Used Unwinder for sale (382)

Year of construction: 2000, condition: good (used), Equipment: Unwind Guide system 1 Hot foil (or embossing) unit 1 Flexo unit 6 offset waterless printing units UV dryers Bedjumwn Aepfx Ab Tjdk 1 Hot foil (or embossing) unit 1 Embossing unit 1 Flat bed die cutting unit 1 Varnish unit - UV/IR Rewind

Condition: used, mileage: 92,415 km, power: 324 kW (440.52 HP), first registration: 08/2015, overall weight: 26,000 kg, fuel type: diesel, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, Equipment: air conditioning, * MAN Media Truck Advanced 12V radio * MAN sound system * Multifunction steering wheel * Air conditioning Bdjdpfx Aevhunmjb Tsk * Roof hatch ----* Cruise control * Differential lock * Power take-off * Leaf/air suspension ----* MEILLER RK 20/65 unwinder * Year of construction: 2015 * Rockinger towing jaw ----Internal vehicle number: 7930----Errors & prior sale excepted.

Condition: good (used), Container turning device, boiler turning device, welding turning device, welding turning device, welding turntable, welding turning device -Container turning device: Welding turning device on rail chassis -Drive motor: kW -Load capacity: 45,000 kg -Drive bearing: Installation dimensions 3860/3000/H1300 mm / 6900 kg -Counter bearing: Installation dimensions 3630/2570/H1300 mm / 3400 kg Bedpjwx Ed Sofx Ab Tjdk -Unwinding speed: m/min right/left running -Control unit: with hand control and foot pedal -Rail width: 2000 mm -Individual components: see photos -Transport dimensions: 7500/2700/H1300 mm -Weight: 10300 kg

Year of construction: 2014, condition: used, functionality: fully functional, Type of machine REWER Manufacturing year 2014 Weight 2000 kg Power supply 14 KW Voltage 3x400 V Air pressure 7 bar Rewound material foil: OPP, PET, PVC, OPS, LDPE: 40-50 mkm. cardboard Width of material 500 mm Max. winding diameter 800 mm 1 shaft core 76 Max unwinder diameter 800 mm 1 shaft core 76 Winding speed 0-400 m/min Max weight 400 kg Wind direction right to left or left to right (both side) Lay-on shaft 2 psc. Rewinder and unwinder separate Bdsdpfxokw Ufze Ab Tjk Web guide system with ultrasonic sensor 1 psc. Waste winder with splice table 1 psc. Slitting module rotary knife Control panel touch screen Adapter diameter 152 mm. 2 psc. Stroboscope with tape control sensor

Condition: excellent (used), functionality: fully functional, Segment I – Unwinder with stabilizing table The first segment is responsible for stable guidance of the material web. It is equipped with pins enabling both lamination and delamination of the face with liner or other raw material. It has a laminator with the possibility of precise pressure adjustment. In addition: • The hanging mechanism in each segment allows for continuous operation, eliminating the need to stop the machine while the flat die is working. • Leading (pulling) servomotors ensure precise control of the material, also located in the station. Segment II – Central (Die) The heart of the machine is the flat die, allowing for cutting and embossing. It has been equipped with: • Hot stamping system – thanks to the heated plate with a mounted matrix, it allows for the application of effective decorations. • Upper foil unwinders enabling additional material processing. • Manual pressure adjustment – four independent clocks provide full control over the process, which is particularly important for irregular matrices and unconventional work. • Lower trolley as an alternative to the hanging system – used depending on the specifics of the work. Segment III – Puncher The third segment is responsible for separating cut labels and transporting them to the receiving tray. • Puncher – precise separation of single labels. • Two laminators – one on each side of the puncher, with adjustable pressure. • Unwinders and winders ensuring smooth guidance of additional raw material. Segment IV – Rewinder The last segment is responsible for the final winding of the finished material. Equipped with: Bsdpfx Abswck U Ro Tedk • Two mandrels – enabling simultaneous or alternate winding of the finished product. • Web tensioning system (nip holding and web tensioning) – ensuring stable guidance of the material. • Slitting disc knife station. • Whisk (waste) extraction system. • Web sensors placed under each overhang, ensuring optimal process control. Additional functionalities • Remote control – the machine can be operated via the tablet included in the set. • Mark sensor system (register) – precisely matches previously printed raw material, ensuring high accuracy and repeatability of production.

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, High-performance 10-color web offset press with integrated flexo finishing: Equipped with 2 brand-new ESS flexo units with UV curing (only tested, never used in production), Contiweb non-stop unwinder, Müller Martini cross cutter with Unistacker, and AMAL non-stop rewinder. Advanced register and quality control systems, wide substrate compatibility, and flexible UV/Hot Air drying configuration. Key Features • 10-color web offset press • 2 ESS flexo units with UV curing – brand new, only tested, never used in production • Contiweb non-stop unwinder for continuous roll changes • Müller Martini cross cutter with Unistacker • AMAL non-stop rewinder • IST UV system for UV varnishing and special applications • Hot air drying for dispersion coatings • Comprehensive register & quality control (video monitoring front/back, longitudinal & lateral register, color zone control) • Extensive substrate flexibility (paper and films) Technical Specifications • Drive/Power: 2× DC main drives, total 72 kW • Electrical: Press 300 A; UV 200 A; 6 UV units • Printing units: 10 cassettes 25" + 9 cassettes 24" (10-color configuration) • Turning bars: between units 2/3, 4/5, 5/6 • Formats: 24" and 25" • Plate sizes: o 24": 627 × 745 × 0.30 mm o 25": 652 × 745 × 0.30 mm • Blanket: 1.05 mm – 765 × 635 mm Substrate Range Bodpoxdt D Iefx Ab Todk • Paper width: 220 – 740 mm • Max. printing width: 740 mm • Paper weights: 40 – 300 g/m² • Film thickness: 12 – 300 µm • Channel: 4 mm Reel Handling • Unwinding: Roll diameter 127 cm • Rewinding: Roll diameter 127 cm; cores 70 / 76 / 150 / 200 mm; roll-to-roll • Peripheral equipment: Contiweb non-stop unwinder, Müller Martini cross cutter with Unistacker, AMAL non-stop rewinder Flexo & UV Equipment • 2 ESS flexo units with UV curing (new): ideal for coatings, special colors, inline finishing • Hot air drying for dispersion coatings (front & reverse) • IST UV system (UV varnishing) – configurable positions within the machine UV/Thermal Drying Options • IST UV: multiple installation positions (e.g. after units 1, 2, 4, 5, 10, and at the flexo unit) • Hot air: front/back, suitable for dispersion coatings Anilox & Printing Modes (Flexo) • Anilox volumes (examples): 30 / 14.2 / 13.5 / 9.1 / 8 cm³/m² • Cylinder configurations (24" & 25"): 4/0, 3/1, 2/2 Register & Quality Control • Web guiding • Video monitoring (front & reverse) • Longitudinal & lateral register • Color zone control Finishing & Tooling • Remaliner: 4 single + 2 double discs • Punching: o 24": divisions 0 / 4 / 6 / 8 / 12 (head/side); 2 discs, 80 mm spacing, eccentrically adjustable o 25": divisions 0 / 4 1/6 / 6 1/4 / 8 1/3 / 12 1/2 (head/side); 4 discs, 80 mm spacing, eccentrically adjustable • Perforation: o 1× perforation cylinder 24" (division 0 / 4 / 6 / 8 / 12; partial perforation possible, mounted on punching shaft) o 1× perforation cylinder 25" (division 0 / 4 1/6 / 6 1/4 / 8 2/6 / 12 1/2; partial perforation possible, mounted on punching shaft) o 1× magnetic cylinder 24" Peripheral Equipment & Handling • Contiweb non-stop unwinder (continuous roll change, increased efficiency) • Müller Martini cross cutter with Unistacker (inline cross cutting & stacking) • AMAL non-stop rewinder (trouble-free, high reliability)

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, plate width: 250 mm, Equipment: documentation/manual, DMR Seri-Roll (rotary screen printing press for labels) Year: 10/1999 Type: 250/2C Width: 250 mm Maximum unwinder diameter: 700 mm 1 screen printing unit + UV 1 hot-foil stamping unit 1 flatbed die-cutting unit 1 rewinding unit 1 sheet cutting station Available: September 2025 Condition: Good Bodpoxdi N Hsfx Ab Tjdk Availability: Immediate (subject to prior sale)

Condition: good (used), Year of construction: 2020, operating hours: 200 h, functionality: fully functional, total width: 700 mm, total length: 800 mm, total height: 2,297 mm, type of input current: AC, You will find this and other machines that were part of our shipping line in our listings. If you are looking for a complete solution in this area or require several components, please feel free to contact us and we will get back to you promptly. Bsdexdcv Hspfx Ab Tjdk Brief overview of the shipping line and where the listed item was used: The shipping line was designed for pallet shipping, meaning cartons were erected (SOCO ATS 2300 + 2200) and sealed at the bottom for packing along the main shipping line. The finished packages were then top-sealed using a carton sealer (SOCO T-4200) and passed on to a labeler (LOGOPAK LOGOMATIC 415-T). After the Logomatic scanner verified the packages as error-free, they were handed over to the palletizing robot (SOKO PRS-LRS-1218-H3) to create a pallet packed according to our specifications/dimensions. Our video demonstrates the entire shipping line in operation. The item offered here is the LOGOMATIC 415-T labeler from LOGOPAK (circled in blue in the layout diagram). Summary of all relevant technical data for the LOGOMATIC 415 T labeling system: • Machine type: LOGOMATIC 415 T. • Print resolution: 300 dpi (12 dot). • Cycle performance: Maximum 20 products per minute. • Operation: HMI (10-inch color LCD display) in German. • Signal light: 3-color status light (red, blue, green) included. • Frame: Standard frame with stainless steel spindle feet (±50 mm adjustable). • Certification: CE certified (EU). • Mains voltage: 230V AC / 50 Hz (L,N,PE). Supply voltage should not fluctuate more than ±5% and be free from interference. • Power consumption: Maximum approx. 1400 VA. • Electrical connections at installation site: 1x Schuko socket for the labeler and 1x Schuko socket for maintenance purposes. • Compressed air: 6 bar, dry and oil-free. Air supply must be permanently installed up to approx. 1 meter before the device. • Compressed air consumption: Approx. 250 l/min. • Compressed air connection: ½ inch fixed line with FESTO quick coupling KD4-½-A and coupling plug KS4-CK-6. • Temperature: Ambient temperature for the labeler should be between +5°C and +37°C. For processing PE labels, a temperature of 25°C is recommended. • Applicator stroke length (net): 350 mm, defines the working area for different carton heights. • Labeling height: 800 mm (standard setting). • Orientation: Horizontally standing for top labeling. • Label unwind/carrier take-up: For rolls up to 600 m running length. • Label core adapter: 152 mm (6 inches). • Current format (Amazon): 60 mm width x 40 mm height. • Future shipping label: Approx. 100 mm width x 200 mm height. The above specifications can be adjusted depending on required label sizes. • Label gap: 8 mm. • Printing method: Thermal transfer. • Label material: Paper labels (Economy TT paper). • Ribbon (TTR): Wax quality. • Interface: Ethernet (10/100 Mbit). A serial RS-232C port is also available. • Data protocol: ZPL (Zebra). • Data source: Host system. • Data transmission: Print data is sent from a PC to the labeler via Ethernet.

Condition: good (used), Container turning device, boiler turning device, welding turning device, welding turning device, welding turntable, welding turning device -Container turning device: Welding turning device on rail chassis -Drive motor: kW Bdsdpjwyag Defx Ab Tsk -Load capacity: 60,000 kg -Drive bearing: Installation dimensions 3830/3000/H1300 mm / 7000 kg -Counter bearing: Installation dimensions 3540/2760/H1300 mm / 4200 kg -Unwinding speed: m/min right/left running -Control unit: with hand control and foot pedal -Rail width: 1990 mm -Individual components: see photos -Transport dimensions: 7400/2760/H1300 mm -Weight: 11200 kg

Year of construction: 1987, condition: good (used), functionality: fully functional, Asitrade Singlefacer E-Flute and B-Flute Bdsdpfx Astxlv Heb Tjk Year: 1987 - completely overhauled in 2019 Unwinder: 6-stations Max. working width: 1410 mm Max. speed: 150 m/min Sleeve: 100-140 mm Diameter: max. 1300 mm Water spray

Year of construction: 2023, condition: excellent (used), RIETSTACK IRS modular equipment - IRS 430 Maximum web width - 420mm Maximum mechanical speed - 200m/min Electric power 3x400V 50 Hz (5P-32A) Compressed air 6 bar Module unwind unit equipped with: Pneumatic unwind spindle - 76mm Maximum unwind diameter - 800mm Micro-processor control system Electronic counter (labels/meters) Splice table with 2 pneumatic clamps Precise adjustment of rewind and unwind web tension Electronic correction of web tension on unwind Flag detector Automatic stop at roll end De-curl-bar-unit Web guide BST Splice table with 2 pneumatic clamps Module for die cutting station Modified to work with BOBST M5 magnetic cylinder Die cutting station standard (including matrix rewinder) Maximum working width of magnetic cylinder - 420mm Bodpfsxc Ivpox Ab Todk Magnetic cylinder repeat size - 96T-220T Magnetic cylinder one included - 96T Die-cutting unit driven by servo drive Nip roller servo driven Matrix rewind spindle is driven by servo Matrix rewind spindle-diameter - 76mm Maximum rewind diameter-matrix - 600mm Matrix pneumatic pressure roller Hydraulic pressure read out 2 clocks Modified pressure bridge allowing to lift the magnetic die cylinder without hoist to mount the magnetic die plate. Matrix pneumatic pressure roller Nonstop stacker running max. 4 streams Delivery conveyor servo driven with vacuum belts and vacuum pump Simco antistatic bar: 3 pcs Max. width 420 mm Max. stack length 630 mm Max. stack height 120 mm Max. stack speed 80 m/min Stack height control by counting the sheets in the stack Speed dependable on material Stacks delivery by pushout system Stacker running full automatic continuous running mode Min size for ready stacks production is 50x50mm Smaller labels can be collected at the end of the conveyor Electric power 3x400V 50Hz (5P-16A) Compressed air 6 bar Control panels with HMI touch screen panels

Year of construction: 1994, condition: ready for operation (used), functionality: fully functional, cutting speed: 500,000 mm/min, roller width: 520 mm, No reserve price – guaranteed sale to the highest bidder! Machine operational as shown in the video! Small format cutter, cross cutter and cut-size sheeter TECHNICAL DETAILS Unwinding - 2x shaftless roll stands - Maximum unwind diameter: 1,200 mm - Core diameter: 70 mm - Maximum roll width: 520 mm - Paper grammage: 60 – 170 g/m² Cutting Unit - Number of knives: 3 - Cross cut formats: DIN A4, upgradable to DIN A3 - Maximum cutting speed: 500 m/min - Operating speed: approx. 250 m/min with 80 g/m² paper - Maximum cutting frequency: 1,700 cycles/min - Cutting tolerance: ±0.15 mm - Maximum sheets per minute: 1,000 PROCESS - Unwinding - Cutting unit with 3 knives - Cross cutter for DIN A4 - Overlapping - Counting and stacking of sheets - Transfer to the right in running direction - Output of finished packs, e.g., 500-sheet reams Bedpfoxcxx Uex Ab Tjdk

Year of construction: 2002, condition: excellent (used), CODIMAG VIVA 340 5-Color Offset + 1 x Varnsih Unit Flexo Age: 2002 Configuration: 5 Unit, 340mm Wide, Waterless Offset Label Press Semi Rotary Press, Bdedshydtyepfx Ab Tsk Sheeter Cross Cutter 6 x UV-dryer (IST) Corona Treatment Unwind with Splice, Web Guide, 5 Waterless Offset Printing Units, Flexo Varnish Unit, Rewind

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 150 h, input voltage: 400 V, total length: 6,000 mm, total width: 1,260 mm, total height: 2,130 mm, compressed air connection: 6 bar, type of input current: AC, overall weight: 2,500 kg, input current: 32 A, conveyor belt width: 550 mm, warranty duration: 12 months, roll width: 500 mm, 1. very precise fully automatic screen printing machine, which positions the motif with an accuracy of 0.03 - 0.05mm to the material. Bdedjqu R Skspfx Ab Tjk The integrated sensor recognizes the edge or print mark and positions the screen with an accuracy of 0.02mm to the sheet or print mark. It prints from roll to roll with unwinder + rewinder. UV drying and hot air drying up to 160 degrees Celsius are integrated 2. welded steel frame and very dynamic servo axes for maximum precision and smooth running 3. the printing table is made of cast aluminum with a flatness of ± 0.1 mm per meter 4. all guides are hardened linerar guides for a long service life 5. an integrated, electronically controlled pneumatic squeegee pressure compensation (option), which acts directly on the individual squeegee holders, is able to level out even the smallest unevenness in the printed material.

Condition: used, Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Bdsdpfx Asm Nlm Deb Tek Working height: variable from 0,5mm – 150mm adjustable Working width: 1150 mm Maximum part weight: 300 kg Wide belts with abrasive belt unwinding: 2200 mm As standard with vacuum hold system, optional with magnetic hold system Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 3 internal machining units and an additional external machining unit. Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 1994, For processing blank paper or with print mark reader (automatic register control) Maximum unwind diameter: 1,500 mm Core diameter: 70 mm / 152 mm Maximum cutting speed: 250 m/min (with 80 g/m² paper) Bdodsw R Uqdepfx Ab Tjk Formats: A3, A4 Maximum web width: 500 mm Minimum web width: 250 mm Paper grammages: 60 g/m² - 170 g/m² Maximum delivery belt stacking height: 100 mm Control system: Siemens Simatic S5 Technical specifications as per user (without guarantee)

Year of construction: 1993, condition: used, functionality: fully functional, machine/vehicle number: 8839, Rewinding machine for surface-sensitive materials such as papers between 30 and 300 g/m², films, etc. Working width max. 1800 mm, 2 rewinding stations for cores with 50 mm diameter. Bjdpfjttg E Ijx Ab Tjdk Attention: the second (rear) unwind visible in the video is not for sale, only the shaftless (front) unwind. For further details see attached PDF file.

Condition: good (used), Year of construction: 1990, SANJO P 25S - 6C Bdsdpfx Asgvg A Sjb Tok Age: 1990 Web-width: 270mm 6-color Flexo 1 x Varnish Unit Unwind Rewind Lot of printing cylinders, aniloxes are coming with the machine DELAM RELAM Located: Printingshop/Germany

Condition: used, Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Machine is suitable for heavy-duty use. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Bdjdpenah Taefx Ab Tek Working width: 650 - 1650 mm Maximum part weight: 2000 kg Wide belts with abrasive belt unwinding: 3250 mm As standard with vacuum hold system, optional with magnetic hold system By using 3250 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 5 internal machining units and 2 additional external machining units. The high rigidity of the machine structure and the feed table of this machine, combined with the advanced mechanics and electronics, make this series a universal machining centre for deburring and finishing. Please, contact us for getting more information and pictures on mail(at) or *

Year of construction: 2020, condition: as good as new (ex-display),  Age: 2020 – like new! Configuration:  440mm Wide Label Slitter Rewinder Bdedpfxspygq Do Ab Tjk  Maximum Web Width 440mm,  Unwind (710mm Max Diameter)  Dual 450mm Rewind,  Max Mechanical Speed: 300m/min,  Servo Driven,  Web Guide,  Splice Table,  Shear Slitting Unit.  45mm, 40mm & 76mm Mandrels

Condition: used, Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 1150 - 1350 mm Maximum part weight: 500 kg Wide belts with abrasive belt unwinding: 2620 mm As standard with vacuum hold system, optional with magnetic hold system By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 5 internal machining units and 2 additional external machining units. The high rigidity of the machine structure and the feed table of this machine, combined with the advanced mechanics and electronics, make this series a universal machining centre for deburring and finishing. Please, contact us for getting more information and pictures on mail(at) or * Bjdpjnah Tdjfx Ab Tjdk

Condition: refurbished (used), Year of construction: 2004, MPS EF 330-8 COLOR FLEXO Labelpress machine Bdedpotvap Ejfx Ab Tjk equipment:  Age: 2004  Web width: 330mm  Unwind  Corona Treatment  New BST web guide (Camera)  Teknek two-sided web cleaner  Coldfoil  Lamination  8 x servo driven flexo units  8 x GEW UV dryers (E2C)  1 x screen printing  Turnbar  Rotary Die-Cutting GAPMASTER  Rewinder

Condition: used, Deburring and fine grinding machine for sheet metal / flat material, new The compact machining centre for deburring, slag removal, rust removal, oxide layer removal, edge rounding, fine grinding through to polishing metal surfaces. Due to the fixed working height, this machine can also be optimally integrated into a production line and is suitable for machining large parts. Working width: 1350 mm Maximum part weight: 400 kg Wide belts with abrasive belt unwinding: 2620 mm As standard with vacuum hold system, optional with magnetic hold system By using 2620 mm long abrasive belts, you get a uniformly smooth surface and reduce consumption costs, as these belts have a longer service life. Due to the modular design of the machines, it is possible to offer the optimal configuration for the customer's machining task. The machine structure can accommodate up to 3 internal machining units and an additional external machining unit. The high rigidity of the machine structure and the feed table of this machine, combined with the advanced mechanics and electronics, make this series a universal machining centre for deburring and finishing. Please, contact us for getting more information and pictures on mail(at) or * Bedem Rpy Ropfx Ab Tsdk

Year of construction: 2012, condition: good (used), VIVA 420 ANIFLO – Waterless Offset Label Printing Press • Year of Manufacture: 2012 Bjdpfx Ajxbq Ufjb Tjdk • Configuration: 6-color ANIFLO, waterless offset, fully servo-driven • Web width: 200 – 420 mm • Maximum print width: 420 mm • Print length: 200 – 432 mm (variable, no cylinder/tool change required) • Printing speed: up to 12,000 cyl./h • Dimensions (L × W × H): approx. 12,300 × 2,500 × 1,800 mm Key Equipment Included: • Unwind with roll lift and splicing table • 6 × ANIFLO offset printing units, waterless technology, fully servo-driven • Technotrans temperature control for anilox, plate cylinder & UV impression roller • IR conditioning unit prior to first print station • Automatic pre-register and motorized lateral & circumferential register • 1 × flexo unit (servo, UV) with anilox roller, chambered doctor blade, ink pump • UV system IST-MBS 5 (6 cooled lamps, stepless control) • BST Powerscope video web inspection system • Gap Master for die pressure management • Format-variable die cutting unit (0.44 mm plate thickness) • Rewinder + matrix rewinder • Slitting unit (4 knives) • Web cleaning system SIMCO DD 320 • Electronic Insetter for pre-printed web re-registration • Various accessories: magnetic cylinder, anilox rollers, spare blankets, wash-up units, etc. Condition: • Very well maintained, complete line, still in production • Visual and technical condition: excellent.

Year of construction: 2011, condition: like new (used),  Year of manufacture: 2011  Servo drive  Job memory up to 50 jobs  Register control: Semi- and fully rotary  electronic motor control  Electronic web edge control  Waste and misprint stop  Unwind shaft: d=76mm  Unwind diameter: 700mm  Rewind shaft: d=76mm  Rewind diameter: 550mm  Automatic web stop at machine stop  Flexo printing unit GALLUS EM 340  Web width: 340mmm  Cliché 1.14mm  Fully rotary register control including servo drive  Die-cutting and printing of materials  UV drying  Web width: 410mm  Laminating  Pressure station mounted on printing cylinder  Punching unit LeoMat L  Adaptation of the GALLUS R250 magnetic cylinder Bdjdepyg Tbjpfx Ab Tek  Rotometrics impression cylinder  Grid rewind servo driven  Integrated edge trim suction  Including fully rotative register control