Used Treatment for sale (772)

Year of construction: 2007, condition: good (used), Filtration unit consists of: water tank, gravel filter, pressure pump, activated carbon filter. System for insulating glass production line. Width: 2000 mm / water tank 2100 mm. Kdodpfx Abow I Hgrjner Height: 2200 mm / water tank 1700 mm. Depth: 600 mm / water tank 750 mm. Weight: approx. 250 kg / water tank: approx. 100 kg.

Condition: ready for operation (used), Two Artinox inclined clarifier/lamella clarifier systems made of stainless steel are offered for the continuous mechanical separation of dirt particles, sludge, or sediments from water or process liquids. 1) Artinox inclined clarifier/lamella clarifier, pipe connection: Ø 108mm, additional connection: Ø 168mm, main module dimensions: approx. 2400mm/1350mm/2360mm, hopper width bottom/top/center: approx. 1323mm/1896mm/1546mm, inclination: approx. 1.1°, function: solid-liquid separation by sedimentation, application: process water, wastewater, wash water, liquids containing settleable solids, separation principle: sedimentation with lamella packs/inclined plates, flow direction: horizontal, lamella packs: available, sedimentation hopper: available, equipped with multiple basin modules, lamella clarifier sections, sludge hopper, upper pipe distributor, connection nozzles and flanges, lifting lugs, frame, maintenance access. 2) Artinox inclined clarifier/lamella clarifier, smaller module dimensions: approx. 2300mm/1250mm/1371mm, hopper height/inclined bottom section: approx. 1050mm, inner/lower hopper dimension: approx. 775mm, lamella/sheet spacing: approx. 293mm, function: separation of settleable solids from liquids, design: rectangular clarification tank with hopper bottom, flow path: via inlet, clarification zone, overflow edge, sludge hopper: available, separate pre-collection tank: available on the side, discharge pipe/flange connection: available, maintenance ladder: available, wooden cover: available, equipped with main clarification tank, hopper bottom, side-mounted attachment tank, pipe connection, flange, maintenance ladder, upper cover. Inspection possible by appointment. Kjdpfx Abozhb Hfjnjdr

Year of construction: 2015, operating hours: 4 h, condition: used, functionality: fully functional, Equipment: CE marking, The equipment neutralizes hazardous gases specified in the requirements provided by the owner to secure emission of clean air. Kdsdpjzmqv Hofx Abnjr Sold as a complete system together with the chemical reactor, the electrolytic block and the waste water treatment system. The whole system is suitable for obtaining and cleaning of Cu, Au, Ag, Pd, Pt. The system includes 12 transformers for electrolytic baths (including 84 baths), complete pipe system, installed, can be tested and inspected. It contains neutralizer and automatic operation system. It was operating 2-4 hours during test run. The whole system is in new state.

Condition: used, Year of construction: 2020, operating hours: 35,933 h, functionality: fully functional, machine/vehicle number: 200202-0010, total length: 8,250 mm, total width: 2,600 mm, total height: 3,150 mm, type of input current: DC, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, emergency stop, type plate available, We are offering our outdoor drying system, model RG 50, from Heber. This weather-resistant, container-like drying unit is used for the technical drying of: Wood chips Grain Hay / Straw Bulk goods in general The system operates according to the principle of convective warm air drying: Heat source Kdedpfxjzba Nys Abnor Waste heat (e.g., from a CHP unit) Alternatively, oil/gas heating Air treatment, fan draws in ambient air, air is heated, drying process Warm air flows through the material, moisture is absorbed, exhaust air, moist air is discharged High energy efficiency through waste heat utilization, uniform drying, automated operation. Air flow rate: 55,000 m³/h Continuous operation (24/7 possible) Danfoss control system, manual is available. With 6 possible connections for drying containers. The system is still connected but is no longer in operation. Dismantling is the responsibility of the buyer! A telecrane and a low-bed trailer are required for transport! Inspection is possible by appointment!

Year of construction: 2019, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC HMI, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 6, This 6-axis CleanLASER cleanCELL 3220 CL600 was manufactured in 2019. It features a powerful 600 W Q-switched fiber laser, designed for automated laser cleaning and surface treatment of metal components. The system includes a 6-axis industrial robot and a fully aligned beam path for precision cleaning. If you are looking to get high-quality automated laser cleaning capabilities, consider the CleanLASER cleanCELL 3220 CL600 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Application: Automated Laser Cleaning / Surface Treatment of Metal Components • Laser Source: cleanLASER CL600 • Laser Type: Q-switched Fiber Laser • Average Laser Power: 600 W • Wavelength: 1064 nm • Laser Class: Class 4 (Laser Source) • Complete System Classification: Laser Class 1 • Laser Optics: STAMP 25 • Scanner Type: 2D Scanner • Working Scan Field: Approx. 65 × 65 mm • Objective Lens: f = 163 mm • Red Positioning Laser: Yes • Pulse Frequency: Variable • Beam Delivery: Fully Aligned Beam Path Kodpfx Abszuy Stenodr • External Fiber Length: Approx. 8 m • Door Interlock Connection: Yes • Remote Diagnostics: TCP/IP / USB • Fieldbus Interface: Profinet • Software: cleanSTUDIO • Telediagnostic Software: CLL Remote Diagnostics • Robot Type: 6-Axis Industrial Robot • Robot Programming: Teach Mode • Robot Gripper: Single Part Gripper • Loading System: Manual Loading • Conveyor System: Bosch T2 Carrier System • Buffer System: Multiple Workpiece Carriers • Unloading: Automatic Conveyor • Conveyor Length: Approx. 2 m • Workpiece Carrier: Not Included • Designed Workpiece Types: 2 • Machine Footprint (W × D × H): Approx. 2,035 × 2,200 × 2,215 mm • Machine Frame: Welded Steel Base Frame • Cell Construction: Aluminium Profiles • Work Table: Aluminium T-Slot Plate • Front Door: Folding Door • Electrical Cabinet: Integrated Double Cabinet • Cabinet Width: 1,200 mm • Cabinet Depth: 800 mm • Cooling Requirement: External Water Cooling (

Year of construction: 2009, condition: good (used), Section of tubular ultrafiltration able to treat about 36 mc/g of product Kedpfx Abstv Dx Eonjdr

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 828-043, total width: 1,800 mm, number of ink cartridges: 8, color channels: 7, number of print heads: 64, The Kornit Allegro is a powerful textile printing machine that offers outstanding print quality, high speed and versatility. It is particularly suitable for textile printing companies that want to produce first-class prints in large quantities (roll-to-roll) on a wide variety of fabrics. To date, it has been used primarily for cotton fabrics: jersey, French terry, cotton woven fabrics, canvas, sweat and viscose & modal qualities. For sale due to business downsizing. The textile printing machine is currently still in operation and can be viewed at any time by appointment. The following are available for sale with the machine: main and backup air compressors, dryer, unwinder & rewinder. So a complete production line. We are also selling all available spare parts, colors, etc. Kdjdsvmdw Iepfx Abnjr Technical specifications: Ink type: Kornit NeoPigment Intenso, water-based Ink capacity: 4 liters Colors: Cyan, magenta, yellow, black, red, green, gray Print heads: 64 x Spectra Polaris, recirculating - (7 color channels, 1 channel for pre-treatment) Print width up to 180 cm Print speed: Up to 200m²/ hour Print modes: Multiple print modes from 400-1200 dpi Recommended print mode: 600 x 600 dpi in 6 passes in interlaced mode Weight: 3500 kg Power supply: 110/220V, 60/50 Hz, 40A, 3Ph+N+GND 25kW Media transport: High-precision, adhesive belt conveyor system Fabric feed system: Axial unwinding device with adjustable fabric width and Tensioning mechanisms Max media thickness: 15 mm Max roll width 180 cm Max roll outer diameter: 40 cm Max roll weight: 50 kg Compressed air: 6-8 bar/ < 0.4 m³/min

Condition: used, Water Cooler with 8 axial fan. Pressure tested, ready to use. Located Locally in: Hungary (EU) Kdedszhgy Depfx Abnor

Condition: used, Year of construction: 2004, functionality: fully functional, pressure: 13 bar, Used steam generator, fully equipped in container. Type: DF 1500 Burner: Weißhaupt (oil or gas available, currently equipped with oil) Kdedpfx Aeyx U Igsbnsr New water treatment in 2024 Fully installed in container Net price Location: Poland Do not hesitate to contact us in case of questions.

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, Equipment: CE marking, Cleaning system that is the ideal solution for cleaning a wide range of parts with complex shapes; 2 units available. Kodpfx Abey D Rh Honjdr

Condition: like new (used), Year of construction: 2008, functionality: fully functional, EISENMANN Industrial Paint Complex - Complete Automotive-Grade Paint Line (New/Unused, 2008) Manufacturer: Eisenmann (Germany) - Tier-1 OEM supplier for Mercedes, MAN, Solaris, Volvo etc. Year of manufacture: 2008 Application: Full-cycle industrial painting of buses and large vehicle bodies. Components included: 1. Full Surface Preparation Line ● Pre-cleaning booth ● Degreasing, rinsing, and activation tanks ● Phosphating tank ● Rinsing tanks (8 m and 12 m) 2. Cathodic Electrocoating (KTL) ● Full-size KTL tank ● Post-KTL drying chamber 3. Sealant & Mastic Application ● Specialized PVC & underbody protection booth ● Sealant/mastic application booth 4. Primer Line (Primer 1 & Primer 2) Kdsdpfozi D T Dsx Abnsr ● Application booth ● Drying booth ● Cooling booth ● Workstations for filling, sanding, surface preparation 5. Final Paint Line ● Paint application booth ● Drying booth ● Cooling booth ● Minor defect correction booth ● Final inspection & preservation booth 6. Additional Systems ● Paint preparation room ● Wastewater treatment unit ● Transport systems ● Ventilation units ● Regenerative thermal oxidizer (RTO) Condition: new/unused, 0 working hours

Condition: excellent (used), Reverse osmosis inHigh-quality industrial reverse osmosis system in very good working condition, suitable for water treatment applications in manufacturing, food processing, pharmaceuticals, and general industry. The system is built on a compact skid and includes stainless steel piping, membrane housings, and a full control cabinet with operator interface. Key Features: Industrial RO (Reverse Osmosis) installation High-pressure Grundfos vertical pump Multiple membrane housings (stainless steel) Integrated PLC control panel with HMI display Pressure gauges, valves, and instrumentation installed Mounted on a heavy-duty steel frame (skid) Compact, ready for integration Condition: Very good overall condition Well maintained Fully functional (can be demonstrated if needed) Applications: Water purification Process water treatment Kedpfxezdykbo Abnodr Pre-treatment / filtration systems Industrial and production facilitiesstallation

Year of construction: 2019, condition: like new (used), MUT RWO 360/400-1150 Retort Heat Treatment Furnace - Like new: hardly used - Documentation available (both electronic and physical) - Pallet with spare parts included Kedpfx Ajiryyajbnsdr TECHNICAL DATA System type: RWO 360/400-1150 Furnace chamber temperature: ≤ 1150 °C for max. 1 hour Operating temperature: ≤ 1100 °C, ≤ 1050 °C in a vacuum Control stability: ± 2 K Temperature homogeneity: ± 6 K in the range of 600 °C to 1150 °C at the end of the stabilization period Control voltage: 230 VAC / 24 VDC Furnace working space: 360 x 400 mm Load: ≤ 50 kg Heating: Three-zone Pressure: ≤ 350 mbar Final vacuum pressure in the cold state: < 5 * 10-5 mbar in a clean, dry furnace Installation area: 900 x 1900 x 3000 mm Total system weight approx.: 1500 kg Sound pressure level: < 70 dB We assume no liability for the accuracy, completeness, and currency of the information provided.

Condition: good (used), Year of construction: 2023, functionality: fully functional, Invent air blower ITB150-15 Characteristics: Power 120 kW Voltage 500 V Air flow rate 51 m3/min Ksdpfx Absvyrxyenodr Pressure 40 – 150 kPa

Year of construction: 1996, condition: good (used), Offer: Drinking water treatment plant Water treatment plant 120 cubic meters/hour Year of manufacture: 1996 Fully functional Housed in a 6m container Control system and pumps included. Previously used to supply a container village. Kdedpohr D Hnjfx Abner

Year of construction: 2011, condition: not inspected (used), Complete gas treatment and catalytic oxidation system with heat recovery – built in 2011 On behalf of our client, we offer a high-quality industrial gas treatment and catalytic oxidation system for sale. The system was originally designed and built for the treatment of methane, hydrogen sulfide, and hydrocarbon-containing gas streams from a geothermal application. It is still fully assembled and can be inspected by appointment. The system was taken out of service in 2015 in functional condition and subsequently decommissioned professionally. All components in contact with the process medium were emptied and cleaned. Since the decommissioning, the system has neither been operated nor regularly maintained. A current functional test has not been carried out. Before recommissioning, a technical inspection and, if necessary, the modernization of individual components – in particular, the control and automation technology – are required. Technical data Manufacturer: KOPF Holding GmbH (complete system) Model: Customer-specific special system Year of construction: 2011 Process air/exhaust gas flow rate: up to 6,000 Nm³/h Methane conversion according to original design: 90% Burner output: 250 kW Waste heat utilization: up to approx. 370 kW thermal output System scope Vacuum degassing system Hydrogen sulfide absorber Vacuum compressor system Water treatment Catalytic oxidation system Catalytic reactor up to 750 °C Two-stage pre-filtration Stainless steel main heat exchanger Waste heat recovery heat exchanger Gas burner Frequency-controlled main fan Dräger gas measurement technology Kdodpfx Aezr T Dkjbnsr Siemens S7 control system with process visualization Extensive measuring, control and safety technology Documentation Extensive original documents are available for the system, including: Process description Layout drawings Piping and instrumentation diagrams (P&IDs) Isometrics Quotation and project documentation The completeness of Ex certificates and pressure vessel documentation is currently being checked. Condition System completely assembled Taken out of service in functional condition in 2015 Components in contact with the process medium emptied and cleaned Not operated since decommissioning Sale in current condition Inspection possible by appointment The system is particularly suitable for applications in gas treatment, methane oxidation, VOC/exhaust gas purification, biogas, landfill gas or comparable industrial processes. Sale is on behalf of the client. Technical data is provided to the best of our knowledge based on the available original documents. A current functional test has not been carried out. Errors, changes and prior sale are reserved.

Condition: used, Osmosis / water treatment system with Heyl testomat 2000 further details and scope of delivery see photo. Ksdpfxjtzxuys Abnedr Technical data see type plate. Item condition: used, untested condition: used, untested sample photos sample pictures A viewing in Rietberg is possible! If you have any further questions, please contact us by email. The sale takes place exclusively to commercial interested parties for commercial purposes and under exclusion of any warranty for material and legal defects! With your purchase you confirm that you are working commercially or as a freelancer. Otherwise you violate our terms and conditions!

Condition: good (used), Year of construction: 2023, functionality: fully functional, Invent air blower ITB150-15 Characteristics: Kedovyrxgopfx Abnsdr Power 120 kW Voltage 500 V Air flow rate 51 m3/min Pressure 40 – 150 kPa

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, total length: 3,000 mm, total width: 1,200 mm, total height: 1,400 mm, overall weight: 250 kg, TECHNICAL DETAILS Kjdezmr A Uspfx Abnsdr Number of nozzles: 13 Spray area: 1 × 3 m Number of tank connections: 4 MACHINE DETAILS Voltage supply: 1 × 230 V + N + PE Fuse rating: 16 A Connected load: 0.9 kVA Dimensions & Weight Machine dimensions: 3,000 × 1,200 × 1,400 mm Machine weight: 250 kg

Condition: like new (used), Year of construction: 2017, machine/vehicle number: HMD-G-80-1000, I have a nearly new, immediately available Abel piston diaphragm pump for sale, type HMD-G-80-1000, cast iron construction, manufactured in 2017, recently completely overhauled and repainted, maximum flow rate 70 m³/h, maximum pressure 15 bar, 30 kW engine, complete with new control cabinet, frequency converter, and pressure sensor. Ideally suited for long 1200 or 1500 mm chamber filter presses. Located in 58762 Altena, Germany. Kodpfeyxxmgox Abnjdr Just set it up, plug it in, and let it run…

Condition: good (used), Name: Replacement Rotor for Alfa Laval Manufacturer: Alfa Laval Type: ALDEC 506 Year built: - Inner diameter drum: 450 mm Interior drum length: 1.240 mm Material: Stainless steel Dimensions: L 1.930 x W 450 x H 450 mm Empty weight: 1.000 kg Kedpfx Abeza Dt Tonjdr Technical doc.: No Condition: Used-good Price: By request

Condition: ready for operation (used), Year of construction: 1998, Tank volume: 350l, permissible operating pressure: 6bar, permissible operating temperature: 90°C, motor manufacturer: Röchling, motor type: A3, fluid grease quantity: 1kg. Ksdpet R Trxsfx Abnsdr

Condition: good (used), Ultrafilter ultraaqua autoclean 0016 AC Donaldson Ultrafilter ultrafiltration system for compressed air compressor condensate Oil/water separator for compressed air condensate. ● Treatment plant for separating compressed air condensate and condensates with difficult separation properties (e.g. stable emulsions) by means of cross-flow filtration ● Physical separation principle guarantees residual oil content of < 5 mg/l in water Intelligent control concept with programmable control for safe analog operation, incl. plain text display by means of text display, Fault monitoring via alarm messages with potential-free contacts and optional external network connection Optimized cleaning by comparison of input/output extends cleaning intervals and saves operating costs ● Thermally and chemically highly resistant ceramic membrane with long service life ● Antifreeze protection with integrated heating ● High-quality, corrosion-resistant materials for vessels, piping, pumps, seals, and valves Manufacturer: Donaldson Ultrafilter System type: ultraaqua autoclean 0016 AC Electrical data: 3 x 380 V, 50 Hz, 2.6 kW Compressed air: pmin: 5,5 bar, pmax: 8,5 bar, Pneurop 4 Water: pmax: 5 bar Kdsdpfxsidx Uio Abner Membrane: pHmin: 1, pHmax: 11, tmin: 5°C, tmax: 70°C Financing through our bank is also possible. komplett-konzept.leasingo.de You can find additional filtration systems in other sizes—new and used—in our shop! International shipping costs upon request!

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 70 bar, total height: 1,600 mm, total width: 800 mm, total length: 1,200 mm, temperature: 40 °C, operating pressure: 70 bar, noise level: 80 dB, Equipment: documentation/manual, rotational speed infinitely variable, RO 510-DT2-15S – Compact Seawater Reverse Osmosis System, approx. 15,000 L/day Potable Water Compact, fully automated reverse osmosis system for the production of hygienic drinking and process water from natural seawater. Ideal for maritime applications, island supply, hotels, as well as small-scale industrial and utility operations. Technical Specifications Type: RO 510-DT2-15S Process: Reverse osmosis with Disc-Tube (DT) technology Permeate Output: Approx. 15,000 L/day (15 m³/day, depending on operating conditions) Feed Water: Seawater with high conductivity, approx. 55,000 µS/cm (high salinity) Permeate Quality: Drinking water, approx. 500 mg/L residual minerals (reference value) Recovery Rate: Approx. 30% (typical operating range) at 55,000 µS/cm conductivity Design Temperature: Approx. 25°C (Operating range: approx. −2 to 35°C) Process Technology & Configuration DT module with open feed channel – highly fouling-tolerant and fully cleanable Mechanical pre-filtration (high-performance filter + 10 µm cartridge filter) Chemical pre-treatment of feed water (acid dosing) generally not required Integrated rinsing and CIP (clean-in-place) function, PLC controlled Skid-mounted on stainless steel frame (AISI 316) High-pressure lines in stainless steel, low-pressure section in seawater-resistant plastic Pumped seawater components made from corrosion-resistant materials Operating & Energy Data Feed Water Flow: Approx. 1,000 L/h (reference value) RO Module Operating Pressure: High pressure range, designed for seawater desalination Power supply: 230 V, 50 Hz, single phase Connected load: Approx. 6 kW Control, Monitoring & Safety Local operator panel with integrated PLC control Monitoring of pressures, flows, conductivity, and operating hours Automatic shutdown in case of: - Insufficient feed pressure - Exceeding permissible operating pressure - Overpressure in permeate/concentrate lines - Exceeding defined conductivity limits (with automatic redirection to drain) Automatic “Stop & Rinse” function: Permeate flushes all seawater-contacted components on shutdown, reducing fouling during system standby Dimensions & Weight (Skid) L × W × H: Approx. 1,190 × 705 × 1,500 mm Weight: Approx. 530 kg (dry), approx. 605 kg (operating) Typical Applications Vessels, offshore platforms, ports Island and coastal supply Ksdpow Uf Ihefx Abnjdr Hotels, resorts, small industrial and utility operations Backup or peak load system for existing potable water production Additional technical documentation, photos, and information on scope of supply, pricing, and availability are available on request.

Condition: ready for operation (used), Two like-new and partly originally packaged large-format vacuum angle valves Leybold are available. Deflection: 90°, nominal diameter: 800mm, max. operating pressure: 7bar. Documentation available. An on-site inspection is possible. Kedsyv H E Espfx Abnedr