are offering a Spaleck VA 245 vibratory finishing system, manufactured in 2024. This is a demonstration machine. Manufacturer: Spaleck Model: VA 245 Year of manufacture: 2024 Machine type: Vibratory finishing system Container volume: approx. 240L Container cross-section: approx. 285mm Crsdpfx Aleznuddebeg A suitable dryer is also available. Inspections can be arranged by appointment. If you have any questions or require further information, please do not hesitate to contact us.

Year of construction: 1993, condition: used, Two identical Dreher centrifugal drum machines are offered. Number of drums: 4, total volume: 20l, drive power: 1.5kW, direction of rotation: clockwise/counterclockwise, speed control: continuously variable. Machine dimensions: approx. 1200mm/1000mm/1600mm, weight: 280kg. An on-site inspection is possible. Csdjzv T I Depfx Alborg

Condition: used, Empty weight: 12.500 kg Length: 62 cm Serial number: B151706 Machining center consisting of: - a NAKAMURA TOME CNC lathe, model: SUPER NTJ, manufactured in 2007 - a SAMSYS+ bar feeder, model: M3000 - a FANUC 18i-TB controller - Technical specifications: Crodpezvccqsfx Albog - Number of controlled axes: 9 axes - Number of simultaneously controlled axes: 4 - Maximum turning diameter: 190 mm - Maximum turning length: 620 mm - Bar capacity: 51 mm (R/L)/ 65 mm (Left) - Chuck: 210 mm - Spindle speed: 5,000 rpm (∅51)/ 4,500 rpm (∅65 mm) - Spindle nose: A2-5 (∅51) / A2-6 (∅65) - Spindle bore: 63 mm (∅51) / 80 mm (∅65) - C-axis: 0.001° - 600 rpm - B-axis: -91° to +91° - 180°/s - 2 turrets: 24 stations - 12 powered tools - Powered tool speed: 60 to 6,000 rpm - X1 travel: 345 mm - X2 travel: 167.5 mm - Z1 travel: 1,240 mm - Z2 travel: 685 mm - Y-axis travel: 45 mm - Feed rate: X1/X2 16 m/min - Z1/Z2 40 m/min - Machine weight: 12,500 kg - Approximate dimensions: L 3,660 mm x W 2,320 mm x H 2,170 mm Hours on the counter: approximately 2,960 hours of use Online auction held following the closure of the "Supadis" production facility in Le Plessis-Pâté (91), a company specializing in precision machining. This sale includes more than 100 lots, notably several 3-, 4-, and 5-axis CNC machining centers from “Matsuura,” “OKK,” “Biglia,” and “Nakamura Tome,” as well as a “Kasto Functional A” automatic saw. The lot also includes grinding machines, a “Cincinnati” column drill press, “Trimos” and “Mitutoyo” measuring columns, as well as numerous tools, workbenches, and inspection equipment. The sale also includes stocks of raw materials (steel, aluminum, titanium, “Inconel,” “PEEK,” copper, etc.), workshop equipment, compressors, shelving, and various material-handling equipment. Sale organized by Dome Auctions France, OVV No. 331-2026, auctioneer Blandine Camper. The online auction opens Tuesday 18 August and closes Thursday 24 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 22 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and...

Year of construction: 2014, condition: used, Empty weight: 4 kg Length: 78 cm Serial number: 22220 V251403 5-axis machining center comprising: - a NAKAMURA lathe, TYPE: NTMX, year: 2014, 5-axis dual-spindle + milling head. - a SAMSYS+ bar feeder, Model: M3000, year: 2014 - an LNS YOSHIDA chip conveyor Technical specifications: - capacity: - max turning diameter: 200 mm - Max turning length: 780 mm - Distance between centers: max 980 mm / min 210 mm - Bar capacity: 51 mm on both left and right - Chuck size: 165 or 210 mm - Axis travel: - X1/X2 slide travel: 570 mm / 130.5 mm - Z1/Z2/B2 slide travel: 1,297/658/770 mm - Y-axis travel: ±100 - Left/right spindle: - Speed: 5,000 rpm - Tool spindle: - Speed: 12,000 rpm - Tool type: CAPTO C4 - Number of tools in magazine: 24 - Max. tool diameter: 60 mm - Max. tool length: 180 mm - Max. tool weight: 4 kg - Indexing range: 190° - Turret: - Type: 12-sided drum turret - Number of indexing positions: 24 - Square tool size: 20 mm - Round tool size: 20 mm diameter - Spindle speed: 6,000 min⁻¹ - Floor dimensions: L 4,225 mm x W 3,015 mm x H 2,650 mm - Approximate machine weight: 14,500 kg Hours on the counter: approximately 3,622 h Sold with 1 cabinet and 2 workbenches, including contents Online auction held following the closure of the "Supadis" production facility in Le Plessis-Pâté (91), a company specializing in precision machining. This sale includes more than 100 lots, notably several 3-, 4-, and 5-axis CNC machining centers from “Matsuura,” “OKK,” “Biglia,” and “Nakamura Tome,” as well as a “Kasto Functional A” automatic saw. The lot also includes grinding machines, a “Cincinnati” column drill press, “Trimos” and “Mitutoyo” measuring columns, as well as numerous tools, workbenches, and inspection equipment. The sale also includes stocks of raw materials (steel, aluminum, titanium, “Inconel,” “PEEK,” copper, etc.), workshop equipment, compressors, shelving, and various material-handling equipment. Sale organized by Dome Auctions France, OVV No. 331-2026, auctioneer Blandine Camper. Crodpfszvccdjx Albog The online auction opens Tuesday 18 August and closes Thursday 24 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Tuesday 22 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online...

Condition: like new (used), Year of construction: 2019, Turbo-HKS Centrifugal Barrel Finishing System P100-B250/250-0-PP – New, Unused For sale is a Turbo-HKS centrifugal barrel finishing system in new, unused condition. The machine was manufactured in 2019 and was intended as a pilot system but was never integrated into production. Accordingly, it is in very good condition. Technical data: Manufacturer: Turbo-HKS GmbH, Germany Type: P100-B250/250-0-PP Year of manufacture: 2019 Machine number: 52063 / 15240 Operating voltage: 400 V Frequency: 50 Hz Current consumption: 17.96 A Barrel diameter: 350 mm Barrel height: 287 mm Barrel wall thickness: 12 mm Capacity: 250 liters Csdpfxezb Ab Es Albsrg Initial filling: 260 liters Maximum speed: 70 rpm Barrel material: EN AC-AlSi7Mg (T6 heat-treated) Application areas: • Deburring • Polishing • Smoothing • Edge rounding • Surface finishing • Processing of metal and precision parts Special features: • New condition • Unused system • German quality machine • Very robust industrial design • High processing performance • Ideal for series production and precision machining Inspection possible by appointment. Location: Göppingen, Germany

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, used wet polishing machine from PERS, model Vibra-Line B 150 l, with buffer tank, in combination with PERS dryer Vibra-Dry A 200 l - both demo machines Technical data / Vibra-Line B 150 l: U-shaped work container with automatic discharge Capacity (gross): 150 l Usable volume (depending on workpiece geometry and material): 80 l Year of manufacture: 2024 Diameter, external: 1,170 mm Height: 860 mm Lining in the bowl: 22 mm, yellow or brown PU Total weight (empty): 320 kg Drive power: 2.2 kW Electrical connection: 3 x 400 V, 16 Amp. CEE Device color: RAL 7015/7035 Control cabinet with touch panel and frequency inverter Buffer tank – 90 l: The compound (soap solution) itself flows through the filter basket into the buffer tank, from which a submersible pump pumps the water back to the rotary vibrator. Dimensions of the buffer tank (L x W x H): 700 x 400 x 460 mm 1 submersible pump and 1 filter basket (630 µm) are included Technical data / Vibra-Dry A 200 l: Corn/grain dryer with automatic discharge - vibration dryer Year of manufacture: 2024 Volume: 220 l Motor power: 1.5 kW Heating: 3 kW per element (PTI temperature control) Capacity, workpieces: up to 65 kg Capacity, corn: 25-35 kg Credpfx Aley A N U Ajbog Speed: 1400 rpm Heating effect: 6 x 1.5 kW Length: 1,141 mm Width: 1,200 mm Height: 905 mm Internal dimensions of the bowl: 240 mm Electrical connection: 3 x 400 V, 16 Amp. CEE Device color: RAL 7015/7035 Corn granule temperature: +30 to +50 degrees Digital temperature control pneumatically controlled outlet valve For commissioning, 25 kg of corn kernels of type GM 16 or GM 20 must be used.

Year of construction: 2015, condition: ready for operation (used), One Tinkap drag finishing machine is available. Tools: 12/cycle, Throughput: approx. 144tools/h, Clamping range: 42mm, Max. tool length: 250mm, Processing heads: 2, Tool holders: 2x6. Documentation available. An on-site inspection is possible. Credpezhb E Uofx Albsg

Condition: ready for operation (used), Year of construction: 1996, A custom-built Schuster groove machining machine is available. Components: separation magazine, centering unit, end machining insertion end, round groove milling unit, 90° turning unit, trapezoidal groove milling unit, groove deburring unit, sawing unit, end machining shaft, insertion end deburring unit, inspection and carrying unit and embossing unit. Overall system dimensions X/Y/Z: approx. 8000mm/2400mm/2500mm, weight: approx. 13000kg. The electronics were overhauled in 2015. Including coolant tank and chip conveyor. Documentation available. An on-site inspection is possible. Crsdpfsy Hvp Uox Albeg

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, Otec DF3-4 Type of machine: Drag finishing system Manufacturer: Otec Model: DF3-4 Year of manufacture: 2008 Control system: Siemens Origin: Germany Location: Albstadt Delivery time: upon agreement Technical data: - Machine dimensions: 1180 x 970 x 2010 mm - Working container useful volume: 80 liters - Maximum immersion depth: 250 mm - Weight: 420 kg - Connection voltage: 400 V - Connection power: 7.5 kVA - Maximum workpiece diameter: 250/210 mm - Maximum workpiece weight: 15 kg Accessories: - Various fixtures (see pictures) - 2 trolleys for transporting the tub - One spare tub for the finishing medium - Documentation Cedpfxszty Apj Albsrg

Year of construction: 2019, condition: used, The Lemorau MEBR+ is a digital finishing machine based on a modular concept, allowing modules to be added according to customer requirements. The MEBR+ operates in full rotation and semi-rotation modes. The semi-rotation mode is suitable for small print runs, while the full rotation mode is ideal for large print runs at high speeds. Thanks to state-of-the-art servo technology, the registration tolerance remains consistent during acceleration and deceleration phases, as well as throughout the production process. The Lemorau MEBR+ is equipped with a servo-controlled compensation system, which ensures excellent web tension control when the machine operates in semi-rotative mode. Standard features: - Maximum rotation speed 200 m/min (656 ft/min) – label stock - Maximum rotation speed 120 m/min (394 ft/min) – die-cutting, precision fit - Maximum semi-rotation speed 40 m/min (131 ft/min), depending on the plate size – die-cutting, precision fit - Web width 250, 330, 400 mm (10, 13, 16 in) - Electronic counter (label/meter/roll counter, as well as total meter and label counter) - Adjustable splicing table with pneumatic clamps - Electronic web guiding system with ultrasonic sensor for guiding opaque and transparent materials Crsdpfx Alozqnxtobog - Automatic web tension control via servo motors – constant and decreasing tension - Memory for 250 jobs for easy and quick job setup - 6 sets of rotary knives with lateral adjustment - 2 interchangeable pneumatic unwinders with a diameter of 25, 40, and 76 mm (1, 1.5, 3 in) - Detection of paper and matrix tears - Winding upon label entry/label exit - Remote support via internet connection - Automatic stop at the end of the parent roll with programmable end-of-roll function - Semi-automatic winding - Foot pedal for step-by-step machine operation - Multilingual touchscreen - Die-cutting repeats 203.20 – 431.80 mm (8 – 17 in) – rotation mode - Die-cutting repeats 41.30 – 371.00 mm (1.6 – 14.6 in) – semi-rotation mode - Maximum winding diameter: 600 mm (23.7 in) with 1 shaft / 350 mm (13.8 in) with 2 shafts - Maximum unwinding diameter: 700 mm (27.5 in) - CE conformity certificate Optional equipment: 1 anti-static bar 1 "Clear-on-Clear" sensor 1 corona treatment 1 speed package (80 m/min in semi-rotation mode) 1 revolver unwinder 2 flexo unit for spot coating with rotating register 1 web cleaner QRC (Quick Remote Connection) 1 new die-cutting forme with repeat lengths of 41.30 – 371.00 mm (1.6 – 14.6 in) – semi-rotary mode approx. 700 die-cutting sheets An MAHO extraction system for the trimming waste is available as an option at an additional cost!

Condition: used, Profile Deburring Machine, Finishing Machine, Vibratory Bowl Finisher, Vibratory Polishing Machine, Used Machine Cjdpfx Ajzpvbyslborg Manufacturer: Vibrochimica Type: VBT-2E 650/3 Overall dimensions: 2260 x 1870 x 1450 mm Year: 2002 Weight: 1160 kg Electrical data: 400 V; 5.5 kW d: 840 mm D: 1360 mm Torus Ø: 430 mm The inner deburring surface is in damaged condition. The damage is shown in the photos.

Condition: good (used), Year of construction: 1976, Trovalizing machine WALTHER E 5, serial number 12.238, power 0.25 kW, year of manufacture 1976. Crsdpfxeztc Axo Albog

Condition: good (used), functionality: fully functional, ROSLER PARKER vibrator Type VR 30 Internal tank dimensions: 1170 x 500 Credpfx Ajzr Hb Nslbog Depth: 500 Lining in good condition. Can be seen in working order at my workshop.

Year of construction: 1997, condition: good (used), machine/vehicle number: 403970905140, Offer 23291 Technical data: Tube end-working machine with six-fold turret - tool holder. Tube diameter 6 - 40 mm Credpfxjpr Utlo Albsg Max. Forming length 100 mm Drive 400 V / 7,5 kW Space requirement approx. W 1200 x D 2100 x H 1500 mm Weight approx. 1400 kg

Condition: used, Manufacturer: SPALECK Drum diameter: 1100 mm Csdpey Nlmbsfx Alborg