Used Upper Piston Press for sale (16,085)

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 6214330001, overall weight: 89 kg, total height: 950 mm, power: 2.2 kW (2.99 HP), pressure (max.): 8 bar, noise level: 60 dB, new oil-free DENTAL piston compressor Dr Sonic 320-50-W-ES with attached double column adsorption dryer with sound insulation box and additional fan Oil-free piston compressor, two-cylinder, single-stage, max pressure 8 bar, built on 50 lt. internally coated tank with attached adsorption dryer. Ideal for 3 dental chairs – minimal space requirement due to compact design. Specifications: Type : Dr. SONIC 320-50-W-ES-3M Operating overpressure max : 8 bar Suction capacity : 320 l/min Effective delivery rate at 6 bar*) : 210 l/min Fgodpfxovlw Haj Aayod Number of steps : 1 Number of cylinders : 2 Compressor speed : 1400 1/min Nominal power drive motor : 2,2 Motor protection class / insulation class : IP 54 / F Operating voltage / frequency : 230 /50 V/Hz Sound pressure level (DIN 45635 T13) : 60 dB(A) Tank volume : 50 litres Width : 700 mm Depth : 500 mm Height : 980 mm Weight : 89 kg Compressed air connection : G 3/8

Condition: new, Year of construction: 2024, machine/vehicle number: 6913390001, hoku 113-90 – Solid tradesman compressors with V-belt drive and 2-cylinder high-performance unit made of gray cast iron The universal one with V-belt drive and high-quality equipment, especially suitable for tradesmen, for use where quality of compressed air as well as durability and efficiency are essential, long service life thanks to high-performance units with low speed, safe transport and excellent stability thanks to large wheels with parking brake, optimal cooling thanks to large fan wheel, aftercooler with cooling fins ensures a low boiler inlet temperature and thus less moisture in the compressed air, better efficiency thanks to optimized units, standard Fgsdpfxjvl Euxj Aaysd with Condor pressure switch, pressure gauge, pressure reducer with water separator and quick coupling, motor with overload protection Technical data: Suction capacity 500 l/min., filling capacity 375 l/min., maximum pressure 10 bar, tank capacity 90 l, cylinders/stages 2/1, speed 1,300 min-1, engine power 3 kW / 400 V from the Seevetal location, without transport, as seen, subject to prior sale.

Condition: ready for operation (used), Atlas Copco piston compressor 8.8 bar 30 kW / 40 hp. Dimensions: 190x150x130 cm 19628 hours Please note: The information on this page has been obtained and compiled to the best of our ability, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or a contract and we advise you to verify all relevant details. Financial information VAT/margin: Margin: The listed price includes VAT (VAT cannot be reclaimed by businesses) Fgjdpfx Aovdcutjayjd

Condition: used, Year of construction: 2023, operating hours: 448 h, machine/vehicle number: H2300010, power: 4 kW (5.44 HP), pressure (min.): 10 bar, used piston compressor available immediately: ALMIG HLA-15-10 (10 bar) The compressor has 43 operating hour and is available immediately. 3 cylinders Pressure: 10 bar Rated power: 11.0 kW Delivery quantity at 7 bar: 1220 l / min Fgsdpox Uwtdefx Aayjd Compressed air outlet: 3/4 " Dimensions length x width x height: 1450 x 710 x 830 mm Visit our store. We always have a large selection of new and used compressors in stock! Immediately available.

Year of construction: 2000, condition: excellent (used), Atlas Copco Crepelle High-Pressure Compressor Type: D44 Year of manufacture: 2000 Operating pressure: 40 bar Power: 220 kW Speed: 839 RPM Fgjdof Hly Sspfx Aaysd The compressor can be inspected at any time.

Condition: new, Manufacturer: Trane Fedpfsu Eb Aiox Aaysgd Type: CRHR400 G2HBO Type: Compressor Technical Specifications: Flow rate: 145.3 m³/h Discharge pressure: 28 bar Speed: 1450 rpm Voltage: 380/415 V 3PH 100/92 A 50 Hz Replacement price: €11,043 Condition: New

Year of construction: 2023, condition: new, functionality: fully functional, Equipment: compressed air system, compressor, FIAC AB 300 - 678 Fodpfx Asu Dxu Hjayegd - Oversized model, Very competitive pricing. - Several available from stock. Specifications: Tank: 270L Compressor capacity: 650 L/min Bar: 10 bar KW: 4 Pump type: AB 678 2/2 RPM: 1000 Code: 1121560311 EAN: 8020119109861 dimensions: 1600x560x1040 mm LxWxH

Condition: new, Year of construction: 2024, machine/vehicle number: MA0172, new KAESER EPC 630-250 St piston compressor - 10 bar with horizontal lacquered 250 litre container Year: 2024 2 cylinders max pressure: 10 bar Rated power: 3.0 kW Fodpfxjity Dqo Aayegd Volume flow at 6 bar : 410 l/min Volume flow at 8 bar : 375 l/min Sound level: 75 dB(A) Compressed air output: 1/2" Dimensions length x width x height: 650 x 700 x 1810 mm Weight: 150 kg Visit our shop. We always have a wide range of new and used compressors on hand!

Condition: new, Equipment: compressed air system, Refrigeration dryer, condensate drain, oil-water separator, and pre-/fine filter For use in environments where compressed air quality as well as durability and efficiency are essential V-belt drive Long service life thanks to two-stage high-performance compressor units with low speed Specially machined cast iron cylinders for minimal oil consumption and long service life Optimal cooling via large fan wheel Motor with overload protection Easy condensate drainage through standard 1/2" ball valve Supplied as standard with Condor pressure switch and pressure gauge Supplied as standard on safety base pallet with vibration dampers Fgjdpfxowwi Ace Aayjd Tank manufactured according to German AD 2000 regulations Intake capacity: 650 l/min Filling capacity: 520 l/min Maximum pressure: 10 bar Tank volume: 270 l Cylinders/stages: 2/2 Speed: 920 rpm Motor output: 4 kW / 400 V

Year of construction: 2022, condition: as good as new (ex-display), REKO 510-B Auxiliary compressor (reciprocating compressor) incl. operating hours counter incl. 3 litre compressed air tank Hours: 0.75 Bh Year: 2022 Maximum pressure: 10 bar Flow rate: 380 l/min Fsdpfjpyhpdsx Aayogd Nominal power: 3.0 kW Mains voltage: 400 V Compressor speed: 1200 min-1 Compressed air tank: 3 liters Dimensions: 735 x 620 x 698 mm Weight: 45 kg We always have a wide range of new and used compressors in stock!

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, New trade fair exhibit (available immediately): RENNER Riko 700/250 S-KT piston compressor with galvanized 250 liter container Fgodpfxjrxu Ere Aayed with refrigeration dryer and level-controlled condensate drain with sound insulation hood with CEE plug with metal buffer set for compressed air tanks Technical data: Motor power: 4.0 kW Rated voltage: 400V Max. pressure: 10 bar Delivery quantity at 7 bar: 570 l/min Cylinder / Stages: 2/2 Sound level: 68 dB(A) Volume compressed air tank: 250 liters Dimensions L x W x H: 1411 x 722 x 1377 mm Weight: 296kg We always have a large selection of new and used compressors in stock! Available immediately.

Condition: new, machine/vehicle number: 691340002, hoku 119-90 – 2-stage compression mobile piston compressor The universal one with V-belt drive and high-quality equipment, especially suitable for tradesmen, for use where quality of compressed air as well as durability and efficiency are essential, long service life thanks to high-performance units with low speed, safe transport and excellent stability thanks to large wheels with parking brake, optimal cooling thanks to large fan wheel, aftercooler with cooling fins ensures a low boiler inlet temperature and thus less moisture in the compressed air, better efficiency thanks to optimized units, standard with Condor pressure switch, pressure gauge, pressure reducer with water separator and quick coupling, motor with overload protection Technical data: Suction capacity 674 l/min., filling capacity 505 l/min., maximum pressure 10 bar, tank capacity 90 l, cylinders/stages 2/2, speed 920 min-1 , Engine power 4 kW / 400 V Fjdpfxjvl Ev Ae Aayogd from the Seevetal location, without transport, as seen, subject to prior sale.

Condition: new, Year of construction: 2025, machine/vehicle number: 10027619, Piston compressor with intake capacity of 620 l/min, filling capacity at 6 bar approx. 520 l/min, maximum pressure of 10 bar, tank capacity of 270 l, 2 cylinders with 2 stages, speed of 920 rpm, motor 400 volts, 50 Hz, 4 kW with Condor pressure switch and pressure gauge, incl. pre-filter, refrigeration dryer (230 volts), automatic boiler drainer (230 V), and oil/water separator, bolted on a safety pallet with rubber vibration mounts, available for immediate delivery from our Seevetal location, Fgodpfx Ajwgcb Djayod excluding transport, subject to prior sale.

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 2 h, pressure (max.): 14 bar, REKO H 510/150 piston compressor incl. operating hours counter incl. 150 litre compressed air tank Hours: 2.00 Bh Year: 2024 Maximum pressure: 14 bar Flow rate (12 bar): 360 l/min Nominal power: 3.0 kW Mains voltage: 400 V Compressor speed: 1200 min-1 Compressed air tank: 150 liters Dimensions: 1345 x 457 x 1054 mm Fgedpfx Aaevr Eiceysd Weight: 115 kg We always have a wide range of new and used compressors in stock!

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 31524565, overall weight: 286 kg, available immediately: RENNER Riko 960/270 ST-KT piston compressor with galvanized 270 liter container with refrigeration dryer and time-controlled condensate drain with star-delta starter with metal buffer set for compressed air tanks Technical data: Motor power: 5.5 kW Rated voltage: 400V Max. pressure: 10 bar Delivery quantity at 7 bar: 740 l/min Cylinder / Stages: 2/2 Sound level: 79 dB(A) Volume compressed air tank: 270 liters Fedswhxluopfx Aayogd Dimensions L x W x H: 970 x 795 x 1880 mm Weight: 264 kg We always have a large selection of new and used compressors in stock! Available immediately.

Condition: good (used), Stock number: 3051 Manufacturer: Schneider Year of manufacture: Model: 500-270 Machine number: 95118451 Operating hours: Fgjdpfxexw H Ugo Aayed Pressure: 10 bar Output: 393 l/min Tank Manufacturer: Behälterbau Burgau Year of manufacture: Tank number: 538394 Capacity: 270 l Pressure: 11 bar Temperature: -10°C to 50°C Connection: 3 kW Footprint: 650 x 700 mm Overall dimensions: 700 x 700 x 1,700 mm Weight: 150 kg

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, power: 822 kW (1,117.61 HP), For sale is an oil-free air compressor from Atlas Copco, model ZH6-5, in good, fully operational condition. The unit comes from industrial use and is ideally suited for applications requiring high standards of clean compressed air. The compressor is robustly constructed, making it particularly suitable for industry, food production, pharmaceuticals, or any other sector where oil-free air is essential. An inspection can be arranged by appointment. Technical specifications: • Manufacturer: Atlas Copco • Model: ZH6-5 • Year of manufacture: 2001 • Max. operating pressure: 8.8 bar • Power: 822 kW • Speed: 2980 rpm • Serial number: S88668802 Fodpfx Aeyi H Eksayogd • Design: oil-free • Quantity: two units available Scope of delivery: • Compressor unit as shown • Integrated control cabinet/controls

Condition: ready for operation (used), Volume flow: 650l/min, motor power: 5.5kW, tank volume: 350dm³, operating pressure: 10bar. On-site inspection is possible. Fgsdpovn S S Aefx Aayod

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Xerox Versant 280” color production system Items for sale: 1 x Xerox Versant 280 with the following features: Fgedpfx Aaozb Aivjyed Includes Fiery NX Pro Server (EX 280) Includes Booklet Finisher A-GW03/A-GW06/A-FN13/ Includes Paper Deck A-CF06 with high capacity Not the right configuration? It’s no problem to customize the machine to your specifications. Feel free to contact us! Meter readings: Total: Approx. 1,977,908 pages Color: Approx. 698,361 pages Black: Approx. 1,279,547 pages Condition: This listing is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and Shipping: You’re welcome to view the device during our business hours. Please schedule an appointment! Sturdy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of a functionality test for you. For more information, please feel free to contact us directly.

Condition: used, functionality: fully functional, This listing is for a used “Xerox Versant 180 Press” color production system Items included: 1 x Xerox Versant 180 Press with the following features: Includes Fiery E300-5 Includes Paper Deck A-CF01/A-GW03 Includes Booklet Finisher A-FN13 Not the right configuration? It’s no problem to configure the machine to your specifications. Feel free to contact us! Meter readings: Total: Approx. 729,330 pages Color: Approx. 505,865 pages Black: Approx. 223,465 pages Condition: This is a used device, which may show signs of use (minor scratches or yellowing). Fgedpfx Aaeza A Eueyod The device has been tested for functionality A test printout can be seen in the photo Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment! Seaworthy packaging and worldwide shipping available upon request! A functional test will be recorded on video for you prior to shipping or pickup. For more information, you are of course welcome to contact us directly.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used ‘Xerox Versant 280 Press’ colour production system. Item for sale: 1 x Xerox Versant 280 Press with the following equipment: Includes E300 controller Includes A-CF03 paper deck Includes A-FN13 booklet finisher Not the right equipment? It is no problem to configure the machine according to your requirements. Please feel free to contact us! Meter readings: Total: approx. 557,431 pages Colour: approx. 430,279 pages Black: approx. 127,152 pages Condition: This offer is for a used device, which may show signs of wear (minor scratches or yellowing). The device has been tested for functionality A test printout can be seen in the photo. Fjdsyludmopfx Aayegd Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment! Seaworthy packaging and worldwide shipping available on request! A functional test will be recorded on video for you before shipping or collection. For more information, please feel free to contact us personally.

Condition: used, high-frequency press line equipped with a motorized infeed roller conveyor, high-frequency press, and output conveyor. Fgjdpjzhrdbefx Aaysd

Condition: new, Year of construction: 2024, functionality: fully functional, operating hours: 1 h, type of input current: three-phase, table width: 1,000 mm, table length: 2,600 mm, total length: 2,000 mm, total width: 3,090 mm, total height: 3,600 mm, overall weight: 3,800 kg, workpiece height (max.): 60 mm, Wood gluing press 12 working fields main cylinders 12 x 3 =36 pieces ,cylinders 63 x 60 and 4 pressure side levelling 50 x 50 pieces 12 x 4 =48 pieces .Machine new invoice .Warranty one year .Press rotates with inverter controlled transmission .Press stop is on induction sensor .Or rotates smoothly .Actuation of cylinders with lever switches press field is one meter width 2,6 length 60 mm thickness . Fsdpotx T Tysfx Aayogd

Condition: good (used), functionality: fully functional, High-frequency press for glulam beams up to 22 meters Fgjdpfxsw A Hk Io Aayed maximum pressing width: 1300 mm maximum pressing thickness: 300 mm loading conveyor 3,000 mm press with section-by-section polymerization (3 meters each)

Condition: good (used), HFS-210 Hot Stamping Press The machine is in perfect condition. Year of manufacture: 2019. Description: The HFS-210 Hot Stamping Press is a pneumatic hot stamping press for hot stamping, embossing paper, and plastics. A useful device in any advertising agency or digital printing house. The cycle is operated manually. The pneumatic drive ensures repeatable work and very high die pressure on the material. The machine is equipped with an automatic foil feed, which significantly shortens the time of a single hot stamping cycle, a worktop, adjustable embossing depth, a hot plate ground to 0.01 mm accuracy, which significantly improves the quality of embossing with large dies, a control panel, and modern OMRON controls. Fgjdezdau Uopfx Aayjd Specifications: MODEL: HFS-210 Hot Stamping Press Heating plate size: 210 x 150 mm Work table area: 500 x 350 mm Heating temperature control: via display up to 200°C Holding foil adjustment: Automatic, potentiometer-controlled Hot plate pressure mechanism: pneumatic Height of the gilding stack: 68 mm Press force: 0.6 T Power consumption: 900 W Power supply: 230 V Machine dimensions: 750 mm (W) x 530 mm (D) x 1670 mm (H) Machine weight: 120 kg The machine includes a cross table and a die mounting frame. An instruction manual is included.