Used Universal Sharpening Machine for sale (64,535)

Year of construction: 1990, condition: ready for operation (used), Travel X/Y/Z: 500mm/400mm/400mm, table dimensions X/Y: 800mm/460mm, speed: 2500rpm, spindle mount: SK40/M16, feed: 630mm/min, rapid traverse: 1300mm/min. Dimensions X/Y/Z: approx. 2000mm/2000mm/2000mm, weight: approx. 1500kg, control: Grundig Contour 2, documentation available. On-site inspection is possible. Dedpet Daqnsfx Ac Nsun

Condition: ready for operation (used), A conventional universal milling machine H. Ernault Somua is available. Table dimensions X/Y: 1600mm/370mm, travel X/Y/Z: 1000mm/320mm/440mm, spindle taper: ISO50, speed: 2000rpm, power: 7.3kW. Machine dimensions X/Y/Z: approx. 2700mm/1700mm/1600mm, weight: approx. 2500kg. The NC display and coolant system are defective. The machine shows an offset of 0.4mm on the X-axis. An on-site inspection is possible. Dodoxt Rmfspfx Ac Nsun

Condition: ready for operation (used), Year of construction: 1999, Two identical smoking and cooking systems are available. Suitable for the production and refinement of sausages and meat products, poultry, fish, cheese and baked goods, hot smoking, warm smoking, cold smoking, moist smoking, intensive smoking, quick smoking, reddening, sweating, scalding, steaming, cooking, hot air cooking, semi-preservation, baking, roasting and defrosting. Heating capacity: 24kW, connected load: 31.5kW. With operating manual. An on-site inspection is possible. Djdpfsw S Tyysx Ac Neun

Year of construction: 1981, condition: ready for operation (used), Travel X/Y/Z: 495mm/205mm/355mm, table clamping surface: 1060mm, spindle bore: 46mm, speed: 2240rpm, machine dimensions X/Y/Z: approx. 4300mm/2100mm/1750mm, weight: approx. 1900kg. Only with counter bearing for arbor mandrels, key, and hobbing arbors. The machine shows bearing noise and play on the X-axis. Documentation available. An on-site inspection is possible. Djdpew Edptofx Ac Neun

Year of construction: 2002, condition: ready for operation (used), Axes: 5, travel X/Y/Z: 500mm/400mm/400mm, speed: 9000rpm, spindle power: 9kW/13kW, tool stations: 16, max. tool length: 290mm, max. tool weight: 6kg, max. table load: 200kg, feed rate: 10m/min, rapid traverse: 12m/min. Machine dimensions X/Y/Z: approx. 4500mm/4000mm/2500mm, weight: approx. 3400kg, control: Heidenhain MillPlus, operating hours: 34724h, spindle hours: 6490h. One operating button of the machine is defective, and the tool is sporadically not ejected. Documentation available. An on-site inspection is possible. This machine was used for training purposes. Duedpox Aupijfx Ac Nsn

Condition: ready for operation (used), Travel X/Y/Z: 800mm/400mm/440mm, table dimensions X/Y: 1285mm/355mm, quill stroke: 130mm, weight: approx. 2100kg. An on-site inspection is possible. Dsdpfxex Hz Rwj Ac Njun

Year of construction: 2006, condition: ready for operation (used), A versatile and robust Arsenal double-spindle universal milling machine with milling head is available. Table dimensions X/Y: 1350mm/320mm, table tilt: +/-45°, travel X/Y/Z: 1000mm/360mm/460mm, automatic travel X/Y/Z: 980mm/340mm/440mm. Horizontal spindle table distance: 30mm-490mm, vertical spindle table distance: 170mm-630mm, spindle mount: ISO50, speed: 2000rpm, feed X/Y/Z: 1000mm/min/415mm/min/415mm/min, rapid traverse X/Y/Z: 2500mm/min/1040mm/min/1040mm/min. Machine dimensions X/Y/Z: approx. 2800mm/3100mm/2000mm, weight: approx. 3500kg. On-site inspection is possible. Dsdpfxev Rp Rzo Ac Nsun

Year of construction: 2008, condition: ready for operation (used), Horizontal spindle diameter: 100mm, Horizontal spindle speed: 3600rpm, Horizontal spindle power: 25kW, Horizontal spindle torque: 920Nm, Vertical milling spindle swivel range: +/-90°, Vertical spindle diameter: 90mm, Vertical spindle speed: 3600rpm, Vertical spindle power: 25kW, Vertical spindle torque: 920Nm. Travel X/Y/Z: 1500mm/500mm/450mm, feed X/Y/Z: 4000mm/min, feed force X/Y/Z: 12kN/12kN/15kN, rapid traverse X/Y/Z: 15m/10m/10m/min. Table dimensions X/Y: 1800mm/500mm, number of T-slots: 5, center slots: 18H7, clamping slots: 18H9, center-to-center distance: 100mm, table load capacity: 2000kg. Horizontal spindle table distance: 450mm, horizontal spindle counter-holder lower edge distance: 345mm, vertical spindle lower edge table distance: 350mm-800mm, column brush vertical spindle center distance: 100mm-600mm. Machine dimensions X/Y/Z: approx. 3400mm/2900mm/2600mm, weight: approx. 5600kg, control system: Heidenhain, operating hours: 61440h. On-site inspection is possible. Djdpfxsulku He Ac Noun

Year of construction: 1999, condition: ready for operation (used), Travel X/Y/Z: 600mm/500mm/450mm, speed: 5000rpm, table dimensions X/Y: 900mm/520mm, quill stroke: 80mm, tool holder: SK40, tool positions: 20, power: 7.5kW, number of axes: 4, machine weight: approx. 4100kg, control: Dialog 12, documentation available. On-site inspection is possible. Dodpfx Aouzlfmsc Nsun

Condition: ready for operation (used), Year of construction: 1998, Spindle speed range: 9000rpm, travel X/Y/Z: 500mm/400mm/400mm, feed rate: 10000mm/min, rapid traverse: 12m/min. Table dimensions X/Y: 700mm/500mm, max. table load: 200kg, number of T-slots: 7, distance between T-slots: 63mm. Control: Heidenhain, tool changer: 16-fold, dimensions X/Y/Z: 4000mm/2200mm/2450mm, weight: approx. 3500kg. Duodpfx Asw Tc Nyec Nsn

Year of construction: 1995, condition: ready for operation (used), Travel X/Y/Z: 560mm/500mm/400mm, speed: 5000rpm, table dimensions X/Y: 900mm/530mm, feed rate: 8m/min, rapid traverse: 10m/min, tool stations: 22, tool holder: SK40. Machine dimensions X/Y/Z: approx. 3950mm/2650mm/2150mm, weight: approx. 3000kg, control: Heidenhain TNC 407/415, operating hours: 29647h. The central lubrication system shows issues. Documentation available. An on-site inspection is possible. Djdpsw H At Hjfx Ac Njun

Condition: ready for operation (used), Year of construction: 2019, A Deckel FP2 universal tool milling machine completely overhauled in 2019 is available. Travel X/Y/Z: 400mm/200mm/400mm, table dimensions X/Y: 700mm/330mm, speed: 2000rpm, tool holder: SK40, machine dimensions X/Y/Z: approx. 1600mm/1400mm/1600mm, weight: approx. 1250kg. On-site inspection is possible. Dusdpfx Acsvf Iy Ds Nsn

Condition: like new (used), Year of construction: 2015, operating hours: 9,925 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 55 m/min, controller manufacturer: Heidenhain, controller model: TNC 640, table width: 900 mm, table length: 1,150 mm, table load: 2,000 kg, overall weight: 22,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 9,925 h, coolant supply: 80 bar, tool length: 500 mm, tool diameter: 160 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: Top-maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced in 03/2025) and only 400 hours of operation since replacement! Year of manufacture: 2015 Control unit: Heidenhain TNC 640 Travel paths: X: 1000 mm Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Table load: 2000 kg Clamping surface: 1150 mm x 900 mm Dsdpfx Acsygx Hno Neun Equipment: - Heidenhain TNC 640 control - AVD active vibration damping - ACC active chatter suppression - AFC adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle interface: HSK-A63 - 60 tool positions - 9-way rotary union - Scraper belt conveyor - A3 Blum tool breakage/tool measurement - 3D touch probe Heidenhain - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic hand wheel - Hardware kinematic option - Manual cabin door - Automatic cabin roof - Chip rinsing gun ...and much more. The machine is available immediately! The machine is in excellent condition with no defects! All services performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and test protocol available!

Condition: used, Year of construction: 1989, x-travel 300 mm y-travel 300 mm z-travel 400 mm CNC-control DIALOG 11 spindle taper ISO 40 spindle turning speed range 31 - 5.000 U/min table-size 620 x 390 mm table load 250 kg power capacity 5,5 kW Dujdpfx Acex Ndbqo Non feeds -stepless- 2 - 6.000 mm/min quill stroke 80 mm voltage 380 V total power requirement 11,0 kVA weight of the machine ca. 1,65 t dimensions of the machine ca. 1,85 x 1,90 x 1,80 m electric cabinet 1,35 x 0,70 x 1,70 m - Serial-No.: 2836-0175 - control: DIALOG 11 - electrical hand wheel - horizontal milling spindle - coolant equipment

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 5220511, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 4,000 rpm, workpiece weight (max.): 8,000 kg, TECHNICAL DETAILS Dedpeygxgzofx Ac Njun Travel X-axis: 2,600 mm Travel Y-axis: 1,000 mm Travel Z-axis: 1,000 mm Max. workpiece weight: 8,000 kg Table size: 3,600 x 900 mm Number of T-slots: 6 T-slot width: 22 mm T-slot spacing: 125 mm Spindle taper: ISO 50 DIN 69871 Spindle speed: 4,000 rpm (2 ranges: 0 - 1,000 rpm) Feed rate: 10 - 5,000 mm/min Rapid traverse: 10,000 / 10,000 / 10,000 mm/min MACHINE DETAILS Control: HEIDENHAIN TNC 426 Dimensions & Weight Space requirement: approx. 9.82 x 5.1 x 3.16 m Machine weight: approx. 21.5 t Motor Spindle drive motor: 29 kW Feed drive motor (Y-axis): 20 Nm Feed drive motor (X and Z-axis): 27 Nm Hydraulic motor: 2.2 kW Coolant pump motor: 0.50 kW Lubrication pump motor: 0.09 kW EQUIPMENT Tool changer Both head joints have 2.5°

Condition: good (used), Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,250 mm, Travel paths X=2000 mm, Y=1500 mm, Z=1250 mm • Siemens 840 DsL CNC control • NC rotary table for 4-side machining 1250 mm x 1250 mm • Horizontal spindle HSK100 • Spindle 2500 rpm HSK 100, 2200 Nm spindle torque • Approximately 9500 spindle hours • Tool changer system HSK 100 / 40 positions • Chip conveyor • Coolant supply • Internal/external air blow-off device • High-pressure coolant 60 bar for deep hole drilling • Full enclosure • Large interference circle 2300 mm Dusdpfxeygw D So Ac Non • Double pallet changer • Short delivery time, subject to prior sale • Year of manufacture: 2010

Condition: used, Year of construction: 1997, machine/vehicle number: 11968, travel distance X-axis: 630 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, overall weight: 6,000 kg, Used HERMLE universal milling machine model U 630 S, year of manufacture 1997, equipped with Heidenhain TNC 410 control and full safety enclosure. Travels: X = 630 mm, Y = 500 mm, Z = 500 mm Table size: 900 x 528 mm, 7x T-slots 14 mm, spindle taper SK40 DIN 69871 Speeds: Gear stage 1 = 20–1,428.6 rpm, gear stage 2 = 1,428.6–7,000 rpm. Separate coolant tank 120 litres, Heidenhain electronic handwheel HS410, Heidenhain measuring probe TS 220 Includes mobile tool trolley for SK40 tool holders with approx. 80 tool holders included. Dedpfjygwz Rex Ac Neun The machine is located at our premises in 71334 Waiblingen-Beinstein and can be inspected by appointment.

Condition: good (used), Year of construction: 1985, Taxed according to the differential taxation scheme under §25a of the German Value Added Tax Act. You will receive a proper invoice. Internal item no.: 26006 You are welcome to inspect the machine under power in our heated warehouse area of over 500m². Universal milling machine Deckel FP1 (3-axis active digital) Year of manufacture: 1985 Travel distances: X300 / Y160 / Z340 mm Dodpeygv Upofx Ac Noun Quill stroke: 60mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: infinitely variable 5-500 mm/min The control system works perfectly, but the LEDs are defective! + Hydraulic machine vice Röhm BB110 The machine comes from an educational institution and is in well-maintained condition.

Condition: good (used), Year of construction: 2000, Internal article no.: 26005 Margin taxation in accordance with §25a Value Added Tax Act. You will receive a proper invoice; however, VAT is not shown separately. You are welcome to inspect the machine under power in our heated warehouse with over 500 m² of storage space. Stimin FUS-22-2M Year of manufacture: 2000 Travel distances: X 320 / Y 250 / Z 300 mm Spindle mount: ISO40 Spindle speeds: 45 - 2240 rpm Dusdoygv Shjpfx Ac Nsn Table size: 670 x 320 mm Feeds: 12.5 - 630 mm/min Drive power: 1.5 kW Quill stroke: 60 mm Total power requirement: 2.5 kW Approx. dimensions (LxWxH): 1.10 x 1.20 x 1.90 m Machine weight: approx. 1100 kg The machine comes from a training facility and is in well-maintained condition.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, clamping force: 700 kN, Equipment: documentation/manual, Seologica controll Clamping force: 70 t Screw diameter: 40 mm (highly resistant) Distance between tie bars V: 370 mm Distance between tie bars H: 370 mm Tie bar distance: 370x370 mm HxV plates: 510x510 mm Mould tickness min-max: 200 Stroke: 400mm Shot volume: 188 cm3 Type: Uni Drive: Hydraulic Air valve: 1 Hours: 23000 2 servo pumps Duedpjygtquefx Ac Nen 4 free cooling circuits 6 electric heating zones for mould

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 4501, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,300 mm, rotational speed (min.): 6,000 rpm, Equipment: chip conveyor, rotational speed infinitely variable, Machine configuration: Djdpfxjygtqbo Ac Noun • UniSpeed3500 • Central chip conveyor • Control panel for side and front operation • Platform • Padded seat • Rotoclear side viewing window • 3-color signal lamp • Main drive up to 6,000 rpm • Tool holder SK 50 BigPlus • Orthogonal milling head (C-axis 0.01°, A-axis 0.01°) • Siemens Sinumerik One • HT2 handheld operating device • Rotary table Ø 1,600 mm, 8 t • Side milling table segments • ToolRunner for 90 tools • Coolant system 950 l • Coolant pump 40 bar / 32 l/min • Coolant-to-air switching • Wash gun in working area • m&h wireless probe • 1-channel collision monitoring system • Operating mode 3 • Air purification system 4,000 m³/h

Condition: used, Year of construction: 2001, Manufacturer: DECKEL MAHO (DMG) Model: DMU 70 VL Year of Manufacture: 2001 Control Unit: HEIDENHAIN TNC 430 Machine Type: 5-Axis Universal Machining Center Working Range / Travels: X-axis: 710 mm Y-axis: 520 mm Z-axis: 520 mm B-axis (Swivel range): -10° / +95° (NC-controlled) C-axis (Rotary table): 360° (NC-controlled) Work Table: Table Type: NC Swivel-Rotary Table Clamping Surface: Ø 700 x 500 mm Max. Table Load: 350 kg Milling Spindle: Max. Spindle Speed: 12,000 RPM (Motor Spindle) Drive Power (40% / 100% ED): 15 kW / 10 kW Tool Taper: SK 40 (DIN 69871) Tool Changer: Magazine Positions: 30 slots Max. Tool Diameter: 80 mm / 160 mm (with empty adjacent pockets) Max. Tool Length: 315 mm Dujdpfx Acsyh Nm Sj Njn Max. Tool Weight: 6 kg Feed Rates & Motion: Rapid Traverse (X/Y/Z): 30 m/min Max. Feed Rate: 20,000 mm/min Weight & Footprint: Machine Weight: approx. 5,500 kg Total Power Requirement: 40 kVA Space Requirements: approx. 4.0 m x 3.0 m x 2.8 m Equipment & Features: High-End Control: Heidenhain TNC 430 5-Axis Capability: Full NC swivel/rotary integration.

Condition: used, Year of construction: 1986, x-travel 390/410 mm y-travel 290/310 mm z-travel 380/400 mm total power requirement 4 kW weight of the machine ca. 1,25 t dimensions of the machine ca. 2100x2100x1700 m Dujdpjvylkcofx Ac Njn technical data please see attachment!

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 32 m/min, feed rate X-axis: 32 m/min, feed rate Y-axis: 32 m/min, feed rate Z-axis: 32 m/min, controller manufacturer: Okuma, controller model: OSP P200M-H, rotary table diameter: 500 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Okuma MU500VA CNC Vertical Machining Centre (2007) Equipped with OKUMA OSP P200M-H CNC CONTROL 20" ROTARY PLATEN 4TH AND 5TH AXIS BUILT IN TRUNION 32 POSITION AUTOMATIC TOOL CHANGER COOLANT THRU SPINDLE TOOL LENGTH MEASURING Travels X-axis (saddle left/right) – 1250mm, Y-axis (pallet front/back) – 660mm, Z-axis (spindle up/down) – 540mm, A-axis – +20~-110 deg., C-axis – 360 deg., Table surface to spindle nose – 127~667mm Table Table size – ø500mm, Max work size – ø730xh500, Floor to table top – 1073mm, Max load capacity – 500kg Spindle Spindle speed – 15000rpm, Turning specification – C-axis table 1000rpm , No. of spindle ranges – Infinitely variable, Tapered bore – 7/24 taper No.40, Bearing dia – ø70mm Feed Rapid traverse – X-Y: 40m/min, Z:32m/min, Rapid traverse (A-C) – 18,000 deg/min, Cutting feed rate – X-Y-Z: 32m/min Motors Dedpfxsyf Ncqo Ac Neun Spindle (10min/cont) – 11/7.5kW ATC Tool shank type – MAS BT40 Big plus, Retention knob type – MAS 2, Tool capacity – 32, Max. tool dia (w/ adjacent tool) – ø90mm, Max. tool dia (w/o adjacent tool) – ø125mm, Max. tool length – 400mm, Max. tool mass – 8kg, Tool selection – Memory random ATC Retention knob type – MAS 2, Tool capacity – 32, Max. tool dia (w/ adjacent tool) – ø90mm, Max. tool dia (w/o adjacent tool) – ø125mm, Max. tool length – 400mm, Max. tool mass – 8kg, Tool selection – Memory random

Condition: good (used), Year of construction: 1998, AXA VHC-3-M/K 5-Axis Universal Machining Center Year of manufacture: 1998 Control: SIEMENS 840C Machine number: 85667 Travel distances: Longitudinal X-axis: 1,200 mm Transverse Y-axis: 700 mm Vertical Z-axis: 800 mm B-axis: -90° to +90° C-axis: 360,000° Spindle overhaul worth €15,000 carried out in 08/2025. Equipment: Swivel head -90 degrees to +90 degrees, indexing at 2.5-degree increments NC rotary table, make: SEMPUCO 400 mm Spindle taper: SK 40, speed range: 40 – 6,000 rpm / 17.2 kW 22-position tool changer Internal coolant through the spindle External coolant Paper band filter Chip conveyor Scope of delivery includes: Documentation / machine parameters on data carrier Equipment, technical data, and transport – see PDF. Illustration, content, and details are provided without guarantee and therefore not binding. All other accessories visible in the photos and video are not included in the scope of delivery and are thus not part of this sale. The scope of delivery only comprises those accessories which are expressly listed here, in the order confirmation, and in the invoice. Dsdjyh Av Tjpfx Ac Nsun FCA (Free Carrier, loaded on truck) D-92729 Weiherhammer Packaging only Delivery time: immediately Subject to prior sale / Payment due immediately upon conclusion of sale