Back hoe loader buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
6

Backhoe loader Terex FERMEC 860

Belgium - WaregemBelgium dealership location
6190 km
2003
used
Field of application: Construction Make of engine: Perkins 1104C Bbwpcvo7d9 EPA marked Transport dimensions (LxWxH): 7.45x2.4x3.8 more
14
Working time: 13,209 mth Operating weight: 8000 kg Drive type: 4x4 Engine power: 68.5 kW Purpose: Terex 860SX backhoe loader is an earthmoving machine that performs both excavator and loader functions. Backhoe loaders are usually based on the construction of a wheeled, less tracked tractor. Juwfdm Equipment Loaded bucket, telescopic arm, 80 cm wide excavator bucket, folding rear supports, manual gearbox. more
6
Schaeff Wheel loader with backhoe Type: SKB 800 A Engine: Deutz-four-stroke diesel engine Type: F4 L 912 - air cooled Power: 54 KW at 2,500 rpm Rg3z8vm3p Torque: 230 NM at 1.600 U/min Tyres: 14.5-20 MPT 10 PR Max. Total weight: 8.000 kg Anbaubagger: HT 21 more
6
Power: 48,5 kW Operator station: sitting Cabin: closed, heated Ignition type - automatic Engine type - diesel Permissible total weight: 7 320 kg Producer: SAMPIERANA S.p.a., Italy Bbb0sip9tv Including a spoon, and a digging spoon. more
6
Manufacturer: XCMG Construction Machinery Co. LTD Model type: MM 69 Mileage: 374 hrs Year: 2014 Mt9880 Technical parameters: dimensions - Length 8.00 m - Width 2.31 m - Height of 3.42 m Engine power: 74 kW Charger: - Capacity: 2000 kg - Loading height: 2 650 mm - Bucket approx. 1 m3 - Excavator: - Maximum digging depth: 4 400 mm - Bucket capacity: approx. 0.4 m3 - The width of the bucket (drains) - 1.2 m Equipment: - Heated cabin - A compression ignition engine - Automatic Transmission - 4x... more
2
vermutlich Forkardt-Roehm Umkehr-Aufsatzbacken fuer Kraftspanndrehfutter 3 Satz weiche Aufsatzbacken Lbpfsykca lg; ca. 103,5 mm B; ca. 50 mm Hoehe unterschiedlich v.42 mm bis 80 mm Alle Backen mit Nutenbreite: 21 mm Verzahung: 90° und mit Nutenschrauben und Nutensteinen komplett versehen more
6
CLOSED gripper for round timber excavators, BJ. 2007, 2011 weight 2to. PAYLOAD 6TO Xpb2290yj LOADED EURO 8 000.--+ VAT EX WORKS more
6
The technical data, please refer to the pictures / drawings. On request I send to you more pictures. Ck7m9pom more
5

Block back cutter j.c. Ostheim OHG FA 80

D - BrandenburgGermany dealership location
6679 km
1982
used
Block back cutter notching machine working width 500 mm maximum block thickness 80 mm Notch depth adjustable 380 volts Two-hand operation Heodh99su the block is hydraulically pressed and held internal milling dust extraction more


back hoe l...
every day

New machines via email!

Be informed!
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Cs0xki8o GOODSPEED - COYER CP-168 A Back Knife Lathe -- Manufactured machine authorized by GOODSPEED.° 26.7" Length cap., and 1/2" - 3.9" max. dia. [...] with: -- 10 HP Spindle motor, 1,800 - 3,200 RPM spindle speed adjustable by pulley change. -- 3 HP hydraulic feed motor, 2-speed carriage. -- Swiveling control panel, PLC sequence controller built into separate control cabinet. -- (3) pressure gauges, automatic way & support collar lubrication. Featu... more
4

Gear Grinding Machine HOEFLER MEGA 1600

ab StandortGermany dealership location
6394 km
2003
used
max. wheel diameter 1600 mm gear width 980 mm max. module 30 min. module 1,5 root circle dia. min. 80 mm grinding stroke max. 1000 mm [...] angle 35 ° double strokes/min. 20 - 200 grinding wheel peripheral speeds: 35 - 45 m/sec grinding wheel diameter 300/400 mm roll feed 90-900 mm/min table diameter 1300 mm table hole 300 mm depth of hole 300 mm workpiece weight 8000 kg grinding spindle drive 20 kW control SIEMENS 840C total power requirement 70 kW weight of the machine ca. 42 t dimensions ... more
5
diameter:65 mm length:3000 mm total power requirement: kW dimensions of the machine ca.:5800 x 950 x 1600 m Feeder travel speed:335 mm/sek feed speeds:335 mm/min return speed:335 mm/sek Loading-Time:30 sek Required air-pressure:6 bar weight of the machine ca.:1,2 t Ptmrmu more
5
power density 0.18 cm³/rotation operating pressure 20 bar maximum (technically) Meef9 pressure adjustable operating voltage 12V DC tank capacity approx. 6 litres nominal speed 3,300 rotations/min electrical power 0.35KW space requirements length - 282 x depth - 230 x height - 400 mm weight approx. 14 kg more
6
max. wheel diameter 0 mm gear width 0 mm max. module 40 L7zfd min. module 1 weight of the machine ca. 0,05 t dimensions of the machine ca. 0,5x0,3x0,3 m pitch and run-out tester unit for gear measuring machines. more
1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. Bbuqs77g0j 74.8" (1900mm) max. between centers and 8-5/16" (210mm) height of center over bed, max. copying dia. of 3.5" (90mm) with standard steady rest. 5.5 Hp spindle motor & 3 Hp hydraulic motor. Automatic work cycle sequencing with electronic control. -- Electronic drive from 1000 - 500 RPM spindle speeds; Hydraulic variable speed carriage. --Equipped with: One Hydraulic tracing units; 3.5" max. square part size. --Includes: (2) backnife holders an... more
6

Gear Grinding Machine HOEFLER MEGA 1600

Düsseldorf Halle 3Germany dealership location
6394 km
2000
used
max. wheel diameter 1600 mm gear width 980 mm max. module 30 min. module 1,5 root circle dia. min. 80 mm grinding stroke max. 1000 mm [...] angle 35 ° double strokes/min. 20 - 200 grinding wheel peripheral speeds: 35 - 45 m/sec grinding wheel diameter 300/400 mm roll feed 90-900 mm/min table diameter 1300 mm table hole 300 mm depth of hole 300 mm workpiece weight 8000 kg grinding spindle drive 20 kW control SIEMENS 840C total power requirement 70 kW weight of the machine ca. 42 t dimensions ... more
5
turning diameter:1250 mm weight of the machine ca.:780 kg height:180 mm thickness of jaw:80 mm B837isjc more
2
faceplate diameter 650 mm Gghu2cz numer of jaw 4 Stück thickness of jaw 100 mm height 115 mm total power requirement 0,00 kW weight of the machine ca. 0,10 t dimensions of the machine ca. m more
1
Mobile dust extraction (2.100 m³/h) SMA-REF-6249 Type: mobile extraction units Manufacturer: Hoecker Polytechnik Model: Gr. 2 Year: 2003 Motor: 1,5 kW Working range: Volume flow: 2.100 m³/h Speed: 2.800 rpm M08kl Suction port: 140 mm Container: 180 l Condition: ready for action Location: Western Germany Feantures: 3 identical units available price is per piece Availability: on demand Terms of delivery: ex works Terms of payment: 100% before dismantling/loading more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. 3y8emakf LOBO-COYER 'CP-168A' Hydraulic Copy Lathe. 26 1/2" length cap. with 4" min. length of stock and 1/2" - 4" max. diameter cap., hopper feed with automatic chucking, square or round stock can be hopper fed. -- Equipped with: 7.5 HP Spindle motor, 1,800 - 3,200 RPM spindle speed adjustable by pulley change, 3 HP hydraulic motor. -- Complete with: Swivel control panel & safety wire mesh accross the front of machine; unit is capable of producing ... more
6

HOESCH DR 1400

BabberichNetherlands dealership location
6320 km
1992
used
Gvjueo more
3

Windermachine Backservice BSM Croissantroller

BabenhausenGermany dealership location
6588 km
2017
as good as new (ex-display)
Croissant wrapper wrapping machine BackService Milbrandt Model: BSM Croissantroller Stainless steel construction Tableware for the efficient production of croissants 3nrjoumbf easy handling For unfilled croissants Output up to 700 pieces / hour Connection 400V, 200 watt, 16A-CEE plug Mass: 300 x 450 x 270 mm, Tx WxH more
6
MOBILE SCREENING PLANT / Star Screen plant Backers Re-Liner 5700-2 Year of construction: 1996 Operating hours: 6.600 - ready for operation - Abzugsband für den Aufgabebunker ist neu - Stars also new Immediate available location: Schwerin / East Germany offer and all price are net and ex stock without guarantee, mistakes and/or false representations reserve, Is9h3yhv purchasing like see / how is it – standing or recumbent, subject prior sale _____... more
1

cnc milling machine PHOENIX FM 250 ATC

MögglingenGermany dealership location
6710 km
1999
good (used)
control CNC IM 20 travel X/Y/Z 1280/500/540 mm Izg7np9t spindle speed 5000 1/min tool magazine for 16 tools BT40 4th axis more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. D2zi3b9 HIAB (CARGOTEC GLOBAL) 140S Log Loader with the following major components and features: -- Stationary Mount with Electric Power. -- Operator's Cab equipped with AC & Heat. -- Squirt Boom. -- Hydraulic Lift on Cab for high viewing. -- 360-degree rotation capability. -- Bypass bucket. -- 75 HP 3-Phase Electric Motor, Skid mounted Pump & Hydraulic Tank. -- Good for sawmill application, or as yard loader on a truck frame, or boom for a forwarder... more
6
max. wheel diameter 215,9 mm gear width 40,65 mm max. module x-axis -102 - 152 mm y-axis -102 - 178 mm z-axis 51 - 304 mm feed speeds x/y/z axis 125 mm/min feed speeds a-axis - workpiece spindle 0 - 30 U/min feed speeds b-axis - swivel plate 0 - 30 ° / s feed speeds c-axis - grinding spindle 1.000 - 6.000 U/min feed speeds d-axis - dressing spindle 1.500 - 8.000 U/min grinding wheel diameter 50,8 - 190,5 mm weight of the machine ca. 10,14 t dimensions of the machine ca. 2.432 x 1.613 x 2.210 m... more
6

Gear Grinding Machine HOEFLER H 630 / 800

ab Lager Monheim am RheinGermany dealership location
6405 km
1983
used
max. wheel diameter 630 (800) mm Zbc78jfis gear width 225 mm max. module 14 min. module 1,5 root circle dia. 30 mm no. of teeth 12 - 240 max. angle of teeth 45 Grad table diameter 650 mm centre distance 200 - 670 mm ram stroke range 20 - 195 mm stroke position adjustment 115 mm grinding wheel size 270/250 x 127 mm grinding wheel diameter 350 / 270 mm roll feed 90 - 900 mm/min double strokes/min. 20 - 360 Stück peripheral speed 35 / 27 m/sec max. stroke of grinding wheel 20 - 240 mm workpiece... more
6
Book Back Rounding Machine Zecchini (La Fornigrafica) Saturno Year 1985 Working width max. 500mm Thickness of books 0 - 100mm Md8ld Output 400 - 600 Blocks/Stunde -Available Immediately - -can be inspect- -on stock - can be test- more
6

MFD Hoesch DRH 130 II-k-s

BabberichNetherlands dealership location
6320 km
used
Bbj0nimw0e more
15
  We offer: used formwork module plant The plants come out of the assets of an insolvent finisher of different concrete elements (ceilings, walls, garages and modules). The plant was due to change in production of the client dismantled expertly and stored outdoors. A functional test is not possible. Manufacturer: Fa.Schrade Schönaich / EBAWE Eilenburg Identification: Production line for space cells as formwork assembly line Year: 1994 renovation / overhaul: October 1999 Anschagffungskosten: 1... more
11
-----MACHINE AVAILABLE TO END USER CUSTOMER ONLY----- • AXIS: 3 (X-Z-C) • “C” AXIS: STANDARD • “B” AXIS WHEELHEAD: +/- 8.5 DEGREES IN AUTOMATIC • YEAR: 2003 • CENTRE DISTANCE/HEIGHT in mm: 1000/175 • EXTERNAL WHEELS: 1 • DIAMETER OF WHEELS in mm: 600 • FREQUENCY CONVERTOR FOR EXTERNAL WHEELS: YES • INTERNAL WHEELS: NO • SENSITRON: YES • GRANITAN MACHINE BASE: YES • LP (LENGTH POSITIONING): NO • IPG (IN PROCESS GAUGE): YES • TAPER CORRECTION ON TAILSTOCK: YES ... more
6

Hoefler Mega 1500 / 1600

BabberichNetherlands dealership location
6320 km
2003
used
Bbj0y3kshl more
6

Wheel loader Volvo L 20 F

Belgium - WaregemBelgium dealership location
6190 km
2011
used
Field of application: Construction Make of engine: Volvo D3.6DCAE3 Transport dimensions (LxWxH): 5.1x1.65x2.5 Foesywi more


back hoe l...
every day

New machines via email!

Be informed!

to

to

Change search
BACK HOE LOADER
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,49 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close