Used Vibratory Compactor for sale (521)

Condition: new, Year of construction: 2025, The ERBA EVP-RA 350 vibratory finishing machine features a rising, sloped process bowl floor with integrated separation. It is equipped with an easily replaceable screening unit and offers high operational efficiency thanks to the built-in drop step. Discharge and separation are carried out via the integrated flap (manual or pneumatic operation). Upon request, a reinforced suspension and a more powerful motor can be installed for higher loads. The motor speed can be continuously adjusted using a frequency inverter (optional). The EVP-RA 350 can be linked with other machines via its side discharge port. The system can be equipped with a fully automatic PLC control system (optional). ERBA vibratory finishing systems are distinguished by their durability and long service life, based in part on the hot-cast polyurethane lining of the process bowl. Technical data: - Gross volume: 385 liters - Channel width: 340 mm - Vibration motor power: 2.2 kW - Speed: 1,400 rpm - Inner bowl diameter: 1,200 mm All prices are net, excluding the currently applicable statutory VAT and freight costs. Nodpfxon Ut Ure Affedf Some images may show the machine with accessories that are available as options and subject to additional charges. If you are interested, please contact us. We would be happy to advise you without obligation. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This listing serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunications (e-mail, phone, or messaging portal). You will first receive a non-binding offer from us, which will also provide information about our general terms and conditions, legal notice, and your right of withdrawal before any purchase or contract is concluded.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Vibrations – vibratory finishing machine combined with a maize dryer Njdpfsxz N Uqjx Affodf

Condition: good (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 1057/17, total height: 2,000 mm, overall weight: 5,000 kg, total length: 4,500 mm, total width: 1,700 mm, input voltage: 400 V, power: 3 kW (4.08 HP), SIDEROS ROTOCLEAN Vibratory Finishing Machine - Operating voltage: 400 V - Frequency: 50 Hz Ndjdpoxw Tl Sjfx Affsf - Max. load capacity: 1000 kg - Including mobile extraction system from SIDEROS Attention: The item must be collected between 19 and 23 January 2026 on a binding appointment still to be agreed. FCA D-76571 Gaggenau – loaded onto truck

Condition: ready for operation (used), Year of construction: 2010, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2010 Pressing force: 532 kN Voltage: 400 V Maximum bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2,403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 19.5 x 65 x 111.5 cm Condition: very good! Functionality checked. FLITS Rental & Sales service: with every machine we include a bundle of baling wire (120 wires). Do you require additional bundles of baling wire? Please request a complimentary quote. Nedpfxoxz Dwte Affjdf At FLITS Rental & Sales, you choose speed, transparency, and reliability. We think along with you, respond immediately, and ensure you quickly receive the right machine. You are very welcome to view the machines at our premises. We are located at Schoterlandseweg 94, 8413NE Oudehorne. Visits are by appointment, so we can take the time to advise you thoroughly and present the most suitable machines. We are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste processing

Condition: used, Vibratory Bowl Feeder / Sorting Device / Bowl Feeder / Vibratory Feeder by RNA Vibratory bowl, sorting device / screw feeding unit with vibratory feeder for screwdriving technology Feeding system, feed unit Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-B200-2R Year of manufacture: approx. 2000 Bowl diameter (top): 200 mm Bowl diameter (bottom): 130 mm Ndedpfxjxw Rdle Affef Bowl internal height: approx. 25 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 225 mm Control voltage: 24 Volt DC (external power supply required) Mains connection: 230 Volt, 50 Hz - An external 24 VDC power supply is required for start/stop signals (the controller does not have an internal 24 VDC power supply). - Control unit REO type Reovib R6 / 439 for adjustable vibration speed - The feeder was used for supplying automotive blade fuses - Mounted on an aluminum profile stand Space requirement Ø x H: 240 x 250 mm Weight: 17 kg Good condition A bowl feeder always consists of two essential components. 1) Sorting bowl, in which the parts are oriented 2) Drive unit, which generates vibrations in the sorting bowl via mechanical oscillations, thereby moving the parts.

Condition: used, mileage: 161,000 km, Year of construction: 2017, Serial number: YV2XTY0CXHA81xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21804 Specifications: 6x2 with steering on axle 3 Good tires Air suspension Euro 6 Roof light bar Extra lights and rear-view camera 161,000 km Total length: 880 cm Ndjdpoxw Niyjfx Affsf Width: 250 cm Wheelbase: 460/135 cm 460 hp Weight system and printer Joab body from 2017 19 m³ chamber Winch I-Shift Ready for delivery Description:Good truck with full service history. Tires are ok/good.Low mileage and EU-approved until 20.04.26.Ready for delivery. Video available. Km: 161000 HK: 469 Technical approved: Yes EU-approved until: 20.04.2026 Own weight: 15350 Total Weight: 28000 Payload: 12575 Width: 250 Length: 880 Euro: 6 Model: FM460 6x2 komprimatorbil med Joab 1-kammer

Condition: new, Year of construction: 2025, Machine type: ESA 15 Manufacturer: ERBA Power kW: 3,37 Sludge basket volume: 15 lt. Description: The ESA 15 recirculating centrifuge from ERBA (patent no.: 201606464) is a professional stand-alone unit for the treatment of process water for vibratory finishing systems. It has a waste water tank with agitator, as well as a clean water tank and can produce up to 600 L of fresh water per hour. Dirt particles are separated from the process water with 1500 g-force and removed as a solid cake. The programmable logic controller (PLC) with touch screen makes the condition of the machine particularly easy. The ESA 15 is also very space-saving due to its compact design. Nedpfxjn Utxve Affjdf The indicated price is net plus the currently valid legal sales tax and plus freight costs. The pictures may show the system incl. accessories, which are optionally available and are subject to additional costs. The indicated price refers to the basic machine. If you are interested, we look forward to hearing from you. We will be happy to advise you without obligation. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). The offer serves exclusively as an internet presentation of our goods. The contract negotiation comes about by means of telecommunication (email, telephone, message portal). In the first step we submit a non-binding offer, with which we also inform you about our general terms and conditions with imprint and the right of withdrawal before the purchase/contract is concluded.

Condition: new, Year of construction: 2025, ZGE60 - 60Lt Vibratory Sieving Machine * Changeable sieving system * 0.34 kW vibratory motor Nedpfew Hpfvox Affsdf * Start/Stop thermal switch It is used to automatically separate abrasive/polishing stones and material from each other after the deburring and/or polishing process in vibratory machines that do not have a sieving system.

Condition: excellent (used), Year of construction: 1989, operating hours: 3,304 h, machine/vehicle number: 592, Item number MA1168 Manufacturer Rössler Type R300 A/SM Year of manufacture 1982 Machine no. 592 Njderi S Hyopfx Affsdf Control Rössler Weight [kg] 1500 Connected load 380 V Operating hours [h] 3304 Equipment Grinding material, circuit diagrams Accessories The system is in very good condition and fully functional

Condition: new, functionality: fully functional, power: 3.5 kW (4.76 HP), fuel type: diesel, color: yellow, overall weight: 160 kg, Year of construction: 2025, Equipment: UVV, Wacker Neuson Vibratory Plate Compactor DPU 2540 H, - NEW - Weight: 160 kg, Frequency: 90 Hz, Centrifugal force: 25 kN, 400 mm working width, Hatz diesel engine 1B20 with 3.5 kW, Other sizes available! Machine location: Warehouse D-46514 Schermbeck. Highlights & Advantages: Reversible vibratory plate (forward & reverse travel) Perfect for paving, pathways, curbstones, foundations, gravel & soil Very low fuel consumption & long service life Low-vibration guide handle for ergonomic operation Compact design → Ideal for confined sites & small areas Applications: ✔️ Landscaping & horticulture Ndsdexyqmlepfx Affjf ✔️ Fiber optic installation ✔️ Paving & terrace construction ✔️ Civil engineering & pipeline construction ✔️ Compaction of sand, gravel, chippings, aggregate ✔️ Construction sites of all kinds _____ Buy Wacker Neuson DPU 2540 | 25 kN vibratory plate | Diesel compactor | reversible plate compactor | new Wacker compactor | 400 mm plate | DPU 2540 H price | 160 kg compaction equipment | Hatz 1B20 compactor | Professional Wacker plate compactor | Buy soil compactor

Condition: good (used), Year of construction: 2006, operating hours: 1,522 h, Manufacturer: Husmann Typ: SPB 22 SEN-E Build in: 2006 Volume: 22m3 Back door: top hingend Nedpoxbpr Asfx Affedf Lifting system: hook at the front

Condition: used, Please contact ATS Norway for more information Please provide reference number upon request: 21332 Specifications: Ndjdpfjxc Dryox Affef Side shift Working width: approx. 2.5 meters Well suited for forest roads Custom-built Ready for delivery Own weight: 1111 Model: Hitch Gummivals

Condition: new, Year of construction: 2025, The ERBA EVP-RA 550 vibratory finishing machine features a rising work bowl floor with integrated separation. It is equipped with an easily interchangeable screening unit and is distinguished by high operational efficiency thanks to the integrated drop stage. Discharge and separation are performed via the integrated flap (manual/pneumatic operation). Upon request, reinforced suspension and a more powerful motor can be installed for higher loads. The motor speed can be continuously adjusted via a frequency converter (optional). Thanks to its lateral discharge, the EVP-RA 550 can be linked with other machines. The system can optionally be equipped with fully automatic PLC control. ERBA vibratory finishing systems are known for their durability and longevity, which are largely attributed to the hot-poured polyurethane lining of the work bowl. Technical data: - Gross volume: 550 l - Working channel width: 390 mm - Unbalance motor output: 4.0 kW - Speed: 1,400 rpm - Internal bowl diameter: 1,400 mm Prices listed are net plus the currently applicable statutory VAT and shipping costs. Some images may show the machine with optional accessories that are available at extra cost. If you are interested, we look forward to hearing from you. We are happy to provide you with free and non-binding advice. The European Commission provides an online dispute resolution (ODR) platform for out-of-court settlements. This offer is for online presentation purposes only. Contract negotiations are conducted via telecommunications (email, telephone, messaging portal). In the first step, we will send you a non-binding offer, together with our general terms and conditions, imprint, and the right of withdrawal, before a purchase/contract is concluded. Nodpen Ut Uvefx Affodf

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: ZCVS250, total width: 1,100 mm, total height: 950 mm, overall weight: 350 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.13 kW (1.54 HP), power: 1.13 kW (1.54 HP), workpiece width (max.): 190 mm, workpiece length (max.): 190 mm, Equipment: CE marking, ZCVS 250 CIRCULAR TYPE OF VIBRATORY MACHINE * Net 250 liter volume (Capacity between 125lt to 1250lt is available up to request) * Highly wear resistant P.U.Lining (90 Shore) * Dosing pump included. * Changeable valf for the wastewater decharging *According to requested diameter size for seperator MOTOR: * High performance three phase current drive motor. * 1,1 kW 1500 rpm (Italian OLI) * The motor is lubrication free. You don’t need motor lubrication. CONTROL PANEL: * Main switch and emergency stop switch. * Timer and working hours timer * Control box with switch for engine right/left running * CE safety standard PAINTING: Njdporkmv Sefx Affsdf *Colour in RAL 5003 & RAL 7001 *Epoxy paint is used to ensure long life of the paint.

Condition: used, Manufacturer: Carl Kurt Drum diameter: 700 mm Motor: 1 kW Ndodpfju Abr Ejx Affjf

Condition: used, empty load weight: 271 kg, Year of construction: 2019, Hatz Diesel, Electric start Impact force: 38 kN Ndodpexw H H Njfx Affef Weight: 271 kg Plate width: 60 cm Price: € 2,400 excluding VAT Multiple units in stock!

Condition: used, Vibratory Finishing Bowl ROTO-FINISH type ST20M4H Capacity: 200 L Bowl dimensions: Ø 1200 mm Ndedpfx Aoxwn Uujffef Inside dimensions: Width 230 mm Useful depth: 250 mm With automatic conveyor exit sBowl reconditioned in 2010 Coating in very good condition (see photos) Electrical panel in very good condition Voltage: 220 V Tri Dimensions (L x W x H): 1500 x 1800 x 1500 mm Weight: approx 1 T

Condition: new, Year of construction: 2025, Machine type: EVP 1500 Manufacturer: ERBA Power kW: 11 Total volume: 1500 L Description: The EVP 1500 vibratory finishing machine from ERBA features a flat process chamber floor without separation capability. It is ideally suited for larger and heavier workpieces. Emptying or separation is carried out via a bottom discharge (manual/pneumatic). On request, the machine can be equipped with reinforced suspension and a more powerful motor for higher loads. The motor speed can be continuously adjusted by means of a frequency converter (optional). The system can also be equipped with a fully automatic PLC control (optional). ERBA vibratory finishing systems are known for their durability and longevity, which is largely based on the hot-cast polyurethane lining of the process chamber. The stated price is net, plus currently applicable VAT and shipping costs. Accessories shown in the pictures may be optionally available at additional cost. The stated price refers to the basic machine. If interested, we look forward to your inquiry. We will be happy to advise you without obligation. The European Commission provides an online dispute resolution platform (ODR platform). Njdpfx Afen Ut T Aefedf This offer serves solely as an online presentation of our goods. Contract negotiations take place via telecommunications (email, telephone, messaging platform). As the first step, we will send you a non-binding offer, along with our general terms and conditions, imprint, and information on the right of withdrawal before the purchase/contract is concluded.

Condition: new, Year of construction: 2025, machine/vehicle number: ZGS200, 200 l Capacity * 7.5 kW high-performance three-phase drive motor. * Adjustable speed control up to 300 rpm. * Control panel and dosing pump included. - The dosing pump automatically adds the chemical to the tank * Working hours timer * PLC panel programmable on request * PU or INOX plate * Replaceable valve for wastewater drainage. Ndodpfx Afjw Hb Tfefef * Inner tank features channels and cavities to ensure a non-stick wall.

Condition: good (used), Pot diameter 600 mm Nedsh Rfffspfx Affjdf Vibration: adjustable

Condition: used, fuel type: diesel, empty load weight: 484 kg, Year of construction: 2019, Weight: 484 kg Impact force: 59 kN Diesel, 1-cylinder Hatz (1b40) Forward/reverse. Electric start. Plate width: 60 cm Price per unit: €3,400 excl. VAT Nodpoxw H Hcjfx Affedf Multiple units in stock!

Condition: new, Year of construction: 2025, Machine type: EVP 550 Manufacturer: ERBA Power kW: 4.0 Total volume: 585 liters Description: The ERBA EVP 550 vibratory finishing machine features a flat-bottomed working container without an internal separator. The emptying or separation process takes place via bottom discharge (manual/pneumatic operation). Upon request, the machine can be equipped with reinforced suspension and a more powerful motor for heavier-duty applications. Motor speed can be continuously adjusted using a frequency converter (optional). The system can also be fitted with a fully automatic PLC control unit (optional). ERBA vibratory finishing machines are renowned for their durability and longevity, backed by the hot-cast polyurethane lining of the processing container. All prices are net, plus the applicable statutory VAT and shipping costs. Photographs may show the system with accessories that are optionally available at additional cost. If you are interested, we look forward to your inquiry. We would be happy to offer you a consultation without obligation. Nodpfx Afen Ut Tmjfedf The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer serves exclusively as an online presentation of our goods. Contract negotiations are conducted via telecommunication (email, telephone, messaging portal). In the initial step, we will send you a non-binding offer, which also includes our terms and conditions, legal notice, and information on the right of withdrawal, prior to any purchase or contract being concluded.

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 1,370 mm, total width: 1,370 mm, total height: 1,020 mm, overall weight: 360 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.9 kW (2.58 HP), power: 1.9 kW (2.58 HP), workpiece width (max.): 240 mm, workpiece length (max.): 240 mm, ZDV Series - Circular Type Dryers Njdpfx Afjl Sm N Tefsdf For drying after deburring and polishing Corn granule is used. Various volumes in the range of 125lt - 1650lt Includes seperating system- Resistance heated Drying for all kinds of metal and non-metal materials Suitable for automation system Optional accessories Dryer machines are used to dry the wet surfaces of the parts after the process in surface finishing machines where deburring, polishing, etc. are performed. At the same time, dryer machines help to prevent corrosion of the parts Corn cobs are used in dryer machines. Hot corn cobs absorb water from the surface of the parts during process. The dryer machines have a heating system with resistance. By the help of heating system, the drying speed increases and it saves time and energy. On the machine, there is a material loading point in order to transfer wet parts to the machine easily and a discharge slider which can take out the parts after drying easily. During drying process, the parts and corn cobs move through the ramp in the bowl to the self-discharge way. Activating the slider is enough to take out the dried parts. Thanks to ergonomically designedchassis height and springs, staff can work with high efficiency. Increased resistance against vibrations, rigid and reinforced support construction; adjustable insulators flexibly mounted to absorb vibrations are some of the distinctive design features of the machine chassis. Electrical panels with CE Certificate designed in accordance with EU standards are used. There are main switch and emergency stop switch. The working time controller and time clock are included in the standard equipment. Three-phase electrical connection is used. It can work integrated with automation systems with PLC software. Dust absorbing system is available as an option. The dimensions of the dryer machines are designed to work integrated with the previous processes surface finishing machines. Therefore, the products from the first process are able to be transferred to the material loading point of the dryer automatically.

Condition: good (used), Vibratory bowl for screwing technique Cup diameter 320 mm Nsdpfx Afeg Andusfedf

Condition: new, Year of construction: 2025, The EVP-RA 550 vibratory finishing machine from ERBA features a flat working container bottom with integrated separation, designed for processing medium to large workpieces. It is equipped with an easily replaceable screening unit. Emptying and separation are carried out through the integrated flap, which can be operated either manually or pneumatically. Upon request, reinforced suspension and a more powerful motor can be fitted to handle higher loads. The motor speed can be infinitely adjusted using a frequency converter (optional). With its side discharge system, the EVP-A 550 can be linked with other machines for integrated workflows. The system can also be equipped with a fully automated PLC control (optional). ERBA vibratory finishing systems are known for their durability and longevity, which is also attributable to the hot-cast polyurethane lining of the working container. Technical specifications: - Gross volume: 550 liters - Working channel width: 390 mm - Unbalance motor power: 4.0 kW - Speed: 1,400 rpm - Container inside diameter: 1,400 mm All prices are net plus the currently valid statutory VAT and shipping costs. The images may show the machine including optional accessories that are available at additional cost. If you are interested, please feel free to contact us. We are happy to offer professional, non-binding advice. The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). Ndodpfxjn Ut Ugj Affof This offer is intended solely as an online presentation of our goods. Contract negotiations are conducted via telecommunication (email, telephone, messaging portal). In the first step, we will make you a non-binding offer, which will also include information about our general terms and conditions, company details, and your right of withdrawal, before any purchase or contract is concluded.