Dry claws vacuum pump

Busch Mink MM 1322 A V

Condition: like new (used), Year of construction: 2011, DMC USK 1350 M3 wide-belt sander - Italian production Njdpfxogr Er So Abgsdd - transverse aggregate so-called sergeant - year of production 2011 - electric and pneumatic ionizer TECHNICAL PARAMETERS: grinding width 1350 mm grinding height 4-170 mm minimum workpiece length 365 mm vacum table 1 aggregate: transverse tape, the so-called sergeant engine power 12 kW 2nd aggregate: rubber shaft hardness of 95 shore diameter 240 mm engine power 18.5 kW 3rd aggregate: rubber shaft hardness of 55 shore shaft diameter 300 mm engine power 15 kW 4 aggregate: pneumatic shoe engine power 15 kW 5 aggregate - cleaning brush - 2.2 kW 6 aggregate - blowing blowing on the tape pneumatic oscillation feed speed 2.5 - 18 m / min pneumatic straps tension electric height adjustment spigots diameter 3 x 200 mm, 8 x 80 mm, 2 x 160 mm, 1 x 150 mm transport dimensions (length / width / height) 370/250/250 cm weight 5000 kg

Condition: new, The new vacuum pump is available from stock and ready for immediate use. Njdpfxottzxro Abgjdd We recommend that it is only installed by trained personnel. Adaptation material available on request. Oil filling: without Technical data: 2.7 kW 3 x 230/400 V 50 Hz 1500 rpm Oil return suction in non-return valve housing Gas ballast Incl. level switch Final pressure: 0.1 mbar Subject to prior sale! This offer is only valid for customers within Germany and in European countries!

Condition: excellent (used), JET is a numerically controlled machining center with 5 interpolated axes, designed for machining operations as: Ndsdpoirmyqsfx Abgjd Tenoning / Finger Jointing / Drilling Mortising / Milling / 4/5 axes profiling. Technical data: Full digital NC axes N. 5 Interpolated linear axes N. 3 Interpolated rotating axes N. 2 Longitudinal X axis 1,800 / 2,200 mm Transversal Y axis 1,300 mm Vertical Z axis 650 mm Length of clamp support table 1,400 / 1,800 mm A axis - Unlimited C axis +/- 180°

Condition: refurbished (used), The reconditioned vacuum pump is available from stock and ready for immediate use. We recommend that installation be carried out by trained personnel only. Adaptation material available on request. Oil filling: M-VAC 100 Technical data: 7.5 kW 3 x 190 - 208/380-415V/220-240V 50 Hz incl. gas ballast in B-cover incl. level switch cooler reduced Ultimate pressure with open gas ballast: 1,5 mbar Ultimate pressure with closed gas ballast: 0.82 mbar Subject to prior sale! This offer is only valid for customers within Germany and European countries! Ndedpfx Asipu Umjbgjd

Condition: used, Plant: lamella separator, lamella clarifier, lamella separator Nsdpfx Aeppyhtsbgodd Condition: used, up to 120 m³/h depending on medium Design: robust, powerful design Material: VA on conatin frame, 30 ' container, scraper plates: in PP dimensions: LXBXH 7580X2435X3000 mm Weight: approx. 8000 kg Principle: The dirty water is fed to the inlet of the lamella separator and flows downwards in it. Due to the arrangement of the lamella plates in the lamella separator, the dirty water is diverted below the lamellae and flows upwards through the lamellae. Thus, the solids sink to the bottom of the lamellas. The purified water is transported to the outlet. The solids on the lamellas gradually slide down along the lamella plates. This is where the sludge funnel is located. Scraper: Optionally, we offer the lamella separator with a scraper, which keeps the sludge flowable. Application: Separation of solids and liquids by sedimentation. Lamella separators are often used as a preliminary stage before filter presses or decanters for thickening. By pre-thickening a thin sludge, the filter press can be sized smaller in terms of filter area. The plant is in good condition and is available for rent or purchase. An inspection at our plant is possible by arrangement. We also offer new lamella separators with a delivery time of approx. 8 to 10 weeks !

Condition: excellent (used), ein ausgesprochenes Einzelstück,ca.12x6 m Njdpfx Absfi Tmcjgjdd

Condition: good (used), Roots blowers Manufacturer: Leybold Type: RUVAC WSU 2001 Ndodpsdnv D Sefx Abged Cat.-No.: 11741 Suction capacity: approx. 2000 m ³/h Status: Rebuilt Warranty: 12 months (image)

Year of construction: 1983, condition: good (used), machine/vehicle number: 2103, max. bore of chuck: 1 - 20 Ø mm max. boring diameter: 20 mm mm cap washer diameter: 100 mm cap washer rotation: ca. 4500 Upm engine: 380 V, 0,25 kW Nodpfednfz Nex Abgsdd space needed: 600 x 450 x 1380 mm

Year of construction: 2012, condition: good (used), Machine has 5600 total spindle hours Datron D 5 Dental - milling machine, year of manufacture 2012, 5-axis simultaneous machining, PC control – Beckhoff, automation / 8 blanks, milling spindle 1.8 kW, spindle speed up to 50,000 rpm, tool holder HSK C 25, 15-position tool changer, rotary and tilting axis, Nodpfswvqh Dex Abgedd A axis +/- 25°, B axis +/- 45°

Condition: used, Rotary vane vacuum pump - oil lubricated Manufacturer: Leybold Type: Sogevac SV 200 Cat. No.: 10927 Status: Refurbished Warranty: 12 months Included: Oil filling (mineral oil), operating manual with list of initial files Voltage: 50/60Hz 230-400/460V Motor rating: 4 KW N. suction capacity: approx. 200 m³/h Final pressure without gas bellow: approx. 0,08 mbar Njdpfx Abecnyy Hsgjdd Delivery time: ex stock