Used Trapezoidal Sheet for sale (8,851)

Condition: new, Year of construction: 2025, Equipment: CE marking, Guillotine shear with pneumatic sheet holding device Cutting length: 3100 mm Sheet thickness MS (450 N/mm²): 6 mm Sheet thickness SS (700 N/mm²): 4 mm Strokes per minute: 15 1/min Cutting angle: 1º 30’ Number of hold-downs: 16 pcs. Maximum hold-down force: 14 t Backgauge: 1000 mm Backgauge speed: 200 mm/sec Motor power: 15 kW Oil tank capacity: 200 l Throat depth: 50 mm Support arms: 2 pcs. Support arm with side gauge Table height: 865 mm Table width: 500 mm Table length: 3515 mm Machine length: 4110 mm Machine width: 2200 mm Total width: 3700 mm Machine height: 2100 mm Weight: 7650 kg Heavy-duty steel construction St 44 & stress-relieved, annealed machine frame D-Touch 7 touchscreen CNC controller, user-friendly centralized cutting angle adjustment Nsdpfx Aed Ewubjf Ejdc Ball screw, 1000 mm & automatic swing-up Support balls in the table for improved material handling Side stop with scale & T-slot and tilting stop Support arms with T-slot and tilting stop Cutting line illumination & 1 m foldable finger guard High-performance hydraulic and electronic components Automatic pressure adjustment Swiveling backgauge Cutting line illumination Foot pedal CE standard for EU Machines can be inspected and demonstrated at our demo center in Staufenberg by appointment at any time. Further machines are available ready for demonstration at our facility in Staufenberg. We are happy to provide further information upon request.

Condition: good (used), Year of construction: 1998, In good technical condition. Cutting length: 3,000 mm, max. capacity: 6 mm. Year of manufacture: 1998, weight: 5,500 kg, including new double-sided blades. Nedpfx Ajxd Tcdef Esdc

Condition: good (used), Trapezoidal taps Diameter 40 mm Njdpfxsdx Uy Ie Af Esdc Pitch 1/5 inch

Condition: used, Year of construction: 2009, operating hours: 60,000 h, functionality: fully functional, type of input current: three-phase, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 2 mm, total width: 3,990 mm, The machine is well maintained Nsdexiv Tpjpfx Af Ejdc

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity per storage section: 3,000 kg, total length: 3,280 mm, total height: 2,870 mm, total width: 3,300 mm, shelf height: 80 mm, warranty duration: 12 months, shelf length: 1,540 mm, load capacity: 30,000 kg, carrying capacity per cantilever arm: 3,000 kg, overall weight: 2,500 kg, load per truss pair (max.): 3,000 kg, frame width: 3,300 mm, number of shelf rows: 10, Sheet metal rack / high-capacity steel storage support system Main features: - Rack doors are equipped with safety mechanisms during shelf extension; the shelf is locked in both closed and extended positions Njdexhd Tbspfx Af Ejdc - Frame and door guides are linked, enabling the shelf to roll out on rollers - The shelf can be extended to 100% of its depth The rack specification provides exact values; it is possible to adapt the product to the individual requirements of the customer.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Double-lane portion slicer MARELEC PORTIO 1 DAP Njdpfx Afexg Saao Eodc Manufacturer: MARELEC Food Technologies Model: PORTIO 1 DAP Serial number: 8115L Year of manufacture: 2023 Power supply: 380 V Number of belts and blades: 2 Belt width: 229 mm Linear speed: up to 60 cm/s Cutting speed: up to 25 cuts/s Cutting angle: 0/15/30/45/50 degrees Max throughput: up to 200 pcs/h Weight: approx. 1,800 kg External dimensions: Length – 3,655 mm Width – 1,922 mm Height – 1,663 mm Equipment: Conveyor in 3 sections, disassembled – with plastic belt The MARELEC double-lane portion slicer, model PORTIO 1 DAP, with double conveyor belt, cutting speed up to 25 cuts per second, and five cutting angles, ensures maximum efficiency for slicing poultry products and smaller fish fillets up to 210 mm width. The device is designed for fresh products such as poultry fillets, red meat cuts, poultry products, whole fish, fish fillets, and ready-to-eat products. Intelligent portion slicing – pre-programmable product calibration enables quick product size changes within seconds, while the control panel allows device adjustments during operation, significantly improving performance. These machines are engineered to meet the most stringent hygiene requirements. The CIP system and full machine opening enable fast washing cycles for both the belt and knife guides. The removable modular belt is also easy to clean. The system can be configured with various product clamping systems and blade types best suited to the product. The product is fed onto the infeed belt. A 3D laser scanner calculates the product’s volume. The program menu allows selection of pre-set weights and portion shapes. The computer then determines the optimal cutting position. The hang weight feature can optimize accuracy when product characteristics change. The device can be fully opened for easy cleaning. Belts can be removed for separate cleaning.

Year of construction: 1998, condition: used, ILLIG UA 225 ED thermoforming machine Sheet forming machine Thermoforming machine / Sheet forming machine Make : ILLIG Type : UA 225 ED Nedpfexg I Dujx Af Ejdc Year of manufacture : 1998 Operating hours : 40.191 Working area : 2.200 x 1.200 mm Condition : The machine is still under power and was in use until June 2024. The sale is due to insolvency.

Condition: new, material width 1015 mm material thickness 1 mm speed von Hand Ndedpfeupxdksx Af Ejc weight 240 Kg dimensions 1420 x 600 x 750 m

Condition: good (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: P-II-43/1380, The machine is operational, loading is included in the price, you are welcome. Njdpfx Afjxgngco Ejdc

Condition: excellent (used), CATALOGUE NUMBER 6933 TECHNICAL DATA - loading fields 1 Ndodpok Uxwwsfx Af Eoc - from the front manually adjustable clamping beams 6 pcs - from the top pneumatic pressure beams 4 pcs - length of each pressure beam 795 mm - from the side pneumatic clamps 2 pcs - max length of glued elements 3300 mm - max height of glued elements 1300 mm - max thickness of glued elements 170 mm - dimensions length/width/height 4200x800x1960 mm - weight 820 kg ADVANTAGES - Polish production - mobile - unpainted - used press, very good condition Net price: PLN 23900 Net price: EUR 5620 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: used, functionality: fully functional, Year of construction: 2018, machine/vehicle number: 74236-10, control type: CNC control, degree of automation: automatic, controller manufacturer: Prolink, working width: 3,100 mm, throat depth: 195 mm, bending angle (max.): 180 °, sheet thickness steel (max.): 3 mm, sheet thickness stainless steel (max.): 2 mm, sheet thickness aluminum (max.): 4 mm, overall weight: 4,700 kg, Equipment: CE marking, centralized greasing system, emergency stop, foot remote control, Good condition metal folding machine CIDAN FORMA. It is a versatile solution that meets both series and one-off production needs. Fast, easy to operate, and user-friendly. Simple programming system – PROLINK with touchscreen control provides convenient programming. Quick tool change time allows setup time to be minimized. The FORMA model is equipped with a combined upper beam – always allowing the use of two different tool types: straight rail or segmented tools. Multifold version (where the upper clamping, lower, and folding beams all have segmented tools). Backgauge The FORMA backgauge is a rigid construction, driven by servomotor, ballscrew, and linear guides to ensure maximum precision and repeatability. The machine is connected and can be seen and tested live. Specifications: Manufacturer: Cidan Model: Forma Year of manufacture: 2018 Working length: 3100 mm Max. bending thickness: Steel (max. sheet thickness): 3.0 mm Stainless steel (max. sheet thickness): 1.9 mm Aluminum (max. sheet thickness): 4.5 mm Ndodpfx Afexgdpts Eoc Upper beam opening height: 195 mm Motor power: 7.9 kW Weight: ~4.7 t Equipment and Features: Control system: Prolink with touchscreen CNC controlled backgauge: U-shape 3–3000 mm Automatic folding beam adjustment Adjustable folding speed Crowning system Two foot pedals Tool storage cart Tooling: Segmented upper tools, height – 125 mm Segmented folding beam tools: 30 mm Tooling length: 2900 mm

Year of construction: 2014, condition: excellent (used), Holzmann TBS 1320 sheet metal shears Holzmann TBS 1320 sheet metal shears Features: - Limiter for precise material setting up to 700mm with a scale, Nodpfogzzwnjx Af Eodc -possibility to set the front stop up to 880mm, - rectangular stop for setting the material on both sides of the working table, -automatic clamp for holding the sheet metal, - easy and friendly work - foot operation. Max. cutting length 1320 mm Max. sheet thickness 1 mm Working height 800 mm Weight 545 kg

Condition: refurbished (used), Year of construction: 2009, used Timesavers model 22-Series-900-WB with wet extraction Technical data: Year of manufacture: 2009 Machine is completely overhauled – New conveyor belt – New rotary brush Ndedpfx Ajxc H Rfof Eec Working width: 900 mm Abrasive belt dimensions (W x L): 1900 x 930 mm Machine built in accordance with CE Main switch, emergency stops Disc brake Electrical specifications: Power: 28.05 kW Electrical connections: 3-phase Voltage: 400 V Current: 55 A Frequency: 50 Hz Unit 1: Contact roller unit, Ø150 mm Contact roller 45° Shore Fine adjustment Dial gauge on contact roller Rotational alignment with feed Main motor 7.5 / 15 kW Oscillation Unit 2: Brush unit Brush Ø200 mm “Clean-Strip” 17CS02 polish no. 6 2 directions of rotation Dial gauge Fine adjustment Oscillation Motor 11 kW

Year of construction: 1966, operating hours: 10,000 h, condition: excellent (used), functionality: fully functional, outer diameter: 420 mm, machine/vehicle number: 58256, Nebiolo Saturnia in very good condition. From first owner, at first used as a letterpress in the upcoming market with offset in the 70's. The company always produced with it's offset to maxima 50/70 size. Situated as a local printer in a village, the Nebiolo was sometimes used for rilling, slitting, scoring some offset jobs. very good machine, low noise, excellent condition of al mechanical parts. Airpump for feeder and delivery is for a later make = Becker dry-pump 100m3 with low noise. All parts necessary for the machine come with the machine, even as the original operational book and spare-parts book. The cylinder has a 6 cm larger diameter than a KBA Condor and it weights 800kgs, only 200 kgs less of that of a heidelberg SBB/SBD. The delivery is different and for carton better that that of its competitors: a triple drum delivery, turning the front side up again on the belts which transport it to the pile. Best is to replace the individual belts for one large belt and make some extra attention for laying the sheets down when coming from the belt with better air facilities. Of course we can arrange that for you either. Then you have a faster, very easy to operate and maintain with better productivity and at least the same durability (with lower noise-level due to less moving parts) than an heidelberg SBD with approx the same size for more than double the money. Really a nice product from Nebiolo even as it big brother Urania. They have pull-lays but can easily turn over to push side lays. Some specs: Nsdpfetyyvwjx Af Esdc Max paper size 650 x 950 mm Min paper size 300 x 420 mm Speed 1500 - 4000 imp/hour Feeder pile height 550 mm Delivery pile height 650 mm Impression force approx. 35000 N (not adjustable in lighter or heavier, only one value) Bearer height 24,85 mm; machines needs "normal - Bobst standard" 23,80 diecut forms/lines with a hardened steel plate under the form so that small compensations could be made with thin band and paper under this hardened plate. This is the only and best method. A 45 to 47 HRC plate will be delivered with the machine, even as a new cylinder jacket. Feeder and delivery use an additional extern pump, Becker, 100m3, 2kW Size of the machine (approx, with steps) L x W x H = 330 x 220 x 190 cm Weight net 4,800 kgs

Condition: new, neu ca. 12 Wochen ab Auftrags Italien 145200 € 2744.28 € 1350 mm 0,4 - 120 mm 1370 x 2200 mm 6000 m³/h 150 mm 6 bar 4200 mm 2300 mm Nedjwir Daepfx Af Ejdc 2350 mm 4200 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP * Machine made of stress-free welded steel construction for stable and rigid structure * Work table with motorised height adjustment via 4 synchronised spindles. * Independent drive motors for each work group. * Hoods for extraction inside the machine, one per station. Touch screen for: * Automatic star-delta connection of the main motors * Digital display for sheet thickness with decimal point tolerance * Material thickness adjustment (+/- 0.1 mm) * Machine condition monitoring with alarm messages FEEDING SYSTEM * Robust steel structure, wear-resistant surface. * Vacuum conveyor belt on request * The table raises and lowers from 780 mm to a maximum height of 950 mm above the floor. The power of the motor for height adjustment of the table is 0.25 kW. * Maximum permissible weight on the table: 140 kg. * Variable feed speed via frequency converter 0,4 to 4,5 m/min, Option 0,2 to 2,0 m/min or 0,6 bis 6,0 m/min. * Rubber conveyor belt, oil and temperature resistant. * Lateral guides to prevent the belt from lifting off. * Rubber pressure rollers in front and behind each station, oil and temperature resistant. * Automatic centring device for the conveyor belt * Automatic servo cooled motor * Speed motor on the main touch screen 1 TH R GROUP DEBURRING WITH ABRASIVE BELT * Rectified and balanced contact roller with 180 mm diameter. Coating of oil and heat resistant nitrile rubber. Standard roller hardness 55° shores. Mounted on an eccentric shaft that allows to control the working position and compensate the abrasive belt wear, with a range of 8 mm. This system is controlled by a pneumatic cylinder that allows the automatic insertion of the group into the work and, in case of emergency and/or machine stop, the immediate removal of the sanding belt from the working point. It is possible to insert sanding belts and/or Scotch Brite. * Pneumatic on-off switch. * Roller adjustment up-down "grain" stroke 10 mm * Variable speed motor 11 kW with automatic braking in case of emergency. * Rotation speed in feed direction 4 - 18 m/s. * Width and duration of the oscillation setting. * Pneumatic tensioning system for the abrasive belt. * Sanding belt centring system, with electronic photocell, Oscillation adjustment in width and time. 2ND GROUP ROTATING BRUSH UNIT * 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. * Each brush has a diameter of 350 mm and a length of 530 mm. * Motorised raising and lowering of the group to regulate the pressure of the deburring. * Variable speed motor 1,5 kW. * Variable speed group electronic inverter 6 - 12 U/min. * Brush motor with variable speed, power 6 kW (4 x 1,5 kW). From 300 to 900 U/min. * Speed programmable control and display on the electronic touch screen. CONTROL OF THE THICKNESS AND THE BRUSHES * Motorised table lifting with fine adjustment via 4 precision screws with ball bearings * Maximum operating pressure 120 mm * Pressure motor power kW 0,75 * Pressure adjustment via touchscreen CONVEYOR BELT CLEANING Brush system in nylon canvas for cleaning the conveyor belt (length 1350, Ø =150 mm), located at the back of the machine under th...

Condition: used, - Documentation available: No - Model: Hydraulic - Max. working width: 6000mm - Back gauge: 1 - Max. sheet thickness: 12mm - Control: Conventional Financial information VAT: The price shown is exclusive of VAT Ndjdpfx Afownh N Ao Eec VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper, profile steel tongs, plate gripper, lifting claw, lifting clamp -Manufacturer: ip, safety lifting clamp type IPU10/J with pivoting support ring -Clamping range: 50-100 mm -Load capacity: 9 t -Quantity: 1 piece available -Dimensions: 380/110/H460 mm Nedekm Rm Aepfx Af Ejdc -Weight: 35 kg

Condition: used, functionality: fully functional, Year of construction: 1976, control type: manual, degree of automation: automatic, actuation type: electric, working width: 200 mm, sheet thickness (max.): 3 mm, power: 2.5 kW (3.40 HP), input voltage: 380 V, input frequency: 50 Hz, overall weight: 300 kg, total length: 2,400 mm, total width: 800 mm, total height: 1,500 mm, Circular shears for cutting sheet metal in coils - Otto Kaiser - 1 cut Njdpsxf Trhefx Af Ejdc Ideal for cutting rolls into narrow strips Cutting sheet metal up to 1.5 mm thick (steel ideally up to 1.2 mm) Width up to 200 mm Unwinding and winding of coils Speed ​​regulation via reducer The machine is installed in the factory and can be seen working. In working condition. Little used

Condition: good (used), Number of straightening rolls 5 Ndedpsgvl U Rjfx Af Eoc sheet width 430 mm Sheet thickness 1 mm Top roll diameter 2 Top rolls - Ø 60 mm Bottom rolls diameter 3 Bottom rolls - Ø 60 mm

Condition: good (used), Technical data of the shim: Manufacturer: Bito (M) Included in delivery: 01x shim, used Material color: sendzimir galvanized total width: approx. 150 mm Nsdpfxji Hkngo Af Ejdc total depth: approx. 105 mm material thickness: approx. 4,00 mm hole distance (center - center hole): approx. 120 mm Weight: approx. 0.46 kg | pcs.

Condition: used, Year of construction: 2023, gebraucht 2023 5542 prompt, Zwischenverkauf v Italien 11600 € 1 1300 mm 150 mm 150 mm 250x350 mm 945 mm 0.75 kW 1400 mm 1000 mm 1450 mm 300 kg Demo machine / mint condition Net price (price for new machine € 13.600,00) Easy T is a manually operated deburring machine suitable for various metalworking processes such as grinding, deburring, edge rounding and polishing for various types of materials - stainless steel, steel, copper, brass and aluminum. The grinding head with two rotating tools (grinding wheel or brush) is mounted on a swivel arm. The Easy T is equipped with a freely adjustable speed and a vacuum system, so that workpieces are fixed on the table. It is a cost effective and effective solution for conventional grinding and deburring. All edges of the workpiece are machined from all angles and directions. The grinding head can be swiveled through 180 ° and enables a quick change of the grinding tool. Properties: Ndodpjwiryhefx Af Ejc * The grinding pressure is applied manually. * When deburring from above, the workpieces are pressed onto the high-grip lid. * Fast processing, low costs The brush ensures the rounding of the edges of the workpiece. The standard brushes have a diameter of 150 mm. To deburr the product, use a support pad with a grinding disc. Depending on the height and hardness of the burr, you can set the grinding wheel at a slight angle to allow more pressure on the burr.

Condition: good (used), Technical data of the shim: Manufacturer: Polypal Ndedpoi Hkm Usfx Af Esc Included in delivery: 01x shim, used Total width: approx. 130 mm total depth: approx. 85 mm material thickness: approx. 1,50 mm Drill hole Ø: approx. 15 mm number of drill holes: 2 pcs. Weight: approx. 0.12 kg | pcs.

Condition: new, neu ca. 12 Wochen ab Auftrags Italien 57800 € 1092.42 € 1 650 mm 0,5 - 170 mm 670 x 2200 mm 4000 m³/h 120 mm 6 bar 78 (+/-2) dB 22 kW 2600 mm 1350 mm 2100 mm 1125 kg WITH 2 WORKING STATIONS: 1 X GRINDING BELT UND 1 X BRUSH UNIT ON TOP Machine made of stress-free welded steel construction for stable and rigid structure. Work table with motorised height adjustment via 4 synchronised spindles. Independent drive motors for each work group. Hoods for extraction inside the machine, one per station. Touch screen for -Automatic star-delta connection of the main motors - Analogue ammeter for each group - Digital display for sheet thickness with decimal point tolerance - Material thickness adjustment (+/- 0.1 mm) - Machine condition monitoring with alarm messages FEEDING SYSTEM Robust steel structure, wear-resistant surface. Vacuum conveyor belt on request Variable feed speed via frequency converter 0.6 to 6.5 m/min. Rubber conveyor belt, oil and temperature resistant Automatic conveyor belt centring Lateral guides to prevent the belt from lifting off. Rubber pressure rollers in front and behind each station, oil and temperature resistant Idle rollers at the front and rear table INCL. OPTIONALTAMPICO BRUSH SYSTEM FOR CONVEYOR BELT CLEANING Ø 150 MM 1 . WORKING GROUP - R Balanced contact roller Anti-oil and anti-heat Nitrile rubber coating Adjustable via eccentric shaft for working position and compensation of abrasive belt wear Pneumatic cylinder for automatic feed to working position and for lifting in case of emergency stop. Abrasive belts and/or Scotch Brite can be used. Motorised adjustment and electronic control of contact roll height. Variable speed motor with automatic brake in case of emergency. Pneumatic tensioning system for the abrasive belt. Sanding belt centring system, with electronic photocell. Oscillation adjustment in width and time. Diameter of contact roller mm 125 Hardness of the rubber wheels Shore 55 Stroke of the contact roller adjustment up-down "Grain adjustment mm 8 Positioning accuracy of the contact roller adjustment mm +/- 0,02 Positioning speed of the contact roller adjustment m/sek 10 Grinding belt speed m/sek 3-18 Motor power kW 7,5 2. WORKING GROUP - X 2 rows of vertical brushes, 4 rotating clockwise and 4 counterclockwise. Transverse movement of the entire group (oscillating) Quick change holder for brushes Brush diameter mm 115 Number of brushes No 8 Oscillation stroke mm 15 Rotation motor power kW 2,2 Revs 1/min 1000 Oscillation motor power kW 0,4 Grinding brush speed m/sec 10,0 Optional accessories: B Group - External barrel brush Ø 150 mm with Scotch Brite Brush € 5150,00 with Wire Brush 0,3 mm € Njdpjwiquksfx Af Eedc 6060,00 R GROUP - GRINDING BELT Motor 11 kW € 740,00 X GROUP - CUP BRUSHES Motor with variable speed 5,5 kW 350/1100 incl. OPTIONS: Return to Sender System (Grinding part is discharged to the front again) € 1770,00 Conveyor belt with vacuum system - 3,0 kW € 5150,00 Additional PVC coated rollers on infeed and outfeed side € 1510,00 Air pressure system for cleaning the conveyor belt € 1290,00 Tampico Brush System for parts cleaning 0,55kW Ø 150 mm € 4670,00 Tampico Brush system for conveyor belt cleaning Ø 150 mm € 3200,00 magnetic conveying system - 2 groups, 200 x 200 mm € 12020,00 Dema...

Condition: good (used), Technical data for the shim: Manufacturer: Bito Ndjdpfxei Hknys Af Eoc Included in delivery: 01x shim, used Material color: sendzimir galvanized total width: approx. 140 mm total depth: approx. 105 mm material thickness: approx. 1,50 mm hole distance (center - center hole): approx. 110 mm Weight: approx. 0.15 kg | pcs.

Condition: good (used), Technical data for the shim: Manufacturer: Bito Included in delivery: 01x shim, used Material color: sendzimir galvanized Njdpfx Afei Hknvs Esdc total width: approx. 140 mm total depth: approx. 105 mm material thickness: approx. 4,00 mm hole distance (center - center hole): approx. 110 mm Weight: approx. 0.41 kg | pcs.