Used Vibrating Chute for sale (2,432)

Condition: used, Year of construction: 1995, total length: 650 mm, total width: 1,350 mm, total height: 1,900 mm, power: 1 kW (1.36 HP), Manufacturer: Ozaf srl Model: E 10 Year : 1995 Type : Elevating belt with cleats / Giraffe conveyor.   Power : 1,5 Kw Kdedpfx Aexxcvceg Aew Equipment: vibration system Overall dimensions: 65 x 135 x 190 cm Dumping height: 120 cm

Condition: good (used), Year of construction: 1999, operating hours: 52,324 h, functionality: fully functional, X working area max.: 1270 mm Y working area max.: 1270 mm Control: Bosch Type 3 Basic Standard equipment: - Robust C-frame - Safety light barriers - Coordinate guide with integrated linear magazine - 2 clamping claws - Automatic tool changer - Automatic repositioning - Tool length compensation - Forming capability - Mono tool holder with 360° rotation for all tools - Programmable hold-down device - Multitool drive - Punch slug extraction Kdodpfxjxxbdle Ag Ajw - Brush tables - Part chute 200 x 200 mm, sorting of parts into 2 containers - NC-controlled, digital, maintenance-free three-phase drives - Network interface RJ34 - 3.5" floppy disk drive - TOPS 2000 graphical programming - Online diagnostics via modem - Operating manual + Vibration-damped installation + Multitool + Thread forming + Start post

Year of construction: 2015, condition: like new (used), AUTOMATIC CLEANING, POLISHING AND DRYING SYSTEM The system was only used for testing purposes and consists of: 1 piece heated oil removal centrifuge 2 pieces circular vibrators for cleaning/polishing Kdodpfx Asxxbcuog Asw 2 pieces swiveling, heated drying centrifuges Furthermore, it is possible to run 4 different media via the heated stainless steel tanks. The tanks, piping, and centrifuges are made entirely of stainless steel and are therefore especially suitable for acidic cleaning or pickling of components. Disassembly will cost approximately €20,000–30,000, but it can also be carried out by the buyer.

Condition: excellent (used), functionality: fully functional, power: 94 kW (127.80 HP), gearing type: automatic, overall weight: 18,000 kg, empty load weight: 7,400 kg, Year of construction: 2007, operating hours: 2,185 h, Equipment: cabin, Dieci F 7000/Concrete Mixer/4x4x4/Scale • Manufacturer: Dieci • Model: F 7000 • Year of manufacture: 2007 • Power: 94 kW / 127 hp • Drive configuration: 4x4x4 • Operating hours: 2,185 h • Max. travel speed: 20 km/h • Engine: Iveco F4GE0484C*D651 • Drive: Hydrostatic drive • Drive type: Permanent all-wheel drive (4x4) • Scale • Steering: Permanent all-wheel steering (4-wheel steering) • Drum total volume: approx. 7,000 l • Mixing capacity: approx. 5.0 m³ concrete • Self-loading front bucket: approx. 600 l • Rotating discharge chute: swivels up to 180° • Water tank: 820 litres • Vehicle dimensions: 6.48 m x 2.31 m x 3.07 m • Unladen weight: 7,400 kg • Gross weight: 18,000 kg • German machine • Immediately operational Kedpfx Asxxba Hjg Aodw _____ - Subject to prior sale. - Errors and/or typographical mistakes excepted. - Sale according to our terms and conditions.

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany, Uelzen 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals Ksdpfjxw Rpuox Ag Aedw ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Vibratory Bowl Feeder / Sorting Device / Bowl Feeder / Vibratory Feeder by RNA Vibratory bowl, sorting device / screw feeding unit with vibratory feeder for screwdriving technology Feeding system, feed unit Manufacturer: RNA Rhein-Nadel Automation GmbH Model: SRC-B200-2R Year of manufacture: approx. 2000 Bowl diameter (top): 200 mm Bowl diameter (bottom): 130 mm Bowl internal height: approx. 25 mm Sorting track width: approx. 3 mm Total height (drive + bowl with sorting track): 225 mm Control voltage: 24 Volt DC (external power supply required) Mains connection: 230 Volt, 50 Hz Kdodpfoxw Rdlsx Ag Aew - An external 24 VDC power supply is required for start/stop signals (the controller does not have an internal 24 VDC power supply). - Control unit REO type Reovib R6 / 439 for adjustable vibration speed - The feeder was used for supplying automotive blade fuses - Mounted on an aluminum profile stand Space requirement Ø x H: 240 x 250 mm Weight: 17 kg Good condition A bowl feeder always consists of two essential components. 1) Sorting bowl, in which the parts are oriented 2) Drive unit, which generates vibrations in the sorting bowl via mechanical oscillations, thereby moving the parts.

Condition: used, GVW: 1.590 kg Kdedpfxoxxct Us Ag Aow Manesty – ACCELA COTA Coating machine Model 150 (45 inch) This high quality coating equipment, designed to cover a wide range of production batches from medium scale to large scale, has an unbeatable combination of a very efficient coating process coupled with a high rate of return on investment. Innovative science based developments in the four key areas of; tablet mixing, spraying, drying efficiency and control system technology, guarantee that the XLTMCota provides a very effective solution to obtaining a highly controlled process, ensuring the delivery of high quality end product. Interchangeable baffles to suit all processes A range of three baffles to suit different applications are offered. Oystar Manesty identified the product movement in the coating pan to be a key attribute in reaching optimal coating efficiency. Baffles can be easily removed and interchanged. Efficient CIP system to guarantee fast return to production In conjunction with our m-tecTM control system, Oystar Manesty provides a fully validatable Clean in Place (CIP) option. From the initial rinse through to compressed air cleaning of solution tubes, the XLTMCota Clean in Place (CIP) was designed to promote fast return to production by eliminating the need for manual cleaning. Simple and fast loading and unloading facility Tablets can be loaded with the front door closed or open using simple load chutes designed to suit different types of containers. Tablets are discharged by reversing the direction of the drum. This method has been proven to be extremely fast and gentle at the same for safe handling of the finished product. Weight : 1590 kg CoaterDimensions : H 2065 x W 1665 x D1475 Spray Guns : 3Working Volume : 170 LCompressed Air Consumption (5bar from Coater) : 7.9 Air Volume Range (m3/hr) : 1500 – 2500 Main HeaterTemperature Range (°C) : 10 – 85 Main Heater Steam Consumption ( kg/hr ) : 117 Sold with : Donaldson Torit – Dust collector DCE DF02 12R

Condition: new, Year of construction: 2025, Walk-behind Scrubber Dryer Cleancraft Model: SSM 551 Battery-powered Scrubber Dryer Item number: 7202060 Brand: Cleancraft DESCRIPTION Designed for high productivity, low operating costs, and very simple operation Polypropylene disc brush with 0.6 mm bristles included Efficient dirty water extraction: surface is immediately dry and safe after a single pass Adjustable dosing of cleaning solution Automatic squeegee release protects against damage in the event of accidental impact HEPA filter retains fine dust from the suctioned air, preventing release into the environment Automatic water and brush stop when the machine is not in use Mechanical operation of brush and squeegee via levers Configurable with various cleaning brushes and pads TECHNICAL DATA General Information Working width: 508 mm Theoretical productivity: 1,880 m²/h Speed range: 0 - 4 km/h Maximum incline: 2% Vibration exposure value: 0.56 m/s² Dimensions and Weights Length (product) approx.: 1,225 mm Width/Depth (product) approx.: 597 mm Ksdpfx Agsxw N Rws Aedw Height (product) approx.: 1,030 mm Net weight approx.: 81 kg Brushes Brush diameter: 508 mm Brush speed: 140 rpm Brush pressure: 21 kg Surface pressure brushes: 150 g/cm² Electrical Data Rated voltage: 24 V Total power: 922 W Brush motor power: 500 W Vacuum pump power: 422 W Power supply: Battery Battery type: 2 x 12 V 75 Ah Maximum battery runtime: 150 min Battery charging time: 5 h Protection class: IPX3 Sound Emission Sound pressure level Lp: 64.2 dB(A) Sound power level Lw: 78.8 dB(A) Vacuum System Working width suction: 703 mm Vacuum: 180 mbar Product Information EU 2023/2854 Type of generated data: Usage data Format of generated data: Common machine-readable formats e.g. JSON Data volume: Up to 5 MB Continuous real-time data generation: Yes SCOPE OF DELIVERY 2 x Gel Batteries 12V 75Ah Battery charger Disc brush PP 0.6 mm EQUIPMENT Equipment 2-tank system Fresh water tank: 34 l Dirty water tank: 36 l Dirty water extraction: can be switched off Squeegee: rear-mounted Automatic water and brush stop Battery charge indicator Hour meter Location: 54634 Bitburg - Immediately available -

Condition: new, sheet length: 2100sheet thickness: 6,0total power requirements: 11weight approx.: 5500messurements (LxWxH): 3110x2195x1770 Our strong brand KK Kletzer                    TAFELSCHER Vibration cut version Model SWT has everything you need for cutting.  We have also raised the standard in the vibration cutting design and deliver ours as well  Plate shears with automatic cutting adjustment via the touchscreens Control ELGO P40T without surcharge.  NC slotted table shears KKI Technological advantages Fast and precise cuts Stable,  durable frame construction Automatic kerf adjustment Easy handling Low maintenance costs High safety standard Use of components from well-known manufacturers Low unit costs   Technical specifications:  Sheet thickness: 6 mm  Cutting length: 3.100 mm Cutting angle: 1,5°  number of hold-downs 15 Backgauge: 1,000 mm via CNC  Motor power: 11 kW  Strokes per minute 15 Projection: 50 mm  Length: 4110 mm  Width: 2195 mm  Height: 1770 mm  Weight: 7000 kg  • Stable swing cut design Cutting gap adjustment via the control - backgauge - kerf - Cutting length  Ksdefhlbdspfx Ag Asdw • Ball screws for the back gauge • balls in the table  • Side stop 1,500 mm • 2 pcs. Support arms 1.000 mm  • Cut line lighting • Foldable up to 1,000 mm finger protection  Option:  pneumatic sheet support, EURO 3.900, -  We have many references!

Condition: new, Year of construction: 2025, neu 2025 070126 Jänner 2026, Zwischenverk Türkei 48500 € 926.35 € Kdodswwwtijpfx Ag Ajw 60 to 3.5 mm 500 mm 700 mm 190 mm 1 - 100 mm 65 1/min 4 70 mm 45 mm 260 mm 365 mm 5,5 kW 1250 mm 1350 mm 2400 mm 3500 kg welded steel construction body frame 4-fold ram guide pneumatic clutch-brake combination fully closed gearbox working in oil bath photocell light barriers mechanical overload protection two hand and foot pedal control manual adjustable stroke automatic central lubrication according to CE rules OPTIONS: vibrations pads bolster plate picture incl. optional available bolster plate

Condition: good (used), Vibratory finishing machine, vibratory finishing system, vibratory finishing machine, vibratory finishing rotary vibrator, vibratory finishing system, continuous vibrator, vibratory conveyor, vibratory feeder, conveyor trough, spiral conveyor -Work container: elastically mounted Kdsdpfeimttvjx Ag Asw -Total volume: 60 liters -Outer diameter: 730 mm -Work basin width: 250 mm -Work basin height: 250 mm -Extended container length: 1500 mm -Machine for: Deburring, polishing, edge rounding -Dimensions: 800/800/H1150 mm -Weight: 460 kg

Condition: used, GEA Courtoy R 090/18 rotary tablet press with electrical cabinet R090XT13 Number of positions / stations: 18 Punch type: EU D Max. compression force: 100 kN Max. precompression force: 10 kN Production speed: 15,900 – 79,200 tablets / hour. Ø Max. tablet diameter: 25 mm Outer diameter of dies: 56 mm Die height: 23.81 mm Kdedpoxxctnjfx Ag Aew Ø Punch body diameter: 25.35 mm Height of the press: 1955 mm Net weight: 1800 Kg Full technical file. Feeding device / Loading hopper / Discharge chute / Allen Bradley control system. Small size. Equipment in excellent condition and low operating hours.

Condition: new, sheet length: 4100sheet thickness: 13,0total power requirements: 30weight approx.: 15500messurements (LxWxH): 4120x2240x2235 Our strong brand KK Kletzer                    TAFELSCHER Vibration cut version Model SWT has everything you need for cutting.  We have also raised the standard in the vibration cutting design and deliver ours as well  Plate shears with automatic cutting adjustment via the touchscreens Control ELGO P40T without surcharge.  NC slotted table shears KKI Technological advantages Fast and precise cuts Stable,  durable frame construction Automatic kerf adjustment Easy handling Low maintenance costs High safety standard Use of components from well-known manufacturers Low unit costs   Technical specifications:  Sheet thickness: 13 mm  Cutting length: 4,100 mm Kjdpfed Tm Rcex Ag Aedw Cutting angle: 2.3 °  number of hold-downs 19  Backgauge: 1,000 mm via CNC  Motor power: 30 kW  Strokes per minute 8  Projection: 50 mm  Length: 5120 mm  Width: 2240 mm  Height: 2235 mm  Weight: 15500 kg  • Stable swing cut design Cutting gap adjustment via the control - backgauge - kerf - Cutting length  • Ball screws for the back gauge • balls in the table  • Side stop 1,500 mm • 2 pcs. Support arms 1.000 mm  • Cut line lighting • Foldable up to 1,000 mm finger protection  Option:  pneumatic sheet support, EURO 4.900, -  We have many references!

Condition: new, Year of construction: 2025, neu 2025 070125 Jänner 2026, Zwischenverk Türkei 40200 € 767.82 € 40 to 2.5 mm 450 mm 650 mm 150 mm 1 - 80 mm 125 1/min 4 75 mm 40 mm 225 mm 300 mm 835 mm 4 kW 1350 mm 1370 mm 2330 mm 2100 kg welded steel construction body frame 4-fold ram guide pneumatic clutch-brake combination Kdodpfx Agewiqvze Aow photocell light barriers mechanical overload protection two hand and foot pedal control manual adjustable stroke manual central lubrication according to CE rules OPTION: Vibration pads € 192,-- Bolster plate € 830,--

Condition: used, Year of construction: 2004, Manufacturer: Ima Farmomac Model: F370 18VL 8C Ksdpsxxcthefx Ag Ajdw Year: 1987 frame – Machine refurbished by the manufacturer in 2004 with pharmaceutical qualification. Type : Monoblock bottle filling and crimping machine. Application: Glass and plastic syrup bottles with aluminium PP28 cap (Ø 28 mm-) Industrial sector: Pharmaceuticals and cosmetics Movement: continuous automatic Number of filling heads: 18 units Number of crimping heads: 8 units Volumetric pump: max. filling 1000 ml   Available sizes: 370 ml and 200 ml Capacity: 6000 vials/h in 370 ml Capacity: 7500 vials/h in 200 ml   NEM cap lifter Vibrating bowl Electrical cabinet Laminar flow cabinet Vessel/buffer tank before filling. Vial infeed conveyor with paddles Control box and power cabinet. Protective covers with safety devices. Available history and documentation   These elements can be the subject of a separate quotation. change of format, bottle sealing (screw caps, pressure caps, end caps, PFPs, etc.), etc.

Condition: new, sheet length: 3.200sheet thickness: 6,0total power requirements: 7,5weight approx.: 5.100messurements (LxWxH): 3.800 x 1.750 x 1.700 Our strong brand KK Kletzer                    Swing Beam Cutting Shear Vibration cut version Model SW has everything you need for cutting.  We have also raised the standard in the vibration cutting design and deliver ours as well  Plate shears with automatic cutting adjustment via the touchscreens Control ES21S without surcharge.  Technical specifications:  Sheet thickness: 6 mm  Cutting length: 3.100 mm Cutting angle: 1,5° Motor power: 7,5 kW  Strokes per minute 12 Length: 3.800 mm  Width: 1.750 mm  Height: 1.700 mm  Weight: 5.100 kg  • Stable swing cut design Cutting gap adjustment via the control - backgauge - kerf - Cutting length  • Ball screws for the back gauge • balls in the table We have many references! Kdjdpfxenwt A As Ag Aow

Year of construction: 2004, condition: used, Dimensions (LxBxH): 150 x 65 x 40 cm Manufacturer : Rotex Europe Model: 3242A AL/MS Year : 2004 Type : Rectangular gyratory screener Screen: 5 mm and 30 mm Overall dimensions: 2700 mm x 900 mm Unclogging ball Composite unit : Feed hopper Dimensions: Ø 1300 mm x 700 mm Vibrating conveyor Manufacturer: Scan-Vibro Kjdpfsxxcq Tex Ag Aedw Year of construction: 2005 Outlet diameter: Ø 200 mm Screw conveyor Manufacturer: Fjordvess Maskinfabrik A/S Type : B-200 Year of manufacture : 2005 Screw diameter : 200 mm Overall dimensions : 1500 mm x 650 mm x 400 mm,

Condition: new, sheet length: 3100sheet thickness: 6,0total power requirements: 11weight approx.: 7000messurements (LxWxH): 4110x2195x1770 Our strong brand KK Kletzer                    TAFELSCHER Vibration cut version Model SWT has everything you need for cutting.  We have also raised the standard in the vibration cutting design and deliver ours as well  Plate shears with automatic cutting adjustment via the touchscreens Control ELGO P40T without surcharge.  NC slotted table shears KKI Technological advantages Fast and precise cuts Stable,  durable frame construction Automatic kerf adjustment Easy handling Low maintenance costs High safety standard Use of components from well-known manufacturers Low unit costs   Technical specifications:  Sheet thickness: 6 mm  Cutting length: 3.100 mm Cutting angle: 1,5°  number of hold-downs 15 Backgauge: 1,000 mm via CNC  Motor power: 11 kW  Strokes per minute 15 Projection: 50 mm  Length: 4110 mm  Width: 2195 mm  Height: 1770 mm  Weight: 7000 kg  • Stable swing cut design Cutting gap adjustment via the control - backgauge - kerf - Cutting length  Kedsd Eqrnspfx Ag Aedw • Ball screws for the back gauge • balls in the table  • Side stop 1,500 mm • 2 pcs. Support arms 1.000 mm  • Cut line lighting • Foldable up to 1,000 mm finger protection  Option:  pneumatic sheet support, EURO 3.900, -  We have many references!

Condition: used, Year of construction: 2003, total width: 1,500 mm, total length: 4,420 mm, total height: 2,700 mm, Applicable material: Food Empty weight: 1.200 kg GVW: 1.200 kg Current frequency: 50 Hz Voltage: 380 Manufacturer: Gualapack Model: CHP 40/3 Year : 2003 Type : Doypack bag filler, sold with laminar flow. Ksdpfxoxxclqs Ag Aodw   > Video available on request.   Electrical supply : 380 V three-phase/50 Hz. with separate neutral and earth conductor. Pneumatic supply: Compressed air 6 to 7 bar (atm.). Filling capacity = max. 1500 ml Filling temperature: 90°C max. Sachet production: By automatic feeding system Cap feeding : By vibratory unit and cork feed chute. Packaging dimensions: Max. width 120 mm / Max. height 270 mm. Max output : 40 pieces / min   Operating principle Automatic loading of sachets onto the turntable. The filling date or use-by date is printed on the pouch (or other information). Filling station: 1) Suction of air from the sachet (using a vacuum pump) / 2) Filling of product, taking into account the capacity of the sachet / 3) Filling of the sachet with air or gas (nitrogen) if there is a risk of bacteriological problems with the product. Apply the cap to the sachet and pre-tighten the cap Final tightening of the cap to the prescribed torque. Check the position of the cap to see if it is correctly screwed on or if it is loose. The sachet is unloaded onto a belt conveyor for evacuation from the machine.   Overall dimensions : Width 150 cm Length 441.50 cm Height 270 cm Weight : 1200 Kg

Condition: new, More technical data on request Technical specifications: - The  machine frame built of high strength materials by electro  welding and  stress relieved prior to the machining in order to meet  tight  manufacturing tolerances for sensitive flanging process. - Upper and lower head holder slides on the main body structure for stiffness and lower vibration during flanging. - Both upper and lower head holders powered by hydraulic motors for vertical movement and clamps the head by hydraulic cylinders. - Knuckle roll is powered by radial piston by hydraulic motors for high speed of rotation and high torque. - Flanging roll is powered by three cylinders for vertical and horizontal direction and slides between two main bodies. - Both rolls are made of special chemical for long time corrosion resistance - Centralised greasing system. - Lower supporting rolls are powered by hydraulic cylinders to support the head during flanging. - Hydraulic system consist of radial piston pump, oil tank level gauge, filter with impurity signal and worldwide known brands. Kdjdpfxjd Ab U Uj Ag Aow         We have many references!

Condition: used, Year of construction: 2007, Manufacturer: Groninger Model: KFVG251 + DTE 1000 Year : 2007 Type : Filling, capping and crimping machine for sterile glass or plastic vials Application : Crimping bottles in sterile / aseptic environment Infeed turntable with deposit tray and push device Object detection station Tubular peristaltic pump: Flexicon Plunging filling heads: level filling Ksdpfx Aoxxclkeg Asdw Gassing station Capping station with feed hopper + vibrating bowls Crimping station: lateral crimping disc, on-the-fly cap pick-up, feed hopper + vibrating bowls Product exit / ejection Full technical documentation available. Sizes available : 4 / 6 / 15 / 30 / 50 / 60 / 120 / 250 ml Cap: ø 13 mm and Ø 20 mm

Condition: new, sheet length: 4100sheet thickness: 6,0total power requirements: 15weight approx.: 10200messurements (LxWxH): 4120x2195x1770   Kdedpfed Tm Rbox Ag Aew Our strong brand KKKletzer                    TAFELSCHER Vibration cut version Model SWT has everything you need for cutting.  We have also raised the standard in the vibration cutting design and deliver ours as well  Plate shears with automatic cutting adjustment via the touchscreens Control ELGO P40T without surcharge.  NC slotted table shears KKI Technological advantages Fast and precise cuts Stable,  durable frame construction Automatic kerf adjustment Easy handling Low maintenance costs High safety standard Use of components from well-known manufacturers Low unit costs   Technical specifications:  Sheet thickness: 6 mm  Cutting length: 4.100 mm Cutting angle: 1,5°  number of hold-downs 19 Backgauge: 1,000 mm via CNC  Motor power: 15 kW  Strokes per minute 12 Projection: 50 mm  Length: 5120 mm  Width: 2195 mm  Height: 1770 mm  Weight: 10200 kg  • Stable swing cut design Cutting gap adjustment via the control - backgauge - kerf - Cutting length  • Ball screws for the back gauge • balls in the table  • Side stop 1,500 mm • 2 pcs. Support arms 1.000 mm  • Cut line lighting • Foldable up to 1,000 mm finger protection  Option:  pneumatic sheet support, EURO 4.900, -  We have many references!

Condition: used, Year of construction: 2003, total length: 1,500 mm, total height: 1,400 mm, Applicable material: Food Year : 2003 Type: hot or cold product filling line for pots and bottles Application : Suitable for viscous products such as creams in the cosmetics / pharmaceutical or other industries   Type: Automatic linear filler Manufacturer: Tirelli Model : CHICO 2P Year : 2003 Number of heads : 4 units Volumetric filling technology with 2 metering pistons Jacketed 25 L hopper + piping Temperature controller Pneumatic bottle-lock centring device PLC controls and configuration Linear conveyor with pallet chain SISE 95E6E 13 DC60 temperature controller (3.5 KW / 90°C / Water) – Year 2014   Type : Automatic capping machine with star wheel Type of cap: screw cap Manufacturer: Tirelli Model : RO Year : 2003 Automatic cap feeder : vibrating bowl + giraffe conveyor Presence / jamming / dispensing sensors Pick and place   Type: Automatic jar / bottle unscrambler Manufacturer: Romaco Bosspack Model: MS150 Kodpfoxxckyox Ag Aedw Year : 2003 Output : up to 150 jars / min Product dimensions : Diameter: 30 mm min / 100 mm max Height : 50 mm min / 200 mm max Width: 30 mm min / 100 mm max Length: 30 mm min / 100 mm max Machine dimensions : Length: 150 cm Depth: 340 cm Height: 140 cm

Condition: new, sheet length: 3100sheet thickness: 13,0total power requirements: 30weight approx.: 12 tomessurements (LxWxH): 39502240x2100 Our strong brand KK Kletzer                    TAFELSCHER Vibration cut version Model SWT has everything you need for cutting.  We have also raised the standard in the vibration cutting design and deliver ours as well  Plate shears with automatic cutting adjustment via the touchscreens Control ELGO P40T without surcharge.  NC slotted table shears KKI Technological advantages Fast and precise cuts Stable,  durable frame construction Automatic kerf adjustment Easy handling Low maintenance costs Kdsdpfx Agsfnqi Tj Asw High safety standard Use of components from well-known manufacturers Low unit costs   Technical specifications:  Sheet thickness: 13 mm  Cutting length: 4,100 mm Cutting angle: 2.3 °  number of hold-downs 19  Backgauge: 1,000 mm via CNC  Motor power: 30 kW  Strokes per minute 8  Projection: 50 mm  Length: 5120 mm  Width: 2240 mm  Height: 2235 mm  Weight: 15500 kg  • Stable swing cut design Cutting gap adjustment via the control - backgauge - kerf - Cutting length  • Ball screws for the back gauge • balls in the table  • Side stop 1,500 mm • 2 pcs. Support arms 1.000 mm  • Cut line lighting • Foldable up to 1,000 mm finger protection  Option:  pneumatic sheet support, EURO 4.900, -  We have many references!

Condition: new, pressure: 150Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 15weight approx.: 9500messurements (LxWxH): 1800 x 1500 x 2600Stroke/min: 50-90 Machine Technical SpecificationsCE Compliance: The machine and all equipment are manufactured in accordance with CE regulations Light Curtains: SICK or PILZ PLC Control: Siemens S7-1200 Stroke Adjustment: Directly via the touchscreen interface Balancing System: Integrated Stroke Speed Adjustment: Via Mitsubishi frequency inverter Machine Frame: Full steel construction Guidance System: Inner and outer eccentric guides Crankshaft: Made of hardened 4140 steel Clutch & Brake: Pneumatic combination system Safety Valve: Dual-way safety valve Safety PLC: SICK or PILZ Operation Modes: Two-hand operation and foot pedal available Lubrication: Automatic centralized lubrication system Overload Protection: Hydraulic overload system Safety Guarding: Protective enclosure around the working area External I/O: 8-pin I/O ports on PLC (for external connections and signal exchange) Anti-Vibration: Rubber dampers under the machine feet (1 pair – 4 pieces) Power Supply: 400 V / 50 Hz Required Fuse: 32 A Control Panel: 19 Siemens touchscreen ? Main Technical DataOperation Modes: Inch / Single stroke / Continuous stroke Press Force: 150 tons Table Dimensions: 750 × 1000 mm (fixed table) Stroke Length: 10–125 mm (automatically adjustable via PLC) Ram Dimensions: 500 × 800 mm (Ø55mm pin receptacle & T-slots customized to customer needs) Stroke Rate: 50–90 strokes per minute Main Motor: 15kW (1,400 rpm) Throat Depth: 325 mm Shut Height: 475 mm (adjustable down to 295 mm) Ram Bore Diameter: 50 mm Kdodpfx Agetqwtde Aow Machine Dimensions:Length: 1,800 mm Width: 1,500 mm Height: 2,600 mm Machine Weight: approx. 9,500 kg Ram Adjustment: 40 mm (automatic adjustment)