Used Tube Benders for sale (2,990)

Condition: used, Year of construction: 1951, functionality: fully functional, pressure: 96 bar, operating temperature: 525 °C, Manufacturer & Type: Manufacturer: Vitkovice a.s., Ostrava Boiler Type: Water-tube vacuum steam boiler Classification: Gas-fired Fuel System: Primary Fuels: High-Processing Gas (VPP) Coking Gas (KP) Natural Gas (ZP) Ignition Fuels: Coke oven gas Natural gas Performance Parameters: Nominal Steam Output: 80 t/h Minimum Stable Output: 48 t/h Operating Range: 60-100% of nominal capacity Steam Conditions: Outlet Temperature: 525°C Dcsdpfxjwwtxus Af Isn Outlet Pressure: 9.6 MPa Feedwater Temperature: 150°C Combustion System: Number of Burners: 6 Key Features: Vacuum-type water-tube design Multi-fuel capability Wide operating range (60-100%)

Condition: new, Year of construction: 2023, RSV Pipe Zone Compactor with Rotator NEW MACHINE The compactor is from 2023 and comes from our showroom. Compactor base model: RSV 50 Plate width: 340 mm Height without mounting plate: 1987 mm Built-in Rotator: RX16-1 Equipped with rotary feedthrough for forward and return flow as well as leak oil. Further technical data available in the attached images. HIGHLIGHTS AND DESIGN RSV mounted compactors are engineered for excavators with an operating weight from 2 to 42 t. When working with our RSV mounted compactors, you will easily achieve your compaction targets. Difficult-to-access work areas can be optimally reached and compacted. Thanks to the smooth and balanced operation of the exciter unit, only minimal vibrations are transferred to the excavator. RSV mounted compactors can compact deep regions where other compactors reach their limits. Dsdpfx Afjwwkvko Ijcn PRIMARY APPLICATIONS • Civil engineering • Cable and pipeline construction • Earthworks and structural engineering • Landscaping and gardening • Road and pathway construction The compactor can be equipped with all mechanical and fully hydraulic adapters.

Condition: used, functionality: fully functional, Year of construction: 2001, pipe diameter: 60 mm, power: 1.85 kW (2.52 HP), I-Beam steel, flat 100 x 15 (Ø 500) mm I-Beam steel, upright 50 x 10 (Ø 500) mm Angle steel 50 x 6.0 (Ø 600) mm Round material 35.0 (Ø 500) mm Max. tube diameter 60 x 2.0 (Ø 1200) mm Square material 50 x 50 x 3 (Ø 1000) mm Bending speed 10.0 rpm Top roller diameter 165 mm Bore 40.0 mm Dimensions (L-W-H) 560 x 1430 x 980 mm Adjustment range: upper roller 124 mm Total power requirement 1.85 kW Weight 275 kg Low usage (!!) Manufacturer's list price incl. accessories approx. €12,500 Special price on request Equipment: - electro-hydraulic ring/profile bending machine - heavy and robust machine body Dcedjwvrazjpfx Af Ijn - 2x powered rollers (MR2 series) - segmented roller dies - digital position display for top roller (0.1 mm) - manual upper roller adjustment - forward / reverse operation of bending rollers - Bending speed approx. 20% higher than comparable machines in its class - shafts made of forged & ground chrome-nickel steel - machine base frame - suitable for horizontal and vertical operation - mobile control panel - CE marking

Condition: new, functionality: fully functional, Year of construction: 2025, Tube end processing machine, axial tube processing, tube end forming machine, tube end processing, axial tube forming, tube forming machine, expanding, reducing, expanding machine, reducing machine, beading, flaring Dcjdpowvq Svofx Af Isn

Condition: new, Year of construction: 2024, Bending machine ZB 70/3 H ECO - with foot pedal - with standard roller set TECHNICAL SPECIFICATIONS: - three driven shafts, smooth surface - hydraulic adjusting of the center roller - working position horizontal and vertical - digital readout with memory - shafts are supported by conical bearings - slide bars on the slide-support are exchangeable - shaft diameter: 40 mm - roller diameter: 152/162 mm - shaft rpm: 8,5 U/min - voltage: 400V 50Hz 3Ph - drivingmotor: 1,1 kW - motor for hydraulic: 1,1 kW - hydraulic pressure: 8 to. - adjusting way: 120 mm - weight: 470 kg Dcedpfx Afehmbh Ho Ion - dimensions: 900x650x1070 mm - colour RAL5012 / RAL7015

Condition: used, Mandrel Tube Bending Machine 42 Siegfried Volz Machine Tools Dcedpfx Aewnrt Sof Ion Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1993, functionality: fully functional, pressure: 96 bar, operating temperature: 525 °C, Boiler Type: Stirred tube boiler with granulation chamber Serial Number: 3069 Year of Commissioning: 1993 Manufacturer: SCG Djdewwtvtepfx Af Iecn Performance Characteristics: Nominal Output Capacity: 100 t/h Economic Load: 85 t/h Minimum Stable Load: 60 t/h Efficiency: 89.1% Steam Parameters: Superheated Steam Pressure: 9.6 MPa Superheated Steam Temperature: 525°C Feedwater Temperature: 150°C Auxiliary Systems: Emission Control System: Type: Electrostatic precipitators Separation Efficiency: 99.9% Thermal Output: Rated Thermal Capacity: 77 MW

Condition: good (used), Baltographe, Baltograph Dcedpfsd Sacpsx Af Ijn -Dimensions: 715/270/H410 mm -Weight: 78.5 kg

Condition: used, functionality: fully functional, Year of construction: 1997, 5-axis CNC tube bending machine BLM Dynamo - 0 Serial number: 605970300001 Year of construction: 1997 Voltage: 380V 50HZ Machine weight: 1500 kg Control system: DOC 85C BLM bar loader BLM CARM 7 Serial number: 340040102059 Year of construction: 2004 Weight: 405 kg Without conveyor belt Without protective grid TECHNICAL DETAILS Number of axes: 5 Average output: ~ 2400 bends/h Bending capacity round tube R=45 kg/mm²: 4 - 12.7 x 1.5 mm Bending capacity round tube R=35 kg/mm²: 4 - 14 x 1 mm Bending capacity round tube Al/Cu/Ms: 4 - 18 x 1.25 mm Bar feeder: BLM Carm 7 (year of manufacture: 2004) Dcsdpfxot R Tgis Af Ion Positioning speed X-axis: 2000 mm/s Bending speed H/Z Y-axis: 500 °/s Turning speed Z-axis: 900 °/s Turning speed Z-axis: 100 °/s Positioning speed T-axis: 500 mm/s Measuring tolerance X/T axis: ± 0.1 mm Measuring tolerance Y/Z/Q axis: ± 0.1° Maximum range at maximum acceleration X-Y-Z: 1000 mm - 90/90/0° - 0/180/0° with tube 18 x 1.25 mm MACHINE DETAILS Voltage: 380 V, 50 Hz Hydraulic pressure: max. 120 bar Machine weight: 1500 kg Control system: DOC 85C Ex location Dortmund, free truck loading

Condition: new, functionality: fully functional, Year of construction: 2025, Tube bending machine, CNC bending machine, tube bender, tube bending system, tube processing, tube technology, right-left bending, 3D tube bending, servo-electric, multi-axis bending machine, mandrel bending machine Capacity: -Round tubing mild steel S235 22 x 2,0 mm Ø -Round tubing stainless steel 1.4571 22 x 1,5 mm Ø -Max. moment of resitance 0,5 cm³ (S235) -Bending angle up to 180° + 10° spring back -Speed of bending axis max. 300°/sec. -Speed of front feed axis max. 1800 mm/sec. -Speed of rotation axis max. 600°/sec. -Repetition tolerance bending +/- 0,05° -Repetition tolerance length +/- 0,05 mm -Repetition tolerance rotation +/- 0,05° -Radius max. 66 mm -Bending height 1150 mm -Boosting force length positioning 2,5 kN -Power bending axis servo-electric -Automatic positioning rotation/ length servo-electric -All other axes servo-electric (e.g. clamping, mandrel forwards/ backwards, etc.) Djdpfx Aowvqgtef Ijcn -Positioning of the bending heads servo-electric -Positioning of the pressure die (radial) servo-electric -Pressure die movement (axial) servo-electric -Material clamping (chuck) pneumatic Machine equipment-/basic accessories: -Bending head for bending right-hand and left-hand with one off set bend device -Bending head can be positioned horizontal and vertical, including rotation axis for change of bending direction (right- or left-hand) -Positioning of bending head via combined diagonal and rotation axis, this allows bending right- and left-hand in one operation -Bending direction free programmable, changing right-/left-hand for one tube geometry -Each bending head can be equipped with minimum two tool sets, e.g. with different bending radii or form-clamps, max. changing height for standard machine is 50 mm -Max. difference of bending radii for each bending level 1,5xD -With hollow shaft for using tooling for small radii -Minimum clamping length on the tube end, because of wide opening pressure die which allows the off set bend device to move directly behind the bending tool -Chuck for use of segment collets Depending on the contour of the clamping segments, already formed tube ends can be clamped -Material clamping in the VWE pneumatic -Footswitch to open or close the collet in the offset bend device, for easy loading and unloading -Following pressure die for bends up to 180° (for radii up to max. 2xD, for lager bending radii the pressure die can be repositioned to ensure a constant contact up to 180° bending angle) -For a correct positioning of the mandrel the machine is equipped with a mandrel support -Automatic, programmable mandrel withdrawal -Minimum quantity lubrication for automatic mandrel lubrication, adjustable lubricant quantity, can be used from inner tube Ø 13.5 mm -Central lubrication for automaticall lubrication of all moving parts in the necessary cycle -Air conditioning for the electrical carbinet -Starting of operation via manual switch on the control panel -In manual mode, all functions can be operated by keyboard and mouse The machine is built according to the latest safety regulations -In order to comply with the CE guidelines, a safety barrier is required in addition (DB-SA...) -Colour RAL 7047 grey, RAL 3020 red Control description: -Control via Simatic PC IPC BX-32A, Xeon W-11155MLE

Condition: used, Specifications: - 10' x 5' dia. - 750kg capacity - 700 C temperature - Propane fired - 10 HP rotation motor - Furnace tilting and door opening on hydraulic cylinders - Control panel Dcodpjwtzt Ejfx Af Ion - CSA approved Price: Upon agreement! Usage: working with non-ferrous metals (such as magnesium, aluminium, zinc, lead, etc.) in various applications.

Condition: good (used), functionality: fully functional, Year of construction: 2011, operating hours: 34,797 h, machine/vehicle number: 2011-0250, pipe diameter: 600 mm, pipe length: 1,500 mm, bending angle: 180 °, bending radius: 200 mm, wall thickness: 3 mm, The machine was originally built in 1996. Originally overhauled by the manufacturer in 2011 for approximately €250,000: electrical and mechanical components completely renewed. TECHNICAL DETAILS Pipe diameter: 16 - 60 mm Wall thickness: max. 3.0 mm Bending radius: 20 - 200 mm Pipe length: 1,500 mm Bending angle: max. 180° + springback Pipe length: 400 - 1,500 mm Pipe outer diameter: 28 mm - 60 mm Material parameters Tensile strength of stainless steel: max. 750 N/mm² Tensile strength of mild steel: max. 450 N/mm² Performance limit (steel): Ø 60 x 3 mm Performance limit (stainless steel): Ø 57 x 2 mm Travel movements Bending direction: left Bending speed (forward travel): max. 22.0 rpm (infinitely adjustable) Bending speed (reverse travel): constant 22.0 1/min Twisting angle: max. 360° Twisting speed: 50 rpm Height adjustment for multiple radii: lowest tube center 55 mm Height travel: suitable for 3-groove bending tools MACHINE DETAILS Stop time: 125 ms Machine weight: approx. 8.0 t Machine dimensions (L × W × H): 6,300 × 3,300 × 1,900 mm Control cabinet (L × W × H): 2,700 × 700 × 2,000 mm Control panel (L × W × H): 900 × 600 × 1,850 mm Tube magazine (L × W × H): 1,800 × 2,400 × 1,750 mm Operating hours: approx. 34,797 h Performance data Total power requirement: 55 kW Hydraulic filling volume: 340 l Control system Bending levels: up to 6 (CNC-programmable) Positioning device: NTB version Control unit: Schwarze-Robitec operating and control panel EQUIPMENT - Automatic cold pipe bending machine - Pipe positioning device - Gripper - Schwarze-Robitec pipe magazine - Hydraulic operation for bending table, tool clamping, slide rail, mandrel retraction, reinforced slide rail feed and retraction - Various bending tools for Ø 60 mm pipe - Various auxiliary tools - Cooling unit for control cabinet - Foot control (2-way) - Schwarze-Robitec control panel - Cooling unit for control cabinet Rittal type SK 3361100 Dedpfx Afswlpt Do Iocn Note: Due to a lack of operating knowledge, the machine could only be tested in setup mode. No errors are known.

Condition: used, Year of construction: 1999, functionality: fully functional, pressure: 96 bar, operating temperature: 525 °C, Type: Stirred tube boiler with granulation chamber Serial number/Year of commissioning: 3121/1999 Producer: Vitkovice a.s. Ostrava Boiler greening contractors (year): PROVYKO, s.r.o. (2018) ČKD PRAHA DIZ (2016) Nominal output: 200 t/h Economic performance: 170 t/h Minimum stable load: 120 t/h Superheated steam parameters: Pressure: 9.6 MPa Temperature: 525 °C Feed water temperature: 150 °C Efficiency range: 91.2% to 92.6% Dedusting system: Dcodpfx Aswwtqdjf Ien Type: Electrostatic filters Separation efficiency: 99.9% Rated thermal output: 154 MW

Condition: used, Pipe heater, pipe burner, pipe construction burner -Max. Diameter: 250 mm -Burner for steel pipeline construction -Propane Dcodpfxob A Ix Sj Af Ien -Transport box -Dimensions: 600/1400/H330 mm -Weight: 90 kg

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 61108042022, 5-axis CNC tube bending machine BLM Dynamo ELE - MR200 Serial number: 61108042022 Year of construction: 2008 Machine weight: 1850 kg Dcjdpfxoqy E R To Af Isn BLM bar loader BLM CARM 7 Serial number: 340380106175 Year of construction: 2008 Weight kg: 650 With conveyor belt Without protective grid

Condition: used, functionality: fully functional, Year of construction: 2006, control type: hydraulic, degree of automation: semi-automatic, pipe diameter: 30 mm, Well-functioning tube bending machine with double bending blocks. fully adjustable single bending blocks present Dcsdpfx Aewtgydof Ion

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 24 h, Make: DURMA Type: HD-TC 60170 Fiber Year of construction: 2024 Automatic loading unit 6000 mm Unloading system 4000 mm Laser power: 2000 Watt Control: Siemens Sinumerik 840D Operating hours: 24 h Max. pipe diameter: 170 mm Min. pipe diameter: 20 mm (12 optional) Max. Square profile dimensions: 120x120 mm Dcodpfsdx Nfwex Af Ien Max. Dimensions of rectangular profiles: 150x100 mm Max. Profile length: 6500 mm Min. profile length: (for automatic feed) 3000 mm Max. Profile weight: 37.5 kg/m Max. Material thickness: (for 2 kW) 8 mm Min. material thickness: 0.8 mm Length of the last inserted part: 185 mm Positioning accuracy: +/- 0.20 mm Repeat accuracy: +/- 0.05 mm Max. Loading capacity: 3000 kg Profile types: round, square, rectangular, elliptical H,C,U,L *Installation area L/W/H: approx. 16000x7400x2350 mm * Weight: approx. 20000 kg * depending on equipment variant Standard equipment Sinumerik 840D control system Autofocusing PRECITEC Procutter cutting head F150 focus Manual unloading table Manual loading Laser diode for defining position points Central lubrication Chip conveyor External user interface for the output of analog values (power-speed-pressure) External CAD/CAM programming software Lantec with autonesting Work area lighting Warning light Various laser cutting options selectable Remote control: remote maintenance access via LAN connection or WLAN CE marking Extended equipment IPG fiber laser source 2000 Watt (incl. cooler) Automatic loading unit 6000 mm Unloading table 4000 mm Filter, compact dust extraction - Vanterm The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration in Staufenberg. We will be happy to send you further information on request.

Condition: good (used), Year of construction: 2008, INSMAN FIELD CVA-IF-3 Steam Boiler water-tube type Maximun continuous production 3000 Kg/h Power 2132 Kw / 1,825,000 kCal/h Maximum operating pressure: 29 bar Test pressure 37.7 bar Heating surface 133.56 m2 Dodpfx Afowryazo Iscn Total volume 4,381 m3 Max. temperature service 232.8 ºC DUNPHY Brand modulating type burner. Model TG 37 ZM LC PV. Natural gas power 500-2200 Kw Available documentation

Condition: used, Year of construction: 1999, functionality: fully functional, pressure: 96 bar, operating temperature: 525 °C, Type Stirred tube boiler with granulation chamber Serial Number / Year of Commissioning 3121 / 1999 Producer Vitkovice a.s. Ostrava Contractor of Boiler Greening (Year of Commissioning) PROVYKO, s.r.o. (2018) ČKD PRAHA DIZ (2016) Nominal Boiler Output 200 t/h Economic Performance 170 t/h Minimum Performance Without Stabilization 120 t/h Superheated Steam Pressure 9.6 MPa Superheated Steam Temperature 525 °C Feed Water Temperature 150 °C Boiler Efficiency 91.2 – 92.6 % Dedust Removal / Permanent Operational Separability of Filters Electrostatic filters / 99.9% Dodewwr Iuspfx Af Iscn Rated Thermal Output 154 MW

Condition: used, Sputter target, tube, pipe Dcjdpfx Afjb Ilw Ue Ien -Tube dimensions: Outside: Ø 152 mm Inside: Ø 125 mm Total length: 3249 mm -Number: 2x pipes available -Price: Complete -Incl. Transport box -Dimensions box: 3600/570/H585 mm -Weight: 306 kg

Condition: good (used), functionality: fully functional, Year of construction: 1988, machine/vehicle number: 4771, total length: 7,000 mm, total width: 3,500 mm, total height: 1,300 mm, Dorn tube bending machine with tools Dsdpfx Aswrpz Isf Iscn

Condition: as good as new (ex-display), Year of construction: 2024, Make: DURMA Type: HD-TC 60170 Fiber Year of construction: 2024 Automatic loading unit 6000 mm Unloading system 4000 mm Laser power: 2000 Watt Control: Siemens Sinumerik 840D Operating hours: 24 h Max. pipe diameter: 170 mm Min. pipe diameter: 20 mm (12 optional) Max. Square profile dimensions: 120x120 mm Max. Dimensions of rectangular profiles: 150x100 mm Max. Profile length: 6500 mm Min. profile length: (for automatic feed) 3000 mm Max. Profile weight: 37.5 kg/m Max. Material thickness: (for 2 kW) 8 mm Min. material thickness: 0.8 mm Length of the last inserted part: 185 mm Positioning accuracy: +/- 0.20 mm Repeat accuracy: +/- 0.05 mm Max. Loading capacity: 3000 kg Profile types: round, square, rectangular, elliptical H,C,U,L *Installation area L/W/H: approx. 16000x7400x2350 mm * Weight: approx. 20000 kg * depending on equipment variant Standard equipment Sinumerik 840D control system Autofocusing PRECITEC Procutter cutting head F150 focus Manual unloading table Manual loading Laser diode for defining position points Central lubrication Chip conveyor External user interface for the output of analog values (power-speed-pressure) External CAD/CAM programming software Lantec with autonesting Work area lighting Warning light Various laser cutting options selectable Remote control: remote maintenance access via LAN connection or WLAN CE marking Extended equipment IPG fiber laser source 2000 Watt (incl. cooler) Automatic loading unit 6000 mm Dcodpfx Ajd Tt Atof Ien Unloading table 4000 mm Filter, compact dust extraction - Vanterm The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration in Staufenberg. We will be happy to send you further information on request.

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Ideal for building demolition shears, scrap shears, loppers -Connections via the piston rod -Piston diameter: approx. 150 mm -Piston rod diameter: 80 mm Dodpeb A Hufjfx Af Iscn -Stroke: approx. 420 mm -Total length extended: 1800 mm -Ideal for machines where the piston rod has to be protected -Number: 6 pieces available -Price: per piece

Condition: new, Year of construction: 2024, Tube and flatbed laser 4 kW | Combi HD-F 3015 BH Laser combination machines Machine dimensions: - (L x W x H) 9,350 mm x 3800 mm x 2300 mm, length with filter 5300 mm. Technical details: - Max. Sheet size: 3,048 x 1,524 Max. - Max. sheet weight: 200 kg/m² -Laser power (IPG): 4 kW -travel Z - axis: 125 mm -Max. Synchronous speed (X-Y): 141 m/min. -Max. Acceleration (X-Y): 10 m/s² - positioning accuracy: ±0.05 mm Dodpofl T T Njfx Af Ijcn - Repeat accuracy: ±0.05 mm Cutting area: - steel: 20 mm - stainless steel: 10 mm - Aluminium (AlMg3): 12 mm - brass: 10 mm - copper: 6 mm Equipment: IPG 4000W Fiber Laser Source (including cooler) Compact dust extractor (filter) for 4 kw Air conditioning in switch cabinet Flatbed laser with automatic shuttle table Laser cut monitoring Automatic laser head positioning CE - shuttle table with light barrier protection Control SIEMENS SINUMERIK 840D Auto focusing Precitec Procutter F150 focus cutting head Flatbed laser with shuttle table (automatic pallet changing system) Pipe cutting device lateral max. Ø400 mm Sheet metal testing (Autom. sheet metal position and size measuring system) Positioning laser diode Automatic nozzle cleaning Central lubrication Motorized chip conveyor Simple user interface parameters page (performance-speed-pressure) Software Lantek or Metalix Cad/Cam Software with Autonesting Lighting for the work area Multi-chamber suction system warning light Special Laser Cutting Options Positioning laser diode Pierceline (E

Condition: new, Year of construction: 2024, The Durma HD-TC 60220 pipe laser stands for maximum precision and efficiency in the processing of pipe materials. With its impressive maximum pipe diameter of Ø220 mm and the ability to cut both square profiles of 160 x 160 mm and rectangular profiles of 200 x 100 mm, this pipe laser offers exceptional flexibility for a wide range of applications. Thanks to the advanced automatic loading system, which can handle tubes up to Ø170 mm in diameter, and the ability to process materials up to 6500 mm in length, the HD-TC 60220 is ideal for projects that require fast production with consistently high quality. The minimum material length for automatic loading is 3000 mm, which further increases the efficiency of the machine and reduces processing time. Dcodpfx Afeq Tpkye Ion Max. Tube diameter: Ø220 mm Laser power: 3 kW Max. Dimensions of the square profile: 160 x 160 mm Max. Dimensions of the rectangular profile: 200 x 100 mm Min. pipe diameter: 20 mm (12 mm with manual loading) Max. Tube diameter for automatic loading: Ø170 mm Max. Profile dimensions for automatic loading: 150 x 100 mm, 120 x 120 mm Max. Material length: 6500 mm Min. material length for automatic loading: 3000 mm Length of the last piece: 4000 / 6000 mm Unloading length: 150 mm Max. Material weight per meter: 52 kg/m Max. Material weight (total length): 340 kg Max. Loaded weight: 3000 kg Profile types: Round, Square, Rectangular, Elliptical Types of open profiles: L, U