Used Tube Polishing Machine for sale (66,014)

Condition: used, Year of construction: 1995, functionality: fully functional, Drum Grinding and Polishing Unit Manufacturer: UHLIG, Type UB 22 Year: 1995 Hsdjyw Rhmopfx Ag Ijfg Technical Data: Make: Werner Uhlig Model: UB 22 Year of manufacture: 1995 Drive: Worm gear with motor Rotational speed: 5.6 – 54 l/min Shaft diameter: 25 mm, max. torque: 34 Nm Motor power: 0.25 kW Dimensions: approx. 1.00 x 0.90 x 1.20 m Weight: approx. kg (not specified) Equipment: - Control with frequency inverter - 2 single-chamber drums, approx. 200 mm wide, diameter 260 mm - Infinitely variable drum speed - Fresh water rubber hose - Waste water drain connection All details are subject to change without notice. A demonstration under power is possible at any time in our exhibition hall.

Year of construction: 1980, condition: used, machine/vehicle number: 80246, max. tube-Ø: 60,3 x 3,2 mm max. bending angle: 180 ° Hsds N Hfpepfx Ag Iofg arbor rest length: 3000 mm electrical connection: 380 V, 8,6 kW space needed: 2400 x 5700 x 1500 mm weight: ca. 2500 kg

Condition: excellent (used), Pipe bending machine Rothenberger system Bending capacity: 2 7 bending dies for pipes 3/8 - 1/2 - 3/4 - 1 - 1 1/4 - 1 1/2 - 1 3/4 - 2 Footprint: Width: 630 mm Length: 680 mm Transport case dimensions: Width: 700 mm Depth: 300 mm Height: 360 mm Weight: 80 kg Hfjdpfeyv A H Eex Ag Iog

Condition: good (used), functionality: fully functional, Year of construction: 1998, bending radius (max.): 600 mm, mandrel length: 1,200 mm, wall thickness: 8 mm, Transfluid DB 40100ST Mandrel bending machine Tube bending machine The above machine is a mandrel bending machine designed exclusively for the production of tubes and profiles with an outer diameter of 40-100 mm, max. 110x5 mm with a max. wall thickness of 8 mm or for the processing of solid materials with an outer diameter of up to 70 mm. Pipe push-on length/usable length: 1200 mm Radius range max:600 mm Bending height:1200 mm Machine data Hodpfjr H Havex Ag Iofg Length:4000 mm Width:2600 mm Height:1400 mm Weight:9000 kg

Condition: new, Year of construction: 2026, UNIBOHRFIX 100 E Fully automatic drilling machine, measuring length 6000mm (2-axis NC drilling machine) Item No. 6019 Hfjdpsfu Irzofx Ag Ijg With the fully automatic drilling machine UniBohrFix 100, your material is positioned on the X-axis at the desired position, clamped and drilled. All you have to do is press the start button. Round tubes, rectangular tubes and angle profiles, as well as flat and solid materials, can be conveniently pneumatically clamped in the horizontal gripper of the positioning system. After simply entering the X and Y values ​​or calling up a program that has already been written, the machine works completely independently. Advantages • A sequence of holes is automatically executed at precise intervals. • Potential operator errors are drastically reduced. • Programming takes just a few minutes. • Very good value for money. • Significant reduction in labor force Fully automatic execution Measuring length: 6,000 mm Total length: 13,500mm NC 2-axis control incl. LAN interface for data transmission Pneumatic vice (span 200 mm) Alternatively also available with 300 mm. Minimum quantity spray unit with holder and spray nozzle Drill: Unimax 3T AV Alternatively also with Unimax 4 Basic (For technical data see data sheet) anti-rotation device tapping device motorized height adjustment NC positioning system PD 200p Feed force 200 kg Positioning according to absolute and incremental dimensions possible Carriage with DC servo motor and encoder Trolley with 12 ball bearings Pneumatic stop clamping with high holding power Steel guide rail with precision toothed rack Steel carrier profile as dirt protection Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / load capacity 200 kg/m / rollers adjustable in height / Mounting bracket / roll width 407 mm / insert plates / struts Roller diameter 50 mm / steel rollers It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: ready for operation (used), A fully automatic edge polishing machine (bullnose) C.M.G. for grinding marble, granite, natural stone, quartz and ceramic is available. Edges: straight/toroidal/chamfers, chamfer units: 2+2, spindles: 8, calibrating wheel diameter: 200mm, cutting disc diameter: 300mm, tool diameter: 130mm, workpiece thickness range: 20mm-100mm, conveyor speed: 2300mm/min, machine dimensions: approx. 7000mm/1800mm/1900mm, weight: approx. 5100kg. The machine has not been in operation for at least 5 years and must be inspected. An on-site inspection is possible. Hedpfx Aeyypmmsg Iefg

Condition: ready for operation (used), Indumasch Siegen 362 Grinding Pedestal Belt Grinding Machine Grinder -Belt width: 150 mm -Speed: 1400 / 2800 rpm 220V / 380V -Extraction unit You are welcome to arrange an inspection appointment. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided a valid VAT ID number is supplied. Hfjdpfx Ageyyn A He Isg Subject to prior sale. Visit our shop to see our other offers. All company names and trademarks mentioned are the property of their respective owners and are used for identification and product description purposes only. Deviations in technical data or errors in the item description may occur and are reserved.

Condition: new, Year of construction: 2026, SEMI-AUTOMATIC DRILLING RIG “UNIBORFIX 50” With the UniBohrFix 50 drilling system, all profiles can be machined against a stop or with grippers. The Drilling is done manually using the lever, with the materials on the X-axis automatically pointing to the drive to the next drilling position. Easily drill entire programs or work with the stop plate quickly carry out individual drillings. The system is suitable for weights up to 100 kg. The facility also contains a minimum quantity spray unit with holder and spray can. The technical data of the standard version can be found in the table. If necessary, all components of the system can be adapted to your requirements. You can choose between different drilling machines, roller conveyors, select positioning systems and vices. Plantec configures the system so that it suits you perfectly! ADVANTAGES A sequence of holes is automatically executed at precise intervals. Potential operator errors are drastically reduced. Programming takes just a few minutes. Very good value for money. Significant reduction in manpower. Standard measuring lengths: 3,000mm 6,000mm Drill: Unimax 2 T Spindle MK2 Continuous drilling capacity 18 mm Speed ​​ranges: 100-2000rpm, 200-4000rpm Projection 225 mm Spindle/table distance 60-400 mm Adjustable vice with measuring linear display Positioning length stop: PD-100e control for automatic positioning Positioning: absolute or chain dimensions Easy to read LED display Trolley with DC servo motor Positioning accuracy +/- 0.1 mm/m Attachment arm with spring damping Stop plate with groove Memory control with 3,000 memory options Roller conveyors: RD-200/3 load capacity 200 kg/m Roll width 290 mm Roll diameter 40 / 50 mm insert sheets Struts for stabilization switch cabinet Available options: Hfodpogwt Slofx Ag Isg Minimum quantity spray system with spray head and holder Gripper tongs for clamping the material on the stop plate

Condition: used, Year of construction: 2007, pipe diameter (max.): 35 mm, overall weight: 2,700 kg, total length: 2,400 mm, total width: 1,400 mm, total height: 2,000 mm, input voltage: 380 V, Tube forming machine Brand: BLM Model: TUBE-FORM Year: 2007 Hfodpfxox Tt H Re Ag Ijg Serial number: 415050200004 Weight: 2700kg Power: 12KVA Three-phase 380V Dimensions: 2400x1400x2000(h)mm Maximum tube diameter: 35mm Pushing force: 3.5t Clamping force: 5t Max. working stroke: 130mm

Year of construction: 2004, condition: ready for operation (used), Ultrasonic die polishing machine / Wire drawing machine Esteves-DWD 107D16 Year of manufacture: 2004 230 V 20 kHz 4–6 bar Hsdpfoyxxy Hjx Ag Iefg

Condition: reconditioned (used), functionality: fully functional, Löser RP+S374-1, centerless tube grinding machine, cylindrical grinding machine, wet grinding, wet machining Belt grinding station: one Hfsdpfxoyxdgle Ag Iog Grinding belt: 150 x 2500 mm Contact wheel: 150 x 400 mm Belt tension: pneumatic Wheel drive: 5.5 kW Part feed: 0 - 8 m/min Part diameter: 10 - 100 mm Part length: 60 - .....mm Working direction: from right to left

Condition: excellent (used), functionality: fully functional, The machine is equipped with new automation. Hfjdpfxjyw R Dbj Ag Ijg

Condition: like new (used), Year of construction: 2023, operating hours: 58 h, functionality: fully functional, machine/vehicle number: 6523036, working width: 650 mm, sheet thickness aluminum (max.): 150 mm, warranty duration: 12 months, grinding width: 650 mm, GECAM G65RRR Surplus to requirements with only 58 hours working time This machine has been re-configured to have one abrasive belt and two subsequent ScotchBrite barrel brushes ideal for processing smaller sheet metal profiles. 650mm processing width Tampico cleaning brushes on the back end of the conveyor also included. Dust extractor not included but options can be discussed Machine widely used in the automotive sector at manufacturing sites supplying BMW etc 6 months free abrasive belt supply from Finishing Aids and Tools Ltd for this machine (5 belts per position per month) For a full quotation, technical information or any questions you might have about this machine please contact us Hfedpfx Aewnukmeg Isg

Condition: used, Year of construction: 2007, The Romaco Unipac U2080 is a versatile, high-performance tube filling and sealing machine designed for pharmaceutical, cosmetic, and chemical products. Operating at a mechanical speed of 80 tubes per minute, it features 9 stations and handles tube diameters from 10–50 mm and lengths from 60–220 mm, offering flexible, precise filling. Key Features and Technical Specifications: Machine Type: Automatic tube filling and sealing machine. Capacity: Up to 80 tubes per minute (mechanical speed). Hedpfx Ageyvuhno Isfg Working Stations: 9. Tube Dimensions: Diameter: 10 – 50 mm. Length: 60 – 220 mm. Application: Suitable for liquids, creams, and gels for pharmaceutical and cosmetic applications, say Makinate and MLTC-Europe.

Condition: used, Year of construction: 1979, Roundo plate/pipe roller. In recent years, it has primarily been used for rolling smoke pipes with a diameter of 150–160 mm. Four pallets with rollers are included; they are used to determine the pipe diameter. Using a pneumatic cylinder, the end is opened to remove the rolled pipe. I have tested the machine, but the rollers do not run. There is probably a simple solution for this. Machine and rollers weigh approximately 3–4 tons. Hfsdpfsyvqc Ujx Ag Ieg

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, control type: manual, degree of automation: automatic, actuation type: electric, pipe diameter (max.): 60 mm, pipe length (max.): 6,000 mm, tube wall thickness (max.): 5 mm, bending angle (max.): 180 °, input voltage: 400 V, input frequency: 50 Hz, Equipment: emergency stop, It is a machine from 2018 and we used very little. We can bend pipe from 18 mm - 60 mm Machine cost new 2018 was ca 45.000,00 EUR and tools was ca 55.000,00 so total was EUR 100.000,00 Hodpeyvhl Hsfx Ag Iefg

Condition: new, neu ca. 12 - 14 Wochen ab Auf Italien 38900 € 742.99 € 64 mm 4000 mm 950 mm 1250 mm 850 kg 10 cm³ 64 x 3,3 mm 2" mm 60,3 x 2,2 mm 60 x 60 x 2 mm 40 x 60 x 4 mm 60 x 40 x 3 mm 76 mm 200 mm 20 mm 210 ° 4.2 kW 15 l with mandrel 3 m length FST closure system (Patented) with auxiliary system for stabilizing the hydraulic pressure of the slide Programmable C-axis bending Positioning of the 2-axis manual spindle carriage (Y1=Feed and B=Rotation) with high resolution encoder and standard adjustable mechanical stops Multifunction control keyboard integrated in the machine body with microprocessor control with multifunctional menu 30 programs of 9 bends each can be memorized Screen for digital display for carriage feed (Y1 Axis) and rotation (B Axis) External pressure gauges for easy setting of the system and closing pressure Variable bending speed up to 4 rpm (Inverter versions) Pneumatic chuck Hfjdpfx Ajynmtfeg Iog ALTERNATIVELY: model with mandrel length 1,5 / 4 / 6 mm

Condition: new, neu ca. 12 - 14 Wochen ab Auf Italien 32900 € 628.39 € Hodpsynmrnefx Ag Iofg 50 mm 4000 mm 950 mm 1250 mm 430 kg 6 cm³ 50 x 3,31 mm Ø 1”1/4 mm Ø 50 x 2,5 mm 40 x 40 x 4 mm 25 x 50 x 6 mm 50 x 25 x 2,7 mm 60 mm 200 mm 20 mm 210 ° 1,25 / 2,5 3.5 kW 15 l With mandrel 3 m length Can be used with or withoud mandrel Two bending speeds Programmable bend sequencing and mandrel retraction Independent clamp and pressure die adjustment Micrometer wiper die adjustment Auxiliary system for stabilizing the hydraulic slide pressure Quick tool change system With pneumatic material clamping and DRO system for linear and rotational positioning ALTERNATIVELY: model with mandrel 6 m length price on request

Condition: new, Year of construction: 2023, pipe drilling machine, inclined drilling machine, automatic drilling machine TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + TO BE INSPECTED UNDER POWER - minimum quantity lubrication - manual material clamping - manual feed - max. tube length 3.000mm (option 6.000mm) Hsdpfx Ajlgvkieg Iefg - positioning accuracy +/- 0,2mm - 10 stops (can be extended as required) - manual insertion and removal of material - drill head swivels +/- 50 - manual 360 degree tube swiveling device - power drilling unit 1 x 2,2 kW - motor speed 295 - 2950 rpm - display speed on touch panel - illumination drilling unit - integrated tool cabinet - round tube up to 114mm - square up to 100 x 100mm - flat material up to 100 x 15mm - T-profile up to 100 x 100 x 12mm - L-profile up to 100 x 100 x 8mm - Double post up to 100 x 15mm - Flow drilling up to M12 - Drilling up to Ø 50mm

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 913 mm, total length: 634 mm, total height: 1,700 mm, warranty duration: 12 months, compressed air connection: 6 bar, overall weight: 200 kg, power: 1.9 kW (2.58 HP), input voltage: 230 V, Semi-automatic tube filling machine. Efficiency up to 13 tubes per minute. Dose from 5ml to 270ml Tube diameter from 19mm to 50mm Tube height from 70 to 210mm Made in Poland Machine available to view and test at the firm's premises. Hsdpfxjxx Uihs Ag Iefg Jedliński Packaging sp. z o.o. ul. Wodna 3 05-090, Raszyn Poland

Condition: used, Tube bending machine, mandrel bending machine, bending machine for tubes and profiles Tube bending unit with SIEMENS servo motor and planetary gearbox Year of construction: 2003 Bending capacity: max. Ø 20 x 1 mm Bending radius: max. R 70 mm Bending angle: max. 200° - last used for round tube Ø 15.4 x 0.8 mm, R60 mm - Bending tools and bending jaws interchangeable - Bending tool drive via AC servo motor and Alpha spur gear, planetary gearbox - 2-part bending tool opens and closes via hydraulic stroke movement - MERKLE hydraulic round block cylinder, item 014445 for hydraulic tool opening - Pneumatic height adjustment of the bending jaw via Festo compressed air cylinder - without electrical control - without hydraulic unit Dimensions L/W/H 760 x 400 x 150 mm weight: approx. 60 kg good condition Removed from a functional special machine, tested before removal. Drive: Brushless permanent magnet servo motor SIEMENS Typ:1FK6061-7AF71-1EG0 Nominal torque = MO: 6.4 Nm Rated current = Io: 6.1 A Speed = n. max.: 5500 rpm - Brushless permanent magnet servo motor SIEMENS ----- 5 pieces available in right-hand version. 5 pieces available in left-hand version. The price quoted refers to 1 bending unit with servo motor. If required, we also sell individual assemblies of the bending unit. Hsdjd E A I Ispfx Ag Ijfg We also offer the electrical components for controlling the servo motor. We also offer hydraulic units.

Condition: used, Rotary vibratory finishing machine WALTHER TROWAL type CLS-980 SA Com. No. 15.207 Year of construction 1972 Trough diameter 1850 mm Total outer height of trough approx. 1150 mm Working hopper / gross volume max. 980 liters Useful volume approx. 490 liters Largest possible workpiece diameter approx. 300 mm (measured diagonally) Screen area 3400 cm2 Infinitely variable speed 1000 to 1700 rpm Hjdpfjdzqn Djx Ag Iofg Motor power 22 kW Mains connection 400 Volt, 50 Hz - Switch-on time manually and via timer - Infinitely variable motor speed via DANFOSS drive controller type VLT 3032 (frequency converter) - Manually adjustable eccentric unbalance weights - Container with rubber lining - sound-insulated lid with pneumatic lid opening - Manual separating flap - built-in sieve separator after the separating flap - liquid inlet - Material outlet opening 470 x 300 mm - Control cabinet and drive controller for wall mounting - Bulkhead cover with perforated sieve - 1 box of pyramid grinding media Space requirement L x W x H 3000 x 3000 x 2550 mm Transport dimensions L x W x H 2300 x 3000 x 2550 mm dead weight 2500 kg good condition Functional description: Workpieces and grinding wheels are set in motion by the vibrations generated and circulated extremely gently. The constant relative movement between the workpieces and the grinding wheel causes deburring and surface finishing of the workpieces.

Condition: used, Double-sided grinding and polishing stand MEYER type SMP Machine. No. 848 Year of construction 1963 shaft diameter 50 mm grinding wheel support Ø 305 mm wheel distance 1470 mm grinding- polishing wheel diameter max. 800 mm working height 550 mm speed 710 / 800 / 950 rpm. Drive power 2x 3 kW Hodpfx Ajdzqmheg Isfg mains connection 380 Volt, 50 Hz. - two drive motors for each working side separately - star-delta switch for each drive motor separately - speed change by shifting the drive belts - dust exhaust flange Ø 100 mm - mounted are 2 pieces corundum grinding wheels with 40 mm width, Ø ca.560 / 480 mm space requirement L x W x H 1700 x 1200 x 900 mm weight 850 kg good condition

Condition: used, Brush deburring machine, tube deburring machine ERINI type 250 Year of construction approx. 1995 Brush diameter 250 mm Brush width 25 - 60 mm Speed 1500 / 3000 rpm Power 2,2 / 2,8 kW Mains connection 380 Volt, 50 Hz - Material support - New deburring brush Hfjdpfx Agopu R Ngs Ieg - Suction connection Ø 100 mm Space requirement L x W x H 620 x 500 x 1150 mm Weight 100 kg good condition

Condition: repair required (used), functionality: not functional, Year of construction: 2004, CNC Tube Bending Machine Manufacturer: Schwarze-Robitec Hfodpfxjxzubvj Ag Ieg Model: CNC 80 E-MR Year of manufacture: 2004/2006 Condition: Needs repair CNC: PC control Beckhoff Technical Specifications: - Maximum tube diameter x wall thickness: 80 mm x 3 mm - Minimum tube outside diameter: 16 mm - Minimum bending radius (to tube centre): 25 mm - Maximum bending radius (to tube centre): 240 + 50 mm - Maximum bending angle: 180° - Maximum tube lift length: 1000 mm - Bending direction: right - Machine weight: 7000 kg - Total installed power: 39 kW - Voltage: 400 V / 50 Hz - Amperage: 100 A - Machine dimensions (L x W x H): 6.2 x 3.2 x 2 m Equipment / Accessories: - Hydraulic pressure and feed for slide rails - Automatic tube feed and rotation device - Electric mandrel bending device - Pneumatic mandrel rod safety device - PC control Beckhoff - Automatic central block lubrication - Laser scanner, safety guard Machine requires repair: The planetary gearbox of the transport trolley is defective and must be replaced. Spare parts costs according to offer: planetary gearbox €1,674 + gearbox flange €1,850 + pinion €850 + VAT Without installation. Cheap sale in current condition – sale as is. Immediately available, free loading onto truck included.