Used Vertical Press for sale (19,444)

Condition: used, Year of construction: 1981, pressure 080 t throat 345 mm stroke 8 - 112 mm Stroke rate 65 / min Rbedpsvuua Ajfx Ahvew Distance table/ram, max. stroke up, adjustment up 472 mm Table surface area 840 x 610 mm Hole in the table 280 / 315 mm Table height above floor 800 mm Passage to the back 500 mm Ram surface 650 x 400 mm Ram adjustment 70 mm Power capacity 7,5 kW Weight 6,8 t Dimensions (WxDxH) 1,2 x 1,95 x 3,05 m permitted for manual put-in according to the German Safety Regulations (UVV) with motor, pneumatic clutch-brake combination, hydraulic overload protection in ram, manual stroke adjustment, manual ram adjustment, pneumatic counterbalance in ram, motoric centralized lubrication, two-hand operation

Condition: used, Year of construction: 1991, pressure 63 t throat 325 mm stroke 560 mm dayligth 700 mm table surface area 640 x 640 mm die cushion capacity 25 t die cushion stroke 200 mm Rbodpfx Ahovuuacjvjw die cushion area 450 x 450 mm table height over floor 800 mm ram surface 560 x 560 mm oil volume 450 l total power requirement 15,0 kW weight of the machine ca. 7,0 t required space 1,2 x 2,0 x 3,1 m year of manufacture 1971 - overhaul 1991 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, two-hand operation press can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1991, pressure 100 t distance between columns 770 mm stroke 200 mm distance table/ram, stroke up 800 mm Table area 770 x 900 mm table height above floor 850 mm die cushion pressure in table 40 t die cushion stroke in table 200 mm die cushion area in table 600 x 600 mm side window 600 mm ram surface 770 x 900 mm speed down 62 mm/s speed up 350 mm/s working speed 17,5 mm/s oil volume 700 l power requirement 42,0 kW weight 9,0 t Dimensions (WxDxH) 2,6x 2,0 x 3,8 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, cutting impact cushioning, depth stop Rsdpjvut Ufefx Ahvebw No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F - Video at seller's site before dismantling available

Condition: used, Year of construction: 1957, pressure 100 t throat 315 mm stroke 30 - 160 mm no. of strokes 40 /min distance table/ram, max. stroke up, adjustment up 460 mm table surface area 910 x 680 mm Hole in the table 400 mm Redpfx Ajvzxnwohvsbw table height over floor 800 mm passage to the back 400 mm ram surface 630 x 400 mm ram adjustment 80 mm power requirement 7,5 kW weight 7,5 t dimensions (WxDxH) 1,7 x 2,0 x 3,0 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1990, pressure 500 t distance between columns 1220 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 1000 mm table surface area 1600 x 1200 mm Rjdpfsvut Tbex Ahvjbw pressure of drawing cushion in table 320 t stroke of drawing cushion in table 150 mm drawing cushion surface in table 750 x 625 mm pressure of drawing cushion in ram 180 t stroke of drawing cushion in ram 100 mm drawing cushion area in ram 750 x 625 mm ram surface 1600 x 1200 mm table height over floor 800 mm speed down 665 mm/s speed up 530 mm/s working speed 34 - 100 mm/s quantity of oil 2000 l power requirement 180,0 kW weight 40,0 t Dimensions (WxDxH) 3,2 x 2,4 x 7,5 m Depth of foundation pit 4,1 m Height above floor 5,55 m YOM 1975 - Overhaul 1990 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table and ram depth of the foundation pit approx. 4,1 m as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1979, pressure 160 t distance between columns 1620 mm stroke 600 mm Distance table/ram, stroke up 800 mm table surface area 1600 x 1100 mm table height over floor 750 mm die cushion pressure in table 63 t die cushion stroke in table 180 mm Die cushion area in table 1300 x 750 mm side window 600 mm ram surface 1600 x 1100 mm oil volume 1160 l power requirement 30,0 + 16,0 kW Rjdpevut Rysfx Ahvebw weight 23,6 t dimensions (WxDxH) 2,9 x 2,3 x 4,65 m Height above floor 4,26 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F Video at seller's site before dismantling available

Condition: used, Year of construction: 2004, pressure 63 t stroke 160 mm throat 280 mm dayligth 360 mm table surface area 560 x 490 mm table height over floor 860 mm ram surface 280 x 280 mm power requirement 22,0 kW Weight 3,6 t dimensions of the machine ca. 0,8 x 1,7 x 2,8 mxmxm hole in the table 125 mm Rbsdpfsvut H Iox Ahvjw yom 1980 - Modernization of control (Siemens S 7) in 2004 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, two-hand operation

Condition: used, Year of construction: 1994, Pressure 100 t distance between columns 910 mm stroke 600 mm distance table/ram, stroke up 1000 mm table surface area 1340 x 1085 mm hole in the table 705 x 405 mm table height over floor 800 mm side window 685 mm ram surface 1235 x 1000 mm oil volume 450 l capacity of ejector 7,5 t ejector stroke 150 mm Rbsdpevuk E Ijfx Ahvjw speed down 380 mm/s speed up 185 mm/s working speed 28 mm/s oil volume 450 l power requirement 15,0 kW weight 9,5 t dimensions (WxDxH) 2,3 x 1,9 x 3,6 m SPECIAL DEAL as is where is, NOT CHECKED WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: used, Year of construction: 1988, pressure 300 t distance between columns 1800 mm stroke 1000 mm Distance table/ram, max. stroke up, adjustment up 1300 mm Table surface area 1600 x 1200 mm Table height above floor 1080 mm Ram surface 1600 x 1200 mm Weight 24,0 t Dimensions (WxDxH) 2,8 x 2,1 x 6,0 m permitted for manual loading according to the German Safety Regulations (UVV §20) Rodpfxsvut Hno Ahvsbw with oil-hydraulic drive, controllable dependant on pressure/time and way, two-hand operation can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F Video at seller's site before dismantling available

Condition: used, Year of construction: 2000, pressure 075 t throat 295 mm stroke 16 - 140 mm Stroke rate 75 / min Distance table/ram, max. stroke up, adjustment up 450 mm Table surface area 800 x 595 mm Hole in the table 330 x 230 mm Table height above floor 745 mm Ram surface 470 x 180 mm Ram adjustment 80 mm Power capacity 5,5 kW Weight 5,0 t Dimensions (WxDxH) 1,5 x 2,5 x 2,5 m overhauled by the manufacturer in 2000 with motor, pneumatic clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, motorized central lubrication, two-hand and foot operation as is where is, WITHOUT any additional work, free loaded to truck Rbjdpsvut Hhjfx Ahvew

Condition: used, Year of construction: 1973, pressure 500 t distance between columns 1620 mm stroke 40 - 160 mm no. of strokes 32 / 48 Hub/min dayligth (stroke and adjustment up) 660 mm column travel -side 400 x 430 mm table surface area 1600 x 1300 mm table height over floor 750 mm ram surface 1400 x 1200 mm power requirement 44,0 / 66,0 kW Redpfxjvuk Euj Ahvsbw weight of the machine ca. 56,00 t required space 3,55 x 2,55 x 5,1 m with motor, pneumatic clutch/brake combination (Desch), mechanical overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment as is where is, WITHOUT putting into operation / WITHOUT additional work, free loaded to truck Video of 'sister maschine' available

Condition: used, Year of construction: 1995, pressure 063 t throat 260 mm stroke 12 - 120 mm Rodpjvut Ewjfx Ahvobw Stroke rate 30 - 130 / min Distance table/ram, max. stroke up, adjustment up 495 mm Table surface area 800 x 560 mm Hole in the table 220 mm table height over floor 800 mm Passage to the back 270 mm Ram surface 450 x 360 mm Ram adjustment 120 mm Power capacity 5,5 kW Weight 5,0 t Dimensions (WxDxH) 1,8 x 1,5 x 2,7 m only permitted for automatic mode according to the CE Regulations with infinitely variable drive, pneumatic clutch/brake combination, mechanical overload protection in ram, fix table can be inspected in running condition in our warehouse

Condition: ready for operation (used), C-frame Press, Hydraulic Press, PYE Press 3t, Used Machine Manufacturer: VEB Wema Type: PYTE 3.15 Overall dimensions: 500 x 730 x 1170 mm Pressing force: 3.15 tons Rjdpfsw Hc H Hjx Ahvebw Stroke: 280 mm Table size: 280 x 280 mm Electrical data: 380 V; 1.5 kW; 4 A

Condition: ready for operation (used), Design: vertical press with four columns. The vertical press platen is driven by an electric motor, the lower platen can be pulled out with the tool. -Dimensions: 2100x1600x3000mm Rbsdpetty Nkjfx Ahvjw -plate size: 950x1120mm -Electrical data: 380V; 43A; 22kW

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, CNC Vertical Machining Center "MÜGA S 3030" With MITSUBISHI path control Year of manufacture: 2013 Travel distances: X 300 Y 250 Z 250 Spindle speed range: 60 – 15,000 rpm, stepless Including the following accessories: Rigid angle table, 400 mm x 250 mm clamping surface Vertical tool changer with 12 magazine slots (SK 30) Various tool holders (SK 30) Dual pallet changer 4 pcs. Allmatic vices, jaw width 100 mm Rodpfxeyx H Nvj Ahvsbw Electronic handwheel Full safety enclosure with sliding doors and interior lighting Coolant unit with paper band filter Coolant system 2-color signal light Chip conveyor 6 pcs. machine feet Operating manuals

Condition: good (used), Year of construction: 1975, functionality: fully functional, Veneer Press - 3300 x 1350 mm - External dimensions: 4000 x 1650 x 2450 mm - Year of manufacture: 1975 - Approx. 5,500 kg - Electrically heated plates, no dents - HP 120 - Pressing room height: 400 mm - 6 cylinders - Rack guide - With emergency cord Rbodpfsx Akuzox Ahvow Shipping available at extra cost!

Condition: used, #200103 Trumpf EVO22W10 (without identification groove) 86.00° R1.00 / H=100.00 / 500 kN/m Segment lengths: 2x 25 mm 2x 30 mm 1x 35 mm 2x 40 mm 1x 45 mm 2x 50 mm 7x 100 mm 2x 200 mm 2x 300 mm 7x 500 mm ----- #200104 Trumpf EVO22W10 (identification groove at the bottom) 86.00° R1.00 / H=100.00 / 500 kN/m Segment lengths: 2x 40 mm 2x 45 mm 2x 50 mm 2x 200 mm 1x 300 mm 3x 500 mm ----- #200105 Trumpf EVO22W10 (identification groove in the center) 86.00° R1.00 / H=100.00 / 500 kN/m Segment lengths: 3x 25 mm 2x 30 mm 2x 35 mm 2x 40 mm 2x 45 mm 1x 50 mm 4x 100 mm 2x 200 mm 2x 300 mm 8x 500 mm ----- #200107 Trumpf EVO26W24 86.00° R2.50 / H=100.00 / 700 kN/m Segment lengths: 1x 30 mm 1x 35 mm 1x 40 mm 1x 45 mm 1x 50 mm 3x 100 mm 1x 200 mm 1x 300 mm 4x 500 mm ----- #200108 Trumpf / Schmid EVO24W16 86.00° R1.60 / H=100.00 / 700 kN/m Segment lengths: 1x 25 mm 1x 30 mm 1x 40 mm 2x 45 mm 2x 50 mm 3x 100 mm 1x 200 mm 1x 300 mm 5x 500 mm ----- #200109 Rsdpfx Ahjyx Hxwsvsbw Trumpf EVO20W6 86.00° R0.60 / H=100.00 / 400 kN/m Segment lengths: 3x 100 mm 2x 200 mm (1x damaged) 6x 500 mm ----- #200110 Trumpf EVO22/S-W10 86.00° R1.00 / H=100.00 / 380 kN/m Segment lengths: 1x 40 mm 2x 100 mm 1x 200 mm 1x 300 mm 4x 500 mm

Condition: ready for operation (used), Hydraulic Press Machine, Coil Winding Press Machine, Used Equipment Dimensions: 1340 x 1240 x 2740 mm Weight: 640 kg Rjdpfsu Hkfpsx Ahvjbw Electrical Specifications: 400V Hydraulic Pressure: 100 bar Stroke Length: 180 mm

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 5,500 mm, travel distance Y-axis: 525 mm, travel distance Z-axis: 380 mm, Model: COMET ISOLA ES381 V06 Year: 2004 Control: ISAC Rbjdeyx Hn Sepfx Ahvew ‘X’ axis Stroke: 5500mm ‘Y’ axis Stroke: 525mm ‘Z’ axis Stroke: 380mm Spindle Taper: ISO 40 Spindle Speeds: 24,000 RPM

Condition: good (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 20 m/min, table load: 1,350 kg, spindle speed (max.): 12,000 rpm, Tool changer: 24 positions IKZ (internal coolant supply): 40 bar Rbjdoyx E Nnopfx Ahvew Probe: Renishaw Tool measurement: Renishaw Footprint (W x D x H) (Doors closed / without control / chip conveyor): 3250 x 2220 x 2950 mm Transport weight: 8,900 kg

Year of construction: 2004, condition: excellent (used), machine/vehicle number: 2151, KNUCKLE JOINT PRESS "GRABENER" TYPE GK 360 Rbodpfjd Hpcyjx Ahvew Manufacturing origin CE - France Voltage 380V/50Hz/3ph Netweight 8800 kg Custom position 8462.1020 Dimensions 230x170x260 cm TECHNICAL DATA Power in tons 360 T. Table length 440 mm Table width 525 mm Ram stroke 60 mm Number of strokes 60 / Min. Motor power 11 kW errors and omissions excepted-data given without obligation

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, controller manufacturer: Heidenhain, For sale: Used DMC 635 – Powerful Vertical Machining Center Upgrade your production processes with this robust and high-performance DMC 635 from DMG MORI! This vertical machining center is ideal for a wide range of milling applications, offering excellent performance when machining various materials. Key Features: • High rigidity and stability: Ensures precise machining results and long service life. • Large working area: Provides ample space for processing large workpieces. • High spindle speed: Enables fast and efficient machining operations. • Sturdy construction: Guarantees longevity and reliable performance. • CNC control: Equipped with a user-friendly CNC controller for easy programming and operation. Additional Information: • Year of manufacture: 2006 • Condition: good, used • Control: Heidenhain iTNC530 • Travel paths: 635 x 460 x 510 mm • Spindle speeds: 20 – 10,000 rpm Ideal for: • General machining • Tool and mold making • Single-part and small-batch production • Mechanical engineering Why choose this DMC 635? Rbsdpfxjyx D T Eo Ahvsw This machine has been regularly serviced and is in good used condition. It offers a cost-effective way to expand your machining capabilities and increase your productivity.

Condition: good (used), Year of construction: 2001, Machine-Details: Stock-No. 1022-2276 Type of machine Surface Grinding Machine - Vertical Make REFORM Type AR 42 Typ 19 CNC Year of manufacture 2001 Type of control CNC Storage location Monheim (Germany) Country of origin Germany Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details: grinding length 4200 mm grinding width 1300 mm workpiece height 550 mm Control SIEMENS 840 D magnetic clamping plate 4200 x 1300 mm segment head diameter 1400 mm grinding motor turning speeds up to 320 U/min. grinding motor 306 kW weight of the machine ca. 50,0 t Additional information: Segment dimensions: 120/106 x 41 x 250 mm Number of segments: 1 set = 26 pieces Grinding motor feed: 0.5 - 35 m/min, infinitely variable Grinding motor feed: - in steps: 0.002 - 1 mm continuous: up to 5 mm/min. infinitely variable Equipment: * CNC-control SIEMENS Sinumerik 840 D * Automatic hydr. swivelling of the grinding motor from hollow to cross grinding * NC-controlled adjustment of the Marposs measuring head by means of precision support. - new grinding dimensions can be entered into the control, whereby the the grinding head automatically adjusts to the corresponding height. * Dresser with adjustment axis in the machine bed * Coolant system * Electro-magnetic table * Switch cabinet * Oil mist extraction * Documentation Dimensions (length x width x height) Bed: 11800x2200x1400 mm, weight 27500 kg Grinding head: 3000 x 2500 x 3100 mm, estimated weight 14 t 2 x Oil mist extraction: 1200 x 800 x 2000 mm each Control panel: 1200 x 800 x 400 mm Small control cabinet: 1400 x 1400 x 800 mm 2 x gears each 1200 x 800 x 500 mm Control cabinet: 1600 x 800 x 2000 mm Control cabinet: 3400 x 600 x 2400 mm Rsdpfjyx Duvox Ahvebw

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: TNC430, rotary table diameter: 540 mm, spindle speed (max.): 16,000 rpm, operating hours of spindle: 32,000 h, spindle nose: HSK63, number of slots in tool magazine: 30, Equipment: rotational speed infinitely variable, Very well-maintained HERMLE C800-U. Rjdpfox Hg E Tox Ahvjbw Swiveling rotary table: 540 x 540mm Program runtime only approx. 34,000 hours. Field of application: Toolmaking Service carried out by the manufacturer. Last spindle head replacement: 04/2017 New A-axis drive Heidenhain iR probe

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, total width: 6,265 mm, total length: 7,420 mm, total height: 3,900 mm, Baling Press Henschel PS 3-30 / 30 B Year of manufacture: 1999 (refurbished and modernized by ATM in 2016) Immediately operational (all necessary repairs and servicing have been carried out by us) Main dimensions of the entire machine: Length: 7420 mm Width: 6265 mm Height: 3900 mm Total weight: approx. 38 t Feed opening: 1210/2150 x 1900/2340 mm Technical data: Motor: 1 x 90 kW Pressing force: - 1st compression: 1000 kN - 2nd compression: 1570 kN - 3rd compression: 2000 kN - Bale door closing force: 200 kN Bale size: 300 x 300 mm Redpfx Ahsyx Axgovsbw