Used Turnings Melting for sale (7,506)

Condition: used, Year of construction: 2003, grinding length 1.000 mm grinding width 700 mm workpiece height 500 mm table-size 1.000 x 500 mm max. table load 1.000 kg magnetic clamping plate 1.000 x 500 mm table travel longitudinal 1.300 mm table travel cross 600 mm table feed 2 - 35 m/min Lhsdpfxex Ny Aks Affor turning speed range - grinding wheel 1.450 U/min grinding wheel size Ø 400 x 60 x 127 mm drive capacity - spindle motor 11,0 kW dressing device Tischabrichter voltage 400 V total power requirement 35 kVA weight of the machine ca. 6,3 t dimensions of the machine ca. 3,80 x 2,00 x 2,35 m band filter unit 1,80 x 0,60 x 2,35 m hydraulic power unit 0,85 x 0,65 x 1,15 m - Serial-No.: 209040 - Control: SIEMENS SIMATIC OP27 - Electronic handwheel - Dressing device on machine table - Paper band filter system

Condition: excellent (used), For sale: the Austrian-made Voest DA160 lathe shown in the photos. The machine is in very good condition, as indicated by the quiet spindle operation and the absence of play in the mechanisms. The machine was purchased from a training workshop. Overall condition is rated as very good. Loading of the machine is provided. Price is net. Spindle speed: 30–2500 rpm Two-speed motor Motor power: 2/2.4 kW 16 spindle speeds Rohm 160 chuck Internal, external, and split jaws Spindle bore: 36 mm Tailstock quill: MK3 Quill travel: 100 mm Turning diameter: 320 mm Lhsdpfx Aex Nxuljffsr Turning diameter over carriage: 190 mm Turning length: 650 mm Dimensions: 85x150x140 + 15 (pallet) Weight: 700 kg

Condition: excellent (used), Year of construction: 1986, Heavy-duty lathe, lathe, lead screw lathe, lead screw lathe -Manufacturer: Knuth, lead screw and feed screw lathe type PICATOR 215/1250 -Machine bed: hardened Lodpfowv Uvfsx Affshr -Turning length: 1260 mm -Turning diameter over bed: 470 mm -Spindle diameter without bridge bed: 600 mm -Turning diameter over support: 280 mm -Spindle bore: Ø 55 mm -Spindle speeds: 36 - 2000 rpm -Wedge bar chuck: Forkardt Ø 200 mm -Tailstock mount: MK4 -Drive: 3.6 kW -Accessories: 1x bezel, Multifix tool holder, tools as shown in photos -Dimensions: 1020/2210/H1190 mm -Weight: 1200 kg

Condition: used, machine/vehicle number: 008288, Position 1: Panel Feeding and Loading SCM-MAHROS - STEFANI - CELASCHI Position 2: Double Sided Squaring/Edgebanding Machines SCM-MAHROS - STEFANI - CELASCHI Position 3: Panel Turning Device SCM-MAHROS - STEFANI - CELASCHI Position 4: Double Sided Squaring/Edgebanding Machines SCM-MAHROS - STEFANI - CELASCHI Lhodpfex Nv S Uex Affer Position 5: Panel Turning Device SCM-MAHROS - STEFANI - CELASCHI Position 6: Splitters SCM-MAHROS - STEFANI - CELASCHI Position 7: Panel Stacking and Offloading SCM-MAHROS - STEFANI - CELASCHI

Condition: good (used), functionality: fully functional, mileage: 42,432 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: automatic, wheelbase: 3,300 mm, overall weight: 3,400 kg, first registration: 03/2023, next inspection (TÜV): 12/2027, emission class: euro6, energy efficiency: D, color: black, number of seats: 9, number of previous owners: 1, machine/vehicle number: R-WS7697, Equipment: ABS, air conditioning, airbag, car registration, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, second-hand vehicle warranty, sliding door, soot filter, traction control, trailer coupling, winter tires, Special Equipment: TAXI Package Audio navigation system Ford SD (with Ford SYNC 3), tilting window(s) in the cargo/passenger compartment, rear window wiper, configuration with specific central locking system, alloy wheels 6.5x16 (10-spoke), metallic paint, rearview camera with color display, Seat Package 2: driver's seat (4-way adjustable) – double passenger seat, artificial leather, step under sliding door on the left, tinted rear windows (privacy glass), thermal insulation glazing for cargo/passenger compartment, medium tinting grade. Additional Features: Ljdpfxsx Nv E Ij Affohr 2nd battery, overhead storage in driver's cab, passenger airbag, driver's airbag, active cornering lights, traction control (ASR), electrically adjustable and heated exterior mirrors, turn indicator integrated in exterior mirrors, flooring: rubber in cargo/passenger compartment (full coverage), onboard computer, headliner trim in passenger compartment, entry lights, electronic brake-force distribution (EBD), electronic traction control, assistance system: hill start assist, assistance system: emergency brake assist, assistance system: crosswind assist, fixed window in cargo/passenger compartment: 2nd row left, fixed window in cargo/passenger compartment: 2nd row right, fixed window in cargo/passenger compartment: 3rd row left, fixed window in cargo/passenger compartment: 3rd row right, 240 A alternator, SelectShift automatic gearbox (6-speed), B-pillar grab handle, front grab handles, lockable glove compartment, rear wing doors with glazing, interior filter: pollen filter, body/build: standard minibus, body variant: standard roof, black radiator grille, steering column (steering wheel) adjustable in height/length, model update, engine 2.0 L – 96 kW EcoBlue CAT, front and rear parking sensors, radio preparation, 4 speakers, wheelbase 3300 mm, full wheel covers, tire pressure monitoring system, spare wheel with identical tires, low emissions according to Euro 6d emissions standard, gear/selector lever in leather, interval wipers, adjustable, H4 headlights, sliding door right side cargo/passenger compartment, front mud flaps, front and rear mud flaps, side protection moldings, seat covers/upholstery: artificial leather, seats in cargo/passenger compartment: 1st row, double tiltable, seats in cargo/passenger compartment: 2nd row, double tiltable, seats in cargo/passenger compartment: 3rd row, single seat right, double seat left, start/stop system, 12V socket in cargo/passenger compartment, partially painted bumpers, style color package, LED daytime running lights, Trend, plastic paneling in cargo/passenger compartment, 4 lashing eyes, additional electric heater, second key with folding remote control.

Condition: reconditioned (used), Year of construction: 2006, MAZAK QUICK TURN NEXUS 200-II MY Max. machining diameter: 380 mm Max. machining length: 538 mm Max. milling speed: 4,500 rpm Max. spindle speed: 5,000 rpm Ledpfxexlzp Io Affjhr Max. bar diameter: 65 mm Machine is equipped with: - CNC control Mazatrol Matrix - KITAGAWA three-jaw chuck BB-208, diameter 210 mm - Tool Eye - C-axis - Y-axis - Interface for bar feeder - Automatic parts catcher - NC tailstock - Reinforced coolant pump - MAYFRAN chip conveyor - 8 fixed tool holders - 2 driven tool holders

Condition: like new (used), Year of construction: 2017, functionality: fully functional, turning length: 8,000 mm, turning diameter: 1,600 mm, spindle motor power: 10,000 W, workpiece weight (max.): 35,000 kg, power: 10 kW (13.60 HP), Equipment: documentation/manual, KARATS CNC ROLL LATHE WITH FANUC-31i control. Swing1600mm cneter length 8000mm. Weight workpiece between centers 35,000kg Spindle drive motor AC100kw Lodpfxera Axys Affohr Bed width:2200mm. Bed langth:12085mm.

Condition: used, Year of construction: 1990, controller manufacturer: MAZATROL, controller model: T32-2, number of spindles: 1, CONTROLS .. CNC controls MAZATROL T32-2 BASIC FUNCTIONS .. number of spindles: 1 .. number of turrets: 1 .. live positions: no Ljdpfx Afsx Nvncefjhr WORKING RANGE TURNING .. swing diameter (max): 440 mm .. turning diameter (max): 225 mm .. bar diameter (max): 51 mm .. worpiece length max.: 440 mm MAIN SPINDLE .. spindle revolutions (min): 45 /min .. spindle revolutions (max): 4500 /min .. spindle diameter: 61 mm X/Z SLIDE .. rapid traverse Z: 30000 mm/min .. rapid traverse X: 30000 mm/min .. tool fixture: Turret .. number of tool positions (total): 12 X SLIDE .. X-axis travel: 220 mm ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 2500 mm .. space requirements -front/back-: 2600 mm .. total height: 1800 mm .. total weight approx.: 4300 kg ATTACHMENTS (TURNING) .. tailstock: yes .. chip conveyor: no .. coolant unit: yes

Condition: used, Year of construction: 2010, lifting height: 1,720 mm, fuel type: electric, Drivetrain Drive: Wheel Weights Empty weight: 495 kg Functional Lifting capacity: 180 kg Working height: 487 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Transport dimensions (LxWxH): 1,2x0,77x0,55 Production country: IT Additional information Please contact Christian Theißen for more information Manufacturer: Braviisol Model: Leonardo Lui Mini Year of build: 2010 Condition: Used Data: Max. working height: 4,87 m Platform height: 2,87 m Platform dimensions LxW: 1,14 x 0,68 m Max. basket load: 180 kg Max. Basket load on extension: 180 kg Drive type: Battery Platform lenght pushed out: 1,72 m Ledpfx Ajwprgzeffohr Total dimensions LxW: 1,20 x 0,77 m Height transport position with railing: 1,72 m Height transport position without railing: 0,55 m Movable up to working height: 4,87 m Ground clearance: 0,03 m Only indoor using: yes Own weight: 495 kg Special features: White tires extremely maneuverable, turns on the spot. Anchor points for restraint points (PSA) available Location: 41468 Neuss immediately available

Condition: used, machine/vehicle number: WMA21XZZ4KM81xxxx, mileage: 771,000 km, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 20612 Specifications: Km: Approx. 771,000 Transmission: Automatic Euro 6 Air suspension Turn on 3 Engine brake/Retarder 6x2 Tires (see pictures) Trailer hitch VBG 581 HP Length of plane: Approx. 7.85 m Frame set is included, but is marked by a lot of rust. Bed Radio/CD Air conditioning/AC Rear view camera Videos Service at local workshop and MAN Description: Lodpfexc Dp Eox Affshr MAN Flatbed truck from 2019!Frame set can be included, but there is some rust here.Ready for delivery. Km: 771000 HK: 580 Technical approved: no EU-approved until: 15.05.2025 Own weight: 12320 Total Weight: 28000 Payload: 15605 Width: 254 Length: 1051 Euro: 6 Model: TGX 580 Gearbox: Automatic

Year of construction: 2025, condition: new, Stock No. 2846 Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer Lsdsd Hqa Iopfx Affehr > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : Lsdpfxji Dtbio Affjhr e.g. Type Alphatec AD-.S 75 with: Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant. Trail-run with your material-mix possible, darte and details uopn request.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Ljdpfxji Dtbus Affohr Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Lodpfx Asi Dtb Aeffshr Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Condition: new, Year of construction: 2025, operating hours: 2,846 h, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Screw diameter 73 mm Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Lodpei Dtbqjfx Affohr Visit us at our Wuppertal plant.

Year of construction: 2011, condition: reconditioned (used), No.2401 1 used melt-Filter / screen-pack-changer back-flush / self-cleaning ECON Type: ESK 480-4B y.o.m. : 2011 2 pistons each 2x Ø 123,5 mm 2 pistons : each 2x Ø 176,3 mm complete incl. Hydraulic pack Siemens Panle control The Filter can be inspected in our workshop , date shortly by appointment. You´re welcome More melt-filter / screen-pack-changer ex our machine-stock Wuppertal - Germany available : EREMA RS and Laserfilter Kreyenborg K-SWE / RS Ettlinger ECO Ljdpfxegbfwme Affohr BD Plast Alphatec Gneuss Brit-Ass

Condition: reconditioned (used), No.: 2587 1 used, functionally tested pelletizing-extrusion line, output approx. up to 600 kg/h depending materials, equipped with: 1 volumetric material blender ( Dosing unit ) Extruder Plastmachines Type PME 100 Single-screw Ø 100 mm – 35 L/D Motor 134 kW – DC 1x venting port Ljdpfsh Eydbsx Affohr Melt-Filter BKG Type K-SWE 121 RS – back-flush self-cleaning incl. Hydraulic pack 3 kW Strand die-head with holes 20 x Ø 3,5 mm Strand cooling bath 00 x 4000 mm incl. strand guiding rollers Strand blower Strand pelletizer SG 3000 ResoTec Control cabinet Inspection visit shortly possible, date by appointment. More extrusion lines ex our Workshop / stock Wuppertal - Germany available.

Year of construction: 2015, condition: as good as new (ex-display), machine/vehicle number: 2245, stock-No.:2245 1 used Lab Extrusion-pelletizing Batch line, condition like new, equipped with: Extruder single-screw AlphaTec type AE-S 25-30 single-screw Ø 25 mm – 30 L/D Ljdpfxsd Sg Hre Affshr Extruder motor 3 kW- AC, screw speed range up to 130 rpm frequency controlled cylinder air cooled, elec. heating 2 x 3 kW 1x venting athm. port 1x manual screen-pack-changer Ø 42 mm 1x strand-die-head 1x water bath 1.000 x 150 mm 1x strand-pelletizer, intake width 30 mm, motor 1,1 kW – AC control board with PID, melt pressure, speed by frequency converter Trial-run shortly possible, date by appointment Mire extruders ex our machine-stock Wuppertal Germany available.

Condition: reconditioned (used), No.: 2587k 1 used, functionally tested pelletizing-extrusion line, output approx. up to 600 kg/h depending materials, equipped with: 1 volumetric material blender ( Dosing unit ) Ljdpfxjgbdrqo Affjhr Extruder Plastmachines Type PME 100 Single-screw Ø 100 mm – 35 L/D Motor 134 kW – DC 1x venting port Melt-Filter BKG Type K-SWE 121 RS – back-flush self-cleaning incl. Hydraulic pack 3 kW Strand die-head with holes 20 x Ø 3,5 mm Strand cooling bath 00 x 4000 mm incl. strand guiding rollers Strand blower Strand pelletizer SG 3000 ResoTec Control cabinet Inspection visit shortly possible, date by appointment. More extrusion lines ex our Workshop / stock Wuppertal - Germany available.

Year of construction: 2003, condition: refurbished (used), Stock-No. 2086 twin-screw compounding extruder BERSTORFF type ZE 60 A - UT screw size 2 x 64 mm - 32 LDscrew speed up to 625 r.p.m. adjustable Capacity +/- 800 kg/h depending material specifications Drive from 197 kW up to 350 kW possible, optional by appoinment FLENDER gear-box L/D 34 - 40 LD , by appointment , due to your material formula needs 1x venting port new control board optional - equipment against additional price: screen-pack-changer / melt-filtration unit pelletizing material feeding , loss-in-weight blenders pellet classifier screw configuration and more Lodpfxjh Eyduo Affohr Please inform about your needs to send you a detailled quotation, thank you All ex our stock Wuppertal-Germany available

Year of construction: 1996, condition: reconditioned (used), No.: 2590k Lhodpfsh Eyd Aox Affer 1 used compounding-pelletizing line – output up to 1200 kg/h depending material, equipped with: 1x gravimetric ( loss-in-weight ) blending unit 5-Components SITECOM incl. control board 1x Extruder Twin-screw THEYSOHN Type TSK 90 Screws 2x Ø 90 mm – 36 LD co-rotating intermeshing Segmented screws-and Cylinder, Water / Medium cooled Extruder Motor 255 kW-DC / Screw speed up to 300 r.p.m. 1x Side feeding extruder TSD 75 twin-screw with 3 kW 3x venting ports 1x Melt-Filter Type K –HS- Y 176 mm incl. Hydraulic Pack 1x Melt-Pump with motor 22 kW 1x Strand die-head with holes 32 x Ø3,5 mm 1x Strand cooling bath 620 x 5000 mm 1x Strand pelletizer SG 300 with 11 kW ResoTec Monitor control Board Inspection visit / demonstration shortly possible - date on appointment You´re welcome. More compounding pelletizing lines ex pour workshop available, find our most-recent stock-list online on our homepage.

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Lsdpjiyyndsfx Affjhr Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Lodpfsiyynwex Affshr Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: reconditioned (used), functionality: fully functional, No.: 2587 1 used, functionally tested pelletizing-extrusion line, output approx. up to 600 kg/h depending materials, equipped with: 1 volumetric material blender ( Dosing unit ) Extruder Plastmachines Type PME 100 Single-screw Ø 100 mm – 35 L/D Motor 134 kW – DC 1x venting port Melt-Filter BKG Type K-SWE 121 RS – back-flush self-cleaning incl. Hydraulic pack 3 kW Strand die-head with holes 20 x Ø 3,5 mm Lodpfx Astvfhceffjhr Strand cooling bath 00 x 4000 mm incl. strand guiding rollers Strand blower Strand pelletizer SG 3000 ResoTec Control cabinet Inspection visit shortly possible, date by appointment. More extrusion lines ex our Workshop / stock Wuppertal - Germany available.

Year of construction: 1996, condition: reconditioned (used), No.: 2590k 1 used compounding-pelletizing line – output up to 1200 kg/h depending material, equipped with: Extruder Twin-screw THEYSOHN Type TSK 90 Screws 2x Ø 90 mm – 36 LD co-rotating intermeshing Lhsdpfx Afogbffvofsr Segmented screws-and Cylinder, Water / Medium cooled Extruder Motor 255 kW-DC / Screw speed up to 300 r.p.m. 1x Side feeding extruder TSD 75 twin-screw with 3 kW 3x venting ports 1x Melt-Filter No. 1 type K –HS- Y sieve/Mesh 176 mm incl. Hydraulic Pack 1x Melt-Pump with motor 22 kW 1x Melt-Filter No. 2 type K-SWE 180 RS back-flush self-cleaning 1x Strand die-head with holes 32 x Ø3,5 mm 1x Strand cooling bath 620 x 5000 mm 1x Strand pelletizer SG 300 with 11 kW ResoTec Monitor control Board Inspection visit / demonstration shortly possible - date on appointment You´re welcome. More compounding pelletizing lines ex pour workshop available, > find our most-recent stock-list online on our homepage.