Used Vertical Sachet Machine for sale (65,257)

Condition: ready for operation (used), Year of construction: 2012, Available immediately from Swiss toolmaking facility (CH): Vertical 5-Axis Simultaneous Machining Center Unitech Model: HSM – IC 5-Axis Year of manufacture: 2012 Heidenhain iTNC 530 Table size: 1100 x 600 mm Travel (X/Y/Z): 1080/610/810 mm Rotary table diameter: 600 mm Spindle speeds up to 15,000 rpm Feed rates up to 30,000 mm/min Table load capacity: 500 kg Tool holder: BT 40 Magazine: 40 stations Through-spindle coolant (IKZ) 60 bar Chip conveyor Compressed air through the spindle Spindle hours: 8,200 / spindle will undergo a complete overhaul in 2025, after which it will be reset to 0 hours Nkjdpfoyayk Usx Ah Hst Glass scales on X and Y axis Zero-point measuring system in rotary table Infrared measuring system Zero-point clamping system integrated in rotary table with 10 clamping pots, manufacturer: Schunk Weight: 10 tons Price: EUR 17,500.— plus VAT, ex location

Condition: ready for operation (used), Year of construction: 2001, Immediately available ex location: Vertical Machining Center Sigma Type Zenit 3 Year of manufacture 2001 Heidenhain TNC 426 – M Table 1200 x 500 mm Travel X/Y/Z 1000/500/550 mm SK 40 Tool magazine for 50 tools Spindle speeds up to 12,000 rpm Through-spindle coolant Weight 6.5 tonnes Priced at EUR 7,000,-- plus VAT ex location. Nkedpfxsyaykus Ah Hst

Condition: ready for operation (used), Year of construction: 2000, Immediately available from site: CNC Vertical Machining Center Mori Seiki Model MV 653/50 Year of manufacture: 2000 CNC control: Fanuc MSG 501 Table: 1700 x 660 mm Table load capacity: 2 t Travel (X/Y/Z): 1530 / 660/ 650 mm Distance spindle – table: 200 – 850 mm Distance spindle – column: 690 mm Taper: SK 50 Spindle speeds up to 6,000 rpm Main spindle drive: 26/22 kW Tool changer: 40 positions Through-spindle coolant (IKZ) Feeds: 1 – 10,000 mm/min Rapid traverse: 24 m/min Creep feed: 0 – 1,260 mm/min Nedpfoyaykbox Ah Hjkt Total connected load: 52.5 kVA Chip conveyor Weight: 16 t Price: EUR 6,000.00 plus VAT, ex site

Condition: good (used), Year of construction: 2016, operating hours: 27,412 h, functionality: fully functional, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 680 mm, controller manufacturer: Siemens, controller model: 840D sl, table width: 400 mm, table height: 30 mm, table length: 500 mm, table load: 500 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,956 h, coolant supply: 80 bar, spindle motor power: 32,400 W, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a Starrag HEC 400 F 4-axis machining center, which was fully inspected and overhauled at the Starrag factory in 2022. All relevant components were checked and replaced or adjusted as needed during this process. Since its installation in 2022, the machine has been in operation at our facility and is currently under power for ongoing production. It is in well-maintained technical condition and has been serviced regularly. Technical Highlights • Starrag HEC 400 F – 17211, 4-axis machining center for milling / drilling / turning • Control: Siemens Sinumerik 840 D solution Line with NCU710 and PLC integration • Spindle: HSK-A63 motor spindle, speed range 50 – 18,000 rpm, torque 130 Nm (25% duty cycle), power 32.4 kW / 24 kW (100% duty cycle) • Factory inspection in Chemnitz (2022): all assemblies checked, adjusted, and renewed as needed • Direct-drive NC rotary table, 80 rpm, 400 Nm drive torque, 3,000 Nm tangential torque • Siemens spindle diagnostics & remote diagnostics (TeamViewer) • Energy-efficient system with regeneration and standby mode for energy savings Working Area & Dimensions • Travels (X/Y/Z): 650 / 650 / 680 mm • Pallet size: 400 × 500 mm with 57 × M12 threaded holes • Max. workpiece height: 850 mm • Max. load per pallet: 500 kg • Pallet changer: 2 pallets – automatic, changeover time approx. 8 s • Tool magazine: 60 tool positions (chain magazine), chip-to-chip time 3 – 4 s • Chip conveyor: scraper belt conveyor with vacuum gap sieve, discharge height 1,050 mm • Machine dimensions (L × W × H): approx. 5,150 × 2,800 × 3,025 mm • Machine weight: approx. 11,500 kg • Noise emission: ≤ 80 dB(A) according to EN ISO 3744 Additional Equipment • 6-channel clamping hydraulics (90 bar) at setup and working positions • Increased spindle torque (130 Nm) for high-performance cutting • Torque support with axial supports • Coolant system: connection to central supply incl. return and temperature compensation • Increased coolant pressure to 80 bar through spindle center • Optical measuring probe Renishaw OMP60 incl. Siemens measuring cycles • Tool breakage detection (mechanical, parallel to main time) • Pallet sequence operation + crane loading/unloading (software) • Signal lamp (4-color) for operating status Nkjdpfx Ahox H Idks Hjt • Work area/machine equipment: shower nozzle, rinsing pistol, vortex nozzle, extraction interface, foot switch blow nozzle • Documentation: fully digital (PDF) Operating Hours / Run Times • Power-on hours: approx. 27,412 h (as of Oct 2025). The counter runs as soon as the machine is switched on – including during setup, maintenance, or idle times. • Total spindle running time: 9,956 h Special Features • OPTIONAL: With perfect post-processor and CAD/CAM software TOP Solid (at extra cost) • Under power – demonstration possible at any time • Directly from production – not a dealer sale • Complete technical documentation available • Support with dismantling, loading and transport available (at extra cost) The tool holders and vise visible in the photos are not included in the offer, but can be purchased separately if desired. Price: €135,000 net, negotiable for quick completion. All information has been provided to the best of our knowledge and belief. Subject to changes, errors, and prior sale.

Condition: used, Year of construction: 2005, 1 unit 3-axis machining center, make Bridgeport model VMC 760 XP³, year 2005, serial number 310B107, machine weight 6,780 kg, control Heidenhain iTNC 530, recorded operating hours 13,983, control on time 14,538 h, program run time 5,923 h, milling table approx. 1,000x600 mm, 5 T-slots, XYZ travels approx. 760x610x610 mm, chip conveyor, 30-position tool changer, internal no. 10 Nsdpfx Ahsyaw Nho Hokt

Condition: used, Year of construction: 2012, 1 unit universal milling machine, manufacturer Kunzmann, model B 1000 - 810 Z Vario, year 2012, serial no. 101166, machine weight 10,100 kg, XYZ travel – 1,020 x 620 x 810 mm, control unit Heidenhain iTNC 530, recorded operating hours 26,337, program run time 22 h, spindle run time 21 h, Heidenhain HR 410 electronic handwheel, TS 640 probe, Renishaw laser control system, milling table approx. 1,200 x 600 mm, 6 T-slots, 32-position ATC, chip conveyor by Mayfran BA 800/1000, band filter system, internal no. 11 Category: Machinery and Technical Equipment Sale subject to reservation: The sale of this item is subject to reservation and independent of the achievement of the minimum price. A decision regarding the acceptance of the bid will be made as soon as possible. Njdpfx Ahoyaw Iwo Hjkt

Condition: good (used), Year of construction: 2001, Data will follow.... Nkjdpjx Tgznofx Ah Het

Condition: excellent (used), Year of construction: 2012, DMG DMC 1035 ECO Machining Center DMG DMC 1035 ECO with Siemens Sinumerik 810 D powerline control system, year of manufacture 2011, in excellent original condition. The machine comes from the training workshop of a renowned German mechanical engineering company. CE-compliant!! Nodpfsyat Tvex Ah Hekt Technical data: X-axis travel: 1,035 mm y-axis travel: 560 mm z-axis travel: 510 mm CNC control: Siemens Sinumerik 810 D powerline Table size: 1200 x 560 mm Maximum table load: 1000 kg Spindle taper: SK 40 Spindle speed: 10,000 rpm Spindle motor power: 13 kW Feed rate steplessly adjustable: 20,000 mm/min Rapid traverse: 25 m/min Tool changer capacity: 20 positions Coolant system with through-spindle coolant (IKZ): 20 bar Operating voltage: 400 V Total power requirement: 17 kVA Machine weight: approx. 4.1 t Dimensions (L x W x H): approx. 2.55 x 2.30 x 2.25 m Chip conveyor: 3.90 x 0.95 x 1.60 m Equipment: - Control unit: Siemens Sinumerik 810 D powerline - Electronic handwheel - Chip conveyor - Through-spindle coolant (IKZ) 20 bar About the machine: Offered here is a DMG DMC 1035 V machining center equipped with a Siemens Sinumerik 810 D powerline control. This machining center is in excellent original condition and was only used for training purposes in a facility. The control system is very user-friendly. The guideways are lubricated regularly via a central lubrication system. The DMG DMC 1035 V has been both mechanically and electrically tested by us. Take the opportunity to view and test the DMG DMC 1035 V under power at our facility. You will find further milling machines from well-known manufacturers on our website.

Condition: good (used), Year of construction: 2005, operating hours: 32,099 h, functionality: fully functional, travel distance X-axis: 625 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, total length: 5,800 mm, total width: 4,800 mm, table width: 400 mm, table length: 500 mm, overall weight: 12,800 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 3,648 h, coolant supply: 50 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale is a 4-axis horizontal machining center from the manufacturer Starrag. The machine is used, has been regularly maintained, and is in fully functional condition. Machine Details - Manufacturer: Starrag - Model: CWK 400D - Year of manufacture: 2005 - Operating hours: 32,099 - Control: Siemens Sinumerik 840D - Machine weight: 12,800 kg - Footprint (LxW): 5.8 x 4.8 m Technical Data Travel paths: - X = 625 mm - Y = 650 mm - Z = 650 mm - B axis: 360° (0.001° increments) / 100 rpm - Spindle speed: 50 – 10,000 rpm (stepless) - Motor power: 24 kW / 37 kW - Torque: 250 Nm / 350 Nm Table & Pallets - 2 pallets, each 500 x 400 mm - T-slots to DIN 55201 - Load capacity: 400 kg - Pallet changer included (changeover time 8 s / 5 s) Tool Data - Interface: DIN 69893-HSK-A63 - Chain magazine with 60 tool positions - Tool diameter: 80 mm (up to 160 mm with adjacent pockets free) - Max. tool length: 350 mm - Max. tool weight: 10 kg - Total tool weight: 200 kg Equipment & Extras - Coolant system (emulsion, internal & external supply, approx. 1100 L) - Knoll coolant unit with fleece filter (30, 40, 50 bar) - Measuring probe: Renishaw - Tool breakage monitoring in magazine Nkedpox Ib T Ijfx Ah Hst - Chip conveyor - Flood wash, paper band filter, cleaning gun at setup station - Fully enclosed working area to UVV safety standards - Pallet sequence mode - Network connectivity, Ethernet interface - Technical documentation & layout plan included Maintenance - Carried out regularly - Machine is fully functional All details have been prepared to the best of our knowledge and belief. Subject to changes, errors, and prior sale.

Condition: good (used), Year of construction: 2000, operating hours: 48,804 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, controller manufacturer: Siemens, controller model: Sinumerik 840D, total length: 7,000 mm, total width: 5,000 mm, table width: 400 mm, table length: 500 mm, spindle speed (max.): 8,000 rpm, operating hours of spindle: 23,574 h, coolant supply: 50 bar, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Very well-maintained 4-axis machining center from precision manufacturing. The machine has been serviced regularly, is immediately ready for operation, and comes with a pallet changer and extensive accessories. Ideally suited for tool and mold making or series production. Njdsx Icyvepfx Ah Hokt Technical Specifications -Travel distances: X 600 mm / Y 560 mm / Z 560 mm -B-axis: 360° x 0.001° (60 rpm) -Spindle speed: 0 – 8000 rpm (stepless) -Control: Siemens Sinumerik 840D -Table size: 6 pallets, each 500 x 400 mm -Table load: 350 kg -Working feed: 1 – 60,000 mm/min -Rapid traverse: 60 m/min Tool & Magazine -Tool holder: DIN 69871-SK40 -Chain magazine with 90 positions -Max. tool diameter: 80 mm -Max. tool length: 350 mm -Max. tool weight: 10 kg -Max. total magazine weight: 450 kg -Tool change time: 5 sec -Pallet change time: 6 sec Machine Requirements & Dimensions -Motor power: 13 kW / 20 kW -Torque: 124 / 191 Nm -Total power requirement: 20 kW -Machine weight: approx. 16,000 kg -Required floor space (LxW): 7 x 5 m Equipment & Accessories -Coolant system approx. 1100 L (internal & external) -Knoll cooling unit with drum filter (30/40/50 bar via M-command) -Chip conveyor -Tool measurement: Renishaw probe -Tool breakage detection in the machining area -Pallet storage (4 positions) -Pallet sequence operation -Enclosed work area in accordance with UVV -Network capability -Technical documentation & installation layout available Components Renewed -Hydraulic system motor & pump replaced -Some hydraulic and pneumatic hoses replaced -Control cabinet LT module exchanged -Drum of Knoll system replaced Operating Hours / Run Times - Power-on hours approx. 48,804 h (counter runs when the machine is switched on, including during setup, maintenance, or idle times) - Spindle run time total 23,574 h Special Features - Machine live, immediately ready for use - Inspection possible any time by appointment - No dealer sale – machine comes directly from production - Technically inspected, no known defects - Assistance with disassembly, loading, and transport possible (for an additional charge) All information has been provided to the best of our knowledge and belief. Subject to alterations, errors, and prior sale.

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 740 mm, workpiece diameter (max.): 500 mm, workpiece weight (max.): 700 kg, total height: 2,813 mm, total length: 5,985 mm, total width: 3,056 mm, table width: 500 mm, table length: 500 mm, rotational speed (min.): 18,000 rpm, rotational speed (max.): 18,000 rpm, overall weight: 11,000 kg, spindle speed (min.): 18,000 rpm, Equipment: chip conveyor, Machine designation: Machining Centre Manufacturer: Mazak Model: HCN 5000-II Year: 2008 Technical details: X-axis travel: 730 mm Y-axis travel: 730 mm Z-axis travel: 740 mm Controller manufacturer: Mazatrol Nedpfx Aeyargbsh Hokt Controller model: Matrix Nexus Max. workpiece weight: 700 kg Overall height: 2,813 mm Overall length: 5,985 mm Overall width: 3,056 mm Table width: 500 mm Table length: 500 mm Total weight: 11,000 kg Max. spindle speed: 18,000 rpm Mazak HC Nexus 5000-II CNC horizontal machining centre Mazatrol Matrix CNC control Pallet table dimensions: 500 x 500 mm Number of pallets: 2 Table load capacity: 700 kg X-Y-Z axes travel: 730 x 730 x 740 mm Table indexing: 0.001° Spindle taper: DIN 69871A-40 Spindle speed: 18,000 rpm Spindle motor: 35-26 kW Tool magazine capacity: 80 For any questions regarding the machine or to arrange a viewing appointment, please contact us by phone or email.

Condition: used, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, Machine parameters: Travels in X, Y, Z axes: 1270 x 660 x 610 mm Table clamping area: 1500 x 660 mm Description: The machine is in good technical condition. Testing is possible by prior arrangement. Supported systems: MAX4 with WinMax v8, control language completely in Czech. 3D simulation: Yes. Programming type: Dialog and NC. TABLE Table dimensions: 1,500 x 660 mm T-slots: 6 x 18 mm Maximum table load: 1,350 kg Distance from spindle nose to table: 150 - 760 mm TRAVELS X axis: 1,270 mm Y axis: 660 mm Z axis: 610 mm Nsdoyarahepfx Ah Hskt A axis: 360 SPINDLE Maximum spindle speed: 12,000 rpm Spindle power: 18 kW Torque: 237 Nm Spindle taper: SK 40 TOOL MAGAZINE Number of tools: 40 Max. tool diameter: 75 / 125 mm Max. tool weight: 7 kg FEED Rapid traverse X/Y/Z: 30 / 30 / 20 m/min Working feed X/Y/Z: 15 m/min ADDITIONAL MACHINE DATA Dimensions (W x D x H): 3,250 x 2,220 x 2,950 mm Weight: 9,400 kg

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1177415, feed length X-axis: 1,300 mm, feed length Y-axis: 630 mm, feed length Z-axis: 650 mm, total height: 2,200 mm, total length: 3,500 mm, total width: 2,500 mm, overall weight: 8,000 kg, type of input current: three-phase, compressed air connection: 8 bar, nominal power: 32 kW (43.51 HP), 5-axis (3+2) CNC milling center, model VF5TR. The machine is in very good condition. It has been used very little, maximum one shift per day. Nodeyaq Tmjpfx Ah Hskt

Condition: used, Year of construction: 1992, travel distance X-axis: 1,800 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 800 mm, controller manufacturer: UniPro NC 80 C, total height: 3,450 mm, total length: 6,100 mm, total width: 3,600 mm, table width: 710 mm, table length: 2,100 mm, table load: 800 kg, rotational speed (min.): 45 rpm, rotational speed (max.): 2,000 rpm, overall weight: 1,000 kg, spindle motor power: 26,000 W, spindle nose: SK 50, number of slots in tool magazine: 24, CNC Milling Machine, Tilting Head horizontal/vertical, Control UniPro NC 80 C, Travel X/Y/Z 1800/710/800 mm, Spindle speed 45-2000 rpm, Motor 26 KW, tool system ISO 50, Table size 710x2100 mm, table load max. 800 kg, tool changer 24 Pos., dimension 610x360x345 cm, weight ca. 10'000 kg; with chip conveyor, band filter unit, tool holders, YOP 1992 Nkjdpjyaq D Ejfx Ah Hot

Condition: used, Year of construction: 1996, Saeilo Contur 1000, year of manufacture 1996, Heidenhain TNC 407 control, travels X/Y/Z 1016/610/508 mm, 40-position tool changer, SK 40, spindle speed up to 8,000 rpm, 2-speed gearbox, table size 1080 x 580 mm, 3-jaw chuck Ø 250 mm with jaws, 3-jaw chuck Ø 310 mm with jaws, machine weight 5,800 kg. Njdpfx Aheyaqtys Hskt

Condition: good (used), Year of construction: 2014, Spinner MCV 1000, year of manufacture 2014, Heidenhain TNC 620 control, travel X/Y/Z 1016/610/508 mm, 32-position tool changer, SK 40 spindle taper, prepared for internal coolant, table size 1200 x 500 mm, max. table load 800 kg, spindle speed up to 10,000 rpm, SK 40 spindle taper, chip conveyor, 4-jaw chuck Ø 250 mm with jaws, 3-jaw chuck Ø 315 mm with jaws. Nsdpfxsyaqn De Ah Hskt

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, spindle speed (min.): 16,000 rpm, 4 pcs CNC Brother model S500X1/S700X1. Year of manufacture: 2012, 2013 and 2014. Nkedpjyap R Dsfx Ah Hst

Condition: excellent (used), Year of construction: 2026, For sale: 5 Brother CNC machines, model TC-S2A. Very good condition. Nkjdpfxsyap Ivs Ah Het

Condition: excellent (used), Year of construction: 2008, For sale: CNC BROTHER in very good working condition. Nkodpfx Aheyapyle Het

Condition: used, Year of construction: 2014, swing diameter 210 mm turning length 210 mm weight of the machine ca. 13 t Nkodpfx Asyan Rijh Hst Feed diameter: 160 mm Workpiece diameter: max. 63 mm Workpiece length: max. 400 mm Workpiece weight: max. 10 kg Travel distances: X-axis: 340 mm Z-axis: 625 mm Main spindle power: 40%/100%, 34/26.5 kW Torque 40%/100%, 144/112 Nm Speed: max. 6000 rpm Turret tool positions 2 x 11 (1 gripper) Rapid traverse speed X/Z: 30/30 m/min Spindle size: KK5 Circular diameter: max. 210 mm Workpiece diameter: max. 63/100 mm Tailstock pin: MK3, 120 N/bar Stroke: 5 mm Operating voltage: 400V Control voltage DC: 24V Control voltage AC: 230V Frequency: 50 Hz Electrical equipment: VDE 0113

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 1069100, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, - Year of manufacture: 07/2008 Njdpfxexp N Hps Ah Hokt - 1st owner, from own use - Fully functional, powered on, ready for demonstration - Travel distances: 1270x508x635 mm - SK-40 spindle with 10,000 rpm, 14.9 kW, dual drive (Y-star) - Tool changer with 24+1 magazine positions - Rapid traverse 30.5 m/min and max. feed rate 21 m/min - Additional coolant filtration system - BT 40 option for SMTC40-0 - Wireless measuring and table probing system - Coolant through spindle 20.6 bar - Spiral chip conveyor - Serial number: 1069100 Net price, unloaded, ex location Luckenwalde (Germany), without transport.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 175849, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 840 mm, controller model: PC Fusion 640 M, total height: 4,450 mm, total length: 3,300 mm, total width: 2,900 mm, overall weight: 11,500 kg, spindle speed (max.): 12,000 rpm, 3-Axis Machining Center MAZAK - VTC 300C-II Manufacturer: MAZAK Model: VTC 300C-II Control: PC Fusion 640M Year of manufacture: 2005 Internal coolant supply (IKZ): 15 bar Table length: 2000 mm Table width: 760 mm Feed rate X-axis: 36,000 mm/min Feed rate Y-axis: 36,000 mm/min Feed rate Z-axis: 36,000 mm/min Tool holder: SK 40 Spindle power: 15 kW Spindle speed: 12,000 rpm Tool changer: 30 positions Internal coolant: Yes Number of controlled axes: 3 Chip conveyor: Yes Cooling unit: Yes Length: 4450 mm Width: 3300 mm Height: 2900 mm Nedpfx Aheyanuho Hokt Can be inspected under power.

Condition: refurbished (used), Year of construction: 2005, operating hours: 14,923 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 305 mm, feed length X-axis: 762 mm, feed length Y-axis: 406 mm, feed length Z-axis: 305 mm, torque: 45 Nm, controller manufacturer: Haas, total height: 2,700 mm, total length: 2,200 mm, total width: 1,750 mm, table width: 267 mm, table length: 1,213 mm, rotational speed (max.): 6,000 rpm, overall weight: 1,315 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,600 W, spindle nose: CT40/ISO/BT40, number of spindles: 1, input voltage: 400 V, type of input current: three-phase, Three-axis vertical CNC milling machine Haas TM-1HE, numerically controlled, with a 6000 rpm spindle. The machine is being sold by Haas service technicians with 10 years of experience. The machining center has undergone a complete, comprehensive inspection; it has been refurbished and is ready for operation. The mill is equipped with a range of additional options: - Higher-speed spindle up to 6000 rpm - Rigid tapping - Rotation & scaling - M19 spindle orientation - Macro programming - HSM (High Speed Machining) - IPS (Intuitive Programming System) - Possibility to activate 4th axis after adding servo amplifier and wiring; can be sold separately (fourth axis option) - Air coolant system Machine Information: - Machine type: Three-axis vertical milling machine Haas TM-1 - Serial number: 41246 - Manufacturing date: 04/05 - Spindle speed: 6000 rpm - X-axis travel: 762 mm - Y-axis travel: 406 mm - Z-axis travel: 305 mm Nkodpfx Ajyanlaeh Het - Minimum spindle-to-table distance: 102 mm - Maximum spindle-to-table distance: 507 mm - Table size: 1213 × 267 mm - T-slots: 3 slots, 16 mm wide - Overall dimensions (W × D × H): 220 × 175 × 270 cm - Weight: 1315 kg - Spindle motor power: 5.6 kW - Maximum torque: 45 Nm - Spindle taper: CT40 / ISO / BT40 - Voltage: 366/425 V - Phase: 3 - Full load current: 13 A - Frequency: 50/60 Hz - Largest load current: 16 A The machine has undergone a full, comprehensive inspection. All of the following components have been checked and verified: - Ballscrews - Linear guides and ways - Lubrication system - Spindle assembly - Spindle motor - Encoder - Vector drive - Servo amplifiers - I/O board - Processor board - All electrical cabinet components - Axis drives - Tool change system - CNC controller - Additional subsystems and components The machine is fully refurbished and ready for immediate operation.

Condition: like new (used), Year of construction: 2022, operating hours: 25,126 h, functionality: fully functional, machine/vehicle number: 16146-159, Make: Röders Model: RPX 501 Year: 2022 Serial no.: 16146-159 Machine type: Gantry machining center / HSC high-speed milling machine, incl. cooling unit Axes: 3-axis Spindle / Tool interface: • Tool holder: HSK E32 (ISO) • Max. tool diameter: Ø 10 mm • Spindle speed: up to 60,000 rpm Worktable: • Table size: 554 x 450 mm • T-slots: 14 mm • T-slot pitch: 50 mm Workpiece capacity: • Max. workpiece height: 500 mm • Max. workpiece weight: 400 kg Travels: • X-axis: 600 mm • Y-axis: 500 mm Nksdpfxsyanfte Ah Het • Z-axis: 300 mm Feed rates: • 0–60,000 mm/min Tool changer: • 35-position automatic tool changer Features / Equipment: • Erowa ER-016841 UPC clamping chuck • Chip separator Hours: • Total hours (read): 25,126 h • Cutting/milling time: 14,907 h Weight: 6,500 kg Electrical: • 400 V • 32 A Overall dimensions: 2,800 x 2,450 x 2,520 mm

Condition: like new (used), Year of construction: 2024, operating hours: 13,236 h, functionality: fully functional, machine/vehicle number: 16324-201, Make: Röders Model: RPX 501 Year: 2024 Serial no.: 16324-201 Machine type: Gantry machining center / HSC high-speed milling machine, incl. cooling unit Axes: 3-axis Spindle / Tool interface: • Tool holder: HSK E32 (ISO) • Max. tool diameter: Ø 10 mm Nsdsyancropfx Ah Hokt • Spindle speed: up to 60,000 rpm Worktable: • Table size: 554 x 450 mm • T-slots: 14 mm • T-slot pitch: 50 mm Workpiece capacity: • Max. workpiece height: 500 mm • Max. workpiece weight: 400 kg Travels: • X-axis: 600 mm • Y-axis: 500 mm • Z-axis: 300 mm Tool changer: • 35-position automatic tool changer Features / Equipment: • Erowa ER-139500 UPC 2.0 clamping chuck, size 320 x 300 mm • Chip separator Hours: • Total hours (read): 13,236 h • Cutting/milling time: 7,557 h Weight: 6,500 kg Electrical: 400 V / 32 A Overall dimensions: 2,800 x 2,450 x 2,520 mm