Used Trumpf Tc 500 R for sale (383)

Condition: ready for operation (used), Trumpf 150 MQ VIS focusing optic 22-43-69-00, used, in good condition, 100% functional, scope of delivery as per photos. Bedpezu Hltsfx Albjwt

Condition: ready for operation (used), TRUMPF 200 MQ VIS focusing optic + Haas - Laser NBB 22-30-20-00 SN:9061842, used, normal signs of wear, 100% functional, delivery scope as shown in the photos. Bjdpfszu Hlyjx Albewt

Condition: ready for operation (used), TRUMPF Laser 17x E11V 060050840, used, in good condition, 100% fully functional, scope of delivery as per photos Bwsdpfx Aozu Hl Telbet

Condition: ready for operation (used), Trumpf / Hüttinger 1456168 control box Flow 36-48kW SN: 200128104 - 13.56MHz E, used, in good condition, 100% functional, scope of delivery as per photos Bedpfx Alezu Hkpjbjwt

Condition: ready for operation (used), Trumpf 12-11-59-00/02 Radiation Protection B SN: , used, in good condition, 100% fully functional, scope of delivery as per photos. Bwjdpfszu Hkvox Albot

Condition: ready for operation (used), Trumpf test module for direct current, used, in good condition, 100% functional, scope of delivery as shown in the photos. Bjdpfx Aezu Hmkelbjwt

Condition: ready for operation (used), Year of construction: 2005, laser power: 2,000 W, ITEC Automation & Laser AG: Gantry Portal for Coil Line with Trumpf TCF 1 Laser + GSW AG Reel MHR 2.5 / 1250 + Straightening Machine VRMA 80 / 76 + Motoman ERCS-HP20-AE00 Robot The system will remain in operation until week 35. The system has been continuously maintained and partially overhauled in 2022. Sale is without extraction system and platform! TECHNICAL DETAILS Trumpf TCF 1 MHR 2.5 / 1250 Wavelength: 10.6 µm Max. Output Power: 2,000 W Continuously adjustable power range: 100–2,000 W Power stability relative to rated power: ±2% Beam diameter at the output window: 26 mm Divergence angle (half angle): 0 mrad Power distribution: TEM₀₀ Pulse frequency: 10 Hz–100 kHz Marking mode frequency: 10 Hz Marking mode power: 80 W Pulse width: 10 µs–CW Reel MHR 2.5 / 1250 Load capacity: max. 2,500 kg Coil outer diameter: max. 1,250 mm Strip width: max. 600 mm Spreading range: min. 380 (480) mm Spreading range: max. 430 (530) mm Mandrel height: 1,000 mm Drive and Speed Speed: approx. 17.5 rpm Electrical drive power auxiliary drive: 1.1 kW Electrical Connection Connection voltage: 3 × 400 V Frequency: 50 Hz Noise Emission Bwjdpfx Aozu Avzjlbst Noise level: 70 dB(A) EQUIPMENT Fixed rear edge Neutral conductor (N) and protective conductor (PE) Straightening Machine VRMA 80 / 76 Passage width: max. 100–800 mm Strip thickness: min. 0.4 mm Strip thickness: max. 1.5 mm Strip thickness at full width: max. 1.0 mm Number of straightening rolls: 7 Number of tension rolls: 2 Roller diameter: 60 mm Straightening roll spacing: 130 mm Speed: approx. 15 m/min Passing height above the floor: approx. 1,000 mm Drive type: Servo motor Electrical drive power: 2.2 kW Drive speed: 3,000 rpm Connection voltage: 3 × 400 V Frequency: 50 Hz Conductors: N, PE Noise level: 70 dB(A) Robot Motoman ERCS-HP20-AE00 Number of axes: 6 Load capacity: 20 kg Positioning repeatability: ±0.06 mm Weight: approx. 280 kg S-axis (rotation): ±180° L-axis (lower arm): +155° / -110° U-axis (upper arm): +255° / -165° R-axis (wrist rotation): ±200° B-axis (wrist bending): ±140° T-axis (wrist rotation): ±360° Speed S-axis: max. 2.96 rad/s / 170 °/s Speed L-axis: max. 2.96 rad/s / 170 °/s Speed U-axis: max. 3.05 rad/s / 175 °/s Speed R-axis: max. 6.20 rad/s / 355 °/s Speed B-axis: max. 6.02 rad/s / 345 °/s Speed T-axis: max. 9.16 rad/s / 525 °/s The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If collection is not carried out on time, a storage fee of €20.00 per lot and day started will be charged. The fee must be paid before collection. The sale is made without any guarantee or warranty. The information on the technical data comes from the original offer. No guarantee is given for printing and measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 2,044 h, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D sl, laser power: 6,000 W, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, number of axes: 3, This 3-axis TRUMPF TruLaser 5030 fiber L76 FMC was manufactured in 2022. It features a working format of 3,000 x 1,500 mm and a powerful 6000W solid-state disk laser. The machine includes an automatic longitudinal pallet changer and advanced cutting capabilities, such as adaptive lens systems and automatic nozzle changers. If you are looking to get high-quality fiber laser cutting capabilities, consider the TRUMPF TruLaser 5030 fiber L76 FMC machine we have for sale. Contact us for further details. • Working format/area: 3,000 x 1,500 mm; X 0–3,000 mm / Y 0–1,500 mm / Z 0–115 mm • Machine design: Closed machine frame; gantry drive with direct linear drives; automatic longitudinal pallet changer; integrated control cabinets and storage cabinet; working-area lighting; machine status light; water/air machine and laser chiller; CE compliant; ambient temp 5–35 °C • Dynamics/accuracy: Max simultaneous axis speed 280 m/min; Ps 0.03 mm; Pa 0.05 mm; min programmable increment 0.001 mm • CNC control: Siemens SINUMERIK 840D sl with 21.5" color MultiTouch; MultiTouch HMI; USB and RJ45; integrated technology data; programmable cutting gas/pressure; production planning; multi-sheet processing; automatic shutdown; Remote Support interface; Condition Guide; Cutting Guide; Central Link; Online Update Manager • Laser source: TRUMPF TruDisk 6001 (6 kW) solid-state disk laser; fiber-optic beam delivery; one LLK output; closed beam guidance; high back-reflection resistance; stable output over service life • Cutting head: Universal cutting unit; single cutting-head strategy; adaptive lens system; protective glass with online condition monitoring; auto nozzle centering; collision protection; capacitive height control; automatic focal position; pilot laser • Standard cutting functions: AdjustLine; BrightLine fiber; ControlLine; FastLine; FlyLine; FocusLine; NitroLine; PierceLine; Performance package; Highspeed cutting package; Copper and Brass cutting packages; Micro-weld • Additional cutting package: Highspeed Eco (fusion cutting, medium-thickness stainless steel) with up to 70% cutting-gas reduction and up to 100% sheet throughput increase Bwjdpfx Alozuzwdjbet • Automatic nozzle changer: 21 positions; automatic change/cleaning/re-setting tied to material/process; reduces setup/handling • Drop&Cut: Integrated camera; assigns live image of residual sheet to part geometry; live cutting preview; no separate programming needed for basic use • Process monitoring camera: Front-area monitoring (~2.5 m); remote observation; preliminary result assessment; video stream output to external monitor • Pallet/material handling (machine-integrated): Automatic longitudinal pallet changer; loading/unloading parallel to machining; pallet access from three sides • 1 x license TruTops Boost Additional equipment • LiftMaster Compact 1530 (AL34) automatic loading/unloading system • Type 1530; max sheet 3,000 x 1,500 mm; min sheet 1,000 x 1,000 mm • Max sheet thickness 25 mm; max sheet weight 900 kg; max unloading weight 900 kg • With rake lifter: max thickness 25 mm; with rake lifter + belt system: max thickness 15 mm • Minimum part size with rake lifter: 150 x 150 mm • LiftMaster equipment/options • Storage connection; extended pallet travel out of machine • Sheet separation device; double-sheet detection; synchronous loading • Thin-sheet separation (0.8–2.0 mm); loading station for 90 mm stack height • Structural-steel loading grippers, 67 mm pitch, replaceable tines

Condition: ready for operation (used), Year of construction: 1998, overall weight: 8,600 kg, This 6-axis TRUMPF TrumaBend V85S press brake was manufactured in 1998. It features a bending length of 2,550 mm, an 850 kN bending force, and a 6-axis back gauge. The Delem 65 CNC control enhances precision, while the electro-hydraulic twin cylinder drive ensures robust performance. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V85S machine we have for sale. Contact us for more information about this machine. Additional equipment • Extended Installation Height and Stroke: Additional 150 mm each • 2nd Foot Switch Machine Benefits Technical Machine Benefits • Drive type: electro-hydraulic twin cylinder with independent y1/y2 movement • Power requirements: 11 kw / 415 v / 50 hz • Design: down-stroking with dual cylinder electro-hydraulic ram drive via proportional valves • Inclination of beam (y1/y2): +10 mm • Bending force: 850 kn // gap between columns: 2260 mm // throat depth: 410 mm // stroke length: 215 mm // open height: 385 mm • Bed width: 120 mm • Ram measurement: incremental with deflection compensation • Tool holders: self-centering top tool holder, hardened bottom tool holder • Hydraulic tool clamping: hydraulic clamping for both top and bottom tools • Safety features: safety screens, light barriers, single/double break modes // front support brackets: two quick-adjustable brackets Extra Information Back Gauge: CNC-controlled ‘X’ and ‘R’ axis back gauge with safe 2-finger adjustment X-axis Back Gauge Travel: 600 mm Maximum X Distance: 860 mm R-axis Vertical Travel: 250 mm Back Gauge Travel Speed: 500 mm/sec R-axis Speed: 300 mm/sec Bodozuxkhjpfx Albswt Z1/Z2 Axis: CNC-controlled, asymmetric finger adjustment Working Speeds: Approach Speed: 200 mm/sec Operation Speed: 1–10 mm/sec Return Speed: 135 mm/sec Technical Specification Bending Length 2550 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 55,771 h, laser hours: 35,157 h, laser power: 3,200 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 150 mm, positioning speed: 140 m/min, positioning accuracy: 0.02 mm, year of last overhaul: 2025, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 150 mm, Equipment: centralized greasing system, cooling unit, documentation/manual, emergency stop, safety light barrier, The laser was fully functional and in very good technical condition until its professional dismantling. The machine was regularly serviced by an authorized service provider, and a complete service history is available. In 2025, all mirrors were completely replaced. The dismantling and professional disconnection of the machine were carried out by an authorized service provider. The machine is currently safely stored in a dry warehouse and is ready for shipment. Videos of the machine in operation are available. Bedpfx Alov Hxbbsbjwt

Condition: used, Year of construction: 2014, controller manufacturer: Siemens, controller model: Siemens 840D, _____ Description: Year of manuf. : 2014 Power : 3000 kW Technical Specifications Working area:X = 3,000 mm / Y = 1,300 mm / Z = 600 mm B-axis:135° C-axis:n × 360° Laser light cable:30 m LLK:0.10 mm Control system:Siemens 840D Bsdjzuq Npopfx Albjwt Teach panel:including teach software Equipment :- Safety enclosure with 1 window and a column for the control panel :- Safety cabin for the rotary changer :- Rotary changer, Ø 4,000 mm :- Extraction pipework :- Scrap conveyor belt :- Status indicator light at the top :- 2 × loading status lights for the rotary changer :- 4 × configurable control interfaces :- Anti-tripping guard Laser Nitrogen:present Oxygen:present Argon:not present Air:not present FastLine Cell:not present ObserveLine:not present Probe:not present

Condition: ready for operation (used), Year of construction: 2018, operating hours: 2,874 h, punching force: 17 t, sheet thickness (max.): 6 mm, number of axes: 3, This 3-axis TRUMPF Trupunch1000 S05 was manufactured in 2018. It features a working area of 2500 x 1250 mm and is equipped with maintenance-free three-phase motors. The machine includes a linear magazine with 20 stations for clamps and tools, and an electro-hydraulic punching head with programmable features. If you are looking to get high-quality punching capabilities, consider the TRUMPF Trupunch1000 S05 CNC punching machine we have for sale. Contact us for further details. Bwodezc R Enjpfx Albjt - Working Area: 2500 x 1250 mm (Medium Format)- Drives: Maintenance-free three-phase motors- Frame: C-frame- Tool Storage: Linear magazine with 20 stations for clamps and tools- Clamps: 2 hydraulic sheet clamps- Punching Head: Electro-hydraulic punching head, rotating mono-tool adapter, programmable stripper position, tool length compensation, slug extraction- Functions: Forming, MultiTool, MultiBend, Thread forming with tap breakage control, Signing / fast beading- Control: TRUMPF control based on Rexroth IndraMotion MTX- Interface: USB interface, RJ45 network connection, Wireless Operation Point (VOS basis)- Table Type: Ball table with brush inserts- Safety: CE marking, multi-beam light barriers, rapid drive shutdown- Frequency: 50 Hz- Voltage: 400 V- Included Accessories: 18 original Trumpf tool cassettes (including 10 RTC-cassettes 2017 with die plates from original order), extensive selection of punching tools, and a Trumpf "quicksharp" punch grinding machine (YOM 89)

Condition: ready for operation (used), Year of construction: 2022, operating hours: 715 h, controller manufacturer: SIEMENS, laser power: 3,000 W, punching force: 18 t, sheet thickness (max.): 6 mm, overall weight: 18,500 kg, total width: 9,945 mm, total height: 2,500 mm, product length (max.): 8,862 mm, number of axes: 3, This 3-axis TRUMPF TruMatic 6000-1600 fiber was manufactured in 2022. It features a maximum laser power of 3,000 W and a punching force of 180 kN, with a maximum punching frequency of 917 strokes/min. The machine has a large working area, allowing for combined punching and laser processing. If you are looking to get high-quality punching and laser cutting capabilities, consider the TRUMPF TruMatic 6000-1600 fiber machine we have for sale. Contact us for further details. Bodpjzul Dzsfx Albjwt • Laser source: TruDisk 3001 solid-state laser, 3,000 W, fiber-optic beam delivery (10 m), compact cutting head, anti-collision, protective glass, closed beam guidance, programmable cutting gas pressure • Control/OS/Interface: Rexroth IndraMotion MTX CMP70; Windows Embedded; 17-inch touchscreen; 4 GB program memory; 320 GB HDD; USB; RJ45 10/100 Mbit/s; Internet teleservice; integrated technology database; NC program management; production planning; automatic machine shutdown; network connection for programming/production systems • Working area: • Punching (no reposition): 3,050 x 1,550 mm • Laser cutting (no reposition): 3,050 x 1,550 mm • Combined (no reposition): 2,500 x 1,550 mm • Combined (with reposition): 3,050 x 1,550 mm • Max sheet thickness: 6.4 mm; Max workpiece weight: 230 kg • Max part size via flaps: 500 x 500 mm (laser) / 500 x 500 mm (punching); via chute: 80 x 50 mm • Axes/performance: • Drives: Maintenance-free AC servo motors (X/Y/C); electrohydraulic punching head • Max speeds: X 90 m/min; Y 90 m/min; simultaneous 108 m/min; C-axis 330 rpm (punching/thread forming) • Frequencies: Max punching at E=1 mm: 917 strokes/min; marking: 2,800 strokes/min • Accuracy: Pa ±0.1 mm; Ps ±0.03 mm; min increment 0.001 mm • Punching unit: • Force: 180 kN; electrohydraulic head; rotary single-station tool holder • Tool circumferences: punching 76.2 mm; forming 101.6 mm; optional 110 mm • Change times: basic 3.2 s; MultiTool 0.3 s • Magazine: 25 linear positions; standard 22 tools; up to 220 with MultiTool • Clamps: 3 hydraulic; fully rotatable tools; programmable blank-holder; tool length compensation; punch lubrication; chip extraction with automatic tube emptying and fill-level estimation; stroke counter; tool lubricant level monitoring; WhisperTools compatible • Forming/punching functions: • MultiTool; MultiBend; thread forming (M2.5–M10); surface marking/embossing; vertically movable clamps • Max MultiBend: width 55 mm; height incl. material 25 mm; angle up to 90° • Automatic thread-forming lubrication; thread counter • Laser cutting capability (max thickness): • Mild/structural steel: up to 6 mm (O2 or N2) • Stainless steel: up to 6 mm (N2) • Aluminum: up to 5 mm (N2) • Laser functions: NitroLine; FocusLine; FastLine; FlyLine; ControlLine; slug detection; ejector cylinder for laser-cut parts; laser event log; automatic cutting-head height adjustment • Standard machine equipment and safety: • Rigid C-shaped welded frame; coordinate guide system; linear tool magazine • 3 hydraulic clamps; programmable repositioning; foot switch for clamp closing • Radiation protection at cutting head; two 500 x 500 mm part flaps with sensors • Ball tables; two finished-part containers; chip container • Compact dust extraction and filtration unit • Water-air cooling unit (machine and laser) • Initial hydraulic oil filling • Two-level safety light curtains; fast drive shutdown; protection against scattered laser radiation

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser power: 4,000 W, X working area max.: 3050 mm Y working area max.: 1550 mm Control: Rexroth IndraMotion MTX Laser power: 4,000 watts Standard equipment: Machine - Sturdy, easily accessible C-frame - Coordinate guidance for high-precision machining - Linear tool changer with 21 tool stations and 4 clamps - Maintenance-free three-phase drive motors - Repositioning device with programmable hold-down - Foot switch for closing clamps - 2 good parts containers - Automatic shutoff Laser station - TruFlow laser - High-frequency excitation - Cooling unit - TASC 3 laser controller - Enclosed beam guidance - Beam tube ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection - LensLine - FocusLine - ControlLine - NitroLine - SprintLine - ContourLine - FlyLine - PlasmaLine - High-speed cutting - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook function Punching station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down with adjustable force - Stroke counter for punches - Spray lubrication for punches - Punch slug extraction - Warp detection - Flap for punched parts 500 x 500 mm - Fill level monitoring in the punching console Control - Open control system based on Bosch Rexroth IntraMotion MTX - Operating panel with 15" TFT touchscreen - Program management and 80 GB storage capacity - Diagnostic function with laser logbook - Integrated technology data - Teleservice Data transfer - Network connection RJ45 and USB interface Safety - CE marking - Multi-beam light barriers - Monitoring system for, among others, gas pressure, temperature, cooling water - Hydraulic quick shut-off - Protection against stray radiation - Compact extraction unit - TruFlow 4000 - Vibration-dampened installation Bedjy Saqgjpfx Albowt - Thread forming function - MultiTool function - Chip conveyor with tilting container - Active die - Ejector for small parts - Brush tables with loading aid - Marking function - Repositioning cylinder - Warp detection

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, laser power: 3,000 W, X Working area max.: 2500 mm Y Working area max.: 1250 mm Control: IndraMotion MTX Laser power: 3000 watts Standard equipment: Machine - Coordinate guide for high-precision machining - Stable, easily accessible C-frame - Linear magazine with 21 tool positions and 4 clamps - Drives with maintenance-free three-phase servo motors - Repositioning device with programmable hold-down device - Foot switch for clamp closing - Ball tables - 2 part flaps 500 mm x 500 mm - FocusLine - NitroLine - FastLine - Ejection cylinder for laser parts - Slag cone detection TRUMPF laser - TruDisk 3001 solid-state laser with 1 LLK outlet - Excitation via pump diodes - LLK according to standard layout (10m) - TruControl laser control 1000 - Cooling unit - Laser logbook function Cutting head - Solid-state laser compact cutting unit - ControlLine Punching head - Electro-hydraulic punching head - Rotatable mono tool holder - Tool length compensation - Programmable hold-down device (active / passive / repositioning) - Punch stroke counter and thread stroke counter - Spray lubrication of punch - Punch slug extraction - Calculation of filling level in the punching console - Level monitoring of thread forming and tool lubrication Control - Open control based on Rexroth IndraMotion MTX - Control panel with 17" touch control panel - Program management - Production plan - Integrated technology data - Teleservice via Internet - Programmable cutting gas pressure - Automatic switch-off with wake-up mode Data transfer - USB interface - RJ-45 network connection Safety - CE marking - Two-beam light barriers - Monitoring system for, among others Gas pressure, temperature, cooling water Bsdpfxjy Samus Albewt - Quick shutdown hydraulics - Protection against scattered radiation - Compact dust extraction system - MultiTool function - MultiBend function - Thread forming function - Engraving function - Deburring and rolling technology function - SoftPunch function - StripLine - Lowerable die - Spray lubrication die including level monitoring - Additional clamping claw - 4 pcs. Height-adjustable clamping claws - Vibration-damped installation - Chip conveyor with tilting container - Blow-out device for small parts - Warping detection SheetMaster - Unloading platform - Suction frame with 36 suction cups - Peeling suction cup - Vacuum sensors for each suction cup - Double sheet detector for double sheet control - Central lubrication - TRUMPF control based on Rexroth IndraMotion MTX - Automatic clamp closing machine - Loading and unloading parallel to production time - Peeling system including positioning aid medium format (2500x1250) - First additional suction cup package standard - Second additional suction cup package standard - Unloading monitoring laser parts GripMaster - Parts conveyor belt punching station - Parts conveyor belt laser station ToolMaster with 70 stations (only for punching operation) - ToolMaster set-up parallel to production time

Condition: good (used), Year of construction: 2007, functionality: fully functional, Press force: 170 t Bedpezt R Euofx Albewt Bending length: 3050 mm Distance between uprights: 2550 mm Stroke: 445 mm Accessories: - 2 front support arms - Light curtain in front of the machine - Foot switch - Wila quick-release system at the top and bottom - TASC 6000 control system - Die shifting mechanism - Including tools - Crowning - 6-axis back gauge

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Press force: 300 t Bending length: 4050 mm Distance between uprights: 3550 mm Control system: EHT EPS D01-3D Total power requirement: 30 kW Machine weight (approx.): 24,000 kg Machine height: 3.60 m Operating hours (approx.): 12,000 h Accessories/Equipment: Rear back gauge system, 5-axis Travel range and back gauge area Travel range X-axis: 600 mm Max. back gauge range in X: 1000 mm Travel range X1-axis: ± 125 mm Travel range R-axis: 200 mm Travel range Z-axis: 3150 mm Accuracy Positional deviation of the axes X-axis: 0.02 mm X1-axis: 0.02 mm R-axis: 0.05 mm Z-axis: 0.05 mm Speeds X-axis: 1200 mm/s X1-axis: 300 mm/s R-axis: 200 mm/s Z-axis: 1200 mm/s Bodpfxjzt R A Ho Albjwt

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 64,000 h, machine/vehicle number: S1631C0027, laser hours: 40,000 h, laser power: 3,000 W, Equipment: cooling unit, documentation/manual, safety light barrier, For Sale – TRUMPF TruLaser Cell 8030 (2015) | 3D Laser Cutting System A rare opportunity to acquire a premium 3D laser cutting system from TRUMPF, fully maintained and production-ready. Ideal for automotive, aerospace, and general metalworking applications requiring precision 3D contour cutting on tubes, hydroformed parts, and complex profiles. Machine at a glance Model: TRUMPF TruLaser Cell 8030 Year of manufacture: 2015 Laser source: 3,000 W TRUMPF (CO₂ / solid-state – to be confirmed on inspection) Operating hours: 70,000 h total / 41,125 h beam-on Condition: Fully operational, currently in series production Service history: Annual maintenance exclusively by TRUMPF – complete documentation available Why this machine 5-axis CNC kinematics for demanding 3D geometries Enclosed, automation-ready workspace Proven performance in both high-mix/low-volume and medium series production Original TRUMPF engineering – Made in Germany Uninterrupted OEM service record – no third-party interventions Our difference: modular handover, not just a machine sale We are not a trading company. We are an active laser job shop operator (SOERMEL Groupe, France – 65 staff, 12 M€ revenue, IATF 16949 / EN 9100 / ISO 9001 certified). Buyers benefit from our operational know-how through four service packages – choose what fits your project: Bwodsukhltjpfx Albot ModuleScope M1 – Ex WorksPick-up at our site, loaded onto your truck. Machine tested before handover.Buyers with own rigging and installation capacity. M2 – DeliveredM1 + international transport, insurance, and unloading at your facility (DAP/DDP on request).Buyers with internal installation team. M3 – Delivered & InstalledM2 + mechanical installation, utility connection, first power-up, laser alignment.Buyers without dedicated installation resources. M4 – TurnkeyM3 + commissioning, process validation with your parts, operator and maintenance training, acceptance protocol.Buyers who want the machine producing from day one. On-site inspection and sample cuts on your own parts available at our facility in France prior to purchase.

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 70,000 h, machine/vehicle number: S1631C0047, laser hours: 38,125 h, laser power: 3,000 W, Equipment: CE marking, cooling unit, documentation/manual, emergency stop, fume extraction, safety light barrier, For Sale – TRUMPF TruLaser Cell 8030 (2015) | 3D Laser Cutting System A rare opportunity to acquire a premium 3D laser cutting system from TRUMPF, fully maintained and ready for production. Ideal for automotive, aerospace, and general metalworking applications requiring precise 3D contour cutting on tubes, hydroformed parts, and complex profiles. Machine at a glance Model: TRUMPF TruLaser Cell 8030 Year of manufacture: 2015 Laser source: 3,000 W TRUMPF (CO₂ / solid-state – to be confirmed upon inspection) Operating hours: 70,000 hours total / 41,125 hours beam-on Condition: Fully operational, currently in series production Service history: Annual maintenance exclusively performed by TRUMPF – complete documentation available Why this machine 5-axis CNC kinematics for demanding 3D geometries Enclosed, automation-ready workspace Proven performance in both high-mix/low-volume and medium series production Original TRUMPF engineering – Made in Germany Uninterrupted OEM service record – no third-party interventions Our difference: modular handover, not just a machine sale We are not a trading company. We are an active laser job shop operator (SOERMEL Groupe, France – 65 employees, 12 million euros in revenue, IATF 16949 / EN 9100 / ISO 9001 certified). Buyers benefit from our operational know-how through four service packages – choose the one that fits your project: Module Scope M1 – Ex Works: Pick-up at our site, loaded onto your truck. Machine tested before handover. For buyers with their own rigging and installation capabilities. M2 – Delivered: M1 + international transport, insurance, and unloading at your facility (DAP/DDP on request). For buyers with an internal installation team. M3 – Delivered & Installed: M2 + mechanical installation, utility connection, first power-up, laser alignment. For buyers without dedicated installation resources. M4 – Turnkey: M3 + commissioning, process validation with your parts, operator and maintenance training, acceptance protocol. For buyers who want the machine producing from day one. Bsdpfx Aljy E Iv Rebjwt On-site inspection and sample cuts on your own parts are available at our facility in France prior to purchase.

Condition: used, Year of construction: 2011, machine/vehicle number: E1053A0497, overall weight: 850 kg, For sale is a TRUMPF TruDisk 4002 (4C) disc laser / laser source, including a separate KLH cooling unit RW 20/0 SK. Laser technical data: * Manufacturer: TRUMPF Laser GmbH + Co. KG * Type: TruDisk 4002 (4C) * Year of manufacture: 01/2011 * Laser power: 4,000 W * Equipment No.: E1053A0497 * Supply voltage: 380 V (-10%) to 460 V (+10%), 3 AC + PE * Frequency: 50–60 Hz * Connection power: 23 kW / 25 kVA * Rated current: 34 A at 400 V * Protection class: IP54 * Weight: approx. 850 kg Cooling unit: * Manufacturer: KLH Kältetechnik GmbH * Type: RW 20/0 SK * Year of manufacture: 2017 * Part No.: E123223000AA * Serial number: 17KLH00670 * Voltage: 400/460 V Bodpfezvqfyjx Albswt * Frequency: 50/60 Hz * Refrigerant: R134a * Refrigerant quantity: 3.7 kg The TruDisk 4002 is offered together with the KLH cooling unit shown in the picture. Inspection is possible by arrangement. Further technical information and images can be provided upon request.

Condition: used, functionality: fully functional, Year of construction: 2007, machine/vehicle number: A0270 A0115, control type: CNC control, laser power: 5,000 W, sheet thickness (max.): 20 mm, power: 5 kW (6.80 HP), input voltage: 400 V, input current: 160 A, input frequency: 50 Hz, compressed air connection: 7 bar, For sale: TRUMPF TruLaser 5060 laser cutting machine, laser power 5,000 W, manufactured in 2007. The machine is fully operational, currently connected in production, and can be inspected while powered on by appointment. Technical data: Manufacturer: TRUMPF Model: TruLaser 5060 Machine type: A0270 Machine no.: A0270A0115 Year of manufacture: 2007 Laser power: 5,000 W Power supply: 400 V / 50 Hz Rated input: 105 kVA Required fuse protection: 3 × 160 A Control voltage: 24 V DC Bwodpfx Aszgc Hwelbst Compressed air: 7–10 bar Nitrogen N₂: 30 bar Oxygen O₂: 20 bar Included equipment: KLH Kältetechnik chiller, type L30/36-TK3.02 Refrigerant: R134a, filling quantity 21.5 kg Hante MF-L extraction/filter unit Air volume: 2,500 m³/h Filter area: 50 m² Standard accessories as per agreement Condition: Used machine, fully functional and currently connected in production. Inspection while powered on is possible in Košice, Slovakia. Sale with invoice. Price is net, VAT not included. Dismantling, loading, and transport are at the buyer’s expense and responsibility. The machine will be available for collection approximately from 09/2026, or by agreement. Location: Košice, Slovakia

Condition: used, Year of construction: 2011, laser hours: 68,800 h, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, We are offering this used TRUMPF TruLaser 3040 laser cutting machine, manufactured in 2011. Material number: 1441919 Control cabinet: TruLaser 3040 Power type 3: 50 Hz Voltage: 400 V Bwsdpfx Aozvbhxelbot Max. fuse rating: A Wiring diagram / version: 93730-5-210_05 Wiring diagram / version: 93730-5-2000_05 Wiring diagram / version: 93730-5-3000_05 Serial number: 933 Year of manufacture: 2011 Equipment number: A1240A0148 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2001, functionality: fully functional, Press force 85 t, Bending length 2050 mm, Distance between uprights 1750 mm, Control DELEM, Stroke 215 mm, Throat depth 410 mm, Total power 13 kW, Weight 8,750 kg, Machine dimensions 3190 x 2100 x 2375 mm Bsdpfow Imq Rex Albjwt

Condition: good (used), Year of construction: 2014, pressing force: 100 t, table length: 3,050 mm, clearance between the columns: 2,550 mm, overall weight: 7,700 kg, Press force: 100 t Bending length: 3050 mm Frame width: 2550 mm Total power requirement: 20 kW Bjdjztakgepfx Albewt Machine weight approx.: 7,700 kg Accessories/Equipment: - Light curtain in front of the machine - Tools - 2 stop fingers - DELEM DA 60 touch control - Foot switch

Condition: good (used), Year of construction: 2011, total length: 5,100 mm, total width: 2,200 mm, total height: 3,400 mm, overall weight: 19,700 kg, Press force: 230 t Bending length: 4050 mm Bedjztafqepfx Albjwt Distance between uprights: 3550 mm Upright overhang: 420 mm Oil capacity: 400 l Control system: ModEva 10S Machine weight (approx.): 19700 kg Dimensions: 5100 x 2160 x 3420 mm Equipment/Accessories: - Automatic tool clamping, pneumatic - Motorized crowning - Akas-Fiessler safety laser - Bending aid 1 + 2 (right and left) - Die shifting m1 and m2 - Axis-controlled: Y1, Y2, Xs, Xm, X delta, R, Z1, Z2