Used Used Power Cable for sale (67,823)

Condition: used, SincoTec Model: POWER FLOW BIAXIAL 125/150 kN ±4000 Nm SincoTec POWER FLOW BIAXIAL 125/150 kN – ±4000 Nm Servo-hydraulic Test Stand Description: For sale is a servo-hydraulic biaxial test stand SincoTec POWER FLOW BIAXIAL. The unit has been used in an industrial environment and was fully functional up to decommissioning. All service and maintenance were professionally performed. Comprehensive technical documentation (operating, assembly, and wiring manuals) is available. The test stand is suitable for tensile/compression tests, torsion tests, and combined loading tests on components and assemblies, e.g. for fatigue, durability, and functional testing. Main technical data for the test stand: - Maximum test force (design): up to ±150 kN - Typical operating rating: 125 kN - Max. torque (torsion): ± 4,000 Nm - Max. linear cylinder stroke: ± 75 mm - Max. rotation angle: ± 50° - Measurement accuracy: Class 1 (DIN EN 10002-3) Test stand dimensions: - Total height: approx. 3,430 mm Iedpfx Akex H Rtnsxeia - Width: approx. 1,480 mm - Depth: approx. 1,180 mm - Max. weight of clamping fixture: 250 kg Hydraulic power unit (included) - Drive power: approx. 152 kW - Flow rate: approx. 260 l/min - Operating pressure: up to 280 bar - Hydraulic oil: HLP ISO VG 46 - Tank capacity: approx. 1,500 liters Power unit dimensions: - Length: approx. 2,714 mm - Width: approx. 1,820 mm - Height: approx. 2,085 mm Electrical data: Control cabinet / test stand - 400 V / 50 Hz - Connection: CEE 5-pin - Fusing: 16 A Hydraulic power unit - 400 V / 50 Hz three-phase current - Direct connection - Fusing: approx. 160 A Scope of delivery: - SincoTec POWER FLOW BIAXIAL servo-hydraulic test stand - Hydraulic power unit - Control cabinet with industrial PC - Measurement and control technology - Technical documentation The machine is structurally rated for up to 150 kN. The 125 kN specification refers to the typical operational configuration. Test stand weight: approx. 4.7 t Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) (Specifications subject to change and errors excepted!) Further questions can be answered by phone.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2011, operating hours: 44,500 h, laser source model: CV5000, TECHNICAL DETAILS Laser: CV5000 Ijdpfsx Hfcqox Akxjia MACHINE DETAILS Operating hours: 44,500 h Note: Information regarding the machine's layout can be found in the attached document.

Condition: excellent (used), Dr. Hönle Dr. Hönle UV Technology – Bluepoint LED High-Power + Bluepoint 2 easycure – Complete System incl. LED Spots & Manuals For sale is a complete UV curing system by Dr. Hönle, consisting of two control units and several LED spots. Ideal for professional applications in electronics manufacturing, medical technology, optics, plastics processing, and laboratory operations. Description: The system includes: - Bluepoint LED High-Power Control Unit (REF 45250.c) - Bluepoint 2 easycure Control Unit (REF 33900.a) - Several UV LED spots (e.g., 365 nm, air-cooled) - BP-LED 4-1 Adapter (REF 45970.a) – for controlling up to 4 spots - Original operating manuals + CD The units enable precise control of exposure time, intensity, and energy – ideal for reproducible industrial UV curing processes. Technical Data: Bluepoint LED High-Power (45250.c): - Power supply: 36 V / 5.5 A - Control for up to 4 LED spots - Adjustable UV intensity - Timing programs and energy measurement Bluepoint 2 easycure (33900.a): - 230 V AC, 50 Hz - 570 VA power consumption - High-performance LED control - Industrial quality, Made in Germany Total Dimensions/Weight: approx. 12–15 kg Important Note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (see photo) - Bluepoint LED High-Power - Bluepoint 2 easycure Iiodpfex E T Uxjx Akxsa - LED spots (air-cooled) - BP-LED 4-1 adapter - Operating manuals - CD - Original documentation (subject to changes and errors in technical data and information!) We are happy to answer further questions by phone.

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control, converter, controller Iodpfxjwt Rzlj Akxjia -Manufacturer: Power Automation, Servo Controller -Type: MI305 -Dimensions: 300/115/H250 mm -Weight: 3.8 kg/piece

Condition: used, This listing is for the Life Technologies Invitrogen Power Ease 500 Electrophoresis Power supply The unit is in full working condition and is ready for immediate release he Invitrogen PowerEase 500 is a high-performance, programmable electrophoresis power supply, specially designed for use with mini gel electrophoresis systems. It offers robust features tailored for precision, convenience, and safety in protein and nucleic acid gel electrophoresis applications. External Dimensions (W × D × H): 16.5 × 27 × 20 cm Weight: 2.9 kg (6.4 lbs) Features & Functionality Designed for Mini Gels: Optimized for use with mini gel electrophoresis setups. LCD Display: 240 × 128 pixel interface displaying real-time run data. Parallel Port Connectivity: Can be connected to most printers with a parallel port for printing detailed run logs. Run Data Logging: Displays number of gels, current, voltage, power, and temperature during operation. Pre-Programmed Modes: 8 pre-set methods specifically for Novex™ gels 4 user-defined custom methods Multiple Gel Support: Up to 10 Tris-Glycine gels (5 mini-cells) Iodpfxexv A N Re Akxsia Up to 2 NuPAGE™ gels (1 mini-cell) Up to 6 NuPAGE™ Tris-Acetate gels (3 mini-cells) Control Modes: Constant voltage, constant current, and constant power modes. Safety Protections: Open/short circuit, thermal overload, overvoltage, and overcurrent safeguards. Programmability: Stores up to 16 custom user protocols. Linear Voltage Ramp: Instantaneous voltage ramping capability. Optional Temperature Probe: Supports thermal shutoff with probe. Usage & Maintenance Tips Cold Room Usage: LCD may fade at low temperatures but returns to normal once warmed. Regular Cleaning: Prevent salt deposits by occasional cleaning. Safety: Avoid connecting/disconnecting leads while the high-voltage indicator is active.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, warranty duration: 19 months, type of cooling: water, welding current at 60% duty cycle: 400 A, welding current at 100% duty cycle: 370 A, welding current (min.): 30 A, welding current (max.): 400 A, For sale: OTC ARXIS P403L 30-400 AMP 400 Volt Water-cooled Pulse Double Pulse Low Spatter Synergic 2/4 Takt 4 Roller drive Iedpfx Aex Rciiokxeia Pre gas Post gas Start current End current Up slope Down slope Hot start Soft start Digital display Touchscreen Fixed programs Program memory Burnbacktime adjustable Steel – Stainless Steel – Aluminum – CuSi – CuAl – Inconel – Titanium weldable Including PRO5000 Welding Torch, Earth work lead with clamp, Gas cable, Interconnection hose, and 2 Years Factory Warranty. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: new, Year of construction: 2024, overall weight: 5,250 kg, fuel type: diesel, tank capacity: 800 l, color: red, power: 400 kW (543.85 HP), output current: 720 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 440 kW (598.23 HP), nominal power (apparent): 500 kVA, total length: 4,450 mm, total width: 1,600 mm, total height: 2,300 mm, rotational speed (max.): 1,500 rpm, motor manufacturer: DOOSAN, type of cooling: water, Diesel generator set 500 kVA Genset type: D500SXF Condition: New, 2024 Application: stationary Emission stage: unregulated Engine: Doosan DP158LD Generator: Meccalte ECO40-3S/4 Standby power (ESP): 550kVA/ 440 kW Prime power (PRP): 500 kVA/ 400 kW Continuous output (COP): 30 - 80% of the prime output Nominal voltage: 230/400 V Nominal frequency: 50 Hz Speed control: electrical Voltage regulation: electrical (AVR DER1) Soundproof (approx. 78 dB/ 7m, can be reduced to 55 dB at an extra charge), weatherproof Control voltage: 24VDC Mains form: TN-C Incl. control unit Incl. batteries (2 x 110Ah) Incl. integrated fuel tank (800 L) Incl. integrated drip tray for fuel and engine fluids Incl. documentation/manual Incl. circuit breaker (ABB, 4P) with undervoltage release Dimensions: 450x160x240cm LxWxH Dry weight: approx. 5,550 kg Running time of the fuel tank: - approx. 8 hours at 100% load 500 kVA, Consumption approx. 100 l/h - approx. 11 hours at 75% load 375 kVA, Consumption approx. 72 l/h - approx. 17 hours at 50% load 250 kVA, Consumption approx. 47L/hr. Warranty: 12 months or 2000 operating hours, whichever occurs first. You can configure your genset individually with us and order numerous individual options: - Socket outlet package 16A - 125A with RCD (all-current sensitive) - Remote control, - Insulation monitoring - Extended sound insulation, up to 55 dB/ 7m possible) - Fully automatic emergency power system with automatic mains/generator switchover available on request. - Mains parallel operation with load sharing and peak load (ComAP IG 1000 control unit VDE 4510 certified) - CHP version - NEA for indoor installation with air ducts, ventilation, etc. Isdpfxsfn Efxj Akxsia The pictures show a standard series unit with the corresponding output from our own production, completely ready for operation. Delivery nationwide possible for an extra charge. Contact us by e-mail or give us a call, we will be happy to advise you and make you a non-binding offer.

Condition: used, Year of construction: 2023, Opportunity to buy an outstanding fiber laser (Year 2023) with 6000x2000 mm working dimensions and 6000W laser output. Power on hours: 14500 Cutting hours: ca 4900 Can be inspected under power upon appointment. Availability: 03/2026 Iiodpfxexyxcuj Akxja More detailed information on request. X: 6320 mm Y: 2,200 mm Z: 150 mm Fiber laser source: 6000W Axis speed: 130 m/min (trajectory 180 m/min)

Condition: new, Year of construction: 2025, overall weight: 131 kg, fuel: super 95, fuel tank capacity: 3 l, Equipment: trailer coupling, The HS20288 log splitter from HZC Power offers an impressive splitting force of 20 tons and is ideal for splitting logs up to 600 mm long. Equipped with a robust 6.5 HP (208 cc) gasoline engine and a fast splitting cycle of 14 seconds, it enables efficient wood processing. The splitter operates horizontally and features two-hand operation for maximum safety. A trailer hitch allows for easy transport on private property. Furthermore, the integrated frame ensures secure support of the logs, making it suitable for both professional and home use. General Specifications: Manufacturer: HZC Power Model: HS20288 Splitting Force: 20 t Maximum Splitting Length: 600 mm Iodpfx Aowal Akjkxsia Splitting Cycle: 14 s Hydraulic Oil Capacity: 10 l (HLP46) Product Weight: 131 kg Shipping Weight: 150 kg Special Features: Trailer Hitch: For easy transport on private land Splitting Wedge/Cross Bar: Permanently mounted for effective splitting Working Position: Horizontal, ideal for working at low heights Two-Hand Operation: Increases safety by keeping both hands out of the splitting area Hydraulic System: High oil pressure of 270 bar for powerful splitting Oil Filter: Extends the service life of the hydraulic system Integrated Frame: Ensures secure hold of the split material Engine: Manufacturer: Jiao Model: Gasoline engine 6.5 HP Engine technology: Single-cylinder, 4-stroke, air-cooled, OHV Displacement: 208 cc Fuel tank capacity: 3.1 l Oil capacity: 0.6 l Engine weight: 16 kg Dimensions (W x L x H): 321 x 376 x 346 mm Performance features: Splitting force: 20 tons for powerful wood splitting Splitting length: Up to 600 mm for various log sizes Splitting cycle: Fast 14-second cycle for high working speed Two-hand operation: Increases safety by keeping both hands out of the splitting area at all times Hydraulic system: High oil pressure of 270 bar for powerful wood splitting Hydraulic oil: 10 l HLP46 for stable operation Oil filter: For a longer service life of the hydraulic system Trailer hitch: Allows easy transport on private land Off-road Frame construction: Integrated frame for secure support of the logs Fuel tank: 3.1 l for extended operating times Oil capacity: 0.6 l for the engine (10W40 or 15W40) Pre-assembled: Ready to use quickly The HS20288 log splitter comes with a well-thought-out package that allows for a quick start: Pre-assembled: The log splitter is already partially assembled and ready to use. Jiao gasoline engine (6.5 HP): Powerful 208cc engine, integrated and ready to use. Trailer hitch: Facilitates transport on private property. Hydraulic oil (HLP46): Already partially filled, so the splitter is ready to use immediately. Two-hand operation: For safe operation, both hands must remain outside the splitting area. Splitting wedge/crosspiece: Permanently mounted for effective splitting. Transport packaging: Robustly packaged to ensure safe arrival. Our customer service is available at any time to answer any questions you may have about the scope of delivery or commissioning!

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 113 kg, total width: 840 mm, total length: 1,620 mm, total height: 920 mm, fuel: super 95, fuel tank capacity: 3 l, Equipment: trailer coupling, The HS12288 log splitter from HZC Power impresses with a splitting force of 12 tons and a maximum splitting length of 530 mm. The 6.5 hp petrol engine ensures sufficient power and efficient work, while the splitting cycle of just 11 seconds guarantees fast wood processing. The device works in a horizontal position and is equipped with a fixed splitting wedge/splitting cross, which presses the wood against the wedge via the cylinder. The two-handed operation ensures additional safety. The log splitter is easy to transport thanks to the trailer coupling. General data: Manufacturer: HZC Power Model: HS12288 Splitting force: 12 t Maximum splitting length: 530 mm Splitting cycle: 11 s Oil pressure: 270 bar Hydraulic oil capacity: 10 l (HLP46) Product weight: 113 kg Shipping weight: 140 kg Dimensions assembled (LxWxH): 162 cm x 84 cm x 92 cm Dimensions with packaging (LxWxH): 110 cm x 54 cm x 80 cm Special features: Splitting wedge: 15 cm x 20 cm (LxW) Trailer coupling: For easy transportation Working position: Horizontal Operation: 2-hand safety control Splitting wedge/splitting cross: Permanently mounted, wood is pressed against the splitting wedge via the cylinder Motor: Manufacturer: Jiao Model: 6.5 HP / 208 cc Engine technology: Single-cylinder, 4-stroke, air-cooled, OHV (overhead valves) Displacement: 208 cc Cylinder: Cylinder with cast iron sleeve Bore: 68.3 mm Stroke: 55.9 mm Fuel tank capacity: 3.1 l Oil capacity: 0.6 l Engine weight: 16 kg Dimensions (WxLxH): 321 x 376 x 346 mm These details summarize the most important technical specifications and equipment features of the HS12288 log splitter from HZC Power. Splitting force: 12 t - For effortless splitting of wood up to 530 mm in length and a maximum diameter of 50 cm. Cable starter: Easy engine start, even in cold temperatures. Splitting wedge/splitting cross: Permanently mounted, ensures effective splitting without constant readjustment. Hydraulic system: Powerful system with 270 bar oil pressure, ensures high efficiency and durability. Working position: Horizontal - allows you to work comfortably while lying down. Two-hand operation: For maximum safety when operating the log splitter. Oil filter: Integrated oil filter for a longer service life of the appliance. Trailer coupling: For easy transportation on private land, but without road approval. Iisdpfx Aswalutokxsa Robust frame: Sturdy frame ensures that the split material is held securely during the splitting process. Compact dimensions: With a width of 84 cm, the splitter can be easily transported on a trailer. Engine: 6.5 hp petrol engine with 208 cc displacement for powerful splitting. Integrated table surface: Provides additional space for storing pieces of wood while working.

Condition: like new (used), functionality: fully functional, Year of construction: 2019, Scrap conveyor was installed on a Laser Next 1530 built in 2019, but was only used sporadically and was eventually dismantled. All parts on the belts are the complete attachments to the machine. Prima Power Art. No. D5.57H Steel conveyor belt for automatic turntable. Conveyor length to start of high conveyor: approx. 292 cm, high conveyor length approx. 160 cm. Total length approx. 452 cm. Conveyor height approx. 140 cm. Iijdpfx Aksvcpi Iexja Extension approx. 366 cm. Conveyor belt width approx. 67 cm. Conveyor width approx. 94 cm. Sale ex works without guarantee and return.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, type of cooling: air, overall weight: 2,310 kg, total width: 1,100 mm, total length: 4,400 mm, total height: 1,800 mm, warranty duration: 6 months, heating capacity: 265.5 kW (360.98 HP), HEAT PUMP KEYTER KWE6270QEP4W 265,5 Kw Heating capacity: 265.5 kW / 75.6 tons (40/45 — 7°C) Year of manufacture: 2019 Options: Hydraulic module Refrigerant circuit: 2 pcs. Iodpfx Akjvf Ebxexsia Condenser: Copper / Aluminum Heat exchanger: Plate Type of refrigerant: R410A Compressors: 2 pcs. DANFOSS DSH240A4APC + DANFOSS DSH295A4APC (scroll) Number of fans: 3 pcs. EBMPAPST A3G800-AU25-01 Hydraulic module: 2 pcs. water pump EBARA 30/1 50-160/7.4 expansion vessel. Weight: 2310 kg. Dimensions: 4.4 x 1.1 x 1.8 m. Working hours: 1024/1024/1477/1474 h. Condition: Excellent

Condition: excellent (used), Year of construction: 2016, For sale: Prima Power BCe Smart 2220 (2016) panel bending machine. Main advantages: Servo-electric technology – up to 60% lower energy consumption and up to 70% lower maintenance costs High bending quality and precision Compact layout, operator-friendly design Semi-automatic operation, manual sheet loading/unloading Equipped with a safety system: laser scanners, light curtains Technical specifications: Max. bending length: 2250 mm Max. sheet length: 2850 mm Max. sheet width: 1500 mm Max. panel diagonal: 3000 mm Max. bending height: 204 mm Iiodoxfiw Tepfx Akxja Bending force: 32 t (320 kN) Pressing force: 52 t (510 kN) Processable steel thickness: up to 3.0 mm Minimum thickness: 0.5 mm Average power consumption: 4.0 kWh Additional equipment and features: Software: Master BendCam 2D, Tulus HMI Tool library, visual simulation of the bending process Remote diagnostics, user-friendly control interface Lowerable work surfaces – convenient parts handling Year: 2016 Condition: Used, well-maintained, connected, can be seen in operation. If you have any further questions, we will be happy to answer them.

Condition: good (used), Year of construction: 2012, The Prima Power Platino FIBER is in good condition, one owner, always serviced on time by Prima Power service representatives. For sale complete with storage. All documentation, service reports are included. Recently serviced with a full annual service. Laser cutting machine is connected, available for inspection, testing, in Ukmergė. Specification: Model. Serial No.: 776 E 308 Year of manufacture: 2012 Made in: Italia Power: Working area (X x Y): Weight: Iiodoqi D Sqjpfx Akxsa Laser working hours: 61484 Cuts up to: 5 mm Location: Ukmergė Available for testing: Yes If you have any further questions, we will be happy to answer them.

Condition: excellent (used), overall weight: 70 kg, inner dimension length: 1,200 mm, inner dimension width: 800 mm, inner dimension height: 800 mm, load capacity: 1,500 kg, empty load weight: 70 kg, total length: 1,240 mm, total width: 835 mm, total height: 970 mm, mesh size: 50 mm, We offer used Gitterbox containers with dimensions of 1240x835x970mm UIC/EPAL. These containers are fully functional and undamaged. They are available in large quantities. Rental is possible. We speak Polish, German, and English. This price applies only to full truckload orders. We do not ship individual items or small quantities. Iiodpfx Ajxzim Hokxoa

Year of construction: 2014, condition: ready for operation (used), - USED - 7-AXIS ELECTRICAL CNC PRESS BRAKE AXIS: Y1 - Y2 - X - X1 - R - Z1 - Z2 BENDING LENGTH: 3060 mm TONNAGE: 105 ton DISTANCE BETWEEN UPRIGHTS: 3150 mm UPPER BEAM TRAVEL: 310 mm APPROACH SPEED: 110 mm/sec RETURN SPEED: 110 mm/sec Iiodpjxfm Ayefx Akxoa WORKING SPEED: 10 mm/sec CONTROL UNIT: PRIMA ELECTRO OPEN CONTROL WEIGHT: 7000 Kg OVERALL DIMENSIONS: 4406 x 1800 x 2600 mm NOTE: PNEUMATIC LOCKING OF TOP AND BOTTOM TOOLS; WILA TYPE TOOL ADAPTER; HEMMING TOOL; THICKNESS MEASUREMENT SYSTEM

Year of construction: 2018, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER X-AXIS TRAVEL: 3048 mm Y-AXIS TRAVEL: 1524 mm Z-AXIS TRAVEL: 150 mm RAPID FEEDS X-Y-Z: 100 - 100 m/min WORKING AREA: 3000 x 1500 x 150 mm SOURCE: IPG Fiber 4000 ; 4000 W Isdpfx Aevghb Dekxjia CONTROL UNIT: PRIMACH 30L WEIGHT: 10000 Kg OVERALL DIMENSIONS: 10500 x 3400 x 2200 mm

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an as-new Record Power PT310 Planer Thicknesser with a planing width of 310 mm. The machine is in its original condition and comes with full warranty. Iiodpfxoviu S Uj Akxsa Technical specifications: - Motor power: 3 HP / 230 V connection - Planer table length: 1,407 mm - Planing width: 310 mm - Cutter block diameter: 70 mm - Cutter block equipped with 3 knives - Maximum cutting depth: 3 mm - Feed speed: 7 m/min - Weight: 202 kg Shipping by freight: Austria: €80.00 incl. VAT Germany: €100.00 incl. VAT South Tyrol: €120.00 incl. VAT The planer is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! Related terms: surface planer, thicknesser, planer, surfacing, thicknessing Reference: ZXPT310-A

Condition: new, Year of construction: 2023, Laser source: Raycus 3 to 6kW Laser head: Raytools autofocus Structure: 2 horizontal chucks Loading: 6.5m unloading 2.5m Software: CAD CAM Tubest, Tube pro (Windows 10) Tube diameter: 15-230mm Tube profiles: round, rectangular, square Options: - 3 D swivel head - Automatic bundle loader - Table loader Iisdpfjnkailsx Akxsa - Conveyor unloader - Weld seam detection - Raybox - Extraction system

Condition: new, Year of construction: 2024, Basic configuration Laser source: Raycus Laser head: Raytool Autofocus Servo: Yaskawa System: FSCUT 5000 A Isdpfx Aemx R S Nskxsia Loading: manual Structure: 3 horizontal chucks CAD CAM: TubesT, TubePro Smoke extractor: Topsin 7.5kW with 6 filters Tube diameter: 15-350mm tube length: 0-4000/0-6000mm Maschinengröße: 13500x3400x2400mm

Condition: new, Year of construction: 2022, Model DPL-1530HP-4 kW 8 levels 3000x1500mm (300kg load per level) Iisdeci Ik Sjpfx Akxea Loading and unloading system Laser Raycus 4 kW Control system FSCUT 2000ER Laser head Raytools BM115 autofocus Cooler Hanli 3.8 kW Air blower 11kW Nesting software Cypnest-Nesting software Low pressure gas alarm gas pressure monitor and SW control Voltage stabilizer 48-72 KVA Laser class 4 enclosure Heavy duty machine base. High power servo motors. Intelligent cutting control system, easy operation Fast tacking, supported by segment and step tacking technology. Specialized air duct with oversized caliber, makes the smoke exhaust smooth. Completely enclosed construction European CE standard Dual shuttle tables provide a high level of safety and convenience. Positioning accuracy ±0.05/1000mm Repeat positioning accuracy ±0.03/1000mm Acceleration 1.6 m/s² Max. Speed 120 m/min Sheet loading 1500Kg Size 8907×2813×2658 mm Laser power 6000 W Control system FSCUT 2000 machine power 32-48 kW Voltage 380V/50Hz Delivery time 5 months (construction time + transport) delivery to customer's yard 3.500€ Installation and training 8.850 € Industry 4.0 software 9.500 € FILTERCUBE 2H, 4,0 kW, 40 m² 10.500,- € The Filtercube series is an extraction system equipped with filter cartridges, in the field of smoke filtration and dusts.

Condition: new, Year of construction: 2024, Laser source: 12 kW Raycus/IPG Laser head: Precitec Pro-Cutter 2.0 Control system: FSCUT 8000 Effective working area: 1520x3050 mm Max. Positioning speed: 120 m/min Max. Acceleration: 1,5 m/s² Positioning accuracy: 0,02 mm/m Repeatability: 0.03 mm/m Iodpfx Aei Ar Ruokxeia Max. Table load: 1500 kg

Year of construction: 2005, condition: like new (used), Climbing device / Facade climbing device Iedpfshydxzsx Akxsia Power Climber Facade lift / Facade climbing basket The device comes from government ownership and, according to the authorities, has never been used. The device can be loaded and shipped!

Condition: new, Year of construction: 2024, mast type: telescopic, lifting height: 2,000 mm, color: orange, General information Year of manufacture: Jan 2024 Iisdjraz N Djpfx Akxja Technical information Drive: Wheel GVW: 275 kg Dimensions (LxBxH): 118 x 74 x 167 cm Functional Lifting capacity: 125 kg Working height: 400 cm CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Financial information Price: On request Additional information Please contact Ernst van Hek for more information

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, operating hours: 90,899 h, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 8 mm, cutting speed: 60,000 mm/min, Automatic loading and unloading system Finn Power LU3000 included in the sale! TECHNICAL DETAILS Sheet size: 1,500 x 3,000 mm Maximum cutting capacity (steel): 20 mm Maximum cutting capacity (stainless steel): 10 mm Maximum cutting capacity (aluminum): 8 mm Iedpfx Ajwydh Eokxeia Laser power: 4,000 W Cutting Capability Positioning speed: 300 m/min Acceleration: > 2 g Cutting speed: up to max. 60 m/min Precision Position deviation for drilling (XY axes): max. 0.1 mm Profile deviation: max. 0.05 mm Angular deviation: 0.03° Control system: Siemens 840D Loading and unloading unit Maximum material weight for loading: 1,000 kg MACHINE DETAILS Operating hours Total operating hours: 90,899 h EQUIPMENT Full service history by Primapower All service records and user manuals available Cooling unit included Vacuum unit included Primapower offers dismantling and loading for €7,500.