Used Transformator Station for sale (5,355)

Year of construction: 2014, condition: used, JetPetroClean container washing station Producer: OU Dontal, Estonia The installation is used to clean the inside of petroleum products tanks, especially railway cisterns. The cleaning process takes place in a closed system using hot water or hot water with detergents. Washing consisted in introducing a washing head through the upper hatch of the tank, and then washing the inside of the tank under a specified pressure. Dirty water was drained to the container tank by means of the lower inlets of the cistern, by means of diaphragm pumps. There, after the separation of impurities, the water returned to the circulation and was reused for further washing. It took about 1 hour to wash one tanker. The next step was to dry the inside of the tank and remove solid waste from the inside of the tank using exhaust fans. After the washing process was completed, the installation was blown through and dried using compressors. 1. Main container unit: 20-feet container - year of production 2014 two main Lowara pumps - year 2014 hydraulic system with pressure gauges washing water tank (water tank 5770 L, waste tank 2540 L) Control cabinet compressed air tank 2. Auxiliary unit: 20-feet container - year of production 2012 two compressors GD ESM 11-7.5A - year of production 2013 gas generator - year of production 2015 control cabinet Meganex 15 kW electric heaters - year of production 2014 four Soler & Palau CBRT / 2-502 5.5 kW fans - year 2014 two diaphragm pumps compressed air tank 3. Waste container in a container construction 4. Rigid steel pipes and plastic hoses 5. Structures, platforms, stairs and railings for handling tanks 6. Washing heads, knees, valves and other elements of the hydraulic system. . Technical condition: used installation, for technical inspection before restarting. Fpedpfxohgimds Aa Eod

Year of construction: 2008, condition: excellent (used), Blower station AERZEN GM90 S no. 896925 2008 Blower GM90 S no. 896925 59.80 m3/min 1 bar 93.80 kW 2008 Engine AERZEN 110/125kW no. OC30249 Fpedpsv D Ey Esfx Aa Eed 2008

Year of construction: 1996, condition: used, For sale 3 transformers 1600 kVA, 1000/800 kVA Fpjdpfx Aeh Eu Rzoa Eod Manufacturer: Home,

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, total length: 10,200 mm, total height: 2,600 mm, workpiece length (max.): 4,000 mm, The washing machine consists of the following components: Pre-wash zone Washing zone Rinse zone Acid zone Fodpfeyk Sgvex Aa Espd Drying Silane application TECHNICAL DETAILS Maximum length of sheets to be washed: 4,000 mm MACHINE DETAILS Total length: 10,200 mm Total height: 2,600 mm

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 1425, table length: 3,300 mm, Urban sash stop station with fittings rack Fjdeyk Rv Aspfx Aa Ejpd Screw feed unit S 330 Milling unit FE 330 for milling out the lock case Hardware punching unit BS 330 with stop system for central and consistent handle position Olive drilling unit GOB 330 with hydropneumatic feed including accessories for spindle size adjustment

Condition: new, Transformer 220 V mono to 380 V tri Fpodpfx Aoyk E Hvoa Esd Power converter: 10 kW New, never used Dimensions (L x W x H): 800 x 600 x 500 mm

Condition: new, Year of construction: 2026, Special Offer: TruMark Station 3000 Maximum productivity, minimal footprint: Compact industrial solution for precise laser marking. Take advantage of our special offer now: TruMark Station 3000 package for only €24,950!* Get started with the ideal marking solution! The TruMark Station 3000 is a compact marking solution designed for precise laser marking of small to medium batch sizes. Small footprint, large working area: - TruMark Station 3000 equipped with electric door and motorized Z-axis - Suitable for workpieces up to 440 × 200 × 350 mm (W × H × D) - The One-Box Laser TruMark 5010 is supplied with an extraction unit Versatile applications: Whether annealing, engraving, or ablation – mark a wide variety of metals and plastics. The package includes a fixed configuration of the TruMark Station 3000 with the One-Box Laser TruMark 5010. * TruMark Station 3000 package valid until April 28, 2026. Fjdpfx Aaeykvr As Eopd TruMark Station 3000 Workstation dimensions (W × H × D): 625 × 730 × 672 mm Electrical connection (voltage, frequency, current): 230 V, 50 Hz, 16 A Extraction unit: Type KKF 300 L Laser safety class: 1 TruMark 5010 Average power: 20 W Wavelength: 1062 nm Min. focus diameter: 40 μm Max. internal focus adjustment: 10 mm Marking field: 110 × 110 mm Focus finder, navigator: Yes

Condition: excellent (used), Epson G10-854SR Robot Assembly Station and Dispensing Station Fedpfx Aoibx S Nea Ejpd The assembly station is divided into the following sub-stations: 3.1 Dispensing Area, 3.2 KK+SW Assembly Area, and 3.3 Front Assembly Area. (KK = Heat Sink, SW = End Wall Bracket) St. 3.1: Dispensing Area: - A workpiece carrier (WT) with mounted chassis and PCBs enters the dispensing area via the transfer belt. - It is stopped at the lifting-positioning unit (HuPo), lifted off the belt, and fixed in place. - The X-Y-Z handling moves the dispensing head to the designated position and starts the dispensing process. - After successful dispensing, the handling moves to the rest position, and the WT is placed back on the belt. - Continued transfer to the KK+SW assembly area (provided there is no WT in the mounting position). St. 3.2: KK+SW Assembly Area: - A WT from the dispensing area arrives in the KK+SW assembly area via the transfer belt. - It is stopped at the lifting-positioning unit (HuPo), lifted off the belt, and fixed in place. The chassis side walls of the partially assembled unit are aligned. - KK tray and SW tray positioning occurs simultaneously. - A stack of 12 KK trays and a stack of 12 SW trays are manually placed on their respective infeed conveyors outside the safety enclosure. - The two safety shutters are opened, and the loaded tray stacks move into the gripper position of the respective stacker. - The safety shutters are closed again. - The respective grippers pick up the corresponding tray. - The tray is separated using the Z-axis and transported upward (above the normal pick-up height). - For centering and stabilization, a centering support is positioned beneath each tray using X-axis handling. - With the stacker's Z-axis, the respective tray is placed on the centering support. - The trays are ready for component pick-up. - With the multi-gripper on the SCARA robot, the KK is picked up from the tray and placed in an intermediate position as an alignment aid (to achieve exact pick-up positions for assembly). - The KK is scanned, picked up again, and if the scanner result is OK, mounted onto the WT. - Any KK that is not OK is placed in a reject box. - The multi-gripper on the SCARA robot then picks up the SW from the tray and places it in the alignment position. - The SW is picked up again and mounted onto the WT. - Assembly continues in the front assembly area. Technical Data: Design: SCARA (4-axis robot) Nominal Load Capacity: 5 kg, Maximum: 10 kg Horizontal Reach: 850 mm Vertical Reach: Axis 3: 420 mm Orientation Range: J4: +/- 360° Repeatability (Horizontal): +/- 0.025 mm Repeatability (Vertical, J3): +/- 0.01 mm Repeatability (Orientation, J4): +/- 0.005° Maximum Working Range: Axis 1: +/- 152°, Axis 2: +/- 152.5°, Axis 3: 420 mm, Axis 4: +/- 360° Maximum Operating Speed: J1, J2: +/- 11,000 mm/s, J3: +/- 2,350 mm/s, J4: +/- 2,400°/s Permissible Inertia: nominal 0.02 kg*m², maximum 0.25 kg*m² User Wiring (electrical): 1x D-Sub 9 pin, 1x D-Sub 15 pin Z-Axis: Outer diameter: 25 mm Press-in Force: 250 N Weight: 48 kg Controller: EPSON RC180 Mounting Type: Ceiling IP Protection Class: IP20 Power and Signal Cables: 3m Financing through our bank is also possible. komplett-konzept.leasingo.de

Year of construction: 2003, condition: good (used), Schatz Advanced Screwdriving Unit  Schatz screw machine Length: 5450 mm Height: 3000 mm Unwinding stand Length 5020 mm Fodpfxjihiiis Aa Eepd 2 x Demag crane 1 x Liftket electric chain hoist  1 x Schatz 907500 Installation without Advantech TPC-1260 TE Touch Panel PC Financing through our bank is also possible. komplett-konzept.leasingo.de More screwdriving machines in other sizes - new and used - can be found here.

Condition: good (used), Soco System Packing Station System 14,800 mm double-deck roller conveyor with 800 mm steel rollers Lower roller conveyor with drive Upper roller conveyor without drive (gravity roller conveyor) 9,850 mm roller conveyor with 600 mm Ø 48 mm plastic rollers, with drive and two through-feed flaps 90° curve with conical rollers and two drives for heavy loads 6,000 mm roller conveyor with 600 mm Ø 48 mm plastic rollers, with drive 9,750 mm roller conveyor with 600 mm Ø 48 mm plastic rollers, without drive 6 x Rocholz System Flex packing and work tables Carton magazine Workstation lighting Keyboard and mouse tray with articulated arm Monitor mount with articulated arm 10-way power strip Perforated back panel PC mount Storage shelf Width: 2,000 mm Depth: 800 mm 6 x 1,000 mm Transfer roller conveyor, 600 mm steel rollers 6 x 1000 mm transfer roller conveyor, 600 mm plastic rollers Switch and control cabinet Financing through our bank is also possible. komplett-konzept.leasingo.de Fjdpfsxl Rn Tjx Aa Espd Find more items – new and used – in our shop! International shipping available upon request!

Condition: excellent (used), Year of construction: 2007, Laboratory foam dosing station with foam mixer and applicator The system works in a similar way to the SUPRA MIX concept. Several chemicals are dosed and mixed with water and air in a controlled ratio. Recipes are stored on the controller and can be changed during operation. Foam applicator with mixer - Dynamic foam mixer with online dosing of 5 products + water - 5 dosing pumps - One direct inlet for mixing - Product monitoring for the chemicals - Air dosing valve - Dynamic foam mixer with adjustable speed - PLC control - Foam applicator - For one-piece carpets up to 1 m wide applications Stain blocker Dirt, water and oil repellents Fluorocarbons Antistatic chemicals Plasticizers Flame retardants Antibacterial chemicals Moth and beetle repellents Pile stabilizers Anti-hair loss agents Resins for wrinkle prevention and dimensional stability Specification Fsdpfeu D E A Dox Aa Ejpd Foam density: 20 - 100 g/l (higher density at lower flow rate) Dosing range: 0.5 - 500 g/l (1:100 with each pump) Foam volume: 50 - 500 l/min Electrical data Connected load: 6kVA, 10A Mains voltage: 400V / 50Hz Control voltage: 24V Dimensions HxWxD = 1400 x 2100 x 860 mm Year of construction: 2007 Purchase price: 47600 ,- € Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), ZIM Hülsta Cabinet Erector The cabinet erector is used to erect and transport assembled cabinets. Cabinet erectors are typically used with cabinet presses that have a continuous feed system. It facilitates the handling of large workpieces when erecting them. Transport and assembly device within a cabinet assembly line. Behind a continuous cabinet press, the pressed cabinets are laid on their backs using this device. Fpodsvdb Ixepfx Aa Eod This allows assembly work to be carried out on the underside. Manufacturer: ZIM Hülsta-Werke Type: Cabinet Erector Dimensions: Roller conveyor L x W x H: 2800 x 900 x 800 mm Roller width: 800 mm Tilting surface: L x W 1000 x 900 mm Power supply: 3 x 400 V AC Connected load: 2 kW Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Feed unit with 6 drum motors Round motor Fodpeq E Ipbjfx Aa Espd Motor roller Drum motor

Year of construction: 1999, condition: excellent (used), Control system: CNC-controlled and manual operation PC P 2000 MMX-PCI Desktop ATX 15" color display, keyboard CNC-Turbo Roughness for WINDOWS TECHNICAL DATA Granite test plate (DIN 876) Length x Width 1200 x 500 mm Accuracy grade Grade 2 Flatness: 16.6 µm Weight 250 kg Linear traversing unit Waveline 60 Basic Measuring stroke 60 mm Resolution 0.014 µm Measuring column Wavelift 400 CNC Travel distance 400 mm Positioning repeatability < 10 µm Machine dimensions (W x D x H) 1.8 x 0.8 x 2.2 m Weight 600 kg EQUIPMENT/ACCESSORIES Fpedpfxolxyp Ho Aa Eed  Complete enclosure with electrically operated roller shutters  Granite plate 1200 x 500 mm  ISEL feed axis with ball screw  Workpiece support plate  Linear feed unit Waveline 20/60  Measuring column Wavelift 400 CNC  Tilting unit KEG 60 on the measuring column, manual for Waveline  Built-in kit for roughness measurement  Built-in kit for contour measurement  Various probes and holders for roughness and contour measurements  Machine table  Emergency stop button on the machine table  Calibration set  Support prisms  Maintenance unit for compressed air preparation  Air damping elements for supporting the granite plate  Documentation

Year of construction: 1998, condition: excellent (used), Control: CNC-controlled and manual operation PC P 2000 MMX-PCI Desktop ATX 15" color monitor, keyboard CNC Turbo Roughness for WINDOWS TECHNICAL DATA Hard stone inspection plate (DIN 876) Length x Width: 1200 x 500 mm Accuracy class: Grade 2 Flatness: 16.6 µm Weight: 250 kg Linear feed unit Waveline 60 Basic Probing range: 60 mm Resolution: 0.014 µm Measuring column Wavelift 400 CNC Travel range: 400 mm Positioning repeat accuracy: < 10 µm Machine dimensions (W x D x H): 1.8 x 0.8 x 2.2 m Weight: 600 kg EQUIPMENT / ACCESSORIES  Completely enclosed housing with electrically operated shutters  Hard stone plate 1200 x 500 mm  ISEL feed axis with ball screw drive  Workpiece mounting plate  Linear feed unit Waveline 20/60  Measuring column Wavelift 400 CNC  Tilting unit KEG 60 on the measuring column, manually adjustable for Waveline  Installation kit for roughness measurement Fpsdpfjlxyqcsx Aa Eod  Probes and holders for roughness measurement  Machine table  Emergency stop button on the machine table  Maintenance unit for compressed air preparation  Air damping elements for hard stone plate support  Documentation

Condition: used, Year of construction: 2008, cast epoxy resin, dry distribution 3 phase transformer manufactured by TESAR Italy, 2000kVA, 15000 ( ± 2 x 2,5 %) /400V; Dyn5, IP00, year of production 2008, IEC losses, project documentation and rutine protocol, manuals, total 3 pcs. Fpedpeykb Ngefx Aa Ejd

Condition: used, Year of construction: 1988, machine/vehicle number: 26184, Presstation / Press station Stahl PS 46Year 1988 - Serial-No. 26184 Arbeitsbreite / Working width max. 460mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Fjdpeh Axlhefx Aa Eepd

Condition: used, Year of construction: 2009, Banderolieranlage für Banknoten und Schecks - Banding system for banknotes and cheques ATS US-2000 SIB-BIN3Year 2009 - Serial-No. BTA 734 V5A96330 Performance - up to 24 bandings per minute Fsdpfxjh Axrre Aa Ejpd Band width - 20, 30, 50 mm Voltage - 230 V, 13 A Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1994, machine/vehicle number: 940114747, Falzwerk 2. Station Eigensteuerung / Folding Unit 2. Station SelfControl MBO T79-2-81/4Baujahr / Year 1994 - Serial-No. 940114747 4 Taschen Falzwerk / 4 buckles folding unit Arbeitsbreite max. 460mm / Working width max. 460mm Eigensteuerung / SelfControl Nachgelagterte Messerwelle / rear mounted slitter shaft Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Fedpoilx Srjfx Aa Ejpd Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 1994, machine/vehicle number: 940114747, Falzwerk 3. Station Eigensteuerung / Folding Unit 3. Station SelfControl MBO T79-3-46/2Baujahr / Year 1994 - Serial-No. 940114747 2 Taschen Falzwerk / 2 buckles folding unit Arbeitsbreite max. 460mm / Working width max. 460mm Eigensteuerung / SelfControl Nachgelagterte Messerwelle / rear mounted slitter shaft Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Fodpfx Aoilx Snoa Espd Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2016, machine/vehicle number: 1037516, Faltschachtelklebemaschine / Folder Gluer Lamina 1800GL WSYear 2016 - 1037516 Manual fed in-line folding, gluing and taping machine Format min. 70mm - max. 1800mm Nordson hotmelt Gluing Unit - 2 gluing hedas Speed 0-40 m/min PLC control with touch screenThe Lamina Gluer is a manual fed in-line folding, gluing and taping machine. By the genius construction it is able to handle various sizes of different materials. The tool free set-up allows a quick change over even for short runs. Options for the machine include cold glue, back support unit, tape applicator etc. Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Fpsdpfx Ajq Rx Srja Esd Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Year of construction: 2014, Tecna 3484 Universal Spot Welding Station 8 kVA Universal welding station 8 kVA, manually operated gun, double program. Simultaneous connection of two tools with automatic recall of the corresponding welding program, saving time and avoiding errors in terms of simple and safe work flow. Fjdpfxel Smn Sj Aa Ejpd Body repairs: resistance spot welding of sheet metal, smoothing with dent spotter (nails and washers), local heating (carbon electrode), screw and rivet welding, dent removal of stainless steel sheet. Synchronous SCR welding control, setting of welding time in cycles and pulses, setting of welding current and compensation function. Mains supply: 400V Mains frequency: 50 / 60 Hz Fuse: 25 A Rated power at 50 %ED: 8 kVA Max. Welding power: 35 kVA Max. Secondary current: 6,4 kA Heat current 100 %: 0,88 kA Year: 2014 Weight: 85 kg Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our store! International shipping costs on request!

Condition: good (used), Roche MagNA Pure LC Nucleic Acid Preparation Station Description of the manufacturer, all data without guarantee. Services Save time with fast, fully automated isolation of high-quality DNA, RNA and mRNA. Get reliable, reproducible results. Benefit from high flexibility in sample type and volume as well as elution volume and post-elution processes. Benefit from software-assisted set-up of reagents and disposables. Automated pipetting of PCRs into LightCycler ® capillaries (LightCycler ® sample carousels ), LightCycler ® 480 multi-well plates (96-well), PCR plates or strips or tubes. Fjdpoh Dpxhjfx Aa Eopd Product description The MagNA Pure LC instrument is a benchtop instrument for rapid, cross-contamination-free nucleic acid preparation and PCR setup. A fully enclosed housing, automatic clot and tip loss detection and sample tracking make the MagNA Pure LC instrument a true "walk-away" instrument. Filtration, centrifugation and other manual steps are completely eliminated. No vacuum pumps or tubing are required. With the piston-driven 8-channel nozzle head and liquid handling with direct displacement, the risk of cross-contamination is reduced to an absolute minimum. The UV decontamination and HEPA filter system ensure maximum safety for samples and the environment.  Item condition: used untested Scope of delivery as shown Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our shop! International shipping costs on request!

Condition: new, Year of construction: 2023, Type: Conveyor belt - 15.000 mm Item no.: 100000705 Conveyor width: 600 mm Total width: 800 mm Fedpspag Tzofx Aa Eepd Conveyor length: 15.000 mm total height / conveying height: 300 mm total height / conveying height: 700 - 1.075 mm Cheeks type: extrusion profile Cheeks material: aluminum Drive Type: 400V SEW gear motor Power: 550 W Overdrive: Chain drive Material top side: Polyvinyl chloride (PVC) Material bottom side: Polyester (PET) Color: Black matt Requirements for the material to be conveyed bottom / underside: piece goods free from dirt max. weight: 30kg (50kg for conveying length up to 3000 mm) without incline minimum length: depending on application

Condition: excellent (used), Year of construction: 2019, 2-axis positioner - BEAR RT series Robot - Kawasaki BA006L from the year 2019 Power source - Fronius TPS 400i from the year 2019 Robot and positioner in very good technical and visual condition - as shown in the photos. In continuous operation. Fjdpfxjmu Agpj Aa Espd