Used Twist Drill for sale (5,015)

Condition: ready for operation (used), Year of construction: 1994, quill travel distance: 170 mm, throat depth: 900 mm, power: 3 kW (4.08 HP), High-speed radial drilling machine Manufacturer: HKS, Type: HKS 34 MG Year of manufacture: 1994 Technical data Manufacturer: HKS Type: 34MG Year of manufacture: 1994 Drill spindle mount: MK 4 Dodjzbr Ibjpfx Agvoch Overhang: max. 900 mm Drilling capacity: 32/38 mm, see data sheet Drill spindle stroke: 170 mm Distance spindle – table: 300 / 750 mm Motor power: 3 kW Clamping area with T-slots: 1050 x 420 mm External dimensions W x D x H: 1400 x 2000 x 2450/2900 Weight approx.: approx. 2000 kg Equipment - Thread cutting device - Hydraulic column and arm clamping - Coolant system - Swivel table 510 x 310 mm All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: used, machine/vehicle number: 008601, Max. panel width: 3200 mm Max. panel length: 1000 mm No of Bottom Units: 6 No of Top Units: 4 Positioning of Units by NC: yes Lateral horizontal groups: yes Dcedpfxjzbrnho Agvjh

Condition: used, Diamond core drilling machine, drill, REMS Picus S1 Basic-Pack electric diamond core drill + REMS Simplex 2 drill stand, Used machine Manufacturer: Rems Type: Picus S1 Overall dimensions: Width: 670 mm Depth: 260 mm Height: 160 mm REMS Picus S1 Basic-Pack Motor: 1850 W universal motor Speed (under load): ~ 580 rpm Max. drilling diameter in reinforced concrete: Ø 102 mm (up to Ø 132 mm under certain conditions) Max. drilling diameter in brick / masonry: Ø 162 mm Drilling depth: up to 420 mm Weight: approx. 5.2 kg Connections & accessories: Drill bit connection: UNC 1¼ external thread, G ½ internal (water connection) Water supply unit with shut-off valve, quick coupling, and water stop function Multifunctional electronics: soft start, overload protection, idle speed limiter, blockage protection Safety slip clutch REMS Simplex 2 Drill Stand Suitable for core drilling up to Ø 200 mm Drill column: precision, square steel profile Ø 50 mm Adjustable for floor unevenness: 4 screws for correction Dcodpoxpqvrsfx Agveh Slide guide: adjustable on all sides, with preloaded plastic bearings Drive: rack-and-pinion system with ratchet lever operation Clamp and collar for Ø 60 mm gearbox mounting Integrated spirit level, with slide lock for easier adjustment and transport Weight: approx. 12 kg

Condition: ready for operation (used), functionality: fully functional, Radial drill, Csepel RFM 51, used machine The disassembly of the machine is the responsibility of the buyer. Manufacturer: Csepel Dcjdowcqlcopfx Agveh Model: RFM 51 X-axis length: 4000 mm Arm travel: 3100 mm Radius: 2460 mm Distance from base to spindle: 1660 mm Drilling capacity in steel: 100 mm Drilling capacity in cast iron: 120 mm

Condition: used, Year of construction: 2014, complete in standard configuration with: - Fully automatic electronic control with foot pedal for clamping-drilling-unclamping, electric jog operation, - Automatic return of the drilling unit after reaching the preset drilling depth - Automatic extension of drilling depth when end-grain drilling saves the need to adjust drilling depth from flat to end-grain drilling. (+10 mm, e.g. with dowel length 35 mm, drilling depth flat side 14 mm, drilling depth end-grain 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drill feed 0-70 mm) incl. 21 quick-change chucks (Ganner system) for easy bit changes. - Simple swiveling of the drilling unit from 0° to 90°, supported by gas cylinder. - 1 clamping beam, movable in Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal stop system consisting of: - 1 stop fence 1800 mm for shelf drilling (aluminum profile 40x40 mm) with 3 drop-in stops, with quick-change system, easily swappable from right to left for mirror-image shelf drilling in carcass constructions, also suitable for line boring in System 32. - Side stops and position settings, as well as drilling height position via support table using mechanical digital counters. - Side stops can be easily swiveled away, for the quickest changeover from carcass to frame and line boring. - Clamping arms for clamping beam designed for line boring positions up to max. 300 mm. - Ideal three-stage... Weight: approx. 400 kg gross, approx. 350 kg net. Dimensions (L x W x H): 1.35 m x 1.25 m x 1.40 m Equipment: 1 extraction hood, dust tested, ø 120 mm. 1 set for line boring in System 32 complete with: 1 base fence 1050 mm (aluminum profile 40x40 mm), 1 setting gauge for line boring. 1 frame dowel device complete with: 1 center stop, 1 round stop rod 850 mm long, 2 stops. Location: Nattheim. Dcsdpeyyxkhofx Agvoh

Condition: good (used), Standard holders and accessories, attachment holders, SASSEX spiral drill bits, Sassex spiral drill bits, reaming bits, Sassex reamers, Sassex holders, tool holders, drill bit mounts, twist drills Dcedpfxozbiq Te Agvsh -Manufacturer: Sassex, clip-on holders, 4 pieces -Recording: MK5 -Type/Sizes: see photos -Submission/Price: complete -Transport dimensions: 530/320/H60 mm -Weight: 18.4 kg

Condition: used, machine/vehicle number: 008198, X axis working area: 4200 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 18.5 KW Number of controlled axes: 4 axes Maximum edge height: 60 mm Dcjdpfsx A Hbkjx Agveh Total number of drilling spindles: 35 Total number of tool changer positions: 26

Condition: good (used), Year of construction: 2018, Flame-cutting and drilling system Plate processing center Manufacturer: Vernet-Behringer Type: MAG EVO 420 Year of manufacture: 2018 CNC control Power source: Kjellberg HiFocus 360 Plasma cutting for material thickness: 5 to 50 mm Spindle speed: 160 – 4,000 rpm Automatic tool changer Tool holder capacity: 14 Drive power: 16 kW Drilling diameter: 5 - 40 mm V-scoring for marking: 5 to 40 mm Dcodpjvzrczjfx Agvsh Sheet metal dimensions min.: 1,500 x 300 mm (750 x 400 mm with limitations) Minimum dimensions of finished parts: 80 x 80 mm Sheet metal weight max.: 2,600 kg and 650 kg/m Infeed side: Roller conveyor for flat steel or plates: 4,000 x 2,000 mm Zero-point transverse conveyor Number of carriages: 2 clamps NC infeed carriage, positioned on the side 4 clamping jaws (2+2) 3 short-stroke transverse conveyors Working height: 1,000 mm Outfeed side: Outfeed roller conveyor with a lowerable discharge table with a chute leading into a material collection container for unloading small parts. Filter unit including piping High-performance for use with carbide tools. For drilling, tapping, marking, milling, and plasma cutting of flat steel and sheets. Software options for milling and scoring LANTEK license 3626ä Availability: Immediate!

Condition: new, CATALOG NUMBER M0252 PRODUCT FEATURES Main features of the machine: - Single-head drilling machine for drilling at an angle range of 0 - 90° - Head tilt angle adjustable pneumatically - Side stops adjustable with an accuracy of up to 0.1 mm - Securing clamps allow quick panel positioning without adjustment - Spindles adapted for quick couplings - Patented pneumatic material clamps - Work table made of MDF - Fast and precise adjustments - Accurate drilling - Italian-made Standard machine equipment: - 2 aluminum rulers, 1.5 m long (right and left), each with four stops - 5 quick couplings - Wooden crate for safe transport of the machine Dedpfx Agoza Syujvjch ADVANTAGES - Drilling vertically/horizontally/at an angle - Multiple spindles - New machine - CE certificate - Robust - Professional TECHNICAL DATA - Number of spindles: 23 - Distance between the first and last drill bit: 704 mm - Distance between centers of adjacent spindles: 32 mm - Max. size of workpiece: 950 x 3000 mm - Max. workpiece thickness: 60 mm - Max. drilling depth: 65 mm - Number of pneumatic clamps: 2 - Working pressure: 6-7 bar - Air consumption: 10 l/cycle - Motor power: 1.5 kW - Noise level: 76.1 dB - Spindle speed: 2800 rpm - Overall dimensions: 1235/950/1310 mm - Weight: 310 kg Net price: 19,500 PLN Net price: 4,650 EUR Net price calculated at an exchange rate of 4.15 PLN/EUR (price may change if the exchange rate fluctuates significantly)

Condition: used, Bench drill, gear drill ALZMETALL Type AB 40 ST Production drill Manufacturer No. 750 Year of manufacture 1994 Drilling capacity 40 mm Spindle mount MK 4 - short quill Overhang 325 mm Quill stroke 200 mm Table size 740 x 460 mm Height adjustment of drill head 700 mm Distance spindle-table max. 1015 mm Spindle speed 56 - 2500 rpm 12 gear stages Automatic feed 0.15 - 0.2 - 0.3 - 0.36 mm/rev Motor power 4 kW Mains connection 380 Volt, 50 Hz Dodpfx Aoza Hzgegvech - Spindle speed via 12 gear stages - Drilling and threading device with right and left rotation - Electric foot switch for switching the direction of rotation to left for thread cutting interruption - Rapid traverse via hydraulic quill movement - Semi-automatic operating sequence: rapid traverse - working feed - rapid return - Drill head height adjustment via hand crank - Table height adjustment via hand crank (table height from 740 to 1170 mm) - Coolant system - Control cabinet on the back of the machine - Mounted on a steel plate (1300 x 750 x 15 mm) with machine feet - Quick-change drill chuck METABO 3 to 16 mm - Operating manual and electrical diagram Overall height with drill head at the top 2750 mm Space requirement L x W x H 1400 x 850 x 2300 mm Weight 1250 kg Good condition

Condition: good (used), Year of construction: 2003, bench drill, pillar drill, column drill -Manufacturer: Ixion, bench drill type BT13ST -Clamping table: 170 x 170 mm -Travel distance: 210 mm Djdpfx Agok Tuwvevsch -Spindle mount: Drill chuck B16 (1-13 mm) -Protrusion: 180 mm -Speeds: 420 - 2100 rpm continuously variable -Column: Diameter 65 mm -Spindle stroke: 70 mm, with fine stop -Motor: AEG 0.7/1.0 kW -Voltage: 380 V -Dimensions: 620/235/H800 mm -Weight: 70 kg

Condition: good (used), S+S corner and scissor hinge boring machine with top-mounted unit for drilling lock fittings with HECHT-Positiomat. - Corner and scissor hinge boring unit drills from below - HECHT-Positiomat for controlling the lock fitting unit Dcsdpfsy D Ediox Agvjh (We have not used this) Reliable, well-maintained machine from the reputable manufacturer Schafberger + Sprödhuber

Condition: used, 4-spindle vertical drilling machine for curved pieces such as chair backs or similar Dsdpfozb A Rgox Agvsch

Condition: good (used), Storage location: 3120 Manufacturer: Alzmetall Machine number: Type / Model: AB4 (?) Spindle stroke: 180 mm Spindle mount: MK4 Drilling capacity: 40 mm Speed range: 30 to 765 rpm Feed rate: 0.1 / 0.2 / 0.3 mm/rev Overhang: 345 mm Table diameter: 560 mm Clamping area diameter: 455 mm Dcjdpezb Awtefx Agveh Table height adjustment: mm Column diameter: 180 mm Footprint: 650 x 1,000 mm Total power consumption: kW Accessories/Equipment: Condition: good Weight: approx. 1 t Machine dimensions: 650 x 1,200 x 1,850 mm

Condition: used, machine/vehicle number: 007665, Position 1: Automatic Drilling Machine WEEKE-BST 503 + BST 507 Dsdpfxjwuz Dgs Agvech Position 2: Automatic Drilling Machine WEEKE-BST 503 + BST 507

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Equipment and technical specifications: Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, 0.65 kW motor, stroke 70 mm Dedpfx Ajy Ih Skjgvsch Tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 pc. blow-out, glue application, and dowel insertion station for dowels Ø 8 mm, dowel length 25-50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC-controlled, with working length 1,300 mm, feed speed max. 105 m/min - Z-axis adjustable manually via mechanical digital counter, position via support table 5-40 mm - Dowel insertion projection adjustable 7-20 mm via mechanical digital counter, drilling depth 0-35 mm (with drill length GL 70 mm) is automatically set in conjunction with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for adhesives with viscosity 150 to 350 mPas - Glue quantity infinitely adjustable via operator software - Selector switch GLUE/WATER for flushing the glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Control lamp for glue level indication in the glue container - 1 pc. left side fence, 1 pc. right side fence, and 1 pc. center fence (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm 1 pc. TCT control with: Integrated industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, 15" capacitive TFT industrial touchscreen display, operating system: WINDOWS 7 - Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 4 work areas can be assigned with different programs, graphical workpiece representation, parametric programming, zero-point offset, programmable work lists, error diagnosis with plain text Options: 1 Electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle 1 Z-axis with NC-controlled dynamic positioning for height adjustment of the drilling and dowel insertion station (programmable from 5-40 mm) travel speed max. 30 mm/sec 1 Single-spindle vertical drilling unit from above, 0.65 kW, (3,000/5,000/8,000 rpm), position (Y) manually adjustable via mechanical digital counter from 5-40 mm, drilling depth (Z) max. 30 mm (with drill length GL 57 mm), workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g., for Häfele Minifix) 4 Vertical-angled clamping cylinders 10° with holders, additional 1 Keyboard with holder Availability: by arrangement; currently being overhauled at Ganner factory Location: Austria

Condition: used, Year of construction: 2015, total height: 1,850 mm, total length: 2,300 mm, total width: 1,950 mm, Colour: White Empty weight: 1.240 kg - Year: 2015 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AB/222595 - Main motor power [kW]: 2.2 - Number of controlled axes [pcs]: 12 - Working range X [mm]: 3050 - Working range Y [mm]: 800 - Working range Z [mm]: 60 - X-axis max stroke [mm]: 1040 - Y-axis max stroke [mm]: 1030 - Z-axis max stroke [mm]: 100 - Number of milling spindles [pcs]: 8 - Spindle diameter [mm]: 10 - Min. spindle speed [rpm]: 1000 - Max. spindle speed [rpm]: 4000 - Horizontal drilling unit: Yes - Horizontal drilling spindles [pcs]: 6 - Max. drilling depth [mm]: 18 - Vertical drilling unit: Yes - Vertical drilling spindles [pcs]: 8 - Max. drilling depth [mm]: 30 - Saw unit present: Yes - Voltage [V]: 400 - Current consumption [A]: 10 Dcodpozavvgsfx Agveh - Transport dimensions: 2300mm x 1950mm x 1850mm (l x w x h) - Transport weight [kg]: 1240kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: used, total width: 600 mm, total length: 700 mm, total height: 700 mm, - Documentation available: No - CE certificate present: No Dcedpfxjw N Nq Ae Agvsh - Main motor power [kW]: 0.75 - Drills included: Yes - Tool wrenches included: Yes - Voltage [V]: 400 - Power [kW]: 0.8 - Transport dimensions: 700mm x 600mm x 700mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: 59978, functionality: fully functional, BIESSE SKIPPER 100 CNC Drilling and Machining Center For sale: BIESSE SKIPPER 100 high-performance CNC through-feed machining center designed for drilling, routing and grooving operations in furniture production and panel processing. The machine offers excellent productivity, high machining accuracy and compact industrial construction. Technical Specifications Manufacturer: BIESSE Model: SKIPPER 100 Axes X-axis travel: 3,000 mm Y-axis travel: 1,000 mm Z-axis travel: 60 mm Workpiece Dimensions Length: 90 – 3,000 mm Width: 70 – 1,000 mm Thickness: 8 – 60 mm Spindle Unit HSK electrospindle Spindle speed: 6,000 – 18,000 rpm Spindle power: 3.5 kW Total installed power: approx. 20 kW Drilling Units Per operating unit: 29 vertical drilling spindles 8 horizontal drilling spindles along X-axis Dcedpfezatrrex Agvsh 2 horizontal drilling spindles along Y-axis Total: 78 independent spindles Upper and lower machining units Equipment Automatic panel size detection Electronic thickness control Central automatic lubrication BiesseWorks software Roller loading table Unloading conveyor Dust extraction connections Safety enclosure Machine Dimensions Overall length: 7,290 mm Overall width: 4,400 mm Height: approx. 2,000 mm Weight: approx. 2,700 kg The machine is in good working condition and can be inspected under power by appointment. Photos, videos and additional technical information available upon request.

Condition: good (used), functionality: fully functional, BENCH DRILLING MACHINE TYPE: TB 16 YEAR OF MANUFACTURE: 1977 Technical Data: - Maximum drilling capacity: 16 mm - Drill spindle: MK2 - Drilling depth (stroke): 100 mm Dcedpfxsy Dp I Es Agvoh - Drill table: 220 x 360 mm - Drive power: 0.75 kW / 1 HP - Motor speed: 1400 rpm - Spindle speeds: 430-680-1120-1800-2800-4500 rpm Equipment: - ALBRECHT quick-action drill chuck 0-13 mm - Documentation

Condition: new, Year of construction: 2026, drilling capacity: 40 mm, throat depth: 1,220 mm, spindle speed (min.): 110 rpm, spindle speed (max.): 2,900 rpm, overall weight: 1,710 kg, spindle stroke: 200 mm, spindle mount: MK 4, Drilling capacity in St 60 40 mm Drilling capacity in GG 20 40 mm Thread cutting (St 60 / GG 20) M 27 / M 36 Tool holder short spindle MK 4 Projection center spindle / column min. - max. approx. 210 - 1220 mm Clamping surface machine table approx. 1200 x 510 mm T-slots in the machine table: Number x width 3 x 18 mm Distance drill spindle - table min. - max. approx. 375 - 675 mm Distance drill spindle - base plate (= option) min. - max. approx. 1075 - 1375 mm Spindle stroke approx. 200 mm Feed rates approx. (4) 0.08 - 0.1 - 0.2 - 0.3 mm / U Speed range of the main spindle: infinitely variable 110 - 2900 rpm Dimensions (height x width x depth) approx. 2500 x 1200 x 1710 mm Net weight approx. 1710 kg Dcsdpfx Agjtzkmbevoh Drive power spindle motor 400 V, 50 Hz approx. 2.2 / 4.0 kW

Condition: reconditioned (used), functionality: fully functional, Drilling Machine Brand: GSP Model: 407C22 Reach: 2250 mm Drilling capacity (steel): - Normal feed: 70 mm diameter - Slow feed: 90 mm diameter Carriage travel on arm: 1900 mm Drilling radius (min. - max.): 630 - 2500 mm Height (min. - max.): 500 - 1750 mm Dcsdpfey D Hr Usx Agvsh Vertical arm travel: 850 mm Spindle stroke: 400 mm Spindle speeds: 25 to 1400 rpm Motor power: 6 kW Spindle taper: MT 5

Condition: excellent (used), functionality: fully functional, Soraluce TR3 2500 radial drilling machine, drilling capacity in steel: 80mm, drilling capacity in cast iron: 100mm, boring capacity: 100mm, spindle diameter: 100mm, Morse taper: 5, quill stroke: 310mm, number of speeds: 12, ranging from 25 rpm to 1440 rpm, with slotted table or indexing head. Weight of the radial drilling machine: 11 tons + table or indexing head. Dcsdpfxjzbzy Ho Agvoh

Condition: new, functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, tool diameter: 37 mm, spindle mount: MK 4, drilling depth: 130 mm, height adjustment type: mechanical, Equipment: CE marking, For sale is an absolutely brand-new and unused pillar drilling machine / stand drilling machine from the Mashstroy brand, model PMC 40. This is a so-called "NOS" (New Old Stock) unit – the machine comes from warehouse stock, has never been used in production, and is in immaculate original condition (partially still in factory preservation). Those who appreciate the robust construction of high-quality Eastern European machines will find here an indestructible machine for all time, which is far superior to modern Far Eastern imports in terms of stability. Technical data & highlights at a glance: • Manufacturer: Mashstroy (ZMM Group / Bulgaria) • Model: PMC 40 • Condition: Factory new, unused, fully functional • Drilling capacity in steel: max. 32 mm • Spindle mount: Morse taper 4 (MT4) • Power connection: 400 V (high voltage) • Special features: Massive cast iron construction, mechanical feeds, integrated cooling system, height-adjustable and swiveling drilling table (without any damage or "drilled holes"). Technical specifications • Condition: New / Unused • Max. drilling diameter in steel (St 40 kg/mm²): 32 mm • Max. drilling diameter in cast iron (GG 20): 37 mm • Max. threading in steel (St 40 kg/mm²): M20 • Max. threading in cast iron (GG 20): M24 • Overall height: 1900 mm • Table dimensions: 490 x 380 mm • Base plate dimensions: 470 x 680 mm • Base plate clamping surface: 360 x 310 mm • Max. spindle stroke: 130 mm • Distance spindle – table: min. 55 mm / max. 800 mm • Max. distance spindle face – base plate: 1180 mm Dcedpjzbymxefx Agvjh • Main motor power (2-stage): 1.5 kW / 0.9 kW • Motor speed: 1415 / 700 min⁻¹ • Number of speed stages: 14 • Feed: Manual and automatic feed • Automatic feed range: 0.09 – 0.11 – 0.22 mm/rev • Cooling system: Integrated coolant pump (0.060 kW / 2800 min⁻¹)

Condition: good (used), DRILLING CAPACITY STEEL E335 (ST 60) [MM]: 14 TAPPING PERFORMANCE STEEL E335 (ST 60) [MM]: M 14 SPINDLE, SHORT: MT 2 DISTANCE SPINDLE TO COLUMN [MM]: 250 TABLE CLAMPING AREA [MM]: 370 x 300 DISTANCE SPINDLE - TABLE MIN./MAX. [MM]: 125 / 455 COLUMN DIAMETER [MM]: 90 Z-TRAVEL OF SPINDLE [MM]: 100 FEED: manual POWER [KW]: 0.6 / 0.95 POWER 2 [RPM]: 0.6 / 0.95 MOTOR 1 [RPM]: 750 / 1500 Dcodpfx Agjy D Ebnovoh MOTOR 2 [RPM]: 750 / 1500 SPINDLE RPM RANGE | OPTION 1 [RPM]: 125 – 2,400 SPINDLE RPM RANGE | OPTION 2 [RPM]: 225 – 4,300