Used Unwinder for sale (373)

Condition: used, Used machine In all operating processes, materials are fed from the front side through the roller gap and bonded together by pressure. Standard number of axes: Material unwinding: 2 Silicone paper unwinding: 1 Roller gap adjustment: 0 - 52 mm Pressure: 0.3 - 0.8 N/mm Processing speed: Maximum: 5 m/min Slow operation: 0.6 m/min Reverse operation: 0.6 m/min Noise level: > 70 dB(A) Material data: Max. width: 1400 mm Max. material diameter: Pedpfxsy Nugks Aahspu Material unwinding: 200 mm Silicone paper rewinding: 150 mm Max. sheet thickness: 50 mm Core inner diameter: 76.2 mm Power supply: 230 V Availability: short notice Location: Röllbach

Year of construction: 2017, condition: used, Embossing machine Kolbus PE 312 Age: 2017 Machine is intended for blind embossing, film embossing and hot embossing of firm, flexible and plastic cases. Configuration: - Copilot system with touch screen - Case pre-stacking conveyor (positioning with case overlap) - Case bending station - Case supply with 90 ° pivoting option (format-dependent) - Film feeder with two film pulling rollers - Unwinder - Film withdrawal unit - Motorised embossing head adjustment (max. 70 mm) - Divided embossing table plate - Correction rails for positioning precisely according to the register - Temperature-controlled embossing head heater with timer for pre-heating - Linear deposit belt with delivery table including overlap width setting - Automatic case counter - Servo-controlled drive technology based on Siemens technology - Counter-stacker delivery to the right with roller conveyor delivery Special equipment: - 1 embossing plate for accommodating the embossing tool (adhesive fastening) - 1 embossing plate with grid holes for accommodation (screw connection) - Case set-up outside of the machine for reducing the make-ready time - 3rd film pulling roller controlled by step motor for the 1st film feeder - 2nd film feeder with two film feed rollers controlled by step motors - 3rd film pulling roller controlled by step motor for the 2nd film feeder - Set-up for embossing time extension - Set-up for multiple embossing - Cycled feed for ideal utilisation of the film Technical specifications: - opened case (hardcover) max.: 660 x 405 mm - opened case (hardcover) min.: 155 x 100 mm - opened case (flexible embossing material) max.: 400 x 300 mm - opened case (flexible embossing material) min.: 135 x 100 mm - case pre-stacking conveyor min.: 155 mm Ppjdpozgc Ibofx Aahju - pressure surface max.: 460 x 355 mm - pressing force max.: 350 KN - mech. speed: up to 80 embossings/min

Condition: like new (used), The PM13 wrapping machine is the latest generation from PRAS-MATIC and incorporates all the technical features required for high-speed shrink film packaging. The PM13, which operates without a sealing bar, utilizes a single lower film reel. With a continuous-motion process and a rotating knife, the polyethylene film is precisely cut to length and wrapped around the products by four rotating rods. This unique operating principle enables exceptionally high running speeds by eliminating the bottlenecks of conventional sealing bar systems. The film unwinding, feed, and cutting mechanisms are all electronically controlled. The PM13 is engineered for high-speed shrink wrapping of: Ppedpfxjyn Hw Ds Aahju - Cans - PVC and PET bottles (with cup or petaloid base) - Jars - Glass bottles - Detergent and plastic bottles SPECIFICATIONS: Package Size: - Max. length: 500 mm - Max. width: 360 mm - Max. height: 360 mm Film Reel Size: - Outer diameter: 500 mm - Core diameter: 70 mm - Thickness: 40–80 microns Cardboard Tray Dimensions: - Min.: 150 x 200 mm - Max.: 350 x 540 mm - Min. edge height: 30 mm - Max. edge height: 100 mm Tray Capacity: approx. 600 units Output: 40 to 80 packs/minute (depending on product characteristics)

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, Coating, laminating – additional unwinder for lamination Corona treatment – during coating of film with water-based dispersions Pedpfx Aasxwaikshopu Working width – 1700 mm Coating speed – 0–100 m/min Material in rolls Raw material – paper (50–300 g/m²), film (0.023–0.10 mm) Substances – solvent-based adhesive, water-based adhesive Type of coating – coating head: Mayer rod, anilox roller, slot die roller Dryer – length 18 m, 7 drying sections, temperature 30°C–170°C, gas drying (blower) Roll diameter – max 1400 mm Machine includes hot air generator Detailed description available on request.

Year of construction: 2015, condition: used, functionality: unexamined, machine/vehicle number: 116.067.00, 2 Walzen Ramisch Guarneri calender, type RGK 280.2000, configured as an inline calender with expansion stages for double-sided Simili mercerization of Jacquard cotton fabrics: 2-steel roller system with unwinding and rewinding units, Maier rotary head (cooled version), moisturizing system after unwinding, centrally controlled and braked unwinding, metal detector, seam monitor, stationary introduction system (3 rollers) motorized for tension regulation, 2 cooling rollers, rewinding combination (large bobbin winder with center winder), crane runway above the unit, 2x Yale overhead cranes (manually movable via chain). The condition can be seen from the attached appraisal report. Ppodsyiurrepfx Aahsu

Condition: new, Year of construction: 2026, functionality: fully functional, ## Description The KMK Easy Former PW140SR-C is a fully automatic roll feeding machine for the production of paper plates, bowls, and trays. Thanks to its modern, all-electric servo drive system, it offers high production output, maximum precision, and energy-efficient operation. The machine was specifically designed for manufacturers of sustainable paper packaging and is ideally suited for the economical production of a wide variety of disposable paper packaging. The quick tool change allows for flexible production of different formats and products. ### Highlights * Fully automatic production process (feeding, heating, forming, punching, and counting) * All-electric servo drive * Suitable for round, rectangular, and oval products * Quick tool change for different formats * Integrated punching system * Low tool and maintenance costs * User-friendly touchscreen control * Robust and durable machine construction * High production accuracy ### Products that can be manufactured * Paper plates * Paper bowls * Paper trays * Curl containers * Flat-rimmed plates * Various disposable paper packaging ### Technical data * Working speed: up to 28 cycles/minute * Table size: 660 × 420 mm * Maximum roll width: 620 mm * Maximum roll diameter: 1,500 mm * Paper thickness: 0.30 – 0.60 mm * Forming tools: up to 3 tool sets * Punching tools: up to 3 tool sets * Main drive: servo motor * Total power: approx. 31 kW Ppodpjzg E Hgjfx Aahsu * Machine weight: approx. 4,100 kg * Machine dimensions (L × W × H): 5,120 × 1,800 × 2,278 mm ### Standard equipment * Automatic roll unwinder * Automatic product stacking system * Intuitive touchscreen control ### Included in the scope of delivery ✅ New machine directly from the manufacturer ✅ 2-year warranty ✅ Professional installation and complete assembly by experienced KMK technicians ✅ Machine commissioning on-site ✅ Free training and instruction of your operating personnel ✅ Comprehensive after-sales service and technical support even after installation ### Machine type Roll feeding machine for the production of paper plates and paper packaging KMK Easy Former PW140SR-C

Condition: ready for operation (used), Year of construction: 1993, Output: 1000 envelopes/min, min/max envelope size: 90mm x 120mm/176mm x 254mm, roll unwind: Contiweb, web alignment system: 1x BST, print units: 5+0 or 4+1 Doctor Blade, ink tanks: 4x Inkcan, ink pump: 4x Pneumatic, window unit: traditional punching knives and adhesive paper. Includes Top and bottom scriber, time lubrication unit, latex and dextrin sealing, infrared drying, electronic counter and monitoring. Ppedpfx Aotqnuxsahsu

Condition: excellent (used), Stations/Equipment: Unwinder Rewinder Extraction system incl. shredder (4x Lundberg Type WT200-200U - year 2018) Inert enclosure Ppodoxzufhopfx Aahsu Busbar laminating unit Cutting units Laminating units / adhesive application units Heated rollers Master computer Control cabinets Drive motors Gantry crane Corona treatment

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, total width: 2,900 mm, total height: 3,300 mm, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 3 interchangeable tools • powerful vacuum blower for fixing the material Ppsdeif Ek Rjpfx Aahsu • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 2002-045, total width: 2,900 mm, total length: 3,300 mm, Used CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm Multifunctional CAM cutting system with CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam, and other flat, semi-flexible, or rigid, non-metallic materials Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head The machine is sold with a CCD camera for detecting print marks • Multifunctional tool head for holding 3 interchangeable tools • Powerful vacuum blower for fixing the material • Equipped with gray conveyor belt table as standard. Green-blue replacement conveyor available (provides high contrast for dark materials) Additional tools are available (on request): • EOT electric oscillating knife • POT pneumatic oscillating knife • PRT driven circular knife • UCT universal knife (pull knife) • KCT kiss-cut tool • CTT creasing tool • V-cut angle cutter • Printer mark recognition • Camera registration • Punching tool for notches or holes • Milling cutter with suction device User-friendly • Easily replaceable cutting tools, “PLUG & CUT” • Intuitive user interface • Easy blade replacement • Vacuum zones can be activated with a click Fast amortization • Low costs with high added value Ppsdsfnlkwopfx Aahsu • Optimal material utilization thanks to nest expert software modules (not included in the equipment) • High speed • Consistent precision Data: • Short cutting times thanks to high positioning speed of up to 90 m/min • Repeat accuracy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both sheet material and roll material (can be expanded with a suitable unwinder) • Fast amortization (Product photo as an example) The machine is CE certified.

Condition: used, Year of construction: 2022, PRODUCT TYPES: • Four-side seal pouches Ppedpfx Aaszf Nk Tjhju • Quad seal pouches • Side seal pouches • Transverse zipper pouches • Gusset pouches • Bottom stick hole pouches • Micro-perforated pouches • Handle hole pouches • Round corner pouches MATERIALS: • LDPE • CPP • MCPP • AL • Nylon • PP • Laminated film structures MAIN TECHNICAL INFORMATION: Material thickness: 60–250 μm Max. web width: 1300 mm Max. roll diameter: 800 mm Core diameter: 3” and 6” Max. pouch width, quad seal: 400 mm Max. pouch length: 1000 mm Eye mark accuracy: ±1 mm Machine speed: 15–65 pcs/min Material speed: 40 m/min Main power: 400V, 50Hz, 3 phase Installed power: 100 kW Machine weight: approx. 18,000 kg Machine size: 33,500 × 4,200 × 1,800 mm POUCH SIZE RANGE: Quad seal / side welded width: 180–400 mm Gusset depth: max. 80 mm Minimum gusset depth: 30 mm Bag length: 360–1000 mm UNWINDING SECTION: • Air shaft unwinding • Magnetic powder brake • Dancing roller tension control • Servo-driven unwind system PERFORATION SYSTEM: • Micro perforation unit • Wheel-type perforation • Additional perforation holes • Same type as existing machine configuration FOLDING SYSTEM: • Four-side seal / quad bag folding wheel section SEALING AND COOLING SYSTEM: Mechanical press sealing system: Quad seal longitudinal sealing: 2 groups, 1010 mm Quad seal longitudinal cooling: 2 groups, 1010 mm Cross sealing station: 6 sets No. 1: K-seal No. 2: Gusset filling sealing No. 3: Cross seal, 740 mm length / 60 mm width No. 4: Cross seal, 740 mm length / 60 mm width No. 5: Cross seal, 740 mm length / 60 mm width No. 6: Cross cooling, 740 mm length / 60 mm width Additional 5 mm sealing section, upper and bottom PUNCHING SYSTEM: Tear slit / notch puncher 3-hole handle puncher Handle puncher: 20 × 80 mm, 3 sets Hole sizes: • 3 holes Ø20 mm • 20 × 80 mm • 24 × 77 mm Round corner puncher: 2 sets Puncher supports: 3 sets Bottom stick hole puncher: • 12 mm, 8 pcs • 16 mm, 8 pcs Vacuum system for punch waste removal DRIVE SYSTEM: Main motor: 3.5 kW Back draw roller servo: 3.5 kW Front draw roller servo: 3.5 kW Middle draw roller servo: 3.5 kW Longitudinal independent sealing servo: 5 kW × 2 Unwind servo motor: 1.5 kW × 1 / 3.5 kW × 1 Tension control servo: 3.5 kW × 1 Flying knife servo: 1.5 kW × 1 Manipulator sucker drive: 0.75 kW × 1 Finished product carrier counting drive: 0.75 kW × 1 CONTROL SYSTEM: • PLC control • 10” touch screen • Suitable for printed and unprinted bags • 16 temperature control zones • Individual temperature display • Temperature tolerance: ±2°C • High-sensitive eye mark sensor • Adjustable eye mark position STACKING SYSTEM: • Simple type stacking table • Static removal system • Automatic stop when machine stops • Alarm for bag output range: 25–100 bags • Step motor belt control • Belt width: 60 mm • Adjustable batch and belt length SAFETY SYSTEM: • Safety light curtain • Emergency pulling rope • Emergency buttons every 2 meters • Individual emergency control INCLUDED OPTION: ZIPPAK transversal zipper attachment Transversal zipper unwinder and rewinder Innolock / Velcro zipper capability Tooling for 3 zipper sizes: • 180–220 mm • 230–300 mm • 310 mm Micro-perforation holes Bottom stick hole puncher Trim rewinders: 3 sets Chiller: 1 set Spare K-type sealing knives: 3 sets

Condition: new, Year of construction: 2026, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Ppsdpfx Aaouzv Tzeheu Metal unwinder (can be floor-standing, manual console, automatic console).

Condition: used, Year of construction: 1995, functionality: fully functional, Technical condition: Electrical system retrofitted in 2006. Technical details: Control system: Siemens S-5, line control: CP Line Materials processed to date: PE, LLD, PP, PUR Screw diameter: 1 x 80 / 1 x 45 mm Screw length: 24 D Minimum cable diameter: 2 mm Maximum cable diameter: 22 mm Maximum speed: 280 m/min Injection head: included Pedpfx Aozf A Npsahspu Injection head manufacturer: Erocab Operating voltage: 3x400 V Frequency: 50 Hz Control voltage: 24/230 V Electrical cabinet: included Diameter measuring device: included Plasticizer: included Unwinder: included Rewinder: included Caterpillar, belt, and disc take-offs: included Extruder: included Number of extruders: 2 Cooling trough: included Dancer/accumulator: included Installation length: 70 m Consisting of: ITAL SPA/1250 unwinder NOKIA-MAILLEFER JF 18 unwinder NOKIA-MAILLEFER NMB 80-24D extruder NOKIA-MAILLEFER NMC 45-24D co-extruder NOKIA-MAILLEFER U4A caterpillar ITAL VRR/3-600-63 cooling line ITAL ACO 350 accumulator ZUMBACH DSt.28A.30.KE40-RS spark tester ZUMBACH ODAC 34XY diameter measuring device (hot) Color mixer CAPnet meter counter MAILLEFER caterpillar ZUMBACH ODAC 34XY-Jn-F diameter measuring device (cold) ITAL ACV/350-4.5 dancer Drum flange diameter max: 1200 mm NOKIA-MAILLEFER Bobinoir JF22 rewinder Drum flange diameter max: 2200 mm MAILLEFER JB dancer KBA-Metronic GmbH alphajet printer KBA-Metronic GmbH alphajet printer CAPnet CHA 20 40 caterpillar take-off for accumulator

Condition: used, Hego cut-to-length line Psdsvk D Alopfx Aahepu Working width 500x2mm Speed 10-12m/min Mechanical decoiler max. 1000kg Coil inner diameter 400/508mm Straightening machine with 9 straightening rollers and 2 feed rollers and film unwinder The offer is aimed exclusively at traders within the meaning of §14 BGB no sale to private customers!

Condition: good (used), Year of construction: 1984, - Unwinding Pjdjzczmpopfx Aahopu - 4 printing units (UV letterpress, semi-rotary) - 1st embossing unit - 1 printing unit for overprinting the embossing foil - 2nd embossing unit (defective) - Flatbed die-cutting - Rewinding The machine is currently still in production.

Condition: good (used), Wire electrode, welding wire, welding wire, flux-cored wire Ppjdpfx Aajzcv Rpehsu -Welding wire: flux-cored wire, drum with unwinding device -Wire: Aluminum Ø 2.4 mm -Roller: Ø630 x 460 mm -Transport dimensions: 680/640/H690 mm -Weight: 238 kg

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, power: 24 kW (32.63 HP), coil weight: 10,000 kg, overall weight: 12,000 kg, The machine is available for immediate delivery. We offer a new D23 sheet metal roofing profiling machine with a 3D shear. The machine is new and ready for pickup. Type: D23 Year of manufacture: 2026 Serial number: 2502242007 Weight: 12,000 kg Maximum power: 24 kW Supply voltage: 3x400 V Supply frequency: (50÷60) Hz The machine consists of: Hydraulic unwinder, 10 tons + cross-over carriage, 10 tons; Sheet feeding system with rotary shears; Profiling section; Psdpszfi Thsfx Aahopu Hydraulic press for embossing; 3D profiling shear for cutting; Sheet collector, 5 m + collection carriage; Control cabinet. If you have any questions or require further information, please send a message or contact us by phone.

Year of construction: 2022, condition: like new (used), New digital label printing machine Valloy Bizpress 13R. The equipment was only used for demonstration purposes. Toner-based LED printing technology Color configuration: CMYK Printing speed: 7.3 m/min Printing resolution: 1200x1200 dpi Media width: 210 - 330 mm Printing width up to 304 mm Media thickness: 50 - 350 microns (30 - 350 gsm) Media type: paper, PP, PVC, PE Eye-mark sensor for pre-printed or cut media Unwinder & rewinder max. roll diameter 450 mm Size: 1400x850x1000 mm Features: Psdpfx Aaswwg N Tshepu Pneumatic expandable unwinder and rewinder Web guiding system with splice table Media cooling system High voltage anti-static ionizer Electric tension control via magnetic powder brake Machine inspection and testing are welcome. Installation and training can be provided for an additional fee.

Condition: good (used), Year of construction: 1989, functionality: fully functional, working width: 500 mm, wire diameter (max.): 4.5 mm, We are offering this used Gensch GSA 2200 wire mesh welding machine, manufactured in 1989, in good condition. The mesh welding machine can process wire thicknesses from 3 to 5 mm. Operating principle: The longitudinal wires, up to 6 pieces, are drawn from coils that unwind from spools into the welding portal. The transverse bars then fall from the magazine into the welding portal; the spacing of the transverse bars can be adjusted freely. The welding presses close, and the longitudinal and transverse wires are welded together. After the welding process, the CNC-controlled carriage advances the mesh mat step by step. At the end, the mat is cut, and any wire overhang is trimmed. Finally, the mat is stacked. The current working width is 50 cm. The length of the mesh can be freely selected from 20 cm to 200 cm. Psdszfgqqspfx Aahjpu If you have any questions or need more information, please send us a message or call us.

Condition: used, Year of construction: 1989, About Bickel - HK 3/50 The Bickel HK 3/50 is a high-performance, narrow-web flexographic printing machine designed for label and packaging applications. This machine is ideal for printing on a variety of substrates, including paper, film, and foil. Key features of the HK 3/50 include its compact design, high-speed printing capabilities, and advanced ink system. The benefits of this machine include its ability to produce high-quality prints at fast speeds, making it an ideal solution for label and packaging converters. Typical applications of the HK 3/50 include printing labels, stickers, and packaging materials for the food, beverage, and pharmaceutical industries. Key Technical Aspects: Dimensions and Specifications : The Bickel HK 3/50 has a compact footprint of 3.5 meters in length, 1.5 meters in width, and 2.2 meters in height. It weighs approximately 2,500 kilograms and has a maximum web width of 330 millimeters. The machine's maximum printing speed is 200 meters per minute. Paper Handling : The HK 3/50 features a 3-spindle unwind system with a maximum unwind diameter of 1,000 millimeters. The machine is equipped with a servo-driven rewind system with a maximum rewind diameter of 800 millimeters. The paper handling system also includes a web guide system and a Corona treatment unit. Printing Unit : The HK 3/50 features 3-6 printing units, each with a maximum printing width of 330 millimeters. The machine uses a flexographic printing process with a resolution of 508 dpi. The printing speed can reach up to 200 meters per minute. Ink System : The HK 3/50 uses a water-based ink system with a chambered doctor blade system. The ink system features a 3-liter ink tank and an automatic ink circulation system. The machine is also equipped with an anilox roll cleaning system. Pjdjx Exatepfx Aahepu Plate Cylinder : The plate cylinder of the HK 3/50 has a diameter of 250 millimeters and a repeat length of 330-660 millimeters. The plate cylinder is designed for easy plate changing and features a pneumatic clamping system.

Condition: new, With digital technology, the NEOPULSE 400 CW is a three-phase pulsed MIG / MAG generator for heavy industry. Mobile and equipped with a cooling unit and a high-performance unwinding system, the NEOPULSE 400 CW is ideal for tackling the most demanding applications. Intuitive and functional, its digital interface makes it possible to act on the welding parameters with ease. MULTIPROCESS WELDING MIG/MAG : - steel and stainless steel wire: Ø 0.6 to 1.6 mm - aluminum wire : Ø 0.8 to 1.6 mm Ppsdpemxkggsfx Aahou - CuSi and CuAl wire : Ø 0.8 to 1.6 mm - Flux-cored wire: Ø 0.9 to 2.4 mm MMA DC / Pulsed: basic, rutile and cellulosic electrodes (up to Ø 6 mm). TIG DC CONTACT / PULSED. Gouging (up to Ø 6.5 mm).

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 2138, input voltage: 380 V, type of input current: three-phase, ÖZM 1100 BLSD BOTTOM SEALING BAG MAKING MACHINE Machine length: 6600 mm Machine width: 1900 mm Machine height: 1750 mm Year of manufacture: 2024 Capacity: 150 pieces/min Bag length: 100 - 2000 mm Bag width: max. 1100 mm Film thickness: 0.007 - 0.200 mm Servo motor (pulling roller motor): 5 kW Main motor (jaw motor): 1.5 kW Unwinder motor: 0.75 kW Bobbin unwinder motor: 1.5 kW Pedpfjzd S A Ajx Aahopu Hydraulic bobbin lifting motor: 0.37 kW Edge control motor: 0.25 kW Conveyor motor: 0.25 kW Upper jaw heating element: 3 kW Lower jaw heating element: 2.5 kW Cutting heating element: 1.1 kW Current type: 3 - 50 Hz Operating voltage: 380 V Air pressure: 6 bar Total power: 19 kW

Year of construction: 2016, condition: good (used), Codimag VIVA 340 Aniflo Podpfxjtnhyqj Aahopu  Age: 2016  Format: 340mm  Paper unwinding  Corona unit  Web cleaning  6 x Offset  Hot foil unit.  2 x Flexounit  Web edge control  CHILLER  Register Control  Paper rewind

Condition: used, MPS EF 430 Year of Manufacture: 2006 _____ Product Description: • Webwidth: 430mm • 8 x Flexo Printing Units • Rewinders • Unwinder • Web Path Extension with Heater • Anti-static bar single • Web break control • Corona treatment • Combi Slitter Scissors • Web turner unit including backside reading • Lamination unit Ppedpfx Aajwaafyshou • Automatic register control • Cooling roller unit • 8 x UV Dry Sation Air Cooled • Infeed Unit 900 Machine Specifications and Equipment: _____ Accessories Included:  Manuals  Keys  Etc. _____ Technical and Optical Condition: • Technical: 9/10 (checked and in excellent running condition) • Optical: 9/10 (cleaned and ready for immediate end-user deployment) _____ Price & Terms:

Year of construction: 1998, condition: good (used), Type: Rewinder / Inspection System (no printing units) Year of Manufacture: 1998 Condition: Well-maintained, functional, recently in operation Availability: Immediately Location: Labelpressshop: Germany _____ Technical Specifications: • Maximum Web Width: 420 mm • Unwind Unit:  – Max. roll diameter approx. 800 mm  – Pneumatic brake  – Web guiding system • Rewind Unit: Ppodpfx Aaewvk Rxsheu  – Dual spindle rewinding  – Max. roll diameter approx. 600 mm  – Independent tension control • Drive System:  – Servo-driven  – Variable speed control  – Integrated operator panel • Additional Features:  – Integrated splice table  – Electronic meter counter  – Inspection with strobe light  – Machine is dedicated to slitting and rewinding only _____