Used Unicontrol 10 for sale (30,232)

Condition: used, Year of construction: 2026, New display machine! Stationary piston compressor with refrigerant dryer, condensate drain, oil-water separator and pre-/fine filter. The universal solution with belt drive and high-quality features. Especially suitable for craftsmen. These compressors are used where compressed air quality, durability, and efficiency are essential. Long service life thanks to two-stage high-performance units with low speed, specially machined cast cylinders for minimal oil consumption and extended lifespan, high-performance valves, optimum cooling via large fan wheel, motor with overload protection, easy condensate drainage using the standard-mounted 1/2" ball valve, standard equipped with Condor pressure switch and manometer, mounted as standard on a safety pallet with anti-vibration mounts. Technical data: Suction capacity 650 l/min, output capacity 520 l/min, max. pressure 10 bar, tank volume 270 l, cylinders/stages 2/2, speed 920 min-1, motor power 4 kW / 400 V, weight approx. 197 kg Dkedpfxj Agcimj Aiijw Location: Rieth

Year of construction: 2023, condition: used, Used Machine Year of Manufacture: 2023 Features and Technical Specifications: - Stationary, oil-lubricated 2-cylinder piston compressor - Two-stage compression - V-belt drive - Intercooler and aftercooler - Condor pressure switch - Motor protection and safety valve - Tank pressure gauge - Check valve and relief valve - Condensate drain valve - Additional connection fittings with blind plugs - Rubber vibration dampers - Manhole opening for tank inspection - Tank compliant with AD-2000 regulations - Suction capacity: 660 l/min Dkodpfx Ajzy Dzieiiow - Effective flow rate: 520 l/min - Maximum operating pressure: 10 bar - Motor power: 4.0 kW / 5.5 PS - Power connection: 400 V / 50 Hz - Start type: Direct start - Speed: 1,025 rpm - Vertical, internally coated 270-liter compressed air tank - Air outlet: 3/4-inch female thread with shut-off valve - Sound pressure level: 78 dB(A) - Dimensions: 750 × 705 × 1,800 mm - Weight: approx. 170 kg

Condition: excellent (used), For sale: a professional pneumatic-hydraulic press by Mäder with a maximum pressing force of 100 kN (approximately 10 tons). The machine is designed for industrial applications, including pressing, assembly, stamping, crimping, straightening, and other workshop and production tasks. The press utilizes compressed air and a pneumatic-hydraulic system. It is equipped with foot pedal control for easy operation during work. Technical specifications: Manufacturer: Mäder Type: pneumatic-hydraulic press Pressing force: 100 kN / approx. 10 tons Operating pressure: 6 bar Total stroke: 50 mm Hydraulic stroke: 5 or 10 mm – depending on the version Frame overhang: approx. 300 mm Maximum working clearance: approx. 200–270 mm, adjustable Work table dimensions: approx. 310 × 220 mm T-slot width: 16 mm Mounting hole in the ram: Ø20 H7 × 34 mm deep Ram diameter: Ø40 mm Weight of the press itself: approx. 311 kg Working medium: filtered compressed air Noise level: below 75 dB Control: foot pedal Dksdpfx Aisz Snrnoijw The machine is sold with the table shown in the pictures.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, 1.0 units of used robot Manufacturer: FANUC Dodpsynuvhsfx Aiiokw Model series: M-10iA/10MS Type: A05B-1221-B902 Year of manufacture: 2018 Maximum reach: 1,441 mm Lifting capacity: 12 kg The robot is designed for use in the food industry. The robot was only used for one year.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, 1 unit, used robot Manufacturer: FANUC Model series: M-10iA/10MS Type: A05B-1221-B902 Year of manufacture: 2019 Dedpfxoynuwxs Aiijkw Maximum reach: 1,441 mm Lifting capacity: 12 kg The robot is designed for use in the food industry. The robot was only in operation for one year.

Condition: used, Year of construction: 1994, spindle diameter: 50 mm, spindle speed (min.): 6,000 rpm, We offer a used WEINIG Univar 10/2 profiling and rabbeting machine, primarily designed for rabbeting windows, doors, and similar profiles. The machine is equipped with two hydraulically controlled, right-hand precision spindles that can be raised and lowered, allowing for the clamping of three sets of tools on top of each other. The lifting mechanism uses a U-shaped motion, enabling the machining of short workpieces. The individual tool positions can be finely adjusted in the radial direction. To ensure high-quality machining without material tear-out, the first spindle allows the selection of either a left-hand or right-hand rotation direction. It is equipped with a mechanical brake for changing the direction of rotation. During the machining of the last 100 mm of each frame end, the spindle plunges into the wood with the corresponding matching tool, thereby reducing material tear-out in the corners of the frame. The construction also includes an additional support rail for large-format frames. Technical equipment and functions: Dsdpfo Aguv Esx Aiijkw * 2 hydraulically controlled, right-hand precision spindles that can be raised and lowered * Ability to clamp 3 sets of tools on top of each other * U-shaped lifting mechanism for machining short workpieces * Fine radial adjustment of individual tool positions * Central lubrication of spindle units * Selection of left-hand and right-hand rotation for the first spindle * Mechanical brake for changing the direction of rotation * Additional support rail for large-format frames * Continuous, chainless feed using rubber-coated rollers with a very short pitch * Height adjustment of the feed beam using a ratchet * Program control with a selector switch for a single program * Automatic change of stroke for two workpieces in the tenon-rabbet section * Ability to program up to 4 workpieces, or 4 sides, for longitudinal profiling and rabbeting The machine does not include machining tools.

Condition: excellent (used), Year of construction: 2011, Cronoplast S.L. BabyPlast 6/10 Vp-T⌀12 / Production line with robot, rotary table and additional automation. Year of manufacture: 2011 Clamping unit: Clamping force: 6.25 t Clamping unit: hydraulic Control: BABYPLAST - touch screen Additional equipment: Production line with robot, rotary table and additional automation Vertical injection molding machine Air valves Injection for mold parting Automatic adjustment of the injection unit setting (up - down) The rotary table is driven by a servo motor controlled by an inverter - very precise Automatic part feeding with quality control system Machine workstation protection with safety package Dimensions: Weight: 350 kg Length/width/height: 0.70x1.00x1.65 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Dkjdoz Iqfbopfx Aiiew Price: Upon request

Condition: good (used), Year of construction: 1982, number of straightening rollers: 13, straightening roller diameter: 145 mm, bale length: 2,330 mm, Year of construction / YOM: 1982/2024 Sheet width: 2000 mm Sheet thickness - max.: 10 mm Sheet thickness - min.: 3 mm Number of straightening rollers: 13 rollers Straightening roller diameter: 145 mm Straightening speed: 16 m/min Bundle length: 2330 mm Center distance between straightening rollers: 150 mm Support roller diameter: 290 mm Main drive motor: 30 kW Weight: 32 t Additional information: Djdpfo Ah Enqox Aiiokw - Number of support rollers: 21/24 - Number of supports (top/bottom): 3 /3 - Traverse lift speed: 0.71 mm/sec - Traverse lift stroke: -18 mm to +42 mm - Max. tilting of lower traverse: 8 mm

Condition: new, Year of construction: 2025, load capacity: 10,000 kg, self-centering complete set, double drive, synchronous with hand-held remote control with digital display and foot remote control Diameter from 300mm to 3500mm Drive rollers diameter 300mm x 120mm Dimensions: length: 1900mm x width 470mm x height 390mm Speed continuously variable 100 - 1200 mm / min. Motor AC 380 V Load capacity 10 t Total power requirement 1.1 kW Dkodpfjv En D Nox Aiiow Self-aligning for several diameters Continuously adjustable speed of the drive unit Polyurethane coating of the rollers heat-resistant Optimal load distribution (4 rollers/unit), particularly gentle for workpieces with low wall thickness and sensitive surfaces Remote control on the cable and double foot pedal CE certificate

Condition: as good as new (ex-display), Year of construction: 2023, Container rotating device, 10-ton lifting capacity Speed: continuously adjustable Hand and foot remote control Diameter: 320mm to 2800mm Roller diameter: 300mm Speed: 6 - 60 m/h Dksded Nmx Topfx Aiiow Power: 2 x 0.55 kW

Condition: new, Year of construction: 2026, functionality: fully functional, load capacity: 10 kg, arm reach: 1,249 mm, controller manufacturer: FANUC, controller model: R-30𝑖B Plus (Mini Plus Cabinet), teach pendant manufacturer: FANUC, teach pendant model: Tablet Teach Pendant, type of input current: AC, repeat accuracy: 0.04 mm, warranty duration: 24 months, Equipment: documentation/manual, Automated Cobot Metrology Cell with Creaform HandySCAN BLACK|Elite & PolyWorks Teximp Cobot Metrology Cell is a flexible, accurate and compact solution for quick, reliable and repeatable 3D scanning of your products. The CMC-10 is based on Fanuc CRX-10𝑖A collaborative robot. We are offering a complete, high-performance collaborative robotic measuring cell designed for automated 3D metrology and dimensional quality control. The system is fully equipped and ready for integration into your production line. The system consists of: 1) Creaform HandySCAN BLACK|Elite Scanning System Dede Agkn Sjpfx Aiiokw • Scanning Device: HandySCAN BLACK|Elite handheld/robotic 3D scanner • Software: Creaform.OS software suite included • Calibration: Dedicated calibration plate • Positioning Targets: 2,000 reflective positioning markers included • Power Supply: Standard power supply unit • Connectivity: Custom 4-meter USB cable for extended reach • Storage & Transport: Heavy-duty hard transport case for the scanner 2) Technical Specifications (Creaform HandySCAN BLACK|Elite) • Certification: Acceptance testing based on VDI/VDE 2634 Part 3 standards • Volumetric Accuracy: 0.020 mm + 0.040 mm/m • Accuracy: Up to 0.025 mm • Measurement Rate: 1,300,000 measurements/s • Light Source: 22 blue laser crosses (+1 extra line for deep pockets) • Stand-off Distance: 200 mm – 450 mm 3) PolyWorks | Inspector Standard Software Package • License Type: Node-Locked license (tied to a single workstation) • Platform: Universal 3D metrology software platform for dimensional control • Meshing: Real-time quality meshing for high-quality polygonal models • Compatibility: Includes all plug-ins for manually operated point cloud digitizing and probing devices • Support: 1 year of PolyWorks comprehensive technical support and software maintenance (IMSupport) included 4) System Infrastructure & Hardware • Automation Interface: R-Series I/O Module for seamless robot-to-scanner communication • Workstation: High-performance metrology PC • Display: 27’’ Professional monitor • Accessories: Ergonomic monitor stand and keyboard 5) Training & Services Included • Professional Training: Comprehensive operator training covering both robot operation and specialized metrology equipment usage. System Features & Key Benefits: • Automated 3D scanning of parts or assemblies • Scan-to-CAD comparison and measurement report generation • Repeatable scanning paths and reduced operator dependency • Ideal for quality control, reverse engineering, and prototype validation • Mobile and transportable cell (mounted on a heavy-duty wheeled platform) • Fully programmable and customizable scanning paths • Dual-mode versatility: The scanner can operate both on the robot arm and as a standalone handheld device • Capable of scanning large components and assemblies, with automated paths limited only by the robot's 1249 mm reach • Intuitive Teximp HMI: Cell control and custom scanning path programming are simplified via a user-friendly Teximp HMI interface running directly on the FANUC Tablet Teach Pendant.

Condition: new, Year of construction: 2026, load capacity: 10,000 kg, Column lifting and rotating device, 10 tons lifting capacity, available as a set or individually. Driven on 2 sides. The machine is offered as a set for synchronous operation or individually. Protec rotating device / positioner Syncrolift. Double column, hand-held remote control, wireless and manual. Column adjustment, 2x electrically adjustable (at extra cost). Lifting capacity 10,000 kg, 360°. Minimum working height: 800 mm. Dodpowtq Dtefx Aiiskw Maximum working height: 1700 mm. Speed: 0.5 RPM. Diameter of clamping plate: 900 mm. Rotating movement: 2 x 2.2 kW. Torque: 18950 Nm. The machine is also offered individually as a mono model (more affordable). Optional with a universal joint flange (cardan flange).

Condition: excellent (used), CATALOG NUMBER 8143 Technical data: Circular saw: - max. saw blade diameter 300mm - adjustable blade, front/rear - motor approx. 3.4kW - dust extraction port diameter 70mm Router: - spindle: - spindle diameter 40mm - spindle working height 180mm - locked spindle - motor 11kW Dedpe Ah E Nkofx Aiiokw - 2 types of rotational speeds 4000, 6000 rpm - electric saw brake - pneumatic material clamping on the carriage, 2 pcs from above and 2 pcs from the side - side carriage adjustable up/down, front/rear and at an angle - retractable support from the table - angle ruler - electric carriage feed - dust extraction port diameter 190mm - dimensions length/width/height 2950mm x 1700x 1630mm – weight 920kg ADVANTAGES - Polish production - electric carriage feed - upper control panel - used router, very good condition Net price: 17,900 PLN Net price: 4,163 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: used, Industrial Uninterruptible Power Supply – Complete System Dodpsz Rpn Isfx Aiiskw For sale: Riello UPS Sentryum S3M 10 XTD T2 industrial uninterruptible power supply, including a separate external battery cabinet. High-quality UPS system designed to provide reliable backup power and protection for critical industrial equipment, automation systems, IT infrastructure, and electrical installations. Technical specifications: Manufacturer: Riello UPS Series: Sentryum Model: S3M 10 XTD T2 Rated power: 10 kVA / 10 kW Input voltage: 380–415 V (3-phase) / 220–240 V (single-phase) Output voltage: 220/230/240 V (single-phase) Frequency: 50/60 Hz External battery cabinet included Digital monitoring and control display Made in Italy CE marked Condition: Used industrial equipment in good visual condition. The UPS was photographed while powered on, with the display indicating ONLINE operation, 100% battery charge, and approximately 5% load. Battery capacity and runtime under load have not been independently verified. Included in the sale: Riello Sentryum 10 kVA UPS unit External battery cabinet Equipment as shown in the photographs Available for inspection by appointment. Worldwide inquiries welcome. Please contact us for additional information or photographs.

Condition: good (used), Year of construction: 1987, Press force 1250 t Bending length 15000 mm Upright spacing 10160 mm Control system CNC 10 graphics Throat depth 770 mm Table length 15000 mm Machine weight approx. 230 t Required space approx. 17000 x 5400 x 5900 mm Additional information: - Press force: 1,250 t - Bending length: 15,000 mm Dedpfx Aio Ah Ep Ioiskw - Control: CNC 10 graphics - Number of controlled axes: at least 10 - Upright spacing: 10,160 mm - Throat depth: 770 mm - Table length: 15,000 mm - Dimensions: 17,000 mm x 5,400 mm x 5,900 mm - Weight: approx. 170 t Equipment: - Crowning device - CNC 10 graphic control - Hydraulic upper tool clamping - Multi-operator functionality - Increased speeds - Automatic, height-adjustable rear sheet gauge - Draw cushion device - Horn length on each side: 2,200 mm

Year of construction: 2012, condition: used, volume capacity 1,04 m³/min Endpressure 10 bar Dedpfxs Agclpj Aiiokw Motor speed 3000 U/min Number of working hours ca. 9.200 h total power requirement 7,5 kW

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 600 mm, number of axes: 3, This ZEISS CONTURA 10/16/6 G2 HTG Gold XT was manufactured in 2018. It features impressive travel ranges of 1000 mm in X, 1600 mm in Y, and 600 mm in Z. The machine is equipped with a ZEISS VAST XT Gold Scanning Sensor, allowing for active scanning with long stylus systems. If you are looking to get high-quality measurement capabilities, consider the ZEISS CONTURA 10/16/6 G2 HTG Gold XT CMM machine we have for sale. Contact us for further details. Dksdpfxo Ahpngs Aiiew - Tool / Stylus Rack Capacity: 7 slots (7-fach Tastermagazin / Werkzeugplätze) - Sensor System: ZEISS VAST XT Gold active scanning sensor (probe configurations with styli up to 500 mm) - Options / Packages: HTG (High Temperature Gradient) package for extended operating temperature range (18–26 °C) - Software: ZEISS CALYPSO Software - Voltage: 1/N/PE 100-240V~ - Frequency: 50...60 Hz - Power: 0.8 kVA / max. 800 VA - Machine Weight: approx. 2.8 t (~2,800 kg) - Included Components: Coordinate measuring machine, 7-slot stylus changer rack, ZEISS CALYPSO software, operator PC (Bedienrechner), machine documentation - Accessories: Measuring probes and existing adapters/holders available upon agreement

Condition: used, Year of construction: 2014, machine/vehicle number: 14-427-T10, total height: 1,880 mm, total width: 850 mm, total length: 1,000 mm, Item description Dsdoz Szk Depfx Aiiskw Infeed width: approx. 200 mm Roller width: approx. 600 mm Length of the roller conveyor: approx. 900 mm Overall dimensions: approx. 1000 x 850 x 1880 mm

Condition: used, Year of construction: 2020, max. wheel diameter 1.000 mm gear width 500 mm max. module 2 min. module 50 Control Klaassen Dedpfx Ae Ad Rlgeiijkw table load of rotary table max. 3.000 kp dia. of 3 jaw chuck 365 mm dimensions of the machine ca. 2,85x1,5x2 m

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: Robot: 24-50924 / Controller: 24-50924, overall weight: 534 kg, load capacity: 10 kg, arm reach: 1,550 mm, ABB industrial robot with IRB 2400 M2004 manipulator (IRB 2400/10 Type B Standard) and IRC5 M2004 controller for industrial automation applications. Condition is used and has been tested. Typical applications include handling, assembly, machining, and general automation. Payload capacity is 10 kg with a reach of 1550 mm. Manufactured in 2006, it has 66,804 operating hours and RobotWare Version 5.16.0005.00 software. It is equipped with a main connection cable between the manipulator and controller, a FlexPendant DSQC 679 teach pendant, and the following software options: German language, World Zones, Fixed Position Events, Path Recovery, File and Serial Channel Handling, Logical Cross Connections, and Analog Signal Interrupt. Dedpfx Aiozamkheiekw

Year of construction: 2010, condition: excellent (used), Complete microbrewery for sale: Dksdpfxef Ni Rvs Aiijw Brewhouse 10 HL: High-quality brewing pan (Schulz), double-walled with smooth cooking process, lauter tun and whirlpool, complete piping, hoses. Automatic mashing with electrical pannel, control for hot water heating, malt mill, small appliances. Fermentation cellar: Wort cooler, ice water container, 5 open fermentation tanks 10HL, 5 storage tanks 20 HL, 3 serving tanks 10 HL. Wort pump, hoses, temperature control. Precoat filter, yeast pan. Bottle cellar: Fully automatic inline filler, 8 digits, soft wheel, round bottle cleaner Lots of accessories, small parts, hoses, etc. For sale as build in. Cranes and loaders for free.

Condition: excellent (used), CATALOG NUMBER 8142 Technical specifications: Circular saw: - max. saw blade diameter 300mm - blade adjustable front/back - motor approx. 3.4kW - dust extraction nozzle diameter 70mm Milling machine: - spindle: - spindle diameter 40mm - spindle working height 180mm - spindle locking mechanism - motor 11kW - 2 types of rotational speeds 4000, 6000 rpm Dkedpfo Ah Elkex Aiiew - electric saw brake - pneumatic material clamping system, top 1 unit and side 2 units - side table adjustable up/down, front/back and at an angle - table feed adjustable on an inverter - angle ruler - dust extraction nozzle diameter 190mm - dimensions L/W/H 2950mm x 1700mm x 1630mm - weight 920kg ADVANTAGES - Polish production - electric table feed adjustable on an inverter - upper control panel - used mortising machine, very good condition Net price: 18900 PLN Net price: 4395 EUR depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: used, functionality: fully functional, fuel type: diesel, fuel: diesel, gearing type: mechanical, suspension: steel, total length: 5,920 mm, total width: 2,250 mm, total height: 500 mm, IVECO DAILY 35C 10 2.8 TDI, three-sided tipper truck – Engine capacity: 2800 cc – Horsepower: 100 hp – Power: 76 kW – Payload: 900 kg – Internal length: 3480 mm – Width: 2140 mm – Side height: 500 mm – Electric windows – For further information, contact Davide: 3355266031. Dkedpfx Aij Ah T Tcoisw

Condition: good (used), Year of construction: 2004, functionality: fully functional, power: 22 kW (29.91 HP), Item No. 5.4-783 Djdpfx Asz Ehryjiiokw 1 used automatic band saw Kasto KASTO HBA A10x12, year of manufacture 2004 Roller conveyor Chip conveyor Coolant system Technical data: Cutting range (round) 300-1260 mm Cutting range (square) 1060x1060 mm Cutting speed (variable) 12-90 m/min Saw band dimensions 11430x80x1.6 mm Total drive power 20 kW Machine weight (approx.) 15500 kg Technical data, accessories and machine description are non-binding.

Year of construction: 2015, condition: reconditioned (used), Used Machine Year of Manufacture: 2015 Condition: Overhauled by Aircraft factory technicians Features and Technical Specifications - Stationary piston compressor with 2 two-stage, two-cylinder, high-performance gray cast iron units designed for a long service life - Maximum flow rate: 2 x 960 l/min - Filling capacity: approx. 2 x 750 l/min - Maximum pressure: 10 bar - Tank capacity: 500 l - Motor power: 2 x 5.5 kW - Power supply: 400 V - Dimensions L x W x H: 2020 x 570 x 1340 mm - Sound pressure level at 1 m distance per DIN 45635: 83 dB(A) - With base load alternating control Dksdpfx Aisz Ek Dreijw - 1st unit: 428 operating hours - 2nd unit: 418 operating hours