Used Torque Tester for sale (2,805)

Condition: used, Year of construction: 2008, Technical details: x-travel: 2665 mm y-travel: 2440-2890 mm z-travel: 750 mm max. torque on the spindle: 4400 Nm control: Siemens 840D workpiece diameter - max.: 800 mm workpiece length - max.: 750 mm tool changer with: Scheiben-Revolver 12-fach places spindle speed:: 750 U/min Dusdpfx Acow S Htaj Nsn tool taper: 50 voltage: 400 V Total power requirement: 92 kW Weight approx.: 30 t dimension machine xH: 7,0 x 3,1 x 4,5 m The machine has a turret with 12 tool stations (VDI 50) and a milling spindle with a tool changer for up to 96 tools. The tool magazine can be loaded during machining, which reduces setup time and allows the use of “sister” tools. The proven EMAG turret is available for turning operations on the machine. The VLC 800 MT multifunctional machining center can completely machine parts up to 800 mm in diameter in a single clamping. If necessary, a new (unused) spindle unit can be purchased as an option. (#1100673) *

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 2,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 850 mm, spindle speed (max.): 16,000 rpm, spindle motor power: 64,000 W, number of axes: 5, This 5s C.B. Ferrari GT2000 vertical machining centre was manufactured in 2019. It features a 5-axis CNC control with a Heidenhain TNC 640, offering extensive travel capabilities of 2,000 mm on the X-axis and 850 mm on the Z-axis. The machine includes a 30-position rotary tool magazine and an electrospindle with a speed of 16,000 rpm. Consider the opportunity to buy this C.B. Ferrari GT2000 vertical machining centre. Contact us for further details. • Continuous head support • Spindle: • Type: Electrospindle • Tool interface: HSK-A63 • Torque: 170 / 236 Nm • Tool system: • Tool magazine: 30 positions, rotary type • Table: • 1-axis rotary table Dujdpfoyh Nb Nsx Ac Nen • Table size: 1,840 mm • Cooling & lubrication: • Spindle cooling with emulsion • High-pressure coolant system: 75 bar • Coolant tank capacity: 460 liters • Air cooling system • Ball screw lubrication for high production Additional equipment • Chip conveyor • Heidenhain remote handwheel • Wash-down gun with pump • Mechanical probing device • 3D probe pre-installation • Electrical pre-installation for 3D probe • Industry 4.0 preparation package • Air-cooled spindle refrigeration unit • Frequency inverter for spindle – option 42

Condition: used, Year of construction: 2023, An as new 2023 and hardly used, XYZ TMC 750 Toolroom VMC with RMX wide screen control, additionally specified with: Advance Features RMX, Tacking including retractable Electronic Handwheels, and DXF Converter - cost in excess of £50,000 + VAT when new! Specification: Working Area 743 x 425 x 489mm Table Size 830 x 410mm Spindle Centre to Column 500mm Spindle to Table 100 - 600mm Column Front to Table Centre 305 - 745mm Rapid Feedrate 20 M/min Cutting Feedrates 1 - 20,000 MM/min Max Table Load 500kg Dsdpfxeyh Ixmo Ac Njun T Slot Size 16mm T Slot Number & Pitch 3 off @100mm Spindle Speeds 5 - 8,000 rpm Spindle Motor 11kW (15hp) Spindle Taper BT40 20 Station Carousel ATC Chip to Chip Tool Change Time 8 secs Max Tool Diameter 100mm Max Tool Weight 7kg Coolant Tank Capacity 125L Ballscrew (Grade C3) 32mm Dia P8 AC Servo Motor Max Torque X = 5 Nm / Y = 5 Nm / Z = 10 Nm Machine Weight 3,500kg Footprint 2,392 x 2,460 x 2,670m

Condition: good (used), Year of construction: 2003, operating hours: 18,538 h, functionality: fully functional, machine/vehicle number: 431, overall weight: 7,000 kg, total width: 2,000 mm, total length: 11,000 mm, total height: 1,900 mm, controller manufacturer: TRAUB, controller model: SYSTEM TX 8i, TRAUB TNK 36 CNC Automatic Lathe - Operating voltage: 460 V - Frequency: 50 Hz - Connection power: 33 kW - Rated current: 56 A Main spindle: - Bar capacity: 36 mm - Max. speed: 6,300 rpm - Drive power at 100/40% duty cycle: 6.7/10.7 kW - Torque at 100/40% duty cycle: 21/32 Nm Upper tool turret: - Number of tooling stations: 12 - X-axis travel: 50 mm - Y-axis travel (option): ±20 mm - Z-axis travel: 100 mm - Rapid traverse X/Y/Z: 15/15/15 m/min - Position feedback resolution X/Y/Z: 0.0005/0.001/0.001 mm - Thrust force X/Y/Z: 4,240/4,240/4,240 N Front unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm - X-axis travel: 370 mm - Z-axis travel: 250 mm - Rapid traverse X/Y: 30/30 m/min - Thrust force X/Z: 2,800/2,120 N - Position feedback resolution X/Z: 0.0005/0.001 mm Rear unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm - X-axis travel: 73 mm - Y-axis travel: ±50 mm - Rapid traverse X/Y: 15/15 m/min - Thrust force X/Z: 4,240/4,240 N - Position feedback resolution X/Z: 0.0005/0.001 mm - Including all tool holders shown in the photos, as well as a chip conveyor and coolant system by Resy, and a bar loader by FNB, model: TURBO 5-42. Duedeyh Ivlepfx Ac Nsn Attention: The item must be collected bindingly on a to-be-agreed appointment between 01 and 02 April 2026. FCA D-79115 Freiburg – loaded onto truck

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: AZ0238, turning length: 400 mm, turning diameter: 250 mm, travel distance X-axis: 180 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,400 mm, total length: 4,000 mm, total width: 2,000 mm, overall weight: 8,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, SPINNER TC 300 52 SMCY CNC Lathe - Operating voltage: 400 V - Frequency: 50/60 Hz - Rated current: 35 A - Maximum swing diameter: 300 mm - Y-axis travel: +45/-30 mm Spindle 1: - Maximum speed: 5,000 rpm - Spindle power: 15 kW - Torque: 95 Nm Spindle 2: - Maximum speed: 7,000 rpm - Spindle power: 6/7.8 kW - Turret number of tools: 12 Dodoyh Iryspfx Ac Noun - Tool holder: VDI 25 - Including live tools: 12 - Maximum speed: 6,000 rpm - Including chip conveyor Note: The item must be collected on a binding appointment between 01 and 02 April 2026 to be coordinated. FCA D-79115 Freiburg – loaded on truck

Condition: used, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 35-10.000 1/min spindle: 37 / 30 kW max. torque on the spindle: 525 / 206 Nm Tool bore: BT 50 rapid traverse: 60 m/min tool change unit: 160 Pos. size of pallet: 500 X 500 mm control: MAZATROL 640M Nexus c-axis: 0,001° x 360.000 workpiece weight: 1.000 kg workpiece height max.: 1.000 mm interference area: 900 mm 2 pcs. horizontal machining centers (HCN 6000-II + HCN 6000, 2005), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, Duodpfxswix Hhs Ac Non coolant device with internal coolant supply, *

Condition: used, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 35-10.000 1/min spindle: 37 / 30 kW max. torque on the spindle: 525 / 206 Nm Tool bore: BT 50 rapid traverse: 60 m/min tool change unit: 160 Pos. size of pallet: 500 X 500 mm control: MAZATROL 640M Nexus c-axis: 0,001° x 360.000 workpiece weight: 1.000 kg workpiece height max.: 1.000 mm interference area: 900 mm 2 pcs. horizontal machining centers (HCN 6000 + HCN 6000-II, 2008), interlinked with pallet pool (16 pallets) MAZAK FMS, 2 pallet changer, chipconveyor, coolant device with internal coolant supply, Dedpfx Acowix E Ro Neun *

Condition: ready for operation (used), Year of construction: 2013, operating hours: 23,265 h, laser power: 5,000 W, This TRUMPF Trulaser 5030 Fiber was manufactured in 2013. It features a closed frame, torque drive, linear direct drive, and a TruDisk 3001 solid-state laser. Equipped with an automatic pallet changer, 17-inch touch screen, and integrated camera for process monitoring. Ideal for precise fiber laser cutting. If you are looking to get high-quality cutting capabilities consider the TRUMPF Trulaser 5030 machine we have for sale. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Trulaser 5030 (l56) documentation • Machine software • 1 additional postprocessor • Trutops laser programming course Extra Information General Data Machine: Closed machine frame Torque drive combined with linear direct drive Closed beam guidance via fiber optic cable (LCC) Machine cooling unit (water-air) Integrated control cabinets with interior lighting Automatic pallet changer in the longitudinal direction 17* touch color screen Wide longitudinal conveyor belt TruDisk power supply via the machine Work area lighting Positioning Laser Guides: Spray direction PierceLine FocusLine NitroLine PlasmaLine Automatic nozzle cleaning Coupler cutting package (includes cutting data) Brass cutting package (includes cutting data) Transport and assembly device TRUMPF Laser: TruDisk 3001 solid-state laser with one LLK output Fiber optic cable according to standard layout Laser cooling unit (water-air) Dsdpfsx D Hg Asx Ac Neun Excitation via Pump diodes Laser power control Subject to international export controls according to EC Dual-Use Regulation 428/2009 (lasers covered by 6A005) Cutting Head: Universal cutting unit with fully adaptive lens system Single-head cutting strategy Protective glass to protect against lens contamination ControlLine: Height control and outer sheet edge trimming Control: SINUMERIK 840D SL control system Simple and advanced workshop programming Fast re-production Integrated technology data Automatic shutdown Programmable cutting gas/pressure selection FastLine, FlyLine, AdjustLine Data Transfer: USB interface RJ-45 network connection Safety: CE marking Light barriers Multi-chamber extraction system Compact dust extraction system Machine enclosure, certified safety glass, door on the right Electric retractable roof Voltage and Frequency: Voltage: 400 V Frequency: 50 Hz Color: Standard white - blue RAL design 250 20 20 - blue NCS S 0505 RBOB - white Solid-state Laser: TruDisk 5001 with 1 air cooler outlet Additional Features: Nozzle changer BrightLine fiber DeteciLine: Precise sheet position detection Clamping clamps (2 pieces) Integrated camera (Full HD) for process monitoring with monitor interface Individual oil feed into the network ClitMaster Gompact retrofit capability

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 344, overall weight: 7,000 kg, total width: 2,000 mm, total length: 11,000 mm, total height: 1,900 mm, controller manufacturer: TRAUB, controller model: SYSTEM TX 8i, TRAUB TNK 36 CNC Automatic Lathe - Operating voltage: 460 V - Connection power: 33 kW - Rated current: 56 A Main spindle: - Bar capacity: 36 mm - Max. speed: 6,300 rpm - Drive power at 100/40% duty cycle: 6.7/10.7 kW - Torque at 100/40% duty cycle: 21/32 Nm Upper turret: - Number of tooling stations: 12 - X-axis travel: 50 mm - Y-axis travel (option): ±20 mm Dodpfx Asyh Hkzsc Nsun - Z-axis travel: 100 mm - Rapid traverse X/Y/Z: 15/15/15 m/min - Scale resolution X/Y/Z: 0.0005/0.001/0.001 mm - Input force X/Y/Z: 4,240/4,240/4,240 N Front unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm - X-axis travel: 370 mm - Z-axis travel: 250 mm - Rapid traverse X/Y: 30/30 m/min - Input force X/Z: 2,800/2,120 N - Scale resolution X/Z: 0.0005/0.001 mm Rear unit: - Number of tooling stations: 5 - Diameter: 40 mm - Spacing: 54 mm - X-axis travel: 73 mm - Y-axis travel: ±50 mm - Rapid traverse X/Y: 15/15 m/min - Input force X/Z: 4,240/4,240 N - Scale resolution X/Z: 0.0005/0.001 mm - Includes the tool holders shown in the photos, a chip conveyor and coolant system from manufacturer Resy, as well as a bar feeder from manufacturer FNB, type: TURBO 5-42 Note: The item must be collected by binding appointment between April 1st and 2nd, 2026, on a date to be mutually agreed upon. FCA D-79115 Freiburg – loaded onto truck

Condition: excellent (used), Year of construction: 2014, operating hours: 39,000 h, functionality: fully functional, machine/vehicle number: 3325, Model S-191FTL-PRM Ø 50 mm Axis travel Milling vertical axis Z = 200 mm Milling transverse axis Y = 200 mm Milling longitudinal axis X = 410 mm Power / Thrust Z-Y 2.5 kW / 550 daN X 4.5 kW / > 550 daN X-Y-Z Traversing speed: 40 m/min Acceleration: 10 m/s² Resolution X-Y-Z: 0.0001 mm Measuring system: glass scale MAIN SPINDLE C (Horizontal turning axis) Power: 15 kW Torque / peak: 22 / 28 Nm Measuring system: direct Dedow T Sl Djpfx Ac Nsun Resolution: 0.0001° Accuracy: 0.001° Bar capacity: Ø 32 mm (option 50 mm) Turning spindle speed: 72,000°/min Clamping force, turning: 4,900 N at 6 bar B-AXIS SPINDLE INCLINATION (machining) Power: 4.3 kW Torque: 119 / 226 Nm Angular travel: -25° / +115° Measuring system: direct Resolution: 0.0001° Accuracy: 0.001° Rotational speed: 36,000°/min Locking torque: 200 Nm MACHINING SPINDLE Power: 8 kW Torque: S1 = 9.5 Nm / S6 = 11.5 Nm Max speed: 30,000 min-1 (option 40,000 min-1) Tool clamping force: 1,000 N Locking torque: mechanical locking with straight toothing Tool holder taper: HSK-40 (A or E) Through-spindle lubrication: 30 to 100 bar (optional) TOOL CHANGER Number of tools: 30 (option 60) Number of indexed tools: all Tool change time: 1.2 sec. Chip-to-chip time: 4.4 sec. Max tool diameter: Ø 40 mm (80 mm if adjacent station empty) Max tool length: 130 mm Max tool weight: 1.5 kg MISCELLANEOUS Installed power: 25 kVA Operating voltage: 3/N/PE/400V/230V 50 Hz Pneumatics: 6 bar (dry air) CNC CONTROL: Fanuc 31i Screen: 15'' color Keyboard: alphanumeric Control panel features: - 1 key switch for functions - 1 feedrate potentiometer 0–120% - 1 spindle speed potentiometer 50–120% - 1 quick-selection button for machine functions - 1 integrated electronic handwheel CNC Options - Data server with ATA Flash, 1GB memory capacity - J947 1 MB RAM memory - S677 TCPC (tool center point control for 5-axis machining) - S808 Al nano HPCC (Al high precision contour control II) - J930 tool tip radius compensation - J893 coordinate system rotation - J819 Helix (cylindrical) interpolation - J953 memory capacity for 1,000 programs - J828 tapping without compensation chuck - S615 insertion of radii and chamfers - J894 workpiece coordinate system - S993 part setup error - R522 inclined machining plane control with guidance Interfaces - Bumotec-specific programming to minimize collisions - Simplified tool management to prevent input errors - Tool management by threshold value, change according to part count or tool life - Automatic tool setting on machine for easier tool handling - Part counter and production management Y-AXIS (horizontal cross milling axis) Travel: 200 mm Power / thrust: 4.8 kW / 240 daN Resolution: 0.0001 mm Max travel, V1: 50 m/min Max travel, V2: 20 m/min Measuring system: glass scale Z-AXIS (horizontal longitudinal milling axis) Travel: 400 mm Resolution: 0.0001 mm Max travel, V1: 50 m/min Max travel, V2: 20 m/min Measuring system: glass scale Includes 8kW cooling unit Emergency braking system integrated Subject to errors and omissions, technical specifications are provided without obligation.

Condition: used, functionality: fully functional, mileage: 282,645 km, power: 368 kW (500.34 HP), first registration: 03/2023, fuel type: diesel, overall weight: 8,287 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 7, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Cruise Control: I-See. Map based topography information. Globetrotter XL Cab, extra high sleeper. Single energy battery system (2 batteries). D13K500 diesel engine, 500hp, 2500Nm SCR and EGR. EURO 6. I-Shift Automated 12-speed - GCW 60 tonne. Standard transmission shift - I-Shift or Powertronic. Volvo Engine Brake - Retardation D13K-375kW/D16-500kW. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Electrically controlled air conditioning with sun sensor. Comfort 4: suspended - belt in seat Height adjustable foldable top bunk 700 x 1900mm. Lower bunk 815mm wide in the centre. Aux. cab heater: 1.8kW Air to air. 33 litre under bunk mounted fridge / freezer with dividers. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Front tyres - 315/60 R22.5. Rear tyres - 315/60 R22.5. SAF-Holland/+GF+ SK-S 36.20 cast fixed fifth wheel. Wheelbase 3800 mm. Max capacity fuel tanks 570 LITRE ( 150 US GALL.), RIGHT SIDE FUELTANK 900 LITRE, LEFT SIDE FUEL TANK WITH STEPS 65 litre under/behind cab Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Technology Secondary colour information display. Duedjyh Aa Ejpfx Ac Nsn FMS gateway for Fleet Management System. Exterior LED headlamps V-shaped Front fog lights - white Roof air deflector Cab side air deflector - long tractor

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Controller DOOSAN FANUC i Series Table size 1630 x 760 mm Table load 1500 kgs X travel 1630 mm Y travel 762 mm Z travel 650 mm Spindle speed 12000 rpm Torque 117 Nm Tool holder type BT40 ATC magazin 30-fold Spindle power 18,5 / 15 kW Weight 14000 Kgs Dimensions LxWxH = 3700 x 4000 x 3090 mm Accessories Djdpfxeuu Rf Ds Ac Neun - Chip conveyor - Coolant unit - RENISHAW TS27 tool presetter - RENISHAW OMP60 zero point setting system - Manuals The machine is still in production but will be sold because of company liquidation. Good working order. The costs of moving and loading are not within in the machine price..

Condition: excellent (used), Year of construction: 2017, operating hours: 5,000 h, functionality: fully functional, Controller HAAS Table size D500 mm Table load 300 kgs X travel 762 mm Y travel 508 mm Z travel 508 mm B swivel +120 - 35 degree C rotation 0,001 - 360 degree Distance between spindle end and table surface 102 - 610 mm Max. spindle speed 8100 rpm Max torque 122.0 Nm at 2000 rpm Spindle power 22,4 kW Spindle drive system Inline Direct-Drive Tool holder SK40 ATC magazin 30+1-fold Max. tool dia (next to each other) D64 mm Max. tool dia (neighboard places empty) D127 mm Max. tool length 305 mm Max. tool weight 5.4 kgs Weight 6500 kgs Dimensions LxWxH = 4420 x 2340 x 2540 mm Features, accessories - Coolant unit - High pressure pump (CTS) Duedpfx Acsxva Aho Non - Chip conveyor - RENISHAW tool presetter - RENISHAW zero point presetter - Manuals The machine is still in production in Hungary and can be inspected in operation. It was purchsed as new. Ready to buy immediately.

Condition: excellent (used), Year of construction: 2012, bore capacity in steel (diameter) 62 mm arm length 350-1600 mm workpiece height max. 1250 mm distance spindle nose and table 350-1250 mm Boring depth max. 315 mm machine table 2400 x 1000 x 200 mm Turning speeds of the bor. spindle 38 - 2000 U / min spindle taper MT5 feed 0,06 - 1,00 mm/U engine output 4 kW Dodpjyhq T Njfx Ac Nsun stroke drive 1,5 kW oil pump 0,75 kW total power requirement 6 kW weight of the machine ca. 3,8 t dimensions of the machine ca. 2490 x 1050 x 2780 mm Steps of spindle speed: step-less Steps of spindle feed: 8 Speed of the arm up and down: 1.2 m/min Arm moving angle: ±180 degree Spindle moving distance of each dial revolution: 122 mm Max. spindle torque: 400 Nm Max. spindle feed resistance: 16000 N

Condition: used, Year of construction: 2009, dist. between centers 4.500 mm greates pass round over bed 820 mm Maximum cutting diameter 530 mm control Heidenhain Manual Plus 4110 workpiece weight max. 2.500 kg spindle bore 128 mm spindle nose DIN 55027 B11 turning speed range - spindle 0 - 1800 U/min phase 1 0 - 450 U/min phase 2 20 - 1.800 U/min Max. torque stage 1 3.000 Nm Max. torque stage 2 540 Nm travel -x axis 360 mm travel -z axis 4.500 mm feed capacity - x 10 kN rapid traverse 10.000 mm/min dia. of quill 115 mm total connected load 55 kVA machine weight ab. 7000 kg dimensions of the machine ca. 6.500 x 1.840 x 1.860 mmxmmxmm Equipment/accessories: -1 x faceplate -5 x jaw chucks -1 x closed steady rest -Clamping jaws -Multifix holder Dedpfx Aeyhq Tvec Noun -Turning tools -Various tips -Technical documentation

Condition: good (used), Year of construction: 2018, Automation system Turning diameter over bed: 760 mm • Turning diameter over cross slide: 600 mm • Maximum turning diameter: 460 mm Distances • Distance spindle – tailstock center (TA640): 689 mm • Distance chuck – tailstock (TA640): 625 mm Travel paths • X-axis travel: 310 mm • Z-axis travel (TA640): 640 mm • Y-axis travel: +70 / −50 mm • B-axis travel (TA640): 640 mm Rapid traverse • Rapid traverse X: 30 m/min • Rapid traverse Z: 30 m/min • Rapid traverse Y: 15 m/min • Rapid traverse B: 11 m/min (optional 30 m/min) Axis dynamics • Axis acceleration: 1 g (9.8 m/s²) Spindle • Maximum spindle speed: 3500 rpm • Spindle bearing Ø outer: 200 mm • Spindle bearing Ø inner: 130 mm • Spindle nose: ASA 8” A2 • Spindle bore: 86 mm • Bar capacity through draw tube: 78 mm Chuck • Chuck Ø: 250 / 315 mm • Chuck bore Ø: 77 mm Power & Torque • Main spindle power: 42 / 27 kW (max. / S6 40%) • Maximum torque: • 1020 Nm (max.) • 720 Nm (S6 40%) Tailstock Djdpfeyhqg Nex Ac Nsun • Morse taper: MT5 / MT3 • Tailstock travel (TA640): 640 mm • Maximum quill pressure: 1350 kgf

Condition: good (used), Year of construction: 2018, Turning diameter over bed: • 760 mm Turning diameter over cross slide: • 600 mm Maximum turning diameter: • 460 mm Distance spindle – tailstock center TA400: • TA15: 490 mm • TA20: 473 mm • TA25: 473 mm • TA30: 449 mm TA640: • TA15: 730 mm • TA20: 713 mm • TA25: 713 mm • TA30: 689 mm TA1100: • TA15: 1190 mm • TA20: 1173 mm • TA25: 1173 mm • TA30: 1149 mm Distance chuck – tailstock TA640: • TA15: 666 mm • TA20: 649 mm • TA25: 649 mm • TA30: 625 mm TA1100: • TA15: 1126 mm • TA20: 1109 mm • TA25: 1109 mm • TA30: 1085 mm Travels X-axis: • All models: 310 mm Z-axis: • TA400: 400 mm • TA640: 640 mm • TA1100: 1100 mm Y-axis: • +70 / −50 mm (for Y versions) B-axis: • TA400: 400 mm • TA640: 640 mm • TA1100: 1100 mm Rapid traverses X-axis: • 30 m/min Z-axis: • 30 m/min Y-axis: • 15 m/min B-axis: • 11 m/min (standard) • 30 m/min (option) Axis acceleration: • 1 g = 9.8 m/s² Spindle Maximum spindle speed • TA15: 4,500 rpm • TA20: 4,000 rpm • TA25: 4,000 rpm • TA30: 3,500 rpm Spindle bearing Ø outer • TA15: 150 mm • TA20: 170 mm • TA25: 170 mm • TA30: 200 mm Spindle bearing Ø inner • TA15: 100 mm • TA20: 110 mm • TA25: 110 mm • TA30: 130 mm Spindle nose • TA15 / TA20 / TA25: ASA 6" A2 • TA30: ASA 8" A2 Spindle bore • TA15: 61 mm • TA20: 73 mm • TA25: 73 mm • TA30: 86 mm Bar capacity through draw tube • TA15: 52 mm • TA20: 66 mm • TA25: 66 mm • TA30: 78 mm Chuck Chuck diameter: • TA15: 175 / 210 mm • TA20: 210 mm • TA25: 250 / 210 mm • TA30: 250 / 315 mm Chuck bore Ø: • TA15: 56 / 52 mm • TA20: 66 mm • TA25: 66 mm • TA30: 77 mm Power & torque Main spindle power (kW): • TA15: 14 / 8 • TA20: 22 / 15 • TA25: 35 / 19 • TA30: 42 / 27 Maximum torque: • TA15: 292 Nm (max) / 153 Nm (S6 40%) • TA20: 366 Nm (max) / 286 Nm (S6 40%) • TA25: 900 Nm (max) / 363 Nm (S6 40%) • TA30: 1020 Nm (max) / 720 Nm (S6 40%) Tailstock Morse taper: Dujdpfx Aeyhqavec Njn • MT3 / MT4 Tailstock travel: • TA400: 400 mm • TA640: 640 mm • TA1100: 1100 mm Max. quill pressure: • TA15: 930 kgf • TA20: 980 kgf • TA25: 980 kgf • TA30: 1350 kgf

Condition: used, turning diameter 340 mm turning length 575 mm control Mazatrol SmoothEZ max. swing diameter over bed 695 mm Standard machining diameter 235 mm bar material dia. max. 65 mm x-axis 215 mm rapid traverse X-axis 30 m/min y-axis 100 mm rapid traverse Y-axis 10 m/min z-axis 605 mm rapid traverse Z-axis 30 m/min turning speeds 35 - 5000 U/min spindle nose A2-6 spindle bore 76 mm Motor output (40%ED) 15 KW 11 KW Max. Torque 167 Nm turning speeds 35 - 6000 U/min spindle nose A2-5 Motor output (40%ED) ca. 7,5 KW Power (continuous operation) 5,5 KW Max. Torque 53 Nm Milling spindle speeds ( driven tools) 20 - 4500 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40% ED) kW Milling spindle power 3,7 kW Numbers of tools 12 (angetrieben) Tool cross section (outside) 25 qmm Boring bar- Ø 40 mm Drill- Ø 20 mm Mill- Ø 20 mm Tap- Ø M20 coolant tank 225 l Chuck diameter main spindle 8 '' Chuck diameter counter spindle 6 '' w-axis 585 mm rapid travel W 30 m/min c-axis 555 weight of the machine ca. 4,9 t dimensions of the machine ca. 2,8 x 2 x 1,8 m Special accessories: - Chip conveyor, hinged belt, side ejector - Production package, this package includes Preparation for bar feed Automatic parts catcher (Ø:80mm x L:120mm x 2.5 kg) 15 bar high-pressure coolant system Preparation for chip conveyor (lateral) Signal light (3-colour LED), rectangular C-axis counter spindle 0.0001° Automatic tool eye 8" power chuck Kitag. BR08 & Cyl. SR1566C (HD1) GENERAL MACHINE OPTIONS Air blowing device on the chuck (counter spindle) Transformer for the European market Linear roller guides SD MEMORY I/F(1P) + USB MEMORY I/F(1P) 1 x USB - Memory Interface (1 slot) CE marking CE marking, metric, 50 Hz Counter spindle positioning 0.0001 degrees without C-axis Tool turret with 12 stations Y-axis control ADDITIONAL PROCESS SOFTWARE Smooth restart function / restart mode Set of manuals in electronic form on CD Main spindle motor AC 15 kW (20 hp) 2nd spindle motor AC 7.5kW (20 hp) Main spindle motor AC 7.5kW MAIN SPINDLE C-axis main spindle Input accuracy (contour/index) 0.0001° Mazak standard colour (F white(fine)/S black) Automatic switch-off via circuit breaker trip Double foot switch Hydraulic pressure interlock RFID door interlock Safety foot switch with locking mechanism Safety measures according to worldwide standard Work area lighting Complete coolant system Automatic opening/closing of chuck jaws (main and counter spindle) Feedback of the chuck status (main and counter spindle) Feedback of the chuck status via sensors. 8" power chuck 6" power chuck (counter spindle) Dodswngklspfx Ac Neun Absolute positioning system Synchronous tapping with milling spindle Relocation Detector NC control Mazatrol SmoothEz 15" colour Lcd (touch screen) User macro (common variables: 600 pairs) EIA/ISO package EIA/ISO - input function EIA/ISO - additional functions Bolt line interpolation 3D tool compensation Workpiece coordinate rotation Geometric function Scaling External data input/output Tapping function (G33) Reverse feed rate G93 G37 Tool length measurement Polar coordinate input (EIA) Optional stop Additional workpiece coordinate systems 300 pieces User macro (600 variables) Mazak tapping/drilling cycle EIA/ISO - input function Scaling External data input/output Thr...

Condition: used, turning diameter max. 360 mm turning length 505 mm control Mazatrol SmoothC max. swing diameter over bed 660 mm swing diameter over slide guides max 255 mm bar material dia. max. 80 mm turning speed range - spindle 35 - 4000 U/min max. torque on the spindle 358 Nm x-axis 225 mm rapid traverse X-axis 30 m/min z-axis 605 mm rapid traverse Z-axis 33 m/min spindle nose A2-8'' spindle bore 91 mm spindle hollow 80 mm Milling spindle speeds ( driven tools) 5000 1/min torque on milling spindle max: 47 Nm power capacity - milling spindle 5,5 (40%ED) kW tailstock quill taper MT 5 Travel- tailstock 565 mm Axial pressure max 5,0 Nm Tool turret 1 Numbers of tools 12 (angetrieben) turning tool - shaft cross cut 25 x 25 mm tool taper BMT Required air-pressure 5 / 160 bar / l/min voltage 400 V coolant tank 180 l engine output 18,5 (30min Betrieb) kW Rated power (100% continuous operation) 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 3,6 x 2 x 1,8 m Machine incl. the following special accessories: Chip conveyor on the right side Productivity package C - special according to storage machine This package includes: High-performance coolant system (1.1 kW) Flow rate max. 17.6 l/min Preparation for chip conveyor (lateral) Automatic tool eye STANDARD ACCESSORIES Transformer for the European market Use of linear systems with guide carriage SD MEMORY I/F(1P) + USB MEMORY I/F(1P) 1 x USB memory interface (1 slot) Spindle bore 91 mm Set of manuals in electronic form on CD Mazak standard colour CE marking, metric, 50 Hz C-axis input accuracy 0.0001° NC controlled tailstock Tailstock pressure adjustment Tailstock with fixed quill MK5 SAFETY DEVICES Operator door with interlock switch Double foot switch Hydraulic pressure lock Fully enclosed work area Work area lighting Safety precautions according to global standard COOLANT SUPPLY Grundfos coolant pump type MTA (0.25kW / 7.6L/min) Complete coolant system Automatic switch-off via circuit breaker triggering MESSSYSTEM Absolute positioning system NUMERICAL CONTROL Synchronous tapping with milling spindle Relocation Detector Mazatrol SmoothC 10.4’ colour screen User macro (600 variables) EIA/ISO input function Tool path check in the background Thread cutting function (G33) Polar coordinate input (EIA) Drawing data direct input function Interface for LAN Various tool holders - All dimensions, weights and performance data are non-binding - Used machine without warranty - Dedpfsv Dxw Rsx Ac Njun

Condition: like new (used), Year of construction: 2018, clamping force: 2,300 kN, Equipment: documentation/manual, Toshiba EC230SXII – 230 ton Injection unit i8 – Screw 50 mm CLAMPING UNIT Clamping force: 2250 kN (230 t) Tie bar spacing (H×V): 610 × 560 mm Platen size (H×V): 880 × 830 mm Moving platen stroke: 550 mm Max daylight: 1230 mm Mold height min–max: 250–680 mm Ejector force: 49 kN (5.0 t) Ejector stroke: 130 mm INJECTION UNIT – 50 mm Screw diameter: 50 mm Shot volume: 392 cm³ Shot weight PS: 361 g Shot weight PE: 286 g Max injection pressure: 200 MPa Max holding pressure: 200 MPa Dodpfxsyhpi As Ac Noun INJECTION SPEED / RATE STD speed: 250 mm/s STD rate: 490 cm³/s HIGH DUTY speed: 160 mm/s HIGH DUTY rate: 314 cm³/s HIGH SPEED speed: 350 mm/s HIGH SPEED rate: 687 cm³/s PLASTICIZING Plasticizing capacity PS: 160 kg/h Screw speed: 255 rpm Screw torque: 1421 Nm Nozzle contact force: 29.4 kN (3.0 t) ELECTRICAL Main breaker STD: 125 A Main breaker HIGH DUTY: 125 A Main breaker HIGH SPEED: 175 A Transformer: 75 kVA Heater capacity: 15.2–16 kW DIMENSIONS & WEIGHT Length: 6.4 m Width: 1.7 m Height: 2.0 m Weight: 9.9 t

Condition: excellent (used), Year of construction: 2015, Machine type: 5-Axis Machining Centre (Simultaneous) Year of manufacture: 2015 Control: HAAS CNC control to DIN 66025 X-axis travel: 762 mm Y-axis travel: 508 mm Z-axis travel: 508 mm Max. spindle speed: 15,000 rpm Spindle motor power: 22.4 kW (vector drive) Spindle taper: SK 40 (DIN 69871) Max. torque: 122 Nm (at 2,000 rpm) Table dimensions: ∅ 630 x 500 mm Max. workpiece weight: 300 kg Number of simultaneously controlled axes: 5 C-axis rotation range: 360° continuous B-axis swivel range: -35° / +110° Rapid traverse rates (X, Y, Z): 30.5 m/min Tool magazine (positions): 40+1 (side-mounted) Coolant system capacity: 284 litres Machine weight: approx. 8.2 t Cooling systems: - Through-Spindle Coolant (TSC), 21 bar - Programmable coolant nozzle (P-COOL) - Additional coolant filtration system (25 μm) - Hand rinsing gun with coolant Measuring and probing systems: - RENISHAW probing system (WIPS-R) Dusdpfx Aceyhpfde Non - Work probe - Tool measurement system Chip management: - Hinged belt chip conveyor Software & Control: - High-Speed Machining (HSM) - Ethernet interface - Macros - Coordinate rotation and scaling

Condition: excellent (used), machine/vehicle number: 77WSX22305E5A-135, BENZ - MONO WSX 05 - 90° angle head Mounting: HSK-A100 Collet: ER25-A (clamping range: 0.5–16 mm) Dsdoyhpbfspfx Ac Nsun Max. torque: 30 Nm Max. speed: 8,000 min⁻¹ Transmission ratio: 1:1 Angle head: 360° adjustable Weight: approx. 8 kg The angle head was used on a MAG HÜLLER HILLE - NBH6+ but can also be adapted or fitted to other machines.

Condition: ready for operation (used), Year of construction: 2018, This 4-axis BIESSE Rover S FT 1536 was manufactured in 2018. It features a robust gantry design, a working area of 3765 × 1560 mm, and a main spindle power of 13.2 kW. Equipped with a HSK-F63 tool holder system, 12-position disc-type tool changer, and a BIESSE BH 10 drilling unit with comprehensive vertical and horizontal drilling capabilities. It also includes a grid vacuum table, dual 500 m³/h vacuum pumps, and is DXF file compatible. Contact us for more information about this machine. • Weight (kg): 3000 • Main Spindle: 1 spindle, 13.2 kW • Axes: 4 • Working Area (X × Y): 3765 × 1560 mm • Torque Support: 4th axis (C-axis rotation) • Tool Holder System: HSK-F63 • Tool Change Positions: 12 (disc-type changer) • Tool Length Measurement: Yes • Drilling Unit: Vertical Drills: 10, Horizontal Drills: 4 (X direction), 2 (Y direction) • Grooving Saw: In X direction • Vacuum Table: Grid table • Vacuum Pumps: 2 × 500 m³/h • Extraction System: Sweeping arm discharge device • Lubrication: Automatic • Air Blowing Device: Yes • Control System: Interface with DXF file compatibility • CE Marked: Yes • Tools, tool holders, aggregates, and mechanical clamps shown in photos or videos are not included in the scope of delivery. Dsdpfx Ajx D Iqvsc Nsun

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 11160000593, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 18,000 rpm, table diameter: 630 mm, TECHNICAL DETAILS Duedpfxsyhnxvj Ac Nsn Travel X-axis: 600 mm Travel Y-axis: 700 mm Travel Z-axis: 600 mm Number of simultaneous axes: 5 Table diameter: 630 mm Number of T-slots: 9 Distance between T-slots: 63 mm T-slot width: 14H7 mm Centering bore diameter: 50H6 mm Max. spindle speed: 18,000 rpm Feed rate longitudinal: from 20 mm/min to 15,000 mm/min Feed rate transverse: from 20 mm/min to 15,000 mm/min Feed rate vertical: from 20 mm/min to 15,000 mm/min Rapid traverse: 40 m/min Max. workpiece height: 1,000 mm Max. workpiece diameter: 920 mm Max. workpiece weight on table: 500 kg Table indexing (B-axis): 360° Swivel angle (A-axis): +45/-30° Holding torque A-axis: 3,866 Nm Clamping torque C-axis: 6,008 Nm Max. torque: 2,650 Nm Number of tools: 180 Tool diameter: 80 mm Diameter with adjacent tool pockets empty: 160 mm Max. tool length: 350 mm Max. tool weight: 10 kg Tool holder: SK 40 DIN 69871 MACHINE DETAILS Measuring system resolution: µm Compressed air connection: 5 - 8 bar Power supply: 50 Hz 3x 400 Volt Total power requirement: 44 kVA Noise level: 80 dB(A) Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 2,628 mm Machine weight approx.: 7,500 kg EQUIPMENT Set of tool holders SK 40 approx. 150 pcs High-pressure coolant system 40 bar Coolant through the spindle (CTS) Renishaw tool probe Lighting Rotating viewing window Electrical cabinet air conditioning unit

Condition: ready for operation (used), Year of construction: 2010, operating hours: 27,052 h, functionality: fully functional, machine/vehicle number: 11680001673, travel distance X-axis: 560 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, controller model: HEIDENHAIN iTNC 530, spindle speed (max.): 12,000 rpm, The machine spindle was replaced in 2017! Machine equipped with KUKA loading robot! TECHNICAL DETAILS X-axis travel: 560 mm Y-axis travel: 600 mm Z-axis travel: 600 mm Number of axes: 4 Maximum workpiece weight on table: 500 kg Maximum workpiece height: 850 mm Maximum workpiece diameter: 630 mm Table rotation speed: 40 rpm Table clamping torque: 1,580 / 2,300 Nm Maximum torque: 1,550 Nm Pallet changer dimensions (L x W): 400 x 400 mm Maximum pallet changer workpiece weight: 500 kg Number of tools in the tool changer: 120 Maximum tool diameter: 80 mm Tool diameter with free adjacent slots: 160 mm Maximum tool length: 400 mm Maximum tool weight: 12 kg Tool holder: HSK 63 DIN 69893 Form A Spindle diameter: 225 mm Spindle speed: 0 – 12,000 rpm Feed speed: 0 – 60,000 mm/min Rapid traverse: 60 m/min Maximum feed force: 10 N MACHINE DETAILS Control system: HEIDENHAIN iTNC 530 Spindle drive power: 20 kW Connection: 50 Hz 3x 400 V Total power requirement: 58 kVA Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,700 x 2,700 mm Machine weight: approx. 9,700 kg Operating Hours Power-on time: 75,886 hours Operating time: 27,052 hours EQUIPMENT Loading robot KUKA High-pressure coolant system Coolant through spindle (IKZ) 40 bar Spindle taper air purge Dedpfxoyhnpze Ac Noun Probe Chip conveyor Pallet storage rack Setup stations (number): 60 (3x20) Lighting Rinse gun Rotating viewing window Electrical cabinet air conditioner Foot pedal Status indicator lamp