Used Unloader for sale (1,727)

Condition: new, empty load weight: 850 kg, maximum load weight: 1,750 kg, overall weight: 2,600 kg, loading space length: 3,150 mm, loading space width: 1,660 mm, loading space height: 2,300 mm, tire size: 185/65r14, 2 horse trailer with tack room from ChevalLiberte model TOURING-JUMPING. Spacious entrance door, elegant design, aerodynamic, various poly colors, aluminum walls and aluminum floor. Horse transporter for two horses with outstanding driving characteristics! The aluminum horse trailer is equipped with Pullman2 running gear, which was developed by Cheval Liberte itself. A 35 cm access height, independent suspension, trailing arms, coil springs and shock absorbers ensure unrivaled driving comfort. A flat loading ramp makes loading and unloading very safe. The ramp-door combination of the horse transport trailer is outstanding. This means that pallets and horses can be loaded stress-free and without injury and the interior is easier to clean. This prevents the horses from slipping off the flap. The two-horse trailer is equipped with tack room, polyester hood available in various colors, aluminum walls, aluminum floor, high entrance door, folding door system, Pullman2 chassis, 100km/h, interior light, automatic support wheel, four sliding windows, stable frame, V-drawbar and so on. You will find the complete equipment below. Inexpensive horse trailer accessories such as a tethering bracket, feed bucket, weather protection hood, drawbar protection, trailer lock, aluminum rims and scraper mats are also available. The body is splash-proof. --- You can also find all our low-cost offers on our homepage Germany-wide delivery (except islands) possible! Redjhuc R Uspfx Adajn for the prices. --- PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Fax: Pick-up times: Monday - Friday - o'clock Saturday is not possible!

Condition: new, empty load weight: 970 kg, maximum load weight: 1,630 kg, overall weight: 2,600 kg, loading space length: 3,780 mm, loading space width: 1,810 mm, loading space height: 2,300 mm, tire size: 185/65r14, 2 horse trailer with inclined position from ChevalLiberte model DUOMAX. Front exit, tack room, diagonal loading, aluminum walls and aluminum floor combined in a rot-proof aluminum horse trailer. Aluminum horse transporter for up to two horses with excellent driving characteristics thanks to the Pullman2 chassis! The comfort chassis of the aluminum horse trailer is an in-house development by Cheval Liberte. With an entry height of 45 cm, independent suspension, trailing arms, coil springs and shock absorbers, the ride comfort is second to none. Safe loading of the horses through a flat ramp flap, which can also be set up as a door, reduces the risk of injury when loading and unloading. Rodpfx Adeghuq Asaon In addition, pallets can be loaded easily and the trailer is easier to clean thanks to the flap/door system. Thanks to the inclined position of the horses and the front exit in this horse transport trailer, you can always lead your horses comfortably forwards. The partition wall with privacy screen separates and secures the horses perfectly. The partition wall is adjustable to accommodate horses of different sizes. An opening side flap with lifting aids provides ventilation when you arrive at the showground. There is plenty of room to change in the huge and accessible tack room. The two-horse trailer is equipped with an inclined position, partition wall with belt and privacy screen, front exit, huge tack room, poly hood available in various colors, aluminum walls, aluminum floor, entrance door, flap and door system, Pullman chassis-2, 100km/h, interior light, automatic support wheel, sliding window, spare wheel, stable frame, V-drawbar and so on. Horse trailer accessories such as external tethering bracket, feed bucket, drawbar cover, anti-theft device and scratch mats are also available. The body is splash-proof. --- You can also find all our low-cost offers on our homepage Germany-wide delivery (except islands) possible! for the prices. --- PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Fax: Pick-up times: Monday - Friday - o'clock Saturday is not possible!

Year of construction: 2022, operating hours: 2,737 h, condition: used, machine/vehicle number: 110000503, Grinding wheel speed: up to 120 m/s, workpiece weight: up to 80 kg, control system, manufacturer: SIEMENS/MARPOS, type: Sinumerik/P7, 1 automated workpiece unloading station, manufacturer: JOVI, type: 1113A, year of manufacture: 2022, net weight: approx. 300 kg, 1 air filter unit, manufacturer: IFS, type: VARIO M 2000, serial number: 568113, year of manufacture: 2022, net weight: approx. 120 kg, connected load: 400/460 V, 50/60 Hz, 0.7 kW, 1.7/1.6 A, 1 water cooling unit, manufacturer: HASCH, type: MCW-50CT-17AUZ1-3407C, serial number: 1001220302582, year of manufacture: 2022, net weight: approx. 150 kg, tank capacity: approx. 15 l, 1 coolant filtration system, manufacturer: MICRONFILTER, type: Easy 250/KMT350, serial number: 0201, year of manufacture: 2022, tank capacity: approx. 2,300 l, connected load: 400 V/50 Hz, 5.34 kW, 1 immersion cooler, manufacturer: HASCH, type: MCS-120ST-05AOP6R7S6UZ1-3407C, serial number: 1003220400836, year of manufacture: 2022, net weight: approx. 206 kg, 1 coolant tank, manufacturer: MICRONFILTER, type: VR200L/MIN-150L, serial number: 0201, year of manufacture: 2022, tank capacity: approx. 150 l, connected load: 400 V/50 Hz, 1.1 kW, 1 magnetic separator, manufacturer: MICRONFILTER, type: KMT350, serial number: 0212, 1 loading unit, manufacturer: DANOBAT, type: rotary table lift, serial number: 3810490908, year of manufacture: 2022, net weight: approx. 170 kg, max. load capacity: approx. 230 kg, 1 rotary table transport trolley Redpfx Adjx Akk Neaon

Condition: used, Year of construction: 2008, functionality: fully functional, Belt Conveyor/Conveyor Belt/Belt System Manufacturer: VanderLande Year of manufacture: 2008 Condition: Used With pneumatic energy NGGV-3500x1180 Total length: approx. 3500 mm Total width incl. motor: approx. 1180 mm Total width without motor: approx. 800 mm Belt width: approx. 700 mm Divided into 3 segments: 1x approx. 600 mm long Rsdpfxjyftphe Adaen 2x approx. 1250 mm long Conveying height: approx. 850 mm – height adjustable Material: Steel Color: Grey Includes SEW motor (2.2 kW) Includes support feet Stock: 8 units available Price per unit Article number: 2026012901 The conveyor system was operational until removal. Condition: Fully functional, with signs of use Ideal for fast material handling Professionally disassembled and packed Thanks to the excellent build quality of the conveyor system, your material glides smoothly to its destination, even under heavy loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We are happy to provide you with a custom offer or advise you on planning or installation questions. Simply let us know your requirements and site conditions. Take advantage of our many years of experience and excellent network of specialists. We have already successfully implemented projects for companies in a variety of sectors, such as logistics, pharmaceutical industry, crafts, or electronics industry. Together, we will find ways to optimize your processes and material flow cost-effectively and sustainably. We can also offer fully automated sorting technology or supplementary components such as order picking racks or containers.

Condition: used, mileage: 840,053 km, power: 315 kW (428.28 HP), axle configuration: 6x2, color: grey, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, Year of construction: 2015, Equipment: ABS, EBS, air conditioning, For vehicle inquiries, Mr. Seidel will assist you (by phone at ...). Mercedes-Benz Actros 2643 L 6x2 refrigerated box truck with tail lift. A1A: front axle with air suspension; A1D: front axle 8.0 t; A1Z: front axle, cranked design; A2E: rear axle, ring gear 440, hypoid, 13.0 t; A4Z: trailing axle, 7.5 t, unloadable, liftable; A5C: axle ratio i = 2.733; B1B: electronic braking system with ABS and ASR; B1E: high-performance electronic air supply unit; B1F: heater, electronic air supply unit; B2A: disc brakes on front and rear axles; B4A: condensate monitoring for air system; B4K: compressed air tanks, aluminum, for brake system only; B5A: trailer brake, 2-line, brake connections left; B5L: rear trailer brake connection, Duo-Matic + standard; C3B: wheelbase 5,200 mm; C4F: rear frame overhang 2,250 mm; C5I: mounting parts for platform body; C5P: bolted chassis; C6C: single-circuit steering; C6I: regulated power steering pump; C6U: extra stabilizer, rear/trailing axle; C7F: front underrun protection (ECE), aluminum; C7J: battery carrier, batteries side-by-side; C7S: frame clearance, left; C8B: rear axle fenders for 2550 mm vehicle width; C8H: 3-piece fender with EU spray protection; C8I: splash guard (EU), front; C8Y: aerodynamic underbody paneling; C9Y: rear underrun protection (ECE) omitted; D0L: smoker's package; D0S: compressed air outlet in cab; D1C: comfort air-suspension driver's seat; D1N: co-driver's functional seat; D2N: seat backrest release, driver's seat; D3B: comfort lower bunk; D3Q: velour seat covering, driver's seat; D3T: velour seat covering, co-driver's and center seat; D4T: curtain, crossways before bunks; D6F: air conditioning; D6I: residual heat utilization; D6M: additional hot water heater, cab; D7G: stowage compartment cover, driver and co-driver side; D7R: storage flaps above windscreen; D8A: roof hatch/ventilation flap; E0D: battery sensor by Hella; E1C: batteries 2 x 12V/220Ah, low-maintenance; E1M: alternator 28V/150A; E3A: voltage converter 24V/12V, 10A; E3L: 24V/15A socket, passenger footwell; E4A: communication interface (KOM); E4C: additional functions for body builders; E4W: starting aid, speed limit 30 km/h; E5A: switch No. 1 for external body electrics; E6A: 24V trailer socket, 15-pin; E7F: remote control for air suspension; E9F: pre-installation, 2nd control unit, level regulation; E9H: pre-installation, tail lift control; E9I: pre-installation, lift axle switch, trailer/semitrailer; F0F: side module, N3 vehicle; F0X: mirror trim, road vehicle; F1R: L-cab; F1T: L-cab ClassicSpace, 2.30 m, 320 mm tunnel; F2C: floor version, 320 mm tunnel; F2G: cab width 2.30 m; F2M: cab mounting height 420 mm; F3B: comfort cab suspension, steel-sprung; F3W: cab tilting device, mechanical-hydraulic; F4H: cab rear wall without window; F4X: external storage compartment flap, left; F4Y: external storage compartment flap, right; F5L: external sun visor, transparent; F5Y: A-pillar trim; F6C: tinted windscreen; F6I: heated front mirror; F7B: bumper, steel corners; F7C: bumper, center section with tow eyes; F7X: driver cab entry left/right, fixed; F8E: lock system with central locking; F8F: comfort locking system; G2B: gearbox G 211-12/14.93-1.0; G5A: single-disc clutch; G5G: Mercedes PowerShift 3; I4C: axle configuration 6x2 ENA; I5E: 25-tonner; I6A: platform chassis; I6I: vehicle production site Wörth; I6K: heavy series, new generation from 18 t; I6N: heavy vehicles from 18 t, on-road; I6X: air suspension, rear axle,... Rsdpfoyfq Eaex Adaon

Condition: ready for operation (used), functionality: fully functional, The Lutetia T40 tumbler is designed for processing plants seeking to secure their mixing operations with proven equipment. It ensures consistent and controlled blending of mixtures, contributing to uniform quality across all productions. As a result, recipes remain consistent and batch-to-batch variations are minimized. Additionally, the design of the drum promotes continuous movement of the materials, which improves final product homogeneity. This tumbler integrates easily into existing production lines due to its layout, which meets the demands of daily industrial use. The front discharge configuration simplifies end-of-cycle unloading and enhances process throughput. Furthermore, the overall ergonomics make it easy to load the machine, reducing unnecessary handling. This results in more efficient and consistent operator workflows. When Europ’Équipement refurbishes a Lutetia T40 tumbler, all mechanical and functional components are thoroughly checked. This ensures the user gets a reliable machine, ready for immediate integration into their facility. Refurbishment also represents a cost-effective alternative to new equipment, providing an industrial performance level while controlling budgets. Therefore, this solution fits within a sustainable and rational investment logic. Redpeyfn Hbsfx Adaen The Lutetia T40 is suitable for meat processing and value-added food applications that require continuous and repeatable operation. Its capacity meets the needs of medium-sized productions, making it a logical choice for industrial operators aiming to strengthen their production tools and secure their processes. Technical specifications: - Meat and brine capacity: 2,000 – 2,200 kg - Usable volume: 3,675 L - Operating mode: rotating drum - Discharge: large-capacity front mouth - Dimensions (L × W × H): 3,250 × 1,550 × 1,990 mm - Drum diameter: 1,440 mm - Loading height: 1,110 mm - Machine weight: 1,500 kg

Condition: used, functionality: fully functional, Year of construction: 2005, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, pipe diameter (max.): 250 mm, pipe length (max.): 6,000 mm, power: 60 kW (81.58 HP), input voltage: 400 V, Equipment: cooling unit, emergency stop, For sale: TRUMPF TUBEMATIC Tube Laser Cutting Machine – Fully Equipped. The machine was used in industrial production and is in full working condition. Professionally dismantled and preserved in complete configuration. Scope of supply: - Bed and mechanical components - Electrical cabinets with original TRUMPF electronics - Drives, control units, power modules - Cooling system (chiller) - Cable tracks, sensors, wiring, etc. Machine technical specifications: X-axis travel: 6500 mm Y-axis travel: 200 mm Z-axis travel: 150 mm Workpiece sizes: Stock length * For manual loading: 141–6500 mm * For automatic loading: 3000–6500 mm Max. finished part length: 2000 mm Min. tube remnant length: 141 mm Wall thickness: 0.8–6.4 mm Round tube dimensions: Ø20–Ø150 mm Square profile dimensions: 20x20–120x120 mm Rectangular profile dimensions: 20x20 – max. oval Ø150 mm Workpiece weight: Max. workpiece weight: 120 kg Max. workpiece weight for unloading station: 40 kg Max. bundle weight: 4000 kg Speeds: X-axis: 100 m/min Y-axis: 40 m/min Rjdpfx Adjyfnbloaen Z-axis: 40 m/min A-axis: 720 º/s Positioning accuracy1: Position deviation: ±0.2 mm Average range deviation: ±0.06 mm According to VDI / DGQ 3441, the measured length is 1 m. Processing accuracy depends on material type, its preprocessing, dimensions, and position in the working area. Control system: CNC TRUMPF – Siemens Sinumerik 840 D Total weight of the basic machine configuration: 15,460 kg Laser data: TRUMPF TLF CO₂ laser with high-frequency excitation – TLF 2000 Guaranteed max. laser power (programmable in 1% steps): 2000 W Pulse repetition rate: TEM00 Gas consumption: Laser gases *CO₂ – 1 l/h *N₂ – 6 l/h *He – 13 l/h Cutting gases *O₂ – depending on application *N₂ – depending on application Laser cooling: closed circuit Maximum power requirement for full system: 63 kW/h Pneumatic connection: 7–10 bar

Condition: used, HORIZON HT-30, Three-Side Trimmer, used The Horizon HT-30 is a highly robust three-side trimmer known for its exceptional reliability, making it one of the most popular machines in print finishing – a guarantee of quality that often sells out quickly due to high demand. Redpeycfvnofx Adaon Key Features: - Usage: Solo (offline) - User-Friendly: Easy settings via touchscreen - The Horizon HT-30 cuts books fully automatically, eliminating the need for constant operator presence. After loading the books, the HT-30 signals when cutting is complete, ready for unloading and reloading - Memory Function: 40 memory slots for repeat jobs - Operation: Stacks and cuts up to 10 copies simultaneously, fully automatic - Cutting Process: Knife works in two directions for damage-free cuts - Conveyor: Transports trimmed books to a stacking area - Durable Construction: Built for long-lasting use Specifications: - Untrimmed Book Size: Max: 320 x 235 x 51 mm; Min: 152 x 136 x 1 mm - Trimmed Book Size: Max: 305 x 230 x 51 mm; Min: 148 x 134 x 1 mm - Trim Range: Max: 99 mm; Min: 2 mm - Pre-Stack Depth: 300 mm - Speed: Up to 520 books per hour - Pressure: Max 8 kN - Noise Level: Max 70 dB - Dimensions: 2,350 x 1,160 x 1,370 mm - Power Supply: 400V / 50Hz - 1.25kW - Weight: 1,020 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 26,787 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: FANUC, laser type: CO₂ laser, laser source manufacturer: FANUC, laser power: 4,000 W, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, type of cooling: water, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, fume extraction, safety light barrier, Amada Alpha LC2415NT 4 kW laser cutting system with loading and unloading unit, as well as storage tower with 7 storage positions (LKI). Suitable for both single-part and high-volume production. Regularly serviced by technicians; condition according to operating hours is very good. The chiller unit is equipped with a connection for heat recovery. The system has been dismantled, stored in an external warehouse, and can be inspected at any time. Maximum sheet size: 3000x1500mm. Redpfx Aeyfl U Nsdaon

Year of construction: 2010, condition: used, Universal machine for eroding and grinding various PCD tools up to 250 mm in diameter and 200 mm in length in production and service. Accessories: Total enclosure, Extraction N183, Cooling and cleaning device for dielectric, Automatic fire extinguishing device, Loader for erosion disc sets with CNC-controlled swivel arm for loading and unloading 1 set of gripper fingers for workpiece automation HSK 63/SK40 Workpiece carrier adaptation A-axis from SK 50 to HSK 63 A, Rsdpfeycckcsx Adaen 1 exchange element with flange, 1 x flushing kit, Test bar X axis travel: 440 mm B-axis: +/- 15° Y axis travel: 876 mm Z-axis travel: 420 mm E-axis swivel range: 210° A-axis rotation range: 360° workpiece carrier base: SK 50 workpiece length max.: 200 mm Workpiece diameter max.: 250 mm workpiece weight: 15 kg Connected load approx.: 6.7 kW 400V/50 Hz Weight approx: 7000 kg Dimensions W x D x H =: 1987 x 3141 x 2275 mm colour: RAL 7047 Telegray 4/ Color RAL 7045 Telegray 1

Year of construction: 2009, condition: ready for operation (used), - USED - ELECTRICAL AUTOMATIC PANEL BENDER FOLD LENGTH: 2150 mm MAX FOLD HEIGHT: 200 mm MIN LENGTH/WIDTH BETWEEN FOLDS: 160-350 mm TONNAGE: 32 ton CONTROL UNIT: SIEMENS 840D WEIGHT: 30000 Kg OVERALL DIMENSIONS: 8500 x 7000 x 2850 mm ACCESSORIES: AUTOMATIC TOOL CHANGE ; MANIPULATOR ; REVERSE BENDING CYCLE ; SHEET METAL CENTERING SYSTEM NOTE: NO 2 ASP/700 CNC AUXILIARY AXIS; ADDITIONAL UPPER TOOL; LOADING/UNLOADING SYSTEM Rodpfxovhc Stj Adaon

Year of construction: 2019, condition: used, General Information: The MobyLift is a handy tool for ergonomically lifting, transporting, and setting up products such as doors, tabletops, and other panels. From a work-related perspective, the MobyLift is a responsible investment. It is easy to use, reduces the number of damaged products, increases productivity, prevents back pain, and thus reduces work absence. The MobyLift was developed in collaboration with reputable assembly companies, combining their knowledge and experience with our know-how to create a practical tool. The MobyLift MC-120-H consists of the following modules: · Mobile base · Electric lifting and tilting system · Automatic vacuum control · Wireless electric operation. The MobyLift MC-120-H is designed so that it can be quickly and easily disassembled into a number of portable modules after being switched off. This makes it very convenient to load and unload the MobyLift or to move it to another floor or building. The MC-120-H is supplied with a 24 V battery charger for the electric lifting and tilting system and is equipped with a charge level indicator to continuously monitor the battery status. Specifications: - Lifting capacity: 120 kg - Lifting height: 100 cm, electrically operated - Tilt angle, front - rear: 37°, electrically operated - Swivel angle of the head joint on both sides: 90° - Rotation angle of the head joint: 360°, continuous - Side shift: 7 cm - Weight: 150 kg, can be disassembled into modules Rsdpfxov Dauwj Adasn Storage location: Nattheim

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Rjdpovvkipefx Adaen

Condition: new, Year of construction: 2024, GG06LX The only backhoe loader with these dimensions on the market. The machine is characterized by a high-efficiency engine, the new professional backhoe loader: GG06 LX from the international brand Günter Grossmann. Like all Gunter Grossmann machines, the machine has a company warranty so you can work worry-free. The GG06 LX model is a great machine for construction, electrical and plumbing companies. Backhoe loaders are manufactured based on advanced technology that has been used in our company for many years. We have all spare parts for machines of our brand in stock in Europe Price 16500 EUR (excl. VAT) Backhoe loader equipped with 2 buckets SPECIFICATIONS Brand: Gunter Grossmann Model: GG06LX Gross weight: 2280 kg Engine: Kubota D1105 Fuel type: diesel Number of cylinders: 3 Rated speed: 3000 (r/min) Rated power: 18.4 (kw) Displacement: 1,123 (L) Cooler: yes Engine oil quantity: 4L Excavator hydraulic pump: Parker USA Hydraulic pump loader: PWG Italia Hydraulic oil loader capacity: 84 L Excavator hydraulic oil quantity: 42L Hydraulic tank capacity: 22 (L) Hydraulic tank capacity: 22 (L) DIMENSIONS Length: 4900cm Width: 1150 cm Height: 2350cm Wheel specifications : 26×12.00-12 26×12.00-12 Loading box width: 1150 mm min. clearance: 155 mm driving speed: 12 (km/h) min. turning circle: 2400 (mm) WORKING RANGE Body capacity: 0.6 (m3) Rodpfjp Aru Rjx Adaen Load capacity: 600kg Loading height charger: 2000 (mm) loader digging depth: 240 (mm) Loader bucket lifting time at full load: 8 (s) Bucket lowering time: 4 (s) Nominal bucket capacity: 0.08 (m3) Excavator maximum digging height: 3200 (mm) Excavator unloading height: 1990 (mm) Excavator Max. Digging depth: 2490 (mm) Excavator tilt angle (left/right°) 52/59 Excavator rated pressure: 20 (MPa)

Condition: new, functionality: fully functional, mileage: 1 km, power: 18.4 kW (25.02 HP), fuel type: diesel, empty load weight: 1,660 kg, maximum load weight: 1,000 kg, overall weight: 1,660 kg, tire condition: 100 %, color: yellow, gearing type: automatic, emission class: euro5, number of seats: 1, Year of construction: 2025, operating hours: 1 h, operation weight: 1,660 kg, lifting power: 1,000 kg/m, chain condition: 1,000 %, drive condition: 1,000 %, The W1000 dump truck is a compact, efficient, and highly maneuverable construction vehicle, engineered for transporting bulk materials on construction sites, farms, and in municipal operations. Its robust build, powerful engine, and excellent agility ensure superior performance even under challenging terrain, guaranteeing both operator safety and productivity. Engine and Drivetrain Powered by a reliable three-cylinder Perkins engine rated at 18.4 kW, the machine delivers optimal performance with low fuel consumption. Its 30-liter fuel tank supports extended operation without frequent refueling. Power is transmitted to 10.0/75-15.3 wheels, providing outstanding traction and stability on diverse surfaces. Performance and Mobility With a top travel speed of 14 km/h and a climbing ability of up to 30%, the W1000 operates effectively across varied terrain. Its payload of 1000 kg makes it ideal for transporting medium-weight materials in daily construction and agricultural applications. Dimensions and Construction The dump truck's compact dimensions—overall length 3320 mm, width 1160 mm, and height 2150 mm—allow for easy maneuverability in confined spaces. A wheelbase of 1530 mm and minimum ground clearance of 227 mm ensure excellent stability and grip, even in demanding conditions. The maximum dump height is 2327 mm, while the bucket height at rest is 935 mm. The bucket's forward projection of 1217 mm enables safe and precise material unloading. A turning radius of 1410 mm ensures exceptional maneuverability. Technical data: Machine weight: 1660 kg Rsdpfx Asxr Rvwodasn Lifting capacity: 1000 kg Engine brand: Perkins Rated power: 18.4 kW Engine type: Three cylinder Hydraulic tank capacity: 30 L Fuel tank capacity (diesel): 30 L Max travel speed: 14 km/h Bucket capacity: 0.5 m³ Tyre size: 10.0/75-15.3 Tyre width: 264 mm Turning radius: 1410 mm Distance to center of gravity at max gradient: 335 mm Distance between front and rear tipping axles: 367 mm Gradeability: 30% Maximum tipping angle of the bucket: ±90° Length: 3320 mm Width: 1160 mm Height: 2150 mm Wheelbase: 1530 mm Minimum ground clearance: 227 mm Bucket height at rest: 935 mm Forward reach of the bucket: 1217 mm Maximum dump height: 2327 mm Diagram A Total length 3320 mm B Wheelbase 1530 mm C Minimum ground clearance 227 mm D Dumping height 935 mm E Axle height 1033 mm F Bucket front edge height 1217 mm G Maximum dump height 2327 mm H Dumping angle 72° I Overall height 2400 mm J Overall width 1160 mm K Bucket width 1150 mm L Bucket length in tipped position 1410 mm M Safe forward discharge distance 367 mm N Safe lateral discharge distance 335 mm

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 30 h, Equipment: centralized greasing system, dust extraction, emergency stop, fume extraction, safety light barrier, Tube Laser Cutting System Ideal for Entry-Level Applications. Simplicity meets efficiency with the Durma HD-TC COMPACT 60250 entry-level tube laser. Perfect for workshops, metal fabricators, and others looking to step into tube laser processing, this laser offers straightforward operation, reliable performance, and excellent value for money. Discover how the Durma HD-TC COMPACT 60250 can enhance your production with precise cuts and user-friendly technology, adding value to your operation. 3 kW Laser Power Maximum Sheet Thicknesses: - Mild Steel: 12 mm - Stainless Steel: 6 mm - Aluminium: 6 mm - Copper: 3 mm - Brass: 6 mm Capacity: - Maximum Tube Diameter: Ø250 mm - Maximum Square Profile Dimensions: 160x160 mm - Maximum Rectangular Profile Dimensions: 200x150 mm Redsrkntcopfx Adasn - Minimum Tube Diameter: 16 mm - Maximum Material Length: 6000 mm - Minimum Remnant Length: 65 mm - Unloading Length: 3000 mm - Semi-automatic unloading unit: optional (6m) - Maximum Material Weight: 58 kg/m - Maximum Total Workpiece Weight: 350 kg - Profile types that can be cut: Round, square, rectangular, elliptical - Open profile types that can be cut: I, C, L - Maximum open profile dimensions: 240x240 mm Dynamics: - X-Axis: 40 m/min - Y-Axis: 94 m/min - Z-Axis: 30 m/min - A-Axis: 510 °/s Accuracy: - Positioning Accuracy: ±0.2 mm - Positioning Variation: ±0.05 mm - Tube Center Detection with Capacitive Sensor: Yes Additional Available Configurable Options. LASER POWER: - Upgrade to DURMA LASER SOURCE BRILASE 4 kW ADVANCED fiber laser source (incl. chiller) + Durma cutting head - Upgrade to DURMA LASER SOURCE BRILASE 6 kW ADVANCED fiber laser source (incl. chiller) + Durma cutting head OPTIONS: - Air filtration system (40 bar N₂ + 16 bar O₂ + 16 bar Air) - Air filtration system (40 bar N₂ + 16 bar O₂ + 40 bar Air) - CNC oscillating head (+/- 45°) - Semi-automatic front loading system - Unloading table (6m) with conveyor - Unloading table (3m) with conveyor - Additional dongle software - Transformer 220, 440, 575V SOFTWARE OPTIONS: - Durma Cloud License + D-Mobile + Smart Watch - STEP file importer

Condition: used, Year of construction: 2010, functionality: fully functional, Machine data • Gantry-type machine with stationary table and moving bridge for minimal footprint • Base, bridge, and bridge columns made of steel, welded in one piece, stress-relieved and machined • Main structural components consist of ribbed welded assemblies, optimized for the best possible rigidity-to-weight ratio, vibration damping, and high acceleration • Every machine design is verified and optimized using finite element analysis (FEA) to ensure maximum quality, performance, and safety • Easily accessible machine table enables simple loading and unloading with a forklift or overhead crane • Precision ground linear guides with high preload and additional cover strip on all axes for optimal chip protection • Brushless digital A/C servo motors and controllers on all axes • Single-sided (centered) drive on the X-axis (gantry drive) • Rack and pinion drive on X and Y axes • Precision ball screw spindle with double bearing support on Z-axis • Precision planetary gearboxes with minimal backlash • Fully enclosed cable drag chains to protect cables from chips and dust • High-quality shielded cable drag chain wiring for maximum reliability against interference and downtime • X-axis machining area: 1,540 mm Rjdpfx Asybb N Ijdaen • Y-axis machining area: 1,540 mm • Z-axis clearance: 150 mm • Z-axis travel: 240 mm • Network connection via Ethernet • Remote maintenance via Internet FlexiCAM control system • DIN-ISO 66025 G-code compatible • Includes TCP/IP network interface • 256 MB RAM • Simple operation via handheld control unit with display Spindle with manual tool change • Power consumption: 5.6 kW • 5,000 to 24,000 RPM, infinitely programmable • Cooling via integrated electric blower Dust extraction for manual tool change • Hose connection diameter: 120 mm Work table • T-slot profiles Safety features • CE compliant according to DIN EN 13849 • Includes EMC filter, Emergency Stop • Light curtain system controlled by the machine controller

Year of construction: 2014, condition: ready for operation (used), number of axes: 2, This Kocevar & Sons R-94-K0LQ-320/750-DD160 was manufactured in 2014. It features a rotary table with NC-controlled indexing and direct drive, motorized spindles for operations like drilling and milling, and an automatic loading/unloading system. Ideal for high-volume serial production of automotive or industrial components. For more information about this machine, please reach out to us. Rsdpfx Adeybbttjajn • Axis configuration: • Rotary indexing axis (C-axis/table) • Linear axes per machining unit: typically X/Z (some units may include Y) • Total axis count: configuration-dependent (usually 6+ overall) • Rotary table: • Indexing type: NC-controlled • Indexing accuracy: high-precision (seconds range) • Number of stations: layout-dependent (e.g., 6–12) • Table drive: direct drive (DD160) • Machining units: • Operations: drilling, tapping, milling, boring • Spindle type: motorized spindles • Spindle speed: high-speed production range (application-specific) • Spindle orientation: radial/axial depending on station • Workpiece capacity: • Max workpiece diameter: approx. 320 mm • Max machining length: approx. 750 mm • Control system: • CNC: Siemens / Fanuc (configuration-dependent) • PLC-based automation • Machine features: • Integrated clamping systems • Cycle-time optimized for series production • Application: • High-volume serial production • Automotive / industrial components • Dedicated part machining (not flexible like a machining center) Additional equipment • Automatic loading/unloading (automation)

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Required scope of delivery for push-through protection: 01x U-profile, used Material color: sendzimir galvanized total length: approx. 2.765 mm profile dimension: C: 60x40x8 mm including 2 agraffes Further information: Shelving system: SSI Schäfer suitable f. clear width: approx. 2.700 mm 06x hexagon bolt: M8 x 35 mm 06x Toothed nut: M8 06x washers: M8 General information about the item: This item is offered for pickup only. Any additional transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the Rsdpfoh Ekdfsx Adajn requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: excellent (used), functionality: fully functional, Year of construction: 1990, operating hours: 33,590 h, load capacity: 16,000 kg, Equipment: adjustable boom, cabin, gripper hydraulics, For sale we offer a powerful Svetruck TMF 12/9 forklift with a net weight of 50 tons and a load capacity according to the specification of 12t (in reality without a problem with a lifting capacity of 20 tons) lifted to a height of up to 7.5 meters. Redpfov Rbn Eex Adasn Forklift / Reach Stacker from new with one owner in the Port dealing with unloading and loading of wooden logs onto ships. Svetruck is prepared for transport. It currently has a dismantled gripper (possibility of installation at this price). -====••==== 2 The first photos show the equipment originally assembled! We have the arm and the rest of the equipment. - We also purchased an interchangeable arm from ELME from 2004 thanks to which you can transform this truck into a Reach Stacker lifting sea or land containers. We have the original arm on our yard (scissors for transporting bales as in the first photo) We also have a gripper for full containers ELME Spreader We offer assistance in assembling the arm at our place or at the customer's The cost of such an operation is 2000 Euro. - We will also help with conversion to Reach Stacker (container ship) We have a gripper on site at our place. ---- Forklift Svetruck SVE-TMF 12/9 HB - 1990 Dimensions: 6.8 m × 3.53 m × 3.9 m Model: SVE-TMF 12/9 HB Net weight: 50000 kg Year of production: 1990 Lifting height: 7500 mm Lifting max 12t Lifting at the highest point max 9t Cabin equipment: Radio Air conditioning + Webasto CB Radio 2 Seats = Engine Brand Volvo Type inline Power 393 HP (289 kW) Fuel diesel Capacity 12130 cm³ Number of cylinders 6 ----- Attention! The given price is in Netto value and is valid for Export and for companies. A large discount is possible for an individual customer - We invite you to contact us directly by phone, so that you can get your best price :) — After price negotiations, we are able to record a video or perform a computer or paint meter test for a determined customer, in order to calmly buy the equipment remotely. ===== Of course, we encourage you to come for an inspection, but if it is not possible, this form of purchase will be available, which guarantees a safe form of purchase. - Dear Customer! If you want to buy DELICATE Equipment, THEN WE INVITE YOU TO US. If YOU ARE ONLY GUIDED BY PRICE, and parameters such as: ACTUAL MILEAGE OR ACCIDENT FREENESS are SECONDARY VALUES for you, then in our humble opinion it is a WASTE OF YOUR AND OUR TIME. ——— We provide professional, free advice and are characterized by an individual approach to the Client. We will always give you reliable advice even if you are in arrears with payments or are in the Bik and Krd databases. - We have attractive credit or leasing conditions. Detailed information about financing will be provided by our representative Mr. Tomasz at tel.: 667910542 ===== THIS ANNOUNCEMENT IS FOR INFORMATION ONLY AND DOES NOT CONSTITUTE AN OFFER IN ACCORDANCE WITH ART. 66, § 1. OF THE CIVIL CODE. OUR COMPANY IS NOT RESPONSIBLE FOR MINOR ERRORS OR INCOMPLETE INFORMATION CONTAINED IN THE ADVERTISEMENT OR OUT-OF-DATE ADVERTISEMENT.

Condition: used, mileage: 273 km, power: 184 kW (250.17 HP), first registration: 12/2025, overall weight: 17,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: automatic, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, New vehicle: M.A.N. TG3 18t 4x4 all-wheel drive special hooklift truck, unregistered. Payload: 9 tonnes, suitable for container lengths from 4.0 m to 5.50 m. Payload: 9 t, wheelbase: 4.50 m, 4x4 all-wheel drive with 3 differential locks, single tires, high chassis design, automatic transmission, air conditioning, auxiliary heater, tire pressure monitoring system, trailer coupling, and much more. Includes one year of MAN manufacturer’s warranty from the date of registration. Specification: - TN double cab with 3 seats - High chassis design - Wheelbase: 4,500 mm - Single tires - MAN D0836 LFLBN engine with 250 HP - Euro 6e - 4x4 drive - Differential locks on front and rear axle - Unladen weight: 7,988 kg - Payload: 9,012 kg at GVW 17,000 kg Rodpfsxdgm Njx Adajn - Hiab XR 10 S hooklift - Suitable for container lengths from 4.00 m to 5.50 m - Hydraulically extendable underrun protection at the rear - Hydraulic container locking system - Hook height: 1.57 m - Hooklift control unit with cable extension - 2 additional frame support brackets - 2-step control for loading and unloading - MAN G102 transfer case with on-road and off-road mode - Electronic transfer case “VSM” management - MAN PowerMatic 08.13 OD automatic transmission - PTO OPN0L Medium Duty ISO 21308 - MAN Idle Speed Driving function - MAN TipMatic Efficiency driving program - MAN TipMatic Offroad driving program - MAN TipMatic Emergency driving program - Air conditioning - Additional water heater, 4 kW - Ringfeder towing hitch type RF40/G150B with air connections - Permissible gross train weight: 28,000 kg - Trailer load: 16,500 kg - Front and rear axle on leaf springs - Front axle 9,000 kg as a driven planetary axle with selectable drive, differential lock - Rear axle HP-1333, 13,000 kg, single tires, with differential lock - Axle ratio, i=6.00 - Stabilizer for front and rear axle - Shock absorbers on front and rear axle - Electronic braking system (EBS) - High-performance MAN EVBec engine brake - MAN EasyStart hill-hold assist - Drum brakes on front and rear axle - ASR, ESP, ABS - Emergency brake assist (EBA) - Front Detection - Tire pressure monitoring system (TPM) with tire temperature display - MAN AttentionGuard driver alertness system - Preparation for alcohol interlock - Cruise control - Multifunction steering wheel - 150-liter fuel tank - Roof hatch - LED daytime running lights - LED rear lights - Stone guard for front headlights - Electrically adjustable and heated exterior mirrors - Premium air-suspended driver seat, Plus package for passenger seat - Air-suspended comfort driver seat with lumbar support and shoulder adaptation - Air-suspended comfort center seat with integrated seat belt system, set back - Air-suspended passenger comfort seat New vehicle, unregistered, with MAN manufacturer’s warranty. Net price plus 19% VAT. Attractive financing options available upon request. All details provided without guarantee. Errors and prior sale excepted. Internal vehicle number: 2562-Z

Condition: new, mileage: 273 km, power: 184 kW (250.17 HP), overall weight: 17,000 kg, fuel type: diesel, color: red, axle configuration: 2 axles, gearing type: automatic, Equipment: ABS, air conditioning, all wheel drive, electronic stability program (ESP), parking heater, New vehicle M.A.N. TG3 18 ton municipal 4x4 all-wheel drive special hooklift, without registration, designed for fire brigades, technical relief organizations, emergency services, and disaster response. Payload: 9 tons. Compatible with container lengths from 4.00 m to 5.50 m. All-wheel drive (4x4) with 3 differential locks, wheelbase 4.50 m, single tires, high clearance build, automatic transmission, air conditioning, auxiliary heater, tire pressure monitoring system, trailer coupling (AHK), gross combination weight (GCW) 28 tons, 100 km/h road speed, and no torque limitation for full engine performance, among many other features. Supplied with a 1-year MAN manufacturer’s warranty from date of registration. Specification: - TN double cab with 3 additional seats - High clearance, extreme off-road capability - Wheelbase: 4,500 mm - Single tire setup - Engine: MAN D0836 LFLBN, 250 hp, without torque limitation - Euro 6e emissions standard - 4x4 drive - Differential locks on front and rear axles - Unladen weight: 7,988 kg - Payload: 9,012 kg at GVW 17,000 kg - Hiab XR 10 S hooklift system - Container lengths from 4.00 m to 5.50 m - Hydraulically extendable rear underrun protection - Hydraulic interior locking - Hook height: 1.57 m - Hooklift control unit with cable extension - 2 additional frame supports for the tipper - 2-stage control for loading and unloading - MAN G102 transfer case with road/off-road mode - Electronic transfer case management (VSM) - MAN PowerMatic 08.13 OD automatic transmission - PTO OPN0L Medium Duty ISO 21308 - MAN Idle Speed Driving function - MAN TipMatic Efficiency driving program - MAN TipMatic Offroad driving program - MAN TipMatic Emergency driving program - Air conditioning - Auxiliary water heater, 4 kW - Trailer hitch Ringfeder RF40/G150B type with air connections - Permissible GCW: 28,000 kg - Towing capacity: 16,500 kg - 2 additional heavy-duty towing eyes at the front bumper - Additional front compressed air connection - Front and rear axles with leaf suspension Rsdpfxsxdgmio Adaon - Front axle: 9,000 kg, planetary hub drive, selectable, with diff lock - Rear axle HP-1333, 13,000 kg, single tires, with diff lock - Axle ratio: i=6.00 - Front and rear stabilizers - Shock absorbers on both axles - Electronic braking system (EBS) - High-performance engine brake MAN EVBec - Hill-start assist MAN EasyStart - Drum brakes front and rear - ASR, ESP, ABS - Emergency brake assist (EBA) - Front detection - Tire pressure monitoring system (TPMS) with tire temperature display - Driver alertness monitor MAN AttentionGuard - Pre-installation for alcohol interlock - Cruise control - Multifunction steering wheel - 150-liter fuel tank - Roof hatch - LED daytime running lights - LED rear lights - Stone chip protection for front headlights - Electrically adjustable and heated exterior mirrors - Premium air-suspended driver seat package, Plus co-driver seat package - Air-suspended comfort driver seat with lumbar support and shoulder adjustment - Air-suspended center comfort seat with integrated belt system, offset rearward - Air-suspended comfort co-driver seat Brand new vehicle without registration and with MAN manufacturer warranty. Price NET plus 19% VAT. Attractive financing options available upon request. All details provided without guarantee. Error and prior sale reserved. Internal vehicle number: 2562-K

Condition: used, mileage: 42,950 km, power: 105 kW (142.76 HP), first registration: 06/2019, fuel type: diesel, CO₂ emissions: 201 g/km, fuel consumption (urban): 9.1 l/100km, fuel consumption (extra-urban): 7 l/100km, fuel consumption (combined): 7.7 l/100km, color: orange, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, central locking, electronic stability program (ESP), immobilizer system, second-hand vehicle warranty, soot filter, Special equipment: PAYLOAD 1305KG FRONT DRIVE FWD Storage compartment above windscreen, storage compartment below dashboard on passenger side, towing eye at the rear, electric outside mirror. adjustable and heated, both, chassis: stabilization level I, steering wheel (steering column mechanically adjustable), radio preparation, front mud flaps, seats in the driver's cab: passenger double seat, reinforced front axle, heat-insulating glazing Other equipment:* 2603Paint color deep orange MB 2603 * 362L * A50Front axle with increased load capacity * BH2Control code for hydraulic unit variant 1 * BK2Control code for wheel brake configuration 2 * C910 * CB7Stabilization level I * CL1Steering wheel adjustable in inclination and height * ED1Fleece battery 12 V 70 Ah * ED8Electrics preparation, parameterizable special module * ER0Radio, preparation * ES0Start-up aid - contact * EY5Mercedes-Benz emergency call system * EY6Breakdown management * F68Exterior mirrors heated and electrically adjustable * F910 * FF5Storage above windscreen * FHSDriver's cab * FJ4Storage compartment under cockpit * GE96-speed manual transmission * H20Heat-insulating glass all around * HI1Climate zone 1 (cold/comfort) * IC1Series C907/C910 Sprinter * IF0Series C910 VS30 FWD * IF3Chassis with driver's cab * IG4Standard * IG5Basic * IK0Complete vehicle * IL1Domestic (Germany) * IL5Left-hand drive * IM0Solid paint with colorless top coat * IS3Wheelbase 3924 mm (BM-forming code) * IT4 3.5 ton truck * J10Speedometer km/h * J58Seat belt warning device for driver's seat * J65Outside temperature display * JA8Crosswind assist Rodpfx Aeqafyfedaon * JG0Shift point indicator * JH3Communication module (LTE) for digital services * JI6Start-up distance, maintenance interval 40,000 km * KP6Emission control SCR Generation 3 * L * L07Outline lights * L94Parking light eliminated * LA2Headlight assistant * LB1Side marker lights * LE1Adaptive brake light * LX5Europe * MI2Engine OM 651 DE 22 LA 105 kW (143 HP) * MR6Emissions class Euro 6c N1 * P02Steel platform with aluminum side walls * P2RBasic package * P47Mud flaps at the front * Q11Longitudinal member reinforcement * Q67Rear towing eye * RF1Tire brand Continental (10) * RM7Summer tires * RN5Tires 225/65 R16 C * RR0Tires, optimized for rolling resistance * RS3Steel wheels 6.5 J x 16 * RZ1Wheel brand mefro wheels * S02Driver's seat * S22Armrest for driver's seat * S23Passenger seat two-seater * S94Power supply GZE * SA5Driver's airbag * VF7Fabric Maturin black * WB9Factory tax code * WM4Factory tax code * WM9Factory tax code * X30Registration certificate, part II * XC9COC papers * XG7Without loading/unloading 3,500 kg * XM1Noise reduction * XO9Mercedes-Benz Mobilovan with DSB and GGD * XU1Signs/printed materials in German * XV0Tax code - BZM inspection * XZ0Model generation 0 * Y10First aid kit * Y44Warning triangle * Z1NRegistration N1 * Z2ECountry version EU - EFTA - UK * Z4WManufactured in Ludwigsfelde * 260ULaint color deep orange MB 2603 Adaptive brake light, driver's side airbag, traction control (ASR), washer fluid level indicator, outside temperature indicator, brake assistant, roof paneling in the driver's cab, automatic switch-on for driving lights, electronic brake force distribution (EBV), driver assistance system: crosswind assistant, 6-speed gearbox - FSG, body/structure: flatbed, keyless start, communication module (LTE) for digital services, fuel tank: main tank 65 liters, headlight range control, truck registration, side marker lights, Mer

Condition: used, Year of construction: 2014, machine/vehicle number: 0101-250007, The reconditioned Behringer Eisele HCS 160 MF metal circular saw is a fully automatic straight-cutting machine. The HCS160MF is a high-quality, robust machine that has been specially designed for professional use and for the highest cutting performance in metal processing. The saw is also designed for multi-shift operation. It offers an excellent combination of performance, precision and versatility, making it particularly suitable for larger series. The HCS160MF fully automatic saw includes a comprehensive material loading and unloading system. The loading magazine is positioned on the infeed side, while on the outfeed side, short pieces can be pushed off the belt via the unloading device at three positions through a pusher into the containers provided for this purpose. The system is in very good condition. This HCS 160 MF straight cut circular saw consists of: Rodpsxl R Nkofx Adaon Behringer Eisele HCS 160 MF straight cut circular saw Feed gripper for material transport in the saw Behringer Eisele loading magazine Behringer Eisele unloading device Siemens SPS control system Chip conveyor

Condition: like new (used), Year of construction: 2021, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 4,000 mm, table width: 2,600 mm, table length: 4,000 mm, complete for sale or in sections: CLEAR Coat TOUGH Coat ProfiTech controll EPG Spint High Coat PEA-C4 with CoronaStar colour powder coating flat material Glass size max.: Length 3600mm x width 2600mm. 90m long with installed 1100 kW power 2 tilting table, light handling crane, vertical washing machine, powder booth for coating flat material, demi water plant and so on Pos. 1 Loading Station with Lifter Pos. 2 Vertical Inlet Transport WM Pos. 3 Vertical Washing Machine with Drying Pos. 4 Vertical Inspection Transport with Activation Section Pos. 5 Tilting Table with Horizontal Transport and Vertical Inspection Pos. 6 Pre-Heating Section Rjdpfx Aotwn Ipsdasn Pos. 7 Powder Section with Belt Cleaning Pos. 8 Cleaning Transport Pos. 9 Gel Oven Pos. 10 Alignment Oven Pos. 11 Laminator Pos. 12 Cure Oven Pos. 13 Cooling Section Pos. 14 Tilting Table with Vertical and Horizontal Transport Pos. 15 Vertical Inspection station Pos. 16 Unloading Station Pos. 17 Electrical Distribution Pos. 18 Demi-water plant for the supply of the washing machine