Used Trough Auger for sale (727)

Condition: ready for operation (used), Year of construction: 2003, WVT Bioflamm heating system / wood chip heating system with discharge Rated output: 291 kW Year of manufacture: 2003 Fuel: Biomass Factory number: 1217 Water content: 1670 liters Including discharge auger, agitator, and rotary valve Discharge is suitable for a silo size of 5 - 6 m. The system is still installed and must be dismantled by the buyer. The system is being sold on behalf of the customer and is immediately available. Location: Postal code 54 Subject to prior sale If you have any questions, just write to me and I will provide you with the contact details of our customer. Pjdpfx Asywn Nnjhvopp

Condition: used, maximum load weight: 35,850 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2023, next inspection (TÜV): 01/2026, loading space length: 10,648 mm, loading space width: 2,470 mm, loading space height: 2,100 mm, loading space volume: 55 m³, total width: 2,550 mm, total height: 3,640 mm, Year of construction: 2023, Equipment: ABS, 3-axle aluminum box trough GRANALU 55 cbm WATERPROOF First registration Loading length 10,648 mm Side height 2,100 mm Inner width 2,470 mm Total height/loading height 3,640 mm Empty weight only 6,150 kg HYVA tipping piston type ALPHA, suitable for low and high pressure Trough floor made entirely of 6 mm highly wear-resistant HERKAL Aluminum wave breaker on front and rear wall, protruding approx. 600 mm into the interior of the trough (removable) 1-wing rear wall door with pendulum function and pneumatic 4-way locking, waterproof design JOST axles with large disc brakes, 430 mm 1st axle LIFT AXLE WABCO trailer EBS with RSS anti-skid protection Psdpfxsw I Ixvo Ahvjpp 6-way tires 385/65 R 22.5 Air tank made of aluminum 2 LED reversing lights Aluminum drop supports full load RENTING is the new BUYING, also available immediately from us in full-service rental-----

Condition: used, Year of construction: 2012, TM Bohrtechnik TMB 25 drilling rig, year of manufacture: 2012, compressor operating hours: 6,006h, diesel engine operating hours: 8,718h, 6x drill rods, drill head, dust collector, immediately ready for use, good condition, German machine. Upon request, we can provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel.) will be happy to assist you. For further information, please visit our homepage. Subject to errors and prior sale! = More information = Pjdpfx Aheyxkmfsvepp Application: Construction Please contact Tobias Ebert for further information.

Condition: good (used), functionality: fully functional, We are selling a mobile auger chipper type HP50 from the manufacturer Sasmo/Laimet. It is powered by an 8-cylinder Scania diesel engine. The machine has a tracked chassis. The chipper can chip trunks up to a diameter of 60 cm. Pedpot Id Ixjfx Ahvepp

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,200 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Total loading area length approx.: 8,200 mm, low bed approx.: 6,000 mm long, loading height incl. approx. 890 mm, 22 x lashing eyes each 10 t, 10 x stake pockets in the outer frame, loading ramps (approx. 3,100 x 750 mm), climbing bar on the outside of the ramps and rear slope, loading ramps adjustable to the side, wooden floor 68 mm thick, storage box with lid for lashing chains or tensioning belts, contour markings according to regulations, rotating beacon, vehicle hot-dip galvanized, , incl. axle load indicators, , surcharge for:, warning signs with lighting and rotating beacon, widening to 3 m with Holzer, Price: 500 ¤, , excavator trough, Price: 1,000 ¤ net, , , --  Misprints, errors and changes excepted, sample pictures --, More details at: !, More details: ! Ppodpfxeyvli Ao Ahvep

Condition: used, Year of construction: 2007, (2007) Matsuura HPlus 300 PC11 CNC Horizontal Pallet Changing Machining Centre With Matsuura G-Tech 30i Contro Table Dimension 300 x 300mm. Maximum Table Load 250kg. Maximum Component Dimension Ø530mm x H760mm. Axis Travel 'X'=500mm, 'Y'=560mm, 'Z'=500mm, 'B'=0-360° (0.001° Increment). Distance Spindle Nose To Table 80-640 mm. Rapid Traverse 'XYZ'=60,000mm/min, 'B'=100rpm. Spindle Speed Range 50-15,000rpm (15kW Motor). Spindle Taper BT 40. 150 Position ATC. Maximum Tool Ø90mm (Ø150mm No Adjacent Tool), Maximum Tool Length 300mm, Maximum Tool Weight 8kg. S/No. 16950 (2007). Note: This lot is located in Hampshire (full site address to be added to the buyer’s invoice). With Dual Auger To FSE Chip Conveyor, FSE Through Coolant High Pressure Filtration System, Quantity Of Pallets With Tombstones, Spin Window, Hand Wheel, Signal Tower, Full Manuals, Tool Holders, Back Up CD/USB & Maintenance Records. New Spindle 18 Months ago at a cost of £20,000. Note: This lot is located in Hampshire (full site address to be added to the buyer’s invoice). Ppsdsyw Thcjpfx Ahvsp

Condition: excellent (used), CATALOGUE NUMBER 6114 TECHNICAL DATA - Feed hopper inlet: 800x1000 mm - Rotor working width: 800 mm - Pump motor: 0.75 kW - Main motor: 15 kW - Number of knives: 21 pcs - Knife size: 30x30 mm - Screen: 0.8x10 mm Ppjdpfx Ahox Rqtpovep - Pressure drawer - Electric auto-reverse - Discharge augers: 2×1.1 kW - Dimensions (L/W/H): 2460x1800x2250 mm - Weight: 1660 kg – German-made – Auto-reverse – Pressure drawer – Not painted – In very good condition – Used shredder Net price: 63,900 PLN Net price: 15,200 EUR depending on the exchange rate, 4.2 EUR (Prices may vary with significant exchange rate fluctuations)

Condition: used, mileage: 86,299 km, power: 62 kW (84.30 HP), first registration: 12/2010, fuel type: diesel, overall weight: 7,490 kg, next inspection (TÜV): 03/2028, color: orange, gearing type: automatic, emission class: euro5, number of seats: 2, loading space volume: 4 m³, Year of construction: 2010, Equipment: air conditioning, Internal vehicle no.: G300367 German vehicle Located at our yard in Kaufungen - Kassel, immediately available More information from Luis Lucena Mitsubishi FE 85 7C15 Sweeper Brock SL140 Sweeper body: Brock SL 140 with rear-view camera, 3,500 operating hours 4 cbm dirt container, 750 ltr. water tank Dirt container and water tank made of 1.4301 stainless steel GRP (fiberglass) cladding Sweeping units on right and left, each with a disc brush Pivoting roller brush Reduction gearbox Adjustable front-mounted broom Air-suspended seat Camera system Central lubrication system Hand spray gun with lance and hose reel Auxiliary engine Yanmar Air conditioning Reversing camera Tachograph Electric windows, and much more. 1 disc brush driven Suction nozzle Dirt container, trough Container tilting mechanism, discharge flap Debris container Spray water tank, and more Subject to errors and prior sale We are happy to take your used vehicle in part exchange. Financing available directly through us. GOLEC COMMERCIAL VEHICLES GMBH Ppjdpfxexnulnj Ahvep We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. ----.

Condition: used, empty load weight: 6,430 kg, maximum load weight: 27,570 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 01/2017, suspension: air, wheelbase: 1,350 mm, color: grey, mileage: 100 km, gearing type: mechanical, Equipment: ABS, Unladen weight: 6,430 kg, permissible total weight: 34,000 kg, air suspension (front and rear), electronic braking system (EBS), alloy wheels, trailer with coil trough, BPW axles, disc brakes, TÜV valid until 01/2027, Edscha sliding tarp, tires 385/65 R22.5, portal doors. Non-binding offer; errors and prior sale excepted. The image may not correspond to the actual offer. Ppjdpfxjyw Auls Ahvsp

Condition: as good as new (ex-display), Year of construction: 2026, The impressive advantages: Space-saving compact design - comfortable and powerful. Excellent surface quality and a pleasant working environment due to diagonallow-turbulence air-stroemung. Large detection window thanks to air guide plates – thus also suitable for larger factory troughs. Separation degree of paint mist up to 99%, return ability of the pre-filter up to 18 kg/m2 - thus great filter life! Easy and fast filter change on the front. Cost-cost replacement filters. Low acquisition costs and low energy requirements. Dry spray wall made of galvanized sheet steel with welded base frame, cardboard labyrinth filter as pre-filter and glass fiber filter as post-filter unit. Ex-fan incl. throttle valve attached to the left. Podpfsdqc U Hox Ahvspp Do not compromise on the quality of the surface. Suction-weighing Easy Paint are the ideal cost-effective application for the effective detection and filtering of the paint mist as well as the suction of the solvent dimempfe. Robust and powerful but economical in consumption. Thanks to the IPE double filtration system, two filter levels ensure a maximum separation degree of up to 99%. Thanks to the folded filter pockets, the cardboard labyrinth filter absorbs considerably more overspray (up to 18 kg/m2 filter area) than conventional filter mats. The downstream fiber glass fiber second-based filter absorbs only the finest residual particles. As a guideline, the cardboard labyrinth

Condition: new, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,800 mm, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Total loading area length approx.: 8,800 mm, low bed approx.: 6,600 mm long, loading height incl. approx. 890 mm, 24 x lashing eyes each 10 t, 12 x stake pockets in the outer frame, loading ramps (approx. 3,100 x 750 mm), climbing bar on the outside of the ramps and rear slope, loading ramps adjustable to the side, wooden floor 68 mm thick, storage box with lid for lashing chains or tensioning belts, contour markings according to regulations, rotating beacon, vehicle hot-dip galvanized, , incl. axle load indicators, , surcharge for:, warning signs with lighting and rotating beacon, widening to 3 m with Holzer, Price: 500 ¤, , excavator trough, Price: 1,000 ¤ net, , , --  Misprints, errors and changes excepted, sample pictures --, More details at: !, More details: ! Ppedpfx Aheyu Utmevsp

Condition: used, mileage: 149,418 km, power: 235 kW (319.51 HP), first registration: 06/2017, fuel type: diesel, empty load weight: 15,260 kg, maximum load weight: 10,740 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 3,900 mm, color: orange, driver cabin: day cab, gearing type: semi-automatic, emission class: euro6, suspension: other, number of seats: 3, total length: 10,200 mm, loading space volume: 22 m³, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, soot filter, traction control, Faun Variopress II522 527696 Combination loader Type Zöller2301 Delta New loading trough and wear plates! Suspension: 1st axle leaf spring, trailing steering axle with air suspension, reversing camera. Non-binding offer – subject to change and prior sale – sale takes place with exclusion of any warranty – all information provided without guarantee! Podpfsw E I Nqex Ahvopp

Condition: used, Year of construction: 2021, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed length X-axis: 1,270 mm, feed length Y-axis: 508 mm, feed length Z-axis: 635 mm, feed rate X-axis: 16 m/min, feed rate Y-axis: 16 m/min, feed rate Z-axis: 16 m/min, nominal power (apparent): 26 kVA, torque: 122 Nm, controller manufacturer: HAAS, Used Machining Center Brand: HAAS Model: VF-4 Year: 07/2021 Serial number: 1183245 Operating hours: Spindle on time: 6,000h Specifications: - Travels (X, Y, Z): 1270mm, 508mm, 635mm - Spindle-to-table distance (Min. - Max.): 107 - 742mm - Spindle speed: 8100 rpm - Spindle taper: ISO 40 - HAAS CNC Control - HaasDrop (for wireless file transfer to CNC) - Rigid tapping; synchronized tapping, with integrated tapping cycles and up to 8 retract speeds. - Safe Run; a HAAS Control software function that reduces the risk of significant damage in case the machine is impacted. - Tool changer carousel: 20 tools - Includes early power-failure detection module. - Coolant tank: 208 liters with coolant kit - Variable-flow coolant pump allows control of coolant flow and pressure via M-codes. Ppjdpfx Ajxqct Sshvep - Maximum tool diameter: 89mm (adjacent tool slots filled) - Maximum tool weight: 5.4kg - Table dimensions: 1321 x 495mm - Maximum table load: 1588kg - Maximum rapid traverse (all axes): 25.4 m/min Included options: - Preparation for through-spindle coolant - Auger-type chip conveyor - Programmable coolant nozzle, multi-position device that automatically and precisely directs coolant to the cutting tool

Condition: like new (used), Feed width: 50 cm Feed height: 104 cm Transport width: 110 cm Transport length: 455 cm Transport height: 242 cm Podpfx Ahoywdv Rjvopp Trough length: 300 cm Year of manufacture: 2013 The machine is ready for operation. Please have a look at my other listings.

Condition: new, Year of construction: 2026, KILIA Angle Grinder Wolf E130 – Frozen Meat Version General Description The KILIA Angle Grinder Wolf E130 in the frozen meat version is specifically designed for processing deep-frozen meat at temperatures down to approx. -25 °C. This machine stands out due to its robust construction, high performance, and hygienic stainless steel design, making it ideally suited for industrial use. Technical DataPlate diameter: 130 mmThroughput: up to approx. 1,200 – 2,700 kg/hHopper volume: approx. 160 – 200 litersMain screw: 2 speedsDrive power: approx. 11 kW – 15 kWVoltage: 400 V / 50 Hz FeaturesFrozen meat configuration up to -25 °CReinforced auger and auger housingFull stainless steel constructionElectrically interlocked safety grateIntegrated control cabinetOperation via push button Pjdpoywafzsfx Ahvepp

Condition: used, maximum load weight: 36,100 kg, overall weight: 49,000 kg, axle configuration: 2 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, total width: 2,550 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Psdpfx Ahsx Uvllsvepp Excerpt from the equipment. Full equipment details available upon request. Gooseneck: * Gooseneck in SNT design, optimized for loading bed length, approx. 3,750 mm, hydraulically liftable/lowerable and detachable * Technical fifth wheel load: 25,000 kg * Suitable for tractor units: 4 x 2, 6 x 2 and 6 x 4 Low bed: * Low bed designed as a telescopic vessel bridge in a low construction with front extension and mechanical locking * Dimensions (L x W) approx. 6,850 mm x 2,540 mm * Supply lines are protected in the extendable beams and automatically adjust to the respective low bed length Axles and suspension: * PENDLE-AXLE * All axles hydro-mechanically forced-steered * Hose rupture valve for axle compensation * Cylinders with automatic RESET function * Hydraulic cylinders with shut-off valves and pre-plugs for securing in raised position * Technical axle load: 12,000 kg each * Hydraulic axle compensation * Tires: 245/70 R 17.5 * Rear chassis with closed outer frame, checker plate cover and continuous prism-shaped excavator trough approx. 1,250/700 x 505 mm, open at the rear Braking system: * WABCO EBS-E braking system compliant with EU regulations, without connection cable to the tractor unit Painting: * Trailer color, RAL 3002 Carmine Red Included accessories: * Plug-in front wall made of steel, approx. 400 mm high * 3 kW electro-hydraulic unit for controlling hydraulic functions, except for hydraulic winches, without installation of supply connections on the tractor unit * Outer beam of the gooseneck with mounting holes for bolted lashing rings. First hole approx. 200 mm from the front, then every approx. 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear chamfer of the gooseneck (LC 6,000 daN) * 2-inch king pin * One locking position every approx. 500 mm on the extension * 1 pair of steel ramps with climbing bars and locking bolts to bridge the low bed hooks * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * Lashing rings with retaining spring every approx. 1,200 - 1,300 mm on the outside of the inner beams of the loading platform * Lashing rings with retaining spring every approx. 1,200 - 1,300 mm on the outside of the outer beams of the loading platform (LC 10,000 daN) on the top chord of the outer beams * Cutouts above the lashing rings * 1 hanging lashing ring each left and right on the outer rear crossmember (LC 10,000 daN) on the outer beams of the loading platform * Preparation for removable loading floor * Mounting strip at the front of the rear chassis to the low bed for loose approach ramps * Chassis with chamfered corners at the rear * Mounting strip for loose aluminum approach ramps at the end traverse of the vehicle * Remote steering from front and rear operable via wired remote control with push buttons, axle tracking control, without installation on the tractor unit * Mechanical bolt-lug coupling from the low bed to the chassis, for changing the loading platform or installing extension beams, with electro-pneumatic-hydraulic couplings * Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917) * 2 axle load gauges mounted on the left side Including special accessories: * On the gooseneck: 1 pair of plug-in aluminum side walls, approx. 400 mm high, anodized

Condition: good (used), Year of construction: 2018, Traverses X Y Z: 1270 x 508 x 635mm, Spindle nose to Table: 102 – 737mm, Table 1324 x 457mm, Spindle speed 7500 rpm, Spindle taper BT40, Spindle Motor 40Hp, HAAS Control, 20 Station ATC, Ppodsyt Hf Sspfx Ahvep Programmable Coolant nozzle, swarf auger, Low Volt light

Condition: used, Year of construction: 2008, operating hours: 5,834 h, 2008 | Delmag SR 25 BT / RH 18 on Sennebogen SR25 with ABI MDBA 3500 Soil Improvement Rig | Used Drill | 5834 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 220000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 65 inspection points 65 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: The machine is used for concrete pile drilling, soil improvement, and vibration tamping. The carrier vehicle is a Sennebogen SR25BT (built in 2008) with a Delmag RH18 drilling attachment (built in 2009). The drill table lift is 12.50m, total height is 19.91m. The outreach is 3.165 - 4.00m. It includes a winch for the feed with freewheel, auxiliary winch, and rear platform. The drill table is an SHT25, and the KDK rotary drilling head BT180-2 is not included. The machine is purely a soil improvement device, equipped with a MBDA 3500 ABI drill gearbox. It has a single auger. No Kelly bar is included. It features mast support cylinders and alignment automation. The hydraulic telescopic undercarriage has a width that adjusts from 3.0m to 4.40m. The CAT C9 engine was overhauled by CAT in 2015 at 3,304 operating hours. Drills and drill accessories are available separately. Also available is a mobile mixing plant, manufactured by MAT, which includes a mixing container (throughput capacity of 20m3/h), a conveyor screw, a mixing container (capacity 4,000l), and a plunger pump with remote control. The machine’s condition corresponds to its operating hours. During the inspection in 2023, the machine was running and functioning without any issues. As of October 2024, wear and tear have occurred on the valves, controls, and hydraulic hoses. It is not possible to operate the machine with two attachments simultaneously. The machine shows wear on bolts, bushings, and general usage marks (dents, scratches, etc.) consistent with its age, operating hours, and usage. The machine was not tested under load. It has been used with 55 and 80 paddles. After service and maintenance of the wear and tear, the machine will be ready for operation. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33244 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available Pjdpox Uyzqsfx Ahvspp ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Bunker with auger bag ripper control auger in good condition wear cookies available please contact via fue mobile number Psdpfjpith Tsx Ahvopp

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 06220420, functionality: fully functional, operating hours: 100 h, power: 7 kW (9.52 HP), input voltage: 380 V, input frequency: 50 Hz, cutting width (max.): 460 mm, control type: NC control, actuation type: hydraulic, rotational speed (max.): 80 rpm, rotational speed (min.): 20 rpm, total height: 1,900 mm, total length: 2,820 mm, total width: 2,200 mm, overall weight: 2,300 kg, Equipment: documentation/manual, Double-column structure, with a round-section main sliding column and a rectangular-section secondary column. CNC with touch-screen for programming the head lift, clamping, and piece feeding, inverter-controlled blade speed adjustment, and a feed repeater settable from 1 to 9 times. Blade descent controlled by a probe, workpiece Podpfx Aheyvh Nxjvjpp feed roller conveyor. Carbide blade guides and bearings, hydraulically locking clamps, auger chip conveyor, coolant system, lighting system, motorized blade cleaning brush, hydraulically adjustable belt tension. Operation and maintenance manual. With Extra 2m roller table 1pc (500mm width) NO CE mark, NO CE declaration of conformity

Condition: like new (used), Year of construction: 2021, As-new Vecoplan VTH 250x650 HxB shredder Power: 75 kW Cassel metal detector Ppjdpfeyvfl Ajx Ahvep Approx. 40 linear meters of vibratory troughs

Condition: new, functionality: fully functional, power: 7 kW (9.52 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 4 l/h, fuel tank capacity: 10 l, color: yellow, operation weight: 1,200 kg, lifting power: 300 kg/m, tire condition: 100 %, drive condition: 100 %, chain condition: 100 %, number of seats: 1, first registration: 06/2025, emission class: euro5, mast type: simplex, shovel volume: 0.025 m³, digging bucket width: 40 mm, brakes: other, suspension: other, Year of construction: 2025, number of cylinders: 1, Equipment: 4 in one shovel, adjustable boom, adjustable chassis, gripper hydraulics, hammer hydraulics, hydraulics, pallet forks, rubber tracks, standard shovel, tilting carriage, EKS12 mini excavator – a compact and reliable assistant for gardening, ground leveling, small-scale digging, foundation preparation, and property maintenance. Technical Data Weight: 1,200 kg Bucket volume: 0.025 m³ Dimensions: 2,880 × 950 × 2,000 mm Digging depth: 1,787 mm Fuel tank: 10 l Hydraulic flow: 16 l/min Engine: KOOP 192F, 7.6 kW (diesel) Metal hydraulic hoses Hydraulic oil cooler Options and Accessories More powerful 9.9 kW “Briggs & Stratton” petrol engine (+€225) Extras: swing arm (+€450), extendable undercarriage (+€675) Ppjdpexf Apiefx Ahvjp 14 different attachments: augers, grading buckets, narrow buckets, etc. Price and Terms €3,430 + VAT Warranty: 12 months or 1,500 engine hours

Condition: used, axle configuration: 3 axles, first registration: 11/2023, next inspection (TÜV): 11/2024, Year of construction: 2023, Equipment: ABS, Accident damage to the ramenfer floor 6x new tires with rims 40 foot tipper Own tipping unit, powered by the truck batteries Lift axle Water tank with soap dispenser Tool box Podpsvvfwzsfx Ahvjpp LED lights Possible for transporting 40 feet We have the following for rent: 20 foot 2 or 3 axles 20 foot tipping chassis 40 foot tipper chassis 40 foot chassis with rear extension 45 foot multi-chassis 18 to 26 m³ rear tipping troughs Are you interested? You can request our price list at any time without obligation. We sell tires and rims for trucks & trailers of brands: Fulda + Bridgestone + Petlas Sizes 315 / 55 ? 22.5 385 / 55 ? 22.5 385 / 65 ? 22.5

Condition: used, axle configuration: 2 axles, first registration: 06/2019, next inspection (TÜV): 06/2024, Equipment: ABS, Leaf spring drum brakes galvanized good condition 15x available Price 9900 Write to us with your requirements so that we can create an individual offer for you If not in stock, delivery time 7 to 9 weeks We sell tires and rims for trucks & trailers of brands: Fulda + Bridgestone + Petlas Sizes 315 / 55 ? 22.5 385 / 55 ? 22.5 385 / 65 ? 22.5 We build the following trailers Container chassis all types Low loader Tipping troughs Tank trailers Ppsdpfx Asvvfwuehvep Tarpaulin trailers Sillo trailers

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2019, Year of construction: 2019, Equipment: ABS, 2x lift axles 1x20 rear flush 2x20 Pjdsv Afrxjpfx Ahvepp 1x40 1x45 Water tank tool box LED lights Write to us with your requirements so that we can create an individual offer for you We sell tires and rims for trucks & trailers of the Brands: Fulda + Bridgestone + Petlas Sizes 315 / 55 ? 22.5 385 / 55 ? 22.5 385 / 65 ? 22.5 If not in stock, delivery time 6 to 9 weeks We build the following trailers Container chassis all types Low loader Tipping troughs Tank trailers Tarpaulin trailers Sillo trailers