Used Vacuum Band for sale (8,198)

Condition: new, Year of construction: 2025, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability, is equipped with an automatic blade tension sensor. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Weight 215 kg Angle Dodpfx Aoudi Unsf Ijcn 0º ø220 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Condition: refurbished (used), We offer you a used refurbished vacuum pump Leybold Screwline SP 250. Dcodpfxjurkrfo Af Ion

Condition: used, mileage: 208,266 km, power: 159 kW (216.18 HP), first registration: 10/1983, overall weight: 22,000 kg, fuel type: diesel, axle configuration: 6x4, maximum load weight: 8,160 kg, empty load weight: 13,840 kg, wheelbase: 3,600 mm, brakes: engine braking, driver cabin: other, gearing type: mechanical, emission class: euro3, loading space volume: 10 m³, operating hours: 2,876 h, number of seats: 3, Equipment: cabin, * German vehicle * 1st owner * Previously owned by a municipal authority * Complete documentation available * Various work videos available Djdpfxow Hz Shs Af Iscn * Kanal Müller high-pressure vacuum jetting unit * 10,000-liter tank * Movable extension piston * Suction hose on hydraulic adjustable boom * Rear hose reel with 100 m 1-inch high-pressure hose * Small hose reel with 1/2-inch high-pressure hose, 30 m * Front high-pressure spray system * Uraca high-pressure pump * Type KD 615-G * 317 liters/minute * Demag Wittig vacuum pump * Type KD 164 VR * 880 m³/hour * Vacuum pump operating hours: 2,876 * High-pressure pump operating hours: 3,917 * Hose trays and storage compartments left and right * Large cab with 3 seats * Rotating beacons * 8-speed manual transmission * Work lights * Wheelbase: 3.60 m + 1.40 m * Leaf spring suspension * Gross vehicle weight: 22,000 kg * Empty weight: 13,840 kg * Payload: 8,160 kg * Self-propelled work machine, toll-exempt and permitted in all environmental zones If a new TÜV inspection is required, we would be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, WITHOUT new DGUV, WITHOUT new SP, and WITHOUT new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend inspection and testing of the item in order to avoid misunderstandings regarding its condition and suitability. Viewing and testing are possible at any time by appointment and are expressly desired. All statements are without guarantee. We do not accept liability for errors or incorrect information in the offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors. - .

Condition: used, 250 L. hopper filling portioning control with twister and tube casing holder Dedjxg Du Aspfx Af Iecn PLC control 7,9 kW 3 x 400V, 50 Hz dimensions (L x W x H): ± 2.100 x 1.300 x 3.100 mm + built-in loader for eurobins of 200 L

Condition: like new (used), Year of construction: 2016, machine/vehicle number: 306533, Machine Specifications Technical Specifications Machine length: approx. 1850 mm Machine width: approx. 1200 mm Machine height: approx. 2300 mm Machine weight: approx. 550 kg Dcodpfxjwm Du Es Af Ijn Idler pulley diameter: 630 mm Tool dimensions: 13 x 0.65 x 24 TPI Saw blade length: 4700 mm Loading height: 1065 mm Cutting height: 350 mm Cutting width without width stop: approx. 610 mm Cutting width with stop: 150 mm Motor power: 0.75 kW Cutting speed: 10 - 100 m/min Table travel: approx. 600 mm Table feed speed: 0.03 - 0.3 m/min Extraction connection diameter: 1x Ø 120 mm + 1x Ø 100 mm Required flow velocity: min. 25 m/s Required volume flow: 1725 m³/h Electrical connection Operating voltage: 400 volts / 50 Hz Current type: 3 x 400 volts Fuse protection: max. 16 amps Minimum cross-section: 1.5 mm²

Condition: used, Used Dodpfx Aswhnqysf Ijcn Refurbished 1-year warranty New electric motor, mineral oil included 5.5 kW motor 1.7 amps/1450 rpm - 1 rpm Measured ultimate pressure: 1.5 x 10-2 mbar With gas ballast: 2 x 10-1 mbar

Condition: new, Year of construction: 2025, The CORMAK BS 260G band saws, due to being equipped with a hydraulic cylinder, a cooling and an arm swivelling up to 60°, together with blades from renowned German Röntgen company, are used commonly in ironworking where precision, quality and cutting speed are important. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or by any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Machine's arm is made of profiled CAST IRON. Control panel is located by the arm. The drive from the electric motor directed to the cutting band driving wheel is transmitted by a motor with worm drive. The cutting band is tensioned on two cast iron wheels with a manual tightener and guided by adjustable rolling and linear set of carbide guides. A separate flood coolant container with an electropump is inside. The arm lowering speed (the cutting speed) is adjusted with a hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 36 and 72 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Cutting band saw dimensions 2455×27×0.9 mm Band tension mechanical (manual) Band speed 36, 72 m/min Feed speed 0–50 m/min (stepless feed) Arm lowering control stepless – hydraulic cylinder Vice base height 900 mm Power supply 3-phase 400V Motor power 1.1 kW Weight 216 kg Warranty 12 months Manual yes CE declaration yes Angle Djdpovuf S Nofx Af Iecn 0º ø230 260×150 225×225 45º ø165 180×130 165×165 60º ø105 100×90 110×110 *Please note that machine is sold without CEE connector by default, since there are many different types of it. If you would like to receive it with the machine, please write it to the seller before making a purchase/during order proceeding.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 4,000 mm, overall weight: 820 kg, load capacity: 500 kg, The offer concerns the following set: (Options available: customization of device parameters or separate purchase of vacuum lifter or crane) - Vacuum lifter for panels, suitable for handling panels such as MDF, laminated, raw, particle boards, etc. (model GLASS SYSTEM DS 250) - Stationary jib crane - Electric chain hoist - Manual travel trolley Features of the GLASS SYSTEM DS 250 vacuum lifter: - Designed for panel handling - Actuator for vertical-horizontal tilting - 6 suction pads Ø 200 mm - Construction allows for adjustment of suction pad positioning to adapt to transported materials Dedpexln Drofx Af Iscn - Traverse length: 2500 mm - Each suction pad equipped with a ball valve for individual control - Compressed air impulse application prevents the material from sticking - Individual X and Y axis adjustment of each suction pad - Control of the lifter from the operator console (control panel): - Main unit on/off - Vacuum suction/release - Electric hoist operation via thumb control – lifter up/down - Pressure gauge - Powered by compressed air – integrated vacuum generators - Lifting capacity: 400 kg - Device weight: 100 kg - CE certificate Stationary jib crane Technical data: • Column height: 4 m • Height under arm: 4 m • Arm length: 4 m • Lifting capacity: 400 kg • Slewing range: 270 degrees • Lifting speed: approx. 3m/min • Color: any RAL color upon request • Manual slewing • Manual travel trolley • Quadruple/double needle bearing arm for smooth rotation • Electric chain hoist • CE certificate INCLUDED IN THE PRICE: • Pillar jib crane • Single-phase electric hoist • Manual travel trolley • CE certificate • Complete documentation Standard warranty: 12 months

Condition: good (used), Year of construction: 2013, operating hours: 100 h, functionality: fully functional, Centrifugal casting furnace, casting of nickel-based alloy or Gamma-Ti possible, melting capacity max. 10kg, for turbines and blade production, joints Please contact us for further information and documentation. Dcodpfxovalryj Af Ien

Condition: ready for operation (used), Ruwac Model DS 1220 M-B1 Industrial Vacuum Cleaner No. 733 Manufacturer: Ruwac Model: DS 1220 M-B1 Weight: approx. 120 kg Power: 2.2 kW Explosion protection: Yes Dust Class: M You are welcome to schedule a viewing appointment. We can also arrange cost-effective shipping for you. You will receive a proper invoice. For international customers, a net invoice can be issued. The prerequisite for this is a valid VAT identification number. Subject to prior sale. Visit our shop and check out our other offers. The mentioned company names and trademarks are property of their respective owners and are used for identification and description purposes only. Dcjdpfx Asxlnnqef Ion Technical data may deviate, and errors in the item description are possible and reserved.

Year of construction: 2015, operating hours: 3,337 h, condition: ready for operation (used), General Data Measurements width 2330 mm Measurements depth 2360 mm Measurements height 1850 mm Machine weight 2500 kg Main Drive Spindle motor power 6 kW Number of axis 2 Additional Equipment Dedpsxgwd Dofx Af Iocn Saw Band: 5090 x 34 x 1.1 mm This KASTO Win A 3.3 was manufactured in 2015. A robust metal band saw, it features a 6 kW drive, operates on 400V/50 Hz, and handles a cutting speed of 12-150 m/min. The saw band measures 5090 x 34 x 1.1 mm, and it includes a 120-liter coolant system with a chip conveyor. Ideal for cutting dimensions up to 330 mm in height and 350 mm in width. Contact us for more information about this machine. Application Types Sawing

Condition: refurbished (used), functionality: fully functional, -Very good condition -1. year operating time after revision -Digital analog control with RS232 interface. Dedpsuq A Agsfx Af Iocn The recommended price is 6,000.00 EURO. The associated control unit is 800.00 EURO.

Condition: used, mileage: 61,141 km, power: 346 kW (470.43 HP), first registration: 10/2022, overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, loading space volume: 13 m³, total width: 2,550 mm, total height: 3,600 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ BUY ++ Internal number: #126 MAN TGS 28.470 6x2 BL Wiedemann enviro tec Super 1000 , suction cup + reel Superstructure * Wiedemann enviro tec * Super 1000 * 13,500 liter tank size * 1,500 liter water chamber * 12,000 liters of waste water * Emptying by tilting the tank 45° Vacuum system * Jurop PR250 * 1,470cbm/h 48kW * Galvanized piping in DN 125 High pressure system * Speck P25/70-140 approx. 70 liters/min at 140 bar * Hydraulic flushing hose reel with approx. 80m DN 13 Special features Dcedpfx Afsxlmtxj Ijn * Sludge tank made of material 1.4301 * Warm hand washing device * Stainless steel tool box * Control cabinet with display * Motor - start can be switched from the control cabinet * NMV - start switchable from control cabinet * Radio remote control * Equipment cabinet with flaps * Hose storage * Sound enclosure of the pump room raised * LED working lights * Central lubrication system Chassis * MAN * TGS 28.470 * 6x2 BL * 460PS/335KW * EURO 6 * 385/55 R 22.5 STEERING-NEAR TL 160&K * 315/70 R 22.5 CLOSE-IN TL 154/150&K * 385/55 R 22.5 STEERING-NEAR TL 160&K * Halogen rotating beacons * Air conditioning Technical data * Unladen weight 14,340 KG * GGW 26,000 KG * Length 9,300 mm * Height 3,600 mm * Width 2,550 mm For more detailed information and/or pictures, please contact us directly. You can find a large selection of other vehicles to BUY or RENT under: Subject to changes, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods. The sale is subject exclusively to our general terms and conditions and to the exclusion of any warranty.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: DS550 CA, overall weight: 50 kg, load capacity: 400 kg, VACUUM LIFTER PANEL SYSTEM DS550 CA Compact vacuum device for sandwich panels, ideal for wall installation. Its construction allows it to fit even in the trunk of a passenger car. The lifter is additionally equipped with a rotator, enabling 360° rotation of the panel. Available with radio control, manual operation, and a single-circuit version. Weight of the device: 50 kg Djdjwutibopfx Af Iecn Lifting capacity: 400 kg Control - radio/manual Power supply - external battery (DeWalt - one included, with charger) Battery charge indicator: Yes Mounting position: vertical/horizontal Vertical wall mounting: Yes Number of suction pads: 1 Material length: 1-8 m

Condition: used, mileage: 212,222 km, power: 316 kW (429.64 HP), first registration: 09/2002, overall weight: 32,000 kg, fuel type: diesel, axle configuration: > 3 axles, gearing type: mechanical, Very well-maintained DAF CF85.430 8x4 suction and jetting combination truck with a premium Cappellotto Cap Combi body, featuring remote control, a boom, a Wittig Aqualine 3200 vacuum pump, and a URACA high-pressure pump. • Cappellotto Cap Combi • Sludge compartment: 13,000 liters • Fresh water tank: 4,000 liters Dsdpfx Afsxlmq Rj Ijcn • Street washing system (bar) • WITTIG Aqualine 3200 vacuum pump • URACA high-pressure pump P3-45, 175 BAR, 400 liters/min • Pump operating hours: 1,850 • Remote control included! • Swiss truck in top condition • Differential locks • Radio • Switches • 8x4 drive axles • Financing available through our partner banks – we are happy to assist you. Please note that we reserve the right to prior sale as this item is also listed on other platforms. Accessory details are provided without guarantee. Subject to changes, prior sale, or errors. We explicitly offer and strongly recommend an inspection and verification to avoid any misconceptions regarding condition or suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged.

Condition: ready for operation (used), Ruwac Model DS 1222 H Industrial Vacuum Cleaner Manufacturer: Ruwac Type: DS 1221 H Dcsdpfx Aexlngyef Ijn Weight: approx. 115 kg 2.2 kW EX Zone 22 Class: H You are welcome to arrange a viewing appointment. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, subject to providing a valid VAT ID number. Subject to prior sale. Visit our shop to view our other listings. All brand names and trademarks are the property of their respective owners and are used solely for identification and description of the products. Technical data may vary and errors in the item description are possible and reserved.

Condition: used, mileage: 138,969 km, power: 110 kW (149.56 HP), first registration: 11/2005, overall weight: 7,490 kg, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro3, Year of construction: 2005, number of seats: 3, Equipment: ABS, Equipment: * Body/Superstructure: box body with side door and tailgate, * MOSA GE 20 PSX generator, * AC11 l compressor, * Preparation for high-pressure pump via power take-off, * Roof hatch (steel), * Center seat with seatbelt, * Rotating beacons, Other details: Dedjp Nfrropfx Af Ijcn * Axle configuration: 4x2, * Suspension: leaf/leaf, * Engine: 4.3 L – 110 kW diesel (OM 904 LA), * Wheelbase: 4,220 mm, * Permissible total weight: 7.49 t, * Registered as self-propelled working machine, Since 1972, your reliable partner for automobiles/commercial vehicles in 28832 Achim at Bremer Kreuz. NutzfahrzeugZentrum Behnke always has around 200 vehicles from the sectors of vans, commercial vehicles, and construction machinery in stock! We continuously offer you attractive financing options at special discounted rates. If interested, we will be happy to prepare an individual offer for you! Trade-in of your commercial vehicle/construction machinery is welcome. If a new TÜV inspection is needed, we will be happy to provide an offer from one of our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. Delivery of your "new" commercial vehicle can be arranged with our external partners for an additional charge. The information provided in advertisements, online, on price tags, and in images is non-binding and does not constitute warranted characteristics. The seller assumes no liability/guarantee for typing or transmission errors. Listed equipment may need to be verified separately. Subject to prior sale and errors.

Condition: used, Year of construction: 1988, saw band length 3.000 mm max. workpiece height 215 mm table-size 605 x 605 mm cutting speed 12 - 750 m/min transmission ratio 4 throat 410 mm turning speed range 39 - 2.460 U/min total power requirement 2 kVA weight of the machine ca. 0,6 t dimensions of the machine ca. 2,0 x 2,0 x 2,5 m Bandsaw MÖSSNER - Rekord SM 420 - Operating Hours: 2.651 h - Table swivable - incl. replacement saw blades: 1x 30,000 x 13 x 0.65mm Dcjdjxgu Iyopfx Af Ion 4x 30,000 x 6 x 0.65mm 1x 15m (6H) 13 x 0.9mm 1x 15m (10H) 13x 0.9mm

Condition: used, Year of construction: 2018, functionality: fully functional, volume flow: 10.2 m³/h, input voltage: 230 V, USED VACUUM PUMP Technical data Max. pumping speed 50 Hz (mbar) 8.9 m3/h Max. pumping speed 60 Hz (cfm) 6.0 cfm Ultimate vacuum 2 x 10-3 mbar / 1.5 x 10-3 torr Ultimate vacumm with gas ballast 1 x 10-2 mbar / 0.75 x 10-2 torr Ultimate partial vacuum without gas ballast 4 x 10-4 mbar / 3 x 10-4 torr Water vapor tolerance 40 mbar / 30 torr Number of stages 2 Permissible ambient temperature range (operation) 15 - 40 °C Permissible ambient temperature range (storage) -10 - 60 °C Max. outlet pressure (abs.) 1.1 bar Dcsdjw Rqx Djpfx Af Ion Oil capacity min./max. 0.45 / 0.85 l Inlet connection small flange KF DN 25 Outlet connection small flange KF DN 25 Rated motor power 0.30 kW Rated speed 50/60 Hz 1500/1800 min-1 Protection class IEC 60529 IP 40 Dimensions (L x W x H) 503 mm x 156 mm x 240 mm Weight 24.8 kg Noise (sound pressure level) in dBA at 50 Hz or 1500 rpm/62% (VARIO)/1500 rpm (VARIO-SP)/12500 Upm (VACUU·PURE®) - 52 dBA NRTL certification - No

Year of construction: 2002, condition: excellent (used), machine/vehicle number: 10434, Product number: 2537UL Type: KU200V Serial number: 10434 Year of construction: 2002 Bowl: 200 litres Dsdpfx Aoikvmnof Iocn Compressed air: 6 Bar Power: 3 x 400V, 50Hz, 114kW Dimensions: 3250 x 3800 x 1700 mm Weight: 4000 kg Variable speed on knife shaft, 4 speeds on bowl, 1 mixing speed backwards Temperature indicator With loader and unloader for 200 litre tote bins Including Busch RA160D vacuum pump

Condition: used, mileage: 297,830 km, power: 331 kW (450.03 HP), first registration: 04/2020, overall weight: 32,000 kg, fuel type: diesel, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, Equipment: had accident, Suction and jetting combination unit by Swiss bodybuilder Kaiser, model Twister Komfort. The vehicle has damage on the left side; engine, transmission, and superstructure are functional. - Kaiser Twister Komfort - Tank material: Stainless steel V2A Dcsdpfxjxlmrbo Af Isn - Sludge chamber: 14 cbm - Fresh water chamber: 2.5 cbm - Vacuum pump: Kaiser KWP 3100i - High-pressure pump: Patissoli KF 30 approx. 106 l/min 200 bar - Radio remote control - Suction boom - EURO 6 - Automatic transmission with clutch pedal - Additional pictures or videos can be provided on request. - Accident damage on the left side - Financing available through our partner banks—we are happy to assist you. We expressly reserve the right to prior sale, as this item is also advertised on other platforms. Accessory information provided without guarantee. Subject to change, prior sale, or mistakes. We offer and strongly recommend viewing and inspection to ensure the buyer has an accurate understanding of the condition and suitability. Viewings and inspections are possible at any time by appointment and expressly encouraged.

Condition: new, Year of construction: 2025, Roller diameter: 640 mm Stand projection: 620 mm cutting depth: 400mm table tiltable: yes -0 to + 15° Table size: 870 x 620 mm Dcodpsgtdpmjfx Af Ion belt speed: 1660m/min Motor power: 2,2 kW / 400V Motor brake: yes / automatic Suction connection: 2 x 120mm Machine length: 1190 mm Machine width: 780 mm Machine height: 2063 mm Weight: 320 kg

Condition: new, carrying capacity 250 kg number of suction cups 6 suction cup dia. 215 mm Vacuum lifter VH 6-250 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm Dsdpfjnlb Rwsx Af Iecn - 6x Springy, articulating and adjustable suction cup holders - 6x suction cups Ø 215 mm, the seal can be separated in case of wear whose metal supports can be changed inexpensively and without tools - 6x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: * with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. * is routed to the lifting device next to the load chain. - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Integrated into the control with isolating transformer (necessary if the vacuum lifter is connected via the crane trolley and this has no neutral conductor) - Operating handle can be extended to 1,000 mm from the center of the traverse. Sturdy sheet metal bag for your crane control incl. at no extra charge. - Operation "suction / release" using manual slide valve: The wear-free and very robust manual slide valve ensures safe Suction and release after pressing the release button. (twice loosening according to EN 13155) - Control and safety device for vacuum lifters: * Robust control box. * Contactor circuit for the vacuum pump. * Safety warning device with audible alarm. * Vacuum gauge with danger zone indicator. * Large vacuum storage tank with safety check valve * Double actuation when releasing the load. - Fine dust filter to protect the vacuum pump - Detailed and easy to understand documentation. One year warranty against material and manufacturing defects One-shift operation (without wearing parts). Initial test UVV 18, VBG 9a with CE declaration of conformity - according to EN 13155 - Packing for truck transport.

Condition: new, carrying capacity 1000 kg number of suction cups 8 suction cup dia. 280 mm Dcjdpfx Afenlb Rzs Ion Vacuum lifter VH 8-1000 for the horizontal transport of smooth, dry and airtight panels. Robust supporting structure made of steel, painted in RAL 2000 with low Own weight. consisting of: - 1x galvanized longitudinal beam with a length of 2,400 mm - 4x galvanized crossbeams with a length of 1,000 mm - 8x Springy, articulated and adjustable suction cup holders - 8x suction cups Ø 280 mm, in case of wear the seal can be separated whose metal supports can be changed inexpensively and without tools - 8x ball valves to switch off individual suction cups, thus also smaller formats can be lifted without having to move suction cups or traverses. - 1x spiral connection cable small helix: * with an extension length of 3,500 mm, designed as an extension cable with CEE plug and coupling. * is routed to the lifting device next to the load chain. - Low-maintenance, very high-quality, oil-lubricated rotary vane vacuum pump with a Suction power of 21 m³/h and an ultimate vacuum of 98% (20 mbar). - Electrical connection: 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) and CEE plug (16 A). Integrated into the control with isolating transformer (necessary if the vacuum lifter is connected via the crane trolley and this has no neutral conductor) - Operating handle can be extended to 1,000 mm from the center of the traverse. Sturdy sheet metal bag for your crane control incl. at no extra charge. - Operation "suction / release" using manual slide valve: The wear-free and very robust manual slide valve ensures safe Suction and release after pressing the release button. (twice loosening according to EN 13155) - Control and safety device for vacuum lifters: * Robust control box. * Contactor circuit for the vacuum pump. * Safety warning device with audible alarm. * Vacuum gauge with danger zone indicator. * Large vacuum storage tank with safety check valve * Double actuation when releasing the load. - Fine dust filter to protect the vacuum pump - Detailed and easy to understand documentation. One year warranty against material and manufacturing defects One-shift operation (without wearing parts). Initial test UVV 18, VBG 9a with CE declaration of conformity - according to EN 13155 - Packing for truck transport.

Condition: new, cutting diameter 240 mm saw band length 2730 mm cutting width 270 mm cutting speed 37 + 74 m/min dimensions of saw-band 2730 x 27 x 0,90 mm 240 mm 230 mm 270 x 230 mm 210 mm 200 mm Dcedpfohhzl Hjx Af Ijn 200 x 210 mm 130 mm 130 mm 130 x 160 mm total power requirement 1,2 kW weight of the machine ca. 0,3 t dimensions of the machine ca. 1,6 x 1 x 1,7 m high-quality processed metal band saw with 2 band speeds, miter up to 60°, automatic cooling and AutoCut feed system - for sawing solid material and profiles execution * High-quality processed and equipped metal band saw for saw cuts best quality * For sawing solid material and profiles made of steel, stainless steel and aluminium * Miter cuts up to 60 degrees left * Saw band speed adjustable in 2 stages * Frame and gearbox made from one piece, very quiet and low-vibration cut * Easy, clear miter adjustment with scale * Quick release vice with quick release lever for easy handling * Length stop * Carbide saw band guide * Electrical monitoring of band tension, band breakage and saw band cover. The saw only runs if there is no fault in the monitoring system. * Ergonomic industrial handle * Electric automatic coolant control * AutoCut system with hydraulic cylinder, feed control, spring pack and limit switch * Large machine bed * Machine base in sheet steel construction with front door AutoCut system * Automatic saw frame lowering via the hydraulic cylinder continuously adjustable feed and limit switch at the end of the cut. * High-speed lowering of the saw frame from the rest position to the workpiece, then switch to normal saw feed (e.g. for scribing). * Manual operation: The hydraulic cylinder works as a brake cylinder (e.g. for release). Due to the brake cylinder, the saw can be moved in any Position to be positioned.