Used Traub Tnd 300 for sale (108)

Year of construction: 2023, condition: ready for operation (used), An unused Traub CNC twin-spindle turning and milling center with peripheral equipment is available. Spindle types 1/2: D76/D76, max. turning length: 900mm, max. workpiece diameter: 76mm, number of tool carriers: 3, control system: Traub TX8i-s V8. Main spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Counter spindle bore: 76mm, taper size: 6, hollow clamping cylinder: D76/20, indexing: 2.5°, clamping pressure range: 8bar-75bar. Upper tool carrier: axes: X/Y/Z, stations: 12. Lower left tool carrier: axes: X/Y/Z, stations: 12. Lower right tool carrier: axes: X/Y/Z, stations: 12. Including Isi Elbaron RON4DHEC mist extraction and filtration system, custom-built circulation conveyor, Bürener hinged belt chip conveyor, Bürener Eco-Fluid coolant system (600l), cooling unit, coolant chiller, Traub WH workpiece handling system, various grippers and gripper pairs, IoT, and management and monitoring software. This machine was never put into operation and is therefore in as-new condition. Documentation available. An on-site inspection is possible. Godpfxezkvkqs Ak Ueug

Condition: good (used), Year of construction: 1999, operating hours: 110,000 h, functionality: fully functional, spindle bore: 42 mm, Description follows Gsdpfx Ajx A Ha Hek Usug

Condition: good (used), Year of construction: 2008, functionality: fully functional, Traub Stamag DNH42/3000, year of manufacture 2008, DNH42, bar feeder, loading magazine, loader. Godpfx Akezp Ec Hs Usug

Condition: good (used), Year of construction: 2007, CNC Long Turning Lathe Manufacturer: Traub Machine Model: TNL 12 Control System: Traub Year of Manufacture: 2007 TECHNICAL DATA Headstock - Max. bar diameter (mm) 12.7 - Quality of round material (DIN 671) (mm) Ø Xh9 - Max. speed (rpm) 12,000 Guedpfxszr Uvho Ak Ueg Max. turning length / headstock travel - with fixed guide bushing (mm) 130 - with rotating guide bushing (mm) 80 - with programmable guide bushing (mm) 80 C-axis resolution (degrees) 0.001 Rapid traverse Z1 (m/min) 30 Tool turret 1 - Slide travel X1 (mm) 35 - Slide travel Y1 (mm) 38 (-10 +28) - Rapid traverse X1 / Y1 (m/min) 15 - Chip-to-chip time (s) 0.3 Tool turret 2 - Slide travel X2 (mm) 35 - Slide travel Z2 (mm) 50 - Rapid traverse X2/Z2 (m/min) 15 - Chip-to-chip time (s) 0.3 Tool drive for tool turret 1 and 2 - Max. speed (rpm) 8,000 - Tools max. (number) 2xG - Clamping diameter for drilling tools (mm) 0.5-7 Counter spindle / front tool holder - Max. bar diameter (mm) 12.7 - Max. longitudinal travel 23, 24 / Xg (mm) 140 / 228 - Rapid traverse 23, 24 / X3 (m/min) 30 - Tool holders (number) 4 - Max. speed (rpm) 12,000 - C-axis resolution (GSP) (degrees) 0.001 Rear tool holder, driven / fixed - Z-axis travel with work spindle (mm) 80 - Tool holder diameter (mm) 20 - Tool holders (number) 3 Rear tool holder (X4 axis) - X4-axis travel (mm) 39 - Rapid traverse speed (m/min) 15 - Tool holder diameter (mm) 28 - Tool holders (number) 4 Tool drive for rear tool holder (with X4 axis) - Max. speed (rpm) 10,000 - Driven tools max. (number) 4 - Clamping diameter for drilling tools - Driven (mm) 0.5 - 7 - Non-driven (mm) 0.5 - 10 Coolant system - Pump pressure, single-stage (bar) 3 - Tank capacity (l) 180 - Delivery rate (l/min) 40 EQUIPMENT FEATURES - Chip conveyor - Bar loader FMB Minimag 18 - High-pressure system - Fire extinguishing system Subject to change and errors in technical data and specifications.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Traub CNC turning machine TNC65DGY, TX8I, year of manufacture 2005, serial number 113* Y-axis on S1, V-axis, 2x C-axis, 2 rotating tool drives, 2 turrets VDI30, Hainbuch BZI65 on main and counter spindle, parts gripper, without loading magazine. Gusdpszfkbaofx Ak Uog Very well maintained, in good condition, maintenance performed. Machine geometry has been checked and corrected/adjusted. Machines can be inspected while powered up – or a video is available. Approximately 4 weeks after order. Warranty of 6 months on main components as follows: Spindle bearing, ball screws, linear guides, clamping cylinders. The warranty expressly applies only to the replacement parts, not to downtime or labor time, or travel time. The warranty expressly does not apply to other parts than those mentioned above, e.g. wear parts, electrical components, electronics, hydraulics, etc.

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Guodpezxihfefx Ak Uog

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Guedozxihrjpfx Ak Usg

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Guodpfszxigusx Ak Usg

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Guedpozxig Ijfx Ak Ueg

Condition: ready for operation (used), Year of construction: 1994, TRAUB TNS 65 D / 5-axis CNC turning-milling center TX8D Guedpfx Aozpf I Ask Ueg -TX 8D control system -COMPLETE TECHNICAL DATA – SEE PHOTOS -Year of manufacture: 1994 -Hydrobar tool magazine -Tailstock -Various powered tool holders -Three-jaw chuck -Tool holder -Complete documentation Errors and omissions excepted.

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Godpfx Aezxuc Uok Uoug

Condition: used, Swiss-type cnc lathe TRAUB TNL 12/7 Gjdpfxezxii Ao Ak Usug

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Guedjzxihxjpfx Ak Uog

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Gjdozxigzopfx Ak Uoug

Year of construction: 2006, condition: used, Control voltage: 24V DC, rated current: 85A, connected load: 39kVA, rated power: 49kW, control-on operating hours: 32,779h, automatic operation 1: 5,040h, automatic operation 2 operating hours: 1,844h, production time: 33,731h, length: 3231mm, width: 2076mm, height: 1917mm, weight: 4.8t, with documentation, chip conveyor and FMB turbo 8-80 bar feeder. An on-site inspection is possible. Godpszuzzvefx Ak Ueug

Condition: ready for operation (used), Traub 700 734 VEMEM/I interface board, used, in good condition, 100% functional, scope of delivery as per photos. Guodjz Ada Djpfx Ak Ujg

Condition: good (used), Year of construction: 2009, functionality: fully functional, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turrets: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm Gjdjyw H Szopfx Ak Uoug - Max. bar diameter: 65 mm - Max. diameter of main spindle chuck: 175 mm - Minimum C-axis resolution: 0.001 degrees SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001 degrees - Travel: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle since 04/26 ACCESSORIES - 3-color status signal lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts extraction - Parts belt conveyor

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Guodezxih Eepfx Ak Usg

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Gujdpozxiicofx Ak Usg

Condition: used, Swiss-type cnc lathe TRAUB TNL 12/7 Gjdpozxii Nsfx Ak Ueug

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Guedpszxig Uofx Ak Usg

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Guodpozxihlefx Ak Uog

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Gsdpfx Akozxignj Uoug

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Gsdpfxszxiiie Ak Uoug

Condition: used, Swiss-type cnc lathe TRAUB TNL 12K Gujdpfezxiivex Ak Ueg