Used Vacuum Dry Chamber for sale (7,219)

Year of construction: 2001, condition: excellent (used), RICE REDUCTION!!! Ppodpfx Aepgultohvop Instead of 1.150 EUR only 950 EUR!!! Dryer with material conveyor Moretto Type SHD25 power 2940 Watt Moretto material conveyor Type T 2L Vacuum pump Moretto Type VI T2

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVD Pump support bench ATEX: Ex-d-IIB-T4 – IP55 Power: 11 kW Atmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Ppodpsx R D Efjfx Ahvsp Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: used, Year of construction: 1988, Manufacturer : Comber Model: Pharmadry PH 100 Year : 1988 Type : vacuum dryer   Maximum temperature: 99°C Material: 304 and 316 stainless steel (in contact with product). Classification: Atex EEx IIB T4   Main tank diameter : ø 500 mm Main tank depth: 700 mm Ppjdpfx Ajx R Aviohvjp Power: 4 HP Filter Pressurised receiver tank Tubular heat exchanger   Gaskets: new Paint: new Mechanical seal: As is, good condition

Condition: used, // Sold as is or reconditioned // Vacuum paddle dryer mixer Ppjdpfx Ahox Rz Spevep Used for products such as powders/powdery substances. 316 stainless steel Tank diameter 1000 x 2000 Volume: 1100 litres Jacketed 86 litres / 1 bar - 120°C Heated agitator 235 litres / 1 bar - 120°C Agitation by 8 scraping blades Loading via 400 diameter Discharge 350 diameter with guillotine valves ADF 15 kW motor Self-cleaning filter

Year of construction: 2026, condition: reconditioned (used), functionality: limited functionality, machine/vehicle number: 559, Dryer optimized for thick timber or hardwood Usable length: 5000 mm Usable height: 1100 mm Usable width: 1100 mm New electrical cabinet and sensors Controlled drying function Ppedpfx Aoya Ik Aehvop Missing external rail and trolley (can be supplied or we will assist the buyer with fabrication) Dryer can be inspected in department 74

Condition: excellent (used), Here we offer you a chamber dryer. Outer dimensions approx. width: 1.885 mm depth: 1.200 mm height: 2.425 mm Usable space dimensions approx. width: 1.030 mm depth: 1,000 mm Height: 2,100 mm Usable space: 2.2 m³ Ppedegm Hwuspfx Ahvep Nominal temperature: 100 °C Working temperature: 85 °C Heating medium: 3 x 400 V, 50 Hz Heating capacity: 20 kW Circulating air volume: 4,500 m³/h / 400 Pa Motor power: 1,1 kW Protection class: IP 54 The chamber heating furnace must not be used for flammable or explosive substances. The chamber heating furnace must not be installed in the Ex-area. Paternoster device External dimensions: Height: 1,880 mm Width: 809 mm Depth: 950 mm support sets: 13 pieces Pitch: 228 mm Carrying set width: 354 mm Carrying set depth: 320 mm useful height: 135 mm Power of drive motor: 0.25 kW at 189 Nm Transport speed: on average 5 m/min. Payload/carrier set: max. 10 kg total payload: max. 130 kg total weight loaded: max. 730 kg year of construction: 2005 Type: Ke/SO Condition: used / used Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Further questions we can answer on the phone for you.

Condition: used, WSA Lignomat vacuum dryer Control unit: Bollmann Tromatic 910GH Pedpjxxpdtsfx Ahvjpp Depth approx. 10 m

Condition: used, No. 3213 Thermal treatment system / vacuum dryer WTT Used, year of construction 2017 Thermal treatment system / thermal chamber for the modification of wood The WTT thermal chamber is a system for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on the thickness and type of wood. The system has a powerful energy and heat transfer system and works with a gas or oil-fired boiler system that uses thermal oil as a heat transfer medium. Technical data: Capacity: 5950 - 9900 m³ of wood per year (for 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions: 10500 x 1300 x 1100 mm LWH Minimum board thickness: 10 mm Power connection: 3 x 400 V, 50 Hz + zero + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heat output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel duplex EN 4462 Psdpfxsv Si Sze Ahvopp Door opens hydraulically, with 1.5 kW drive Working pressure: 0.1 to 15 bar (absolute) Working temperature: 0 °C to 220 °C 200 mm glass wool insulation, clad with 1 mm galvanized sheet steel Main components: 1. autoclave, in which the heat treatment takes place 2. vacuum system that sucks the air out of the autoclave before heat is applied 3. energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. nitrogen generator 6. gas cooler system Heating and cooling system: Heat exchanger: 8 units (4 on each side) Material: Stainless steel pipes (seawater resistant) Total floor area: 165 m² Cooling water consumption: 1000 l/batch (not contaminated, only heated) Control and operation: Control system: WTT ExoT (fully automatic) 22” color monitor, IBM computer, printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special equipment: Hydraulic rail bridge for convenient transportation of wooden trolleys Automatic trolley extraction with cable winch (1.5 kW) 2 MW thermal oil boiler (heating) Fuel oil tank (4000 l) with measuring system Insulated 20 foot steel container for heating module Stainless steel safety chimney (300 mm diameter, 6000 mm length) Functional description: 1. filling the autoclave with wood 2. creating a pre-vacuum 3. filling with gas 4. heating 5. modifying 6. cooling 7. pressure equalization 8. creating a post-vacuum / drying 9. pressure equalization 10. emptying Certified EC Pressure Equipment Directive (PED) 97/23/EF Construction EN 13445 Sale on behalf of customer, from location near 5020 Salzburg (Austria), without dismantling, transportation and assembly Dismantling, loading and transportation by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: ready for operation (used), Technical characteristics tank 1000 mm tank length 4600 mm trays dimension 700 x 4000 mm Pedpfet Hzvwjx Ahvspp height 700 mm max closed length 4700 mm electric boiler programming example: wood thickness 45/60 mm initial humidity 35/45% plate temperature 45/60 C ° total time 90 H (manufacturer data cannot be committed) Power and Motors Voltage: 400 V Pluging: Three-phased Overall dimensions Lenght: 4600 mm Width: 1000 mm Height: 1100 mm Weight: 1500 Kg

Condition: ready for operation (used), Technical characteristics Total volume 1,6m3 Length 4800 mm Width 700 mm Loading height 500 mm Brand new membrane Cycle and temperature adjustable on the control panel according to the species and thickness of the wood Brand new heating resistance and vacuum pump 6 heating plates Ideal for carpentry and fast drying (-90h) of small volumes of lumber Power and Motors Overall dimensions Podpfx Aot Hzvqjhvjpp

Condition: ready for operation (used), Technical characteristics Volume: 12 m3 Useful dimensions : Length 7400 mm Width 1500 mm Ppedpfx Ajt Hzvkehvep Height : 1350 mm External dimensions: 8400 mm x 2700 mm 28 circulation heating plates (Dimensions 6400 mm x 700 mm) Completely revised New vacuum pump 5,5 kW (TRAVIANNI) Power and Motors Overall dimensions

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. Podpfx Aefzq Stshvepp This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. Ppodpfx Ahsflmdbovop The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog

Year of construction: 2020, condition: new, Description Automatic sprinkling chamber is a solution that allows you to reduce costs, improve quality and increase the efficiency of the surface preparation process. The automatic sprinkling chamber is equipped with a set of spray pumps, it was designed so that as little liquid as possible after the process migrates to subsequent processes, thus saving money and improving the quality of washing. This is very important, because apparent savings in systems made without the use of these solutions can generate in the future much higher costs associated with chemistry and waste disposal which will simply be more. Attention should also be paid to problems with maintaining the required bath parameters. Research and development work allowed us to develop a sprinkling chamber with the function of drying details (option) with hot air blown by a set of fans after the washing process. Ppsdpfx Ahsfy T Szevsp The sprinkling chamber is equipped with an advanced system for creating your own macro programs, which can consist of 10 steps each, depending on the number of tanks, processes can be repeated, their order can be changed, etc. Each tank has its own unique icon and name, enabling the operator to work intuitively. Optionally, the tanks can be equipped with bath replenishment systems, which can be performed e.g. between processes or at the end of the cycle. • Control installed on the swivel arm for better access • PLC microprocessor control • 7 "touch operator panel • Very large number of nozzles, compared to other solutions • (Option) The possibility of drying details after the washing process • The ability to create your own advanced programs • Advanced damper system made of acid-resistant sheet metal, double protected by limit switches • Tight closing and full flap opening control system • To minimize fluid mixing, separate pipelines, nozzles, tanks for each treatment • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible • Fully automatic operation/ Prices are given in the catalog

Year of construction: 2002, condition: excellent (used), Parts in contact with the product are made of stainless steel 1.4571, the rest of the dryer is made of 1.4301. Machine Name: Continuous Horizontal Vacuum Paddler Dryer used Ppodpfx Ajitcu Eohvop Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Construction year: 2002 Speed: 107 rpm Material: 1.4301 Driving force: 5,5 kW Model: EExdellCT4 Total content: 235 Liter Parts in contact with product: 1.4571 Equipment: Double jacket, mechanical seal Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1600 kg Technical documentation: Yes Message: Operating temperature 130°C Design temperature 200°C Internal pressure mixer -1/+3 bar Pressure double jacket +6 bar Accessories: Base frame Condition: Used

Condition: new, functionality: fully functional, Year of construction: 2026, Dry and Wet Ball Mill: Structure, Operation, and Technical Details A ball mill is a fundamental grinding device used in mineral processing, cement manufacturing, chemical production, and other industrial applications. It works by rotating a cylindrical shell filled with grinding media—usually steel balls—causing impact and friction that reduce materials to fine powder. Based on the grinding environment, ball mills are classified into dry and wet types, each suited for specific materials and process requirements. Working Principle Both dry and wet ball mills operate on the same mechanical principle. The rotating cylinder, driven by a motor through a gear system, lifts the grinding media and material along the inner wall. As the rotation continues, the balls fall under gravity, striking and grinding the material. The difference lies in the presence or absence of a liquid medium during grinding. Dry Ball Mill A dry ball mill is used when the material must remain moisture-free or when water could affect product quality. It is commonly applied in cement clinker, limestone, quartz, and refractory material grinding. The discharge can be either grate type or overflow type, depending on the desired fineness. Technical Features: Feeding size: ≤25 mm Discharge size: 0.075–0.4 mm Capacity: 0.65–90 t/h Liner material: High manganese steel or wear-resistant alloy Drive system: Gear-driven or direct-coupled motor Dust control: Equipped with air exhaust and dust collector Advantages: Suitable for materials sensitive to moisture No drying process required after grinding Lower corrosion risk and simpler maintenance Easier material classification and separation Limitations: Dry grinding produces more dust and heat, requiring efficient ventilation and dust collection systems. Wet Ball Mill A wet ball mill operates with water or another liquid medium added to the material. The slurry formed during grinding improves efficiency by reducing friction and preventing excessive heat buildup. It is widely used in ore beneficiation, ceramics, and chemical industries. Technical Features: Feeding size: ≤25 mm Discharge size: 0.074–0.2 mm Capacity: 0.65–615 t/h Liner material: Rubber or high-chromium steel Discharge method: Overflow or grate type Auxiliary equipment: Classifier, pump, and thickener for slurry circulation Advantages: Higher grinding efficiency and finer particle size Reduced dust and noise levels Continuous operation suitable for beneficiation circuits Better control of particle uniformity Limitations: Requires drying if the final product must be in powder form and involves more complex slurry handling. The selection between dry and wet grinding depends on the material characteristics, downstream process, and environmental conditions. Dry mills are preferred for materials that must stay moisture-free, while wet mills are ideal for fine grinding and slurry-based processes. Psdpfx Aeq Nx Aljhvspp Conclusion Dry and wet ball mills share the same mechanical structure but differ in their grinding environment and application scope. The dry type offers simplicity and low maintenance for moisture-sensitive materials, while the wet type provides higher efficiency and finer output for mineral and chemical processing. Understanding their technical parameters and operational differences ensures optimal equipment selection, improved productivity, and reliable performance in industrial grinding operations.

Condition: used, Status: As good as new Manufacturer: Pfeiffer Type: TMH 064 Podpfoc Irrksx Ahvepp Mod. no.: PM P02 366 Comment Can only be operated with the appropriate backing pump and control system. Delivery time: on request

Condition: new, Year of construction: 2025, Roots booster vacuum pump. Available in stock. Marpa Vacuum brand pump. Pump completely new. 12 months warranty Nominal flow: 500 m3/h at 50Hz. Final vacuum: 3x10^-4 mbar Any clarification, do not hesitate to contact us. Pedjftzmdepfx Ahvspp

Condition: new, Year of construction: 2025, Rotary vane vacuum pump in oil bath. Marpa Vacuum brand pump Pump completely new. 12 months warranty. Nominal flow: 100 m3 / h at 50Hz. Final vacuum: 0.2 mbar abs. Any doubts, do not hositate to contact us. Psdpfeftzf Ejx Ahvspp

Condition: new, Year of construction: 2025, Rotary vane vacuum pump in oil bath. Marpa Vacuum brand pump Pump completely new. 12 months warranty. Nominal flow: 630 m3 / h at 50Hz. Final vacuum: 0.2 mbar abs. Ppedpfx Ahoftzuwsvep Any doubts, do not hesitate to contact us.

Condition: new, Year of construction: 2025, Oil lubricated rotary vane vacuum pump. Available in stock. Pedeftzx Eepfx Ahvspp Completely new. 12 months warranty Nominal flow: 25 m3 / h at 50Hz. Ultimate pressure: 2 mbar abs, Any clarification, do not hesitate to contact us.

Condition: new, Year of construction: 2024, Roots booster vacuum pump. Available in stock. Marpa Vacuum brand pump. Pump completely new. 12 months warranty Nominal flow: 500 m3/h at 50Hz. Podpfx Ahsfk Si Sovepp Final vacuum: 3x10^-4 mbar Any clarification, do not hesitate to contact us.

Condition: new, Year of construction: 2026, Rotary vane vacuum pump in oil bath. Available in stock. Psdpfx Ajfk Si Nshvspp Completely new. With 12 months warranty. Nominal flow: 63 m3 / h at 50Hz. Final vacuum: 0.1 mbar abs. Any clarification contact us.

Condition: new, Year of construction: 2025, Rotary vane vacuum pump in oil bath for work with MAP atmosfere ( hig % of O2) Available in stock. Completely new with 12 months warranty Psdjfk Sizopfx Ahvjpp Nominal flow: 100 m3 / h at 50Hz. End vacuum: 0.5 mbar abs. Any clarification, do not hesitate to contact us.

Condition: new, Year of construction: 2025, Rotary vane vacuum pump in oil bath. Available in stock. Completely new. 12 months warranty. Model: Marpa Vacuum MV 0300N Ppsdpfxoftzr Us Ahvep Nominal flow: 300 m3 / h at 50Hz. Final vacuum: 0,1 mbar abs. Motor power: 7,5 Kw Any clarification, do not hesitate to contact us.