Used Vacuum Band for sale (7,237)

Condition: used, Year of construction: 1997, dimensions of saw-band 3150 x 25,4 x 0,9 mm Dujdpfx Acsyyc A Iswor 20/40 m/min capacity 90 degrees: round 260 mm capacity 90 degrees: square 250 mm capacity 90 degrees: flat 320 x 200 mm capacity 45 degrees: round 230 mm capacity 45 degrees: square 210 mm capacity 45 degrees: flat 240 x 200 mm

Condition: new, Year of construction: 2025, Diameter of saw wheels mm 800 Max. cutting height mm 400 Stationary working table mm 1290 x 800 Max. blade width mm 54 x 0,9 Max. and min. blade length mm 5530 / 5380 Dedpfx Aeglfv Decwour Motor power Kw 15 (HP 20) Sawdust hoods nr Nr. 2 Ø 120 Nr. 1 Ø 100 Compressed air consumption (wheels braking and feeder opening) bar 6 Net weight Kg 880 Feeder Height of feeding carpet mm 300 Length of carpet fence mm 750 Idle rollers dia. mm 160 Max. rollers-blade clearance mm 200 Max. fence-blade clearance mm 200 Variable feed speed rate mt/min 0-30

Condition: excellent (used), functionality: fully functional, Cooled vacuum tumbler Brand Rühle Model: MKR 300 Becker vacuum pump Year of construction: 2000 Dimensions: 2000 mm x 1250 mm x 3000 mm Dujdpswatd Nefx Acwer

Condition: good (used), Sturdy block clamping carriage for horizontal fence or band saw Length approx. 9.0 m. Track width 920 mm. 6 clamping blocks. With hydraulic feed. Also suitable for feeding drying kilns etc. Djdpfotqd Nasx Acwjur

Condition: excellent (used), 4-SIDES LINE of Sizing-Edge Banding and Drilling, composed of the following machines: A) Loader (portal/bridge) double pick-up station "IMA" with central motorized rollers conveyor. With 2 external on-ground roller ways to in-feed the piles (stacks) of panels to the Loader. B) 1st Double-side Sizing & Edge Bander "IMA" Mod. Combima/N/II/230/A/R3 (mm 1300) C) Turning Station "IMA" (from lengthwise to crosswise) with double cone system. D) 2nd Double-side Sizing & Edge Bander "IMA" Mod. Combima / II /740 / B / R3 + (mm 3300) With KFA 30 (multi-profile copying Unit for fine-trimmimng and corner rounding) Dsdpfxoyyb Suj Acwjur E) Drilling machinee "IMA" Mod. I-Magic (with 2 horizontal units + 4 bottom vertical unitsi) F) Motorized rollers conveyor "IMA" G) Turning Station "IMA" (from lengthwise to crosswise) with double cone system. H) Stacker (portal/bridge) double stacking station "IMA" with central motorized rollers conveyor. With 2 external on-ground roller ways to out-feed the piles (stacks) of panels from the Stacker

Year of construction: 1999, condition: good (used), functionality: limited functionality, !!! Important!!! The systems have now been dismantled. The system components are available for inspection. Offered here are two functional SLC (Surface-like Chrome) vacuum coating systems/evaporation systems from PVT GmbH. The third, non-functional system is no longer for sale. The system documentation is available in paper form and will be provided upon purchase. To operate the systems, a compressed air supply, power supply, and water cooling are required, which must be provided by the buyer. All other PVT processes are, of course, also possible. The system was primarily used to treat wheel rims. Other workpieces made of aluminum, steel, or plastic are also possible, such as bathroom/kitchen fixtures, motorcycle and car components, door and window handles, etc. What is the advantage of the SLC process compared to chrome plating: - SLC coating is a high-gloss coating that is visually comparable to a galvanic chrome coating. The SLC coating is a high-gloss coating that is visually comparable to a galvanic chrome coating. - Significantly less susceptible to scratches and chipping - The process is more environmentally friendly and offers outstanding corrosion resistance - Costs are significantly lower Technical data: Chamber dimensions: approx. 1600 mm diameter and approx. 900 mm height Type: PVT 1600 SLC Manufacturer: PVT GmbH Dsdpfxsyzdm Rs Acwsur Year of manufacture: 1998/1999 Documentation: Available Control system: Allen Bradley PLC (automatic coating process including hardware)

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, PFEIFFER VACUUM "DUO 250" 250 m3/h 7.5 kW Used - fresh from the revision Pfeiffer VACCUM DUO 250 Condition: smoked replacement device Manufacturer: Pfeiffer VACUUM Type: DUO 250 Technical data: - 3 phases. - 7.5 kW power. - 960 rpm - Voltage 230/400V - Volume 250 m3/h - Weight 360kg Technical information without guarantee For details, please refer to the type plate - see picture There are other vacuum pumps, vacuum systems, Edwards Booster EH1200 Roots piston vacuum pump for sale Duedpfx Acjyzdmqewer

Condition: refurbished (used), functionality: fully functional, Offered here is an Edwards EH 1200 Booster vacuum pump. The pump was no longer used after its overhaul. Duedpeyzdmkofx Acwjr

Condition: good (used), Manufacturer: APD Type: 12 SC Delivery capacity: 3600 l/s Max vacuum: 5x10-6 Torr Ideal for high vacuum Dodscwrn Ejpfx Acwsur

Condition: used, mileage: 211,000 km, power: 169 kW (229.78 HP), first registration: 11/2016, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space volume: 4 m³, Year of construction: 2016, Equipment: ABS, electronic stability program (ESP), Manufacturer Mercedes Model Atego 1223 4x2 Euro 6 Cityflex 204 Year 2016 Condition Good Serial Number WDB96702810079651 Ref. nr. 747935 Reg. date: Last seen: Hk: 230 Km: 211000 Gearbox: Automatic Eurotype: 6 Duedjw Ruarspfx Acwer Diesel tank: 1 Tank liter: 200 L Rear view camera: ? Air conditioning: ? Radio: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 245/70R17,5 Cover% left 30 - 70 % Front suspension: Springs Suspension rear: Air Wheelbase: 3620 mm Toolbox: ? Hydraulic system: ? Total weight: 11990 Kg Net weight: 7080 Kg Load capacity 4910 Kg Manufacturer: Hvidtved Larsen CityFlex 204 Tank capacity: 4000L High pressure pump: Uraca P3-10 High pressure capacity: 127 l/min - 160 bar High pressure pump hours: 403 High pressure hose: 3/4" 50m + 1/2 60m Vacuum pump: Jurop RV 360 Vacuum capacity: 10,200 l/min Vacuum pump timer: 335 Vacuum hose: 4" Bottom suction + 3" Top suction Remote control: ? Water heater: Webasto Thermo 50

Condition: used, mileage: 6,348 km, power: 140 kW (190.35 HP), first registration: 08/2004, fuel type: diesel, Year of construction: 2004, Manufacturer Case Model MXM190 / Samson Vacuum Cleaner 8000 L Year 2004 Condition Good Serial Number ACM231045 Ref. nr. 8084 Reg. date: Hk: 190 Djdpfoynq Dbex Acwsur Hour: 6348 Gearbox: Full powershift 19+6 Diesel tank: 1 Tank liter: 400 L Radio: ? Air seat: ? Disc brake: Wet brakes Tire Size: 600/65R25 + 650/75R38 - 520/70R34 Cover% left 60% 90% - 40% Toolbox: ? Hydraulic system: ? Manufacturer: Samson Tank capacity: 8000 L High pressure pump: 2 x HPP High pressure capacity: 122 l/min - 130 bar Vacuum pump: Samson Remote control: ?

Condition: used, mileage: 961,000 km, power: 294 kW (399.73 HP), first registration: 12/1999, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, gearing type: semi-automatic, emission class: euro2, Year of construction: 1999, Equipment: ABS, soot filter, Manufacturer Mercedes Model Actros 4140 8x4 KOKS MEGAVAC 8000 ADR 13.500 l. Rustfri stål Tørsuger Year 1999 Condition Good Serial Number WDB9523171K400980 Ref. nr. 547977 Reg. date: 12/31/1999 Hk: 400 Km: 961000 Gearbox: EPS 3 pedal automatic Eurotype: 2 + Particulate filter Diesel tank: 1 Tank liter: 500 Radio: ? Drum brake: ? ABS: ? Engine brake: ? Tire Size: 385/65 - 385/65 - 315/80 - 315/80 Cover% left 50 - 50 - 40 - 40% Front suspension: Springs Suspension rear: Springs Rear axle, hub reduction: ? Toolbox: ? Hydraulic system: ? Total weight: 32000 kg. Dodpfxexpl S Us Acwjur Net weight: 23200 kg. Load capacity 8800 kg. Manufacturer: KOKS Tank capacity: 13590 l. Vacuum pump: DEMAG - WITTIG SLS34 Vacuum pump timer: 15043

Condition: used, loading : max. 2.800 kg (depending on the product) Dujdpoyx Tl Dofx Acwer all stainless steel vacuum pump not included suitable for cooling PLC control adjustable speed tilting system to discharge 1 water filter dimensions (l x w x h) : ± 3.490 x 1.820 x 2.250 mm power: 5,9 kW

Condition: used, Used machine Djdpfewwxykex Acwjur Compact machine for processing molded parts Processes edge material coated with hot-melt adhesive, which is reactivated by hot air Automatic workpiece feed is achieved by pressing the workpiece against the central, driven pressure roller, ensuring uniform adhesive reactivation and consistent bonding reliability Thermostatic temperature control via analog thermostat Maintenance-free three-phase hot air blower for continuous operation Automatic airflow redirection Pneumatically operated roller separating device cuts even the toughest veneer and PVC edges Foot switch for molded part processing Workpiece thickness: 10 - 50 mm Heating output: 3 kW Connection load: 3.3 kW Minimum workpiece width: approx. 25 mm Edge thickness: approx. 0.5 - 1 mm Minimum internal radius: approx. 25 mm Feed rate: 4 m/min Pneumatic system: 6 bar Weight: approx. 105 kg Availability: short-term Location: Röllbach

Condition: ready for operation (used), Year of construction: 2002, Band saw, Industrial Band saw, Behringer HBP 220, Used Machine Manufacturer: Behringer Model: HBP 220 Year: 2002 Weight: 1120 kg Dsdpfx Ajtlq Axocwour Dimensions: 2350 x 1250 x 1850 mm Cutting Range: 220x230 mm Hydraulic clamp Electrical Data: 1.5 kW; 50 Hz; 6 A Ready for operation

Condition: good (used), Year of construction: 1985, functionality: fully functional, year of last overhaul: 2012, BEHRINGER HBP650A Bandsaw Dedpeylbf Rsfx Acweur !ON-SITE SALE! !You are welcome to inspect the machine under power at its current location! Manufacturer: BEHRINGER Model: HBP 650 A Year of manufacture: 1985 / Fully overhauled in 2012 Technical Data Cutting range: 650 mm Min. cut-off length: 10 mm Cutting speed: 17 to 100 m/min Coolant capacity: 200 L System/band tension pressure: 80 bar Main drive motor power: 7.5 kW Hydraulic pump motor power: 2.2 kW Coolant pump motor power: 0.12 kW Chip conveyor motor power: 0.09 kW Total connected load: 18 kW Saw blade dimensions: 8800 x 54 x 1.6 mm Dimensions Length x Width x Height: 4320 x 2290 x 2740 mm Weight: 6500 kg

Condition: new, functionality: fully functional, fuel type: electric, color: red, brakes: other, driver cabin: other, gearing type: other, emission class: none, suspension: other, Year of construction: 2026, Equipment: cooling unit, low noise, TICAB Electric Street Cleaner CITY ANT – Municipal & Urban Cleaning Machine The TICAB CITY ANT is a battery-powered electric street vacuum cleaner and street sweeper for urban cleaning, sidewalk and road maintenance, park and plaza cleaning, airport and industrial surface debris removal. Equipped with a 240 L waste container, 2.5 m suction hose, and powerful hydraulic vacuum system, it removes leaves, gravel, sand, litter, bottles, and cans efficiently. Compact, self-propelled, quiet (~64 dB), and emission-free, it is perfect for municipal services, contractors, cleaning companies, and facility managers. Contact us for price, delivery, and technical details. Dujdpsx U Sfhjfx Acwer

Condition: used, Drehschieber-Druck-/Vakuumpumpen, trockenlaufend / Rotary vane pressure/vacuum pumps, oil-free Druck- & Vakuumpumpe / Pressure & Cacuum Pump Becker DVT 3.100 Baujahr / Year 2013 - Serial-No. D 2760035 Dedpfx Aceyx H I Eeweur Volumenstrom 50 Hz / Volume flow 50 Hz 103 m³/h Leistung 50 Hz  /Power 50 Hz 5,5 kW Schallpegel 50 Hz / Noise Level 50 Hz    76…77 dB(A) Gewicht / Weight +/- 95kgs Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2013, Band saw, Semi-automatic saw, Metal saw, Metal band saw, Frame metal saw Toptech / Optimum GB 4240, Used machine Dodpfx Acom Akwzjweur Manufacturer: Toptech / Optimum Type: GB 4240 Year/month of manufacture: 2013/06 Inclusion dimensions: 2200 x 1100 x 2000 mm Electrical data: 400 V / 50 Hz / 4 kW Tape size: 34 x 11 x 4320 mm Belt speed: 19-86 m/min - Hydraulic vise - Adjustable feed Material size: 400 x 400 mm

Condition: ready for operation (used), Air distribution system, Air Center Elmo Rietschle – Used equipment Overall dimensions: Length: 1000 mm Width: 700 mm Dsdpfx Aew Au Twecweur Height: 2170 mm Electrical data: 400V; 5.5 kW; 2900 RPM Vacuum pumps: Gardner Denver 2x Type: SAH 235 Pressure range: +650 to -470 mbar Max airflow: 240 m³/h

Year of construction: 2023, condition: used, Make: H2O, Model: Vacudest XS Clearcat, Year of manufacture: 2023, Max. treatment capacity: 300 m³/year, Machine control with Vacutouch touch display, 5 IBC tanks, 3 IBC drip trays, manufacturer: CHEMO, year: 2023, capacity: 1,100 l, CIP system, piping, pump, operating hours: 4,868. Dedoyx Excepfx Acwsur

Condition: like new (used), For sale is a used Record Power band saw BS 300 E with a cutting width of 305 mm. The saw is in nearly new condition and has been reconditioned and inspected by our professional staff. (Fully functional) Dujdpsyx Dalsfx Acwsr Technical data: - Cutting height: 190 mm - Cutting width: 305 mm - Saw blade length: 2370 mm - Blade width: 8-15 mm - Table tiltable 90-45° - Includes base with wheels The band saw is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: band saw, saws, saw, band Reference: R-AT0EF

Year of construction: 1988, condition: good (used), band saw MEGA BS360 with hydraulic max 360mm cutting hydraulic clamping vice automatic lifting, feed regulation Dedpfxehk S Urj Acwsur coolant pomp

Condition: used, Bandsaw Bomar 450SL. In good condition, documentation included. Can be tested in Kaunas. Specification: Model. Dedsqk U Rropfx Acwsur Bomar 450 450 Bomar 450 Bomar 450 Bomar 450 Bomar 450 Bomar 450 Bomar 450.

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Duedpsxy Tm Iefx Acwor