Used Torque Tester for sale (2,622)

Condition: good (used), Year of construction: 2005, functionality: fully functional, Technical details x-travel 1040 mm y-travel 600 mm z-travel 500 mm Control Heidenhain iTNC 530 table surface area 1250 x 600 mm table load 600 kg tool taper SK 40 spindle turning speed range 1 - 8000 U/min max. torque on the spindle (S1/S6) 140/200 Nm feed range 40000 mm/min rapid power traverse in X-and Z direction 70 m/min rapid motion - y-axis 40 m/min spindle drive (100/40 % ED) 13/19 kW total power requirement 39 kVA weight of the machine ca. 8,9 t Additional information Operating hours 70278 Spindle hours 23335 Please note the enclosed geometry measurement report with the tool pull-in force measurement. Equipment: CNC control Heidenhain iTNC 530 Ltsdpfex Nnxgsx Affja Electronic handwheel Heidenhain HR 410 Motor spindle with increased torque Direct path measuring system in Y-Z axis Preparation for measuring probe 30-station tool changer, tool diameter 100/140 mm, length 300, weight 7 kg ROTOCLEAR Production package 2 Internal coolant supply through the spindle 20 bar Coolant system with paper belt filter Cooling device blown air through the spindle center selectable via M function Chip conveyor Bed flushing Linear drive in the X-axis Operating mode 4 Program check with extended manual intervention Machine documentation Transport dimensions: 4100 x 2500 x 3000 mm

Condition: used, Year of construction: 2018, Machine type: CNC Turning Center Model: NLX3000Y/200 Manufacturer: DMGMORI Control: CELOS Year of manufacture: 2018 Location: Germany Swing diameter over bed: 894 mm Swing diameter over cross slide: 808 mm Max. turning diameter: 420 mm Standard turning diameter: 366 mm Max. turning length: 2,123 mm Max. bar capacity: 90 mm Travel range X-axis travel: 280 mm Z-axis travel: 2,170 mm Spindle Max. spindle speed: 3,000 min⁻¹ Spindle nose: JIS A2-8 - Main spindle reinforced 30/25 kW - Hollow clamping cylinder for BB212 on main spindle - Jog operation at the chuck - Double foot switch with protective cover - 12-station turret with driven tools and higher torque - Chip conveyor - Interface for high-pressure coolant system, 70 bar - Knoll KF110/700 compact filtration system, 7.0 MPa - Coolant gun - Compressed air blow-off system for tool cutting edges - AFS 1600 oil mist extractor unit - Programmable tailstock (drag type) - Double foot switch for the tailstock - Automatic door for machining area (/2000) - X-axis linear scale - Alternating spindle speed - Multi-threading cycle - Automatic travel monitoring of the clamping cylinder Lodpfx Ajx Nh N Esffjta (Errors and omissions in the technical data and specifications excepted)

Condition: good (used), Year of construction: 2019, operating hours: 8,173 h, functionality: fully functional, turning length: 12,025 mm, turning diameter: 480 mm, spindle speed (max.): 3,250 rpm, travel distance X-axis: 308 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,240 mm, bar passage: 102 mm, overall weight: 7,200 kg, controller model: DMG MORI SLIMline Multi-Touch Control, control type: CNC control, CLX 550 V6 2-axis universal lathe with driven tools incl. C-axis, Y-axis, and counter spindle Standard equipment: 1. Ergonomic DMG MORI SLIMline operating panel 2. Main spindle A2-8 with AC motor, drive power 22 / 33 kW (100/40% DC), 3,250 rpm 3. Counter spindle A2-6 with ISM 52 synchro, drive power 13 / 14 kW, torque 171.5/192 Nm (100/40% DC), 5,000 rpm 4. 12-position servo turret, VDI 40 mounting with Trifix® precision interface and 12 driven tool stations per DIN 5480 5. Y-axis ± 60 mm 6. Chip tray 7. Hollow clamping device, max. bar capacity D 80 mm 8. Electronic handwheel Drive power (100%/40% DC) 22/33 kW Hydraulic clamping device with bar capacity diameter 102 mm, surcharge Differential pressure clamping for main spindle Bar package & interface option includes: - Workpiece unloader for parts up to D 80 x 200 mm long (D 100 x 200 mm with option C-B7000G) Max. workpiece weight 4 kg - Interface for bar loader or bar feed unit (DMG MORI standard interface) - Hinged belt chip conveyor instead of chip tray - 4-color signal tower Recommended additional option: Double cartridge filter for coolant, especially for production environments with very high chip volumes. Automatic workpiece ejector for counter spindle with internal coolant supply for clamping device flushing. Note: Option recommended for machines with workpiece unloader option. External flushing for counter spindle, option recommended for machines with automation Differential pressure clamping for counter spindle Tailstock function for counter spindle, mechatronic force control programmable in the software (force 250-600 daN), including foot switch (only for CLX 550 V6) Ltjdpfjxx Tcmjx Affoa Direct measuring system for X- and Y-axis (option only available for V4 and V6 versions) Manual tool measuring device in the working area, brand Marposs Documentation according to 'Technical Documentation Delivery List' – included in the machine price. Software option: DXF import for converting DXF files into NC programs (SIEMENS control) Tool monitoring system: Easy Tool Monitor 1.0, monitors each cutting operation against a set limit. Simple learning function for determining the monitoring limit per tool and cutting operation; manual adjustment/correction possible. Technology cycle: Alternating speed (turning) for vibration-sensitive applications Note: We offer flexible financing solutions for all machines as well as a professional relocation service. Dismantling, transport, and professional installation – everything from a single source. Billing based on individual terms and duration. Contact us for your personal offer.

Condition: used, Used Becomix model Beco Mini Lab homogenizing mixer.  Manufacturer: Becomix. Capacity: Working capacity maximum of 5 Litres approximately Dimensions: 820mm x 820mm x 1250mm high approximately Pressure: -1/+1 Bar maximum working pressure  internally; 4 Bar maximum working pressure of the external jacket Conical welded bottom with a clamped dish top. Pressure and vacuum sealed by a double acting axial seal rings and cooled by barrier water flow. Lodpfx Ajx Nixueffsta Bottom entry homogenizer: Power 1.55kW Torque 2.5Nm Weight: Estimated: Kg250.0 Dimensions: 820mm X 820mm

Condition: like new (used), Year of construction: 2017, operating hours: 23,043 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 375 mm, controller manufacturer: Heidenhain TNC 640, workpiece weight (max.): 250 kg, spindle speed (min.): 20,000 rpm, spindle motor power: 35,000 W, Year of construction: 2017 CNC controller: Heidenhain TNC 640 Axes X-axis travel mm: 400 Y-axis travel mm: 400 Z-axis travel mm: 375 C-axis degrees: 360º (0,001) B-axis degrees: -5 / +110º Milling/turning table nc: Number of pallets: 30 places with robot Table dimensions mm: 450x400 Ledpfxjx Nhraj Affjta Max. workpiece weight kg: 250 Spindle Spindle speed rpm: 20000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/86 Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 60 Tool changer: Double gripper Equipment Chip conveyor Infrared probe Rinsing gun NC swivel rotary table Preparation for the use of the 3D quickSET Laser tool measurement for measuring tool length and diameter Direct measuring system XYZ Spindle active cooling unit MPC – Machine Protection Control Prepareted for automatation via M65 Paper band filter Machine running times Under power: 43989 Spindle Working: 23043

Condition: ready for operation (used), Year of construction: 2006, operating hours: 32,790 h, functionality: fully functional, travel distance X-axis: 2,032 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, table load: 3,000 kg, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel X-axis: 2,032 mm Travel Y-axis: 750 mm Travel Z-axis: 750 mm Max. workpiece height: 870 mm Lsdsx Ng Nwspfx Affota Max. table/workpiece load: 3,000 kg Table width: 800 mm Table length: 2,240 mm Spindle speed: 40 – 6,000 rpm Spindle taper: SK 50 Standard spindle power: 18.5 kW Standard torque: 759 Nm Spindle power (optional): 26 kW Torque (optional): 1,067 Nm MACHINE DETAILS Control unit: MAZATROL Dimensions & Weight Dimensions (L x W x H): 5,685 mm x 4,096 mm Weight: 14,000 kg Operating hours: 32,790 h

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Technical details swing over bed 730 mm centre distance 3000 mm control Heidenhain MANUALplus4110 weight of the machine ca. 6,5 t dimensions of the machine ca. 7400 x 2100 mm Additional information Very well-maintained cycle lathe with only 15652 operating hours. Working area: Center distance 3000 mm Swing diameter over bed 730 mm Swing diameter over cross slide 450 mm Bed width 480 mm Main spindle: Spindle mount according to DIN 55027 size 11 Spindle bore 130 mm Spindle diameter at front bearing 170 mm Spindle taper 1:20 Tap in center sleeve MT 6 Main drive: AC drive with 2-stage ZF gearbox (automatic shifting gearbox) Drive power (100/60% duty cycle) 22/28 kW Total speed range 1 - 2200 rpm Ltsdpfjx Nm Utjx Affea Maximum spindle torque: approx. 2200 Nm X-axis (cross slide) performance data: Maximum travel: 400 mm Feed force: 14 kN Speed: 4 m/min Z-axis (bed slide) performance data: Feed force: 18 kN Speed: 7 m/min Max. workpiece weight: Between centers without steady rest: 2000 kg With one steady rest: 2200 kg With two steady rests: 2500 kg In the chuck: 750 kg Tailstock: Quad diameter: 115 mm Quad stroke: 225 mm Quad taper: MK 6 Equipment and accessories: Heidenhain MANUALplus 4110 CNC control SCHUNK ROTASplus 400-102 3-jaw manual chuck 2 steady rests PARAT tool holder Chip conveyor Coolant system Work area enclosure with two sliding doors. Machine length 5700 mm, with swarf converyor 7400 mm Machine width 2100 mm

Condition: used, Year of construction: 2021, Exhibition unit (little used) Unit for cutting soft materials such as honeycomb cores, acoustic elements and fabrics using oscillating movements Processing options: Cutting straight or radial cutouts Typical areas of application: • Textiles: Cutting fabrics or textiles (e.g. leather, felt, etc.) • Cutting honeycomb cores for doors, staircase construction, exhibition stand construction, caravan construction • Acoustic elements: Cutting polyester, foam or other sound-absorbing materials • Aviation, boat building, aerospace: Cutting honeycomb cores Technical specifications Max. input speed: 6,000 min-1 Max. output speed: 9,000 min-1 Gear ratio: 1:1.48 Max. torque: 8 Nm Permissible operating temperature: max. 85°C Position of the torque arm to the tool: 360° Processing angle: 0° Number of tool outputs: 1 / fixed Lubrication: Grease / lifetime grease filling Amplitude: 4 mm Frequency: 150 Hz Storage location: Garbsen Lodpfxsvvi Iqe Affjta

Year of construction: 1984, condition: ready for operation (used), travel distance X-axis: 15,900 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 790 mm, overall weight: 23,000 kg, number of axes: 3, General Data Lodpfx Ajx I S Rqoffsta Machine weight 23000 kg Main Drive Number of axis 3 Movement X-Axis Movement 15900 mm Z-Axis Movement 790 mm Y-Axis Movement 500 mm This 3-axis GRABENER Single-sided sheet metal edge milling machine was manufactured in 1984. It features a powerful 50 kW DC motor, spindle speeds up to 500 rpm, and a maximum torque of 2,000 Nm. The machine offers extensive travel capabilities with 15,900 mm on the x-axis and rapid traverse rates up to 8,000 mm/min. Ideal for precision milling with a swivel range of +/-45°. Contact us for more information about this machine. Application Types Other Sheet Metal Machinery

Year of construction: 2023, condition: new, We are exclusive agent and distributor for China top class machine tools with stocks and Maintenance team. Here is Shenyang SYMG slant bed CNC turning lathe HTC 50P. Product description: 1. High rigidity feed system: In order to compensate for the elongation of the lead screw caused by the rise of the working temperature, and ensure the positioning accuracy of the lead screw and the system rigidity of the ball screw when it is used, the lead screw is pre-tensioned and pre-tensioned according to a certain thermal elongation before assembly to eliminate the impact of temperature rise on the accuracy. 2. High rigidity servo tool rest: Adopt servo 12-position tool rest. The turret adopts servo-driven hydraulic locking mode, and the turret is silent, high speed, large torque and fast tool change. The locking cylinder inside the turret is matched with a precise concave and convex tooth positioner, which has high positioning accuracy for tool change, can convert the tool forward and backward, and can bear heavy cutting. 3. Slide rail configuration: HTC50 series optional sliding guide rail structure, higher rigidity, suitable for re-cutting, etc. Max. swing diameter 700/670/670mm Max.turning diamter ShaftΦ500/ DiscΦ550mm Max.swing diameter over slide 500mm Max.working length 1000/1500/2000mm Spindle hole diameter 104mm Spindle speed 35-3000 rpm Chuck diameter 12" X axis travel 320mm Ltedpfoi Ewi Dsx Affja Z axis travel 1050/1550/2050mm 12 position turret. With FANUC system. This series SHENYANG CNC Slant bed lathe also with related types: HTC 40P, HTC40B, HTC 4050S, HTC 50E, HTC 50B, HTC 50P Just contact us if any further details are required.

Condition: used, Year of construction: 2015, x-axis 1250 mm y-axis 840 mm z-axis 550 mm control Siemens 840D turning speed range - main spindle 12000 min/-1 drive capacity - main spindle 22,5 kW Torque max. 140 Nm Number of tools 24 St. max. tool length 320 mm spindle taper HSK 63 Number of working hours 56000 h spindle hours 17500 h weight of the machine ca. 9,7 t This machine can be viewed under power by appointment and is in our estimation in very good condition. Furnishing: - IKZ - chip conveyor - Glass measuring rods in all axes - automatic door Lsdpfx Asx I Sh Aeffota - Swivel axis with counter bearing, Fibro There are 5 identical machines available. The machines were used for light countersinking and drilling work. Changes and errors in the technical data and information, as well Subject to prior sale!

Condition: used, Year of construction: 2001, turning diameter 400 mm turning length 549 mm control HEIDENHAIN Eltropilot swing over bed 570 mm travel -x axis 220 mm travel -z axis 635 mm main spindle bore 79 mm main spindle speed 25 - 5000 U/min main spindle drive 21 kW max. torque on the spindle max. 240 Nm 120 mm c-axis, speed 100 U/min C-axis Haltemoment 200 Nm C-axis resolution < 0,04 ° sub spindle bore 56 mm sub spindle speed 25 - 5000 U/min sub spindle drive 9 kW max. torque on the spindle max. 72 Nm 90 mm c-axis, speed 100 U/min C-axis Haltemoment 150 Nm C-axis resolution < 0,04 ° feed power X/Z axis 3,5 / 7 Nm rapid traverse X-axis 20 m/min rapid traverse Z-axis 24 m/min tool turret 1 x 12 Stationen number of driven tool stations 12 speed of driven tools 4.000 U/min total power requirement 44 kVA weight of the machine ca. 5,7 t Ledjx I Sfnspfx Affjta dimensions of machine L x W x H 3,65 x 2,03 x 2,1 m Accessories: collet fixture HAINBUCH on main spindle, 3-jaw chuck RÖHM, 140 mmø, on sub spindle, 3 collets, chip conveyor, coolant with band filter device

Condition: excellent (used), machine/vehicle number: 77WSX22305E5A-135, BENZ - MONO WSX 05 - 90° angle head Mounting: HSK-A100 Collet: ER25-A (clamping range: 0.5–16 mm) Max. torque: 30 Nm Max. speed: 8,000 min⁻¹ Transmission ratio: 1:1 Angle head: 360° adjustable Weight: approx. 8 kg Lsdpfx Afsx I N Erofjta The angle head was used on a MAG HÜLLER HILLE - NBH6+ but can also be adapted or fitted to other machines.

Condition: used, Year of construction: 2001, Technical details: turning diameter: 500 mm turning length: 1000 mm control: Siemens 840 D spindle: 42 / 28 kW spindle turning speed - stepless: 31 - 4000 1/min max. torque on the spindle: 345 Nm c-axis: 360000 x 0,001° feeds -stepless-: mm/min rapid traverse: mm/min turret stations / rotary tool stations: 12/12 VDI 40 RPM of rotary tools: 2000 1/min diameter of quill: 90 mm quill stroke: 80 mm Lsdpfjx I Ir Rox Affjta tailstock quill taper ISO: SK 30 Tailstock Travel: 600 mm Power rotary tools: 3,5 kW : 22,5 Nm Rotary tool holders: 4 ax./ 4 rad. spindle passage: 66 mm total power requirement: 30 kW weight of the machine ca.: 7,5 t dimensions of the machine ca.: 8x 3 x 4 m Accerories Power Chuck Programmable Tailstock Chip conveyor

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor Ltedpfx Ashu Hwqeffea -Manufacturer: SEM, Brushless servo motor type HR142G6-88S -Speed: 6000 rpm -Voltage: 530 V -Torque: 21 Nm -Shaft: Ø 24 x 50 mm -Brake: 24 VDC 40 Nm -Number: 2 motors available Price: per piece -Dimensions: 425/142/H174 mm -Weight: 23.8 kg/pc.

Condition: ready for operation (used), Year of construction: 2019, functionality: fully functional, spindle speed (max.): 4,000 rpm, travel distance Y-axis: 50 mm, bar passage: 77 mm, counter spindle speed (max.): 4,000 rpm, distance between spindles: 1,300 mm, Original purchase price of the machine was over €500,000! Turning-milling center equipped with 2 turrets including milling drive and 2 Y-axes! TECHNICAL DETAILS Spindle distance: 1,300 mm Y-axis travel range: ± 50 mm Main spindle (BigBore 77) Main spindle speed range: 0 - 4,000 rpm Main spindle drive power: 29 kW Main spindle nose (DIN 55026): A2-8 Main spindle bar capacity max.: 77 mm Max. torque: 250 Nm Main spindle draw tube connection: M85 x 2 Counter spindle (BigBore 77) Counter spindle speed range: 0 - 4,000 rpm Counter spindle drive power: 29 kW Counter spindle nose (DIN 55026): KK 8 Max. torque: 250 Nm Max. chuck diameter: 250 mm Counter spindle draw tube connection: M85 x 2 BMT turret (upper right) Max. speed BMT turret (upper): 12,000 rpm Max. drive power BMT turret (upper): 10 kW BMT turret (lower) Max. speed BMT turret (lower): 12,000 rpm Ledsx Iz U Sjpfx Affeta Max. drive power BMT turret (lower): 10 kW EQUIPMENT Hollow clamping cylinder including draw tube Part ejector Through-spindle coolant for sub spindle Sinumerik 840D-sl/OPERATE CNC control 22" multi-touch display IPC with 240 GB SHOPTURN conversational programming USB interface Network drive / Ethernet 3D simulation 2x 12-position BMT tool turrets C-axis for main and counter spindle TRANSMIT Software Chip conveyor Minimum quantity lubrication Control cabinet air conditioning unit Hydraulic unit Machine lamp 230 V power socket at the operator panel 5 leveling elements Documentation

Condition: used, Year of construction: 1998, controller manufacturer: Siemens, controller model: 840D, _____ Description: Year of manuf. : 1998 Control : Siemens 840D Speed : 15000 rpm Movement X/Y/Z : 800/600/500 mm Tool holder : SK40 Lsdpfsx Iyqfox Affeta Mainspindle: Speed:15.000 rpm Power (ca.):15 kW Torque (ca.):130 Nm Taper:SK 40 NC-Swivelroundtable: A-Axis:+90°/-90° C-Axis:360° Clampingsurface:ø280 mm Tableloading (max.):300 kg In general: Toolmagazine:87 stations Rapid travers in X/Y/Z:35 m/min Equipment/Accessory: Positionsensor:Direct in X/Y/Z Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with Filter and Highpressure Workpiecemeasurement:Interface Infrared Touchprobe (Renishaw) prepared Toolbreakagecontrol:Laser Oilmistseparation:Mechanical extraction, Jakob Handte OE-D Setup operations:Electronic handwheel Further Equipment:Rinsing pistol

Condition: good (used), Year of construction: 2010, functionality: fully functional, overall weight: 375 kg, load capacity: 3 kg, For sale is a stand-alone handling machine of the Engel brand and type ERC 13/12-F The handling unit is ready for immediate use and fully functional after assembly Technical data Year of construction: 2010 Max. handling weight: 3.5 kg X-stroke: 400 mm Y-stroke: 1,000 mm Z-stroke: 2,240 mm Y-axis: Single stroke B-axis drive: Pneumatic B-axis torque: 5 Nm Servo axes: 3 Pneumatic axes: 2 Compressed air circuits: 2 Valve positions: 6 required DI(UEK): 8 Ljdpfx Ajvgc Skoffsta Stand height: 375 mm Connection data: 3*400 V /50HZ/16 A Rated current: 10,000 A Shelf height 900-1200 mm (depending on installation height) On request, transportation and loading can be arranged at extra cost. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: used, Year of construction: 2001, functionality: fully functional, Control: GE FANUC Series 18i-T Travel range X-axis: 570 mm Working stroke X-axis: 250 mm Travel range Z-axis: 200 mm Swivel diameter: 260 mm Max. turning diameter: 220 mm Max. workpiece length: 100 mm FORKARDT 3QLC 250-72 Z8 S12 power chuck Max. spindle speed: 4,500 rpm Main drive power, 100/40% duty cycle: 15/22 kW Torque 100/40% duty cycle: 202/303 Nm Rapid traverse speed in X: 60 m/min Ltedpfx Asx I N Dheffja Rapid traverse speed in Z: 30 m/min Standard automation with 12 - 18 pallets Tool carrier with driven tools, 12 stations Max. speed of driven tools: 6,000 rpm Includes various driven tools and chip conveyor Dimensions without chip conveyor (LxWxH), approx.: 2,720 x 1,500 x 2,400 mm Weight approx.: 6,500 kg

Condition: used, mileage: 70,800 km, power: 324 kW (440.52 HP), first registration: 11/1982, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: green, gearing type: mechanical, total width: 2,500 mm, total height: 3,600 mm, Equipment: all wheel drive, crane, Heavy-duty all-wheel drive 8x8 tractor unit for heavy trailer loads, recovery operations, etc. Equipped with WSK torque converter transmission, rear trailer load capacity of 100,000 kg, front coupling for shunting, 2 x Rotzler recovery winches each with 200 kN (40,000 kg) pulling force and approx. 50 m cable length, 1 x Rotzler self-recovery winch with 80 kN (8,000 kg) and approx. 55 m cable length, 1 x Rotzler auxiliary winch for reeling out the two recovery winch cables with 6 kN (600 kg) and approx. 100 m cable length. Fitted with 1 x Palfinger loader crane PK 8200A, lifting 3,150 kg at 2.5 m and 970 kg at 7.7 m. Platform length approx. 3,650 mm, side wall height approx. 680 mm, cargo area for ballast and recovery equipment, approx. 13,000 kg steel and ballast weight, climbing ability at 20% incline: approx. 110,000 kg. Fuel tanks: approx. 400 + 210 liters, 10-cylinder turbo water-cooled engine, fording depth: 800 mm. Top condition. Vehicle may have advertising stickers and/or lettering. Ltedpfxex Ayy To Affsa

Condition: used, Year of construction: 1998, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 550 mm, rotational speed (max.): 12,000 rpm, overall weight: 7,500 kg, For sale: CNC 5-Axis Machining Centre, manufacturer DMG, model DMU 60 P The machine is fully operational and ready for immediate use. In 2021, a new spindle was installed, and all required maintenance has been carried out. History: 2019: New ball screw (KGT) 2021: New spindle 2022: Single-shift operation 2023: Occasional job orders 2024: Taken out of operation but remained connected to power 12/2025: Dismantled, cleaned, and stored Technical Specifications: X travel: 600 mm y travel: 650 mm z travel: 550 mm Control unit: Heidenhain TNC 426 Spindle speed: max. 12,000 rpm Spindle drive power: 15 kW Max. torque: 130 Nm Ltjdpfx Aewbhq Heffsa Tool holder: SK 40 Table diameter: 630 mm Max. table load: 500 kg Number of tool pockets: 60 positions Max. tool length: 350 mm Rapid traverse (X/Y/Z): 24 m/min Feed rate: 20 - 10,000 mm/min Total connected load: 44 kVA Space requirements: approx. 7.0 x 6.0 x 2.7 m Machine weight: approx. 7.5 t Please note: Vices or clamping fixtures are not included in this offer. Upon request, we can organise transport and loading, at an additional cost. Europe-wide service available. All prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team is happy to assist you. Trade-in or exchange possible! Machinery Purchase / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your manufacturing needs? Or are you looking to sell yours? For more information or contact options, please visit our website.

Condition: used, Year of construction: 2001, functionality: fully functional, Control: GE FANUC Series 18i-T Travel range X-axis: 570 mm Working stroke X-axis: 250 mm Travel range Z-axis: 200 mm Swivel diameter: 260 mm Max. turning diameter: 220 mm Max. workpiece length: 100 mm Lodpfjx I N A Rsx Affota FORCARDT 3QLC 250-72 Z8 S12 power chuck Max. spindle speed: 4,500 rpm Main drive power, 100/40% duty cycle: 15/22 kW Torque 100/40% duty cycle: 202/303 Nm Rapid traverse speed in X: 60 m/min Rapid traverse speed in Z: 30 m/min Standard automation with 12 - 18 pallets Tool carrier with driven tools, 12 stations Max. speed of driven tools: 6,000 rpm Includes various driven tools and chip conveyor Dimensions without chip conveyor (LxWxH), approx.: 2,720 x 1,500 x 2,400 mm Weight approx.: 6,500 kg

Year of construction: 2013, condition: excellent (used), For sale is an automation robot of the brand Yaskawa and the type MH50 together with power cabinet and DX100 control system. The system was built by Krauss Maffei and used on a Netstal injection molding machine to sort parts. Operating manuals for DX100 control and operating and maintenance manuals for MH50 Digital available Technical data MH50: Position Model YASKAWA-MH50 Operating hours: approx. 14.000 Year of construction: 2013 Body: Standing Number of axles: 6 Load capacity: 50 kg repeatability: ±0,07 mm Working range S-axis (rotation): ±180° L-axis (lower arm): +135°, -90° U-axis (upper arm): +251°, -170° Ltedpon E Nhpefx Affja R-axis (hand roll): ±360° B-axis (wrist rotation/bend): +125° T-axis (hand rotation): ±360° Maximum speed S-axis: 3.14 rad/s, 180 °/s L axis: 3.11 rad/s, 178 °/s U axis: 3.11 rad/s, 178 °/s R axis: 4.36 rad/s, 250 °/s B axis: 4.36 rad/s, 250 °/s T axis: 6.28 rad/s, 360 °/s Permissible torque R-axis: 216 Nm B axis: 216 Nm T axis: 147 Nm Permissible moment of inertia (GD2/4) R axis: 28 kgm2 B axis: 28 kgm2 T-axis: 11 kgm2 Weight approx. 550 kg Dimensions: See pictures On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing by appointment possible. Contact us, our team is happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website

Condition: good (used), Year of construction: 2007, operating hours: 14,029 h, functionality: fully functional, turning diameter over cross slide: 270 mm, turning length: 650 mm, turning diameter: 400 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, For sale is a Gildemeister NEF 400 CNC lathe. The machine is in good condition, ready for immediate use, and fully functional. Technical specifications: Year of manufacture: 2007 Control: Heidenhain CNC Pilot 4290 Operating hours: 14,029 h X-axis (transverse travel): approx. 220 mm Z-axis (longitudinal travel): approx. 700 mm Max. turning diameter: approx. 400 mm Max. swing diameter over bed: 400 mm Max. swing diameter over cross slide: 270 mm Max. turning length: 650 mm Spindle bore: 65 mm Speed range: 0 - 4,000 rpm Drive power (100% duty cycle / 40% duty cycle): 12/15 kW Max. torque: 400 Nm Number of tool positions: typically 8 Tool holder: VDI 30 Ljdpswig R Iofx Affsta Tailstock travel: 680 mm Tailstock mount: MT 4 Clamping pressure: approx. 6.8 kN (hydraulic) Space requirement (L x W x H): approx. 2.5 x 1.7 x 1.8 m Machine weight: approx. 2.8 t Chip conveyor included in the offer Accessories such as tool holders are not included in the offer Can be offered separately Transport and loading can be arranged throughout Europe upon request for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us; our team will be happy to assist you. Trade-in or exchange possible! Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE Do you need a high-quality, yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or to contact us, please visit our website

Condition: good (used), Year of construction: 2005, operating hours: 39,256 h, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, total height: 2,800 mm, total length: 7,000 mm, total width: 7,000 mm, rotational speed (max.): 12,000 rpm, overall weight: 12,000 kg, For sale is a machining center by Deckel Maho, model DMC 60 T. The machine is in good condition and ready for immediate use. Technical data: Year of manufacture: 2005 Operating hours: 39,256 Power-on hours: 72,107 X-axis travel: 780 mm Y-axis travel: 560 mm Z-axis travel: 560 mm Control: iTNC 530 Heidenhain Spindle speed range: 20 - 12,000 rpm Main spindle drive power: 28 / 19 kW Max. torque: 125 Nm Tool holder: SK 40 B-axis infinitely adjustable: 150° (-120/+30)° Number of pallets: 2 Pallet size: 630 x 500 mm Max. load: 400 kg Table speed range: max. 30 rpm Number of tool stations: 120 positions Max. tool diameter: 80 mm Max. tool diameter with adjacent pocket empty: 160 mm Max. tool length: 315 mm Max. tool weight: 8 kg Rapid traverse ( X / Y / Z ): 50 m/min Feed rate: 20 - 15,000 mm/min Total power requirement: 64.2 kVA Machine weight: approx. 12.0 t Floor space required: approx. 7.0 x 7.0 x 2.8 m Included in the offer: Documentation, chip conveyor, coolant system, high-pressure coolant 40 bar through spindle, paper band filter, 2-position pallet changer, tool breakage monitoring Accessories such as clamping devices or tool holders are NOT included in the offer. Ljdpfxewtft Nj Affeta Transport and loading can be organised throughout Europe at additional cost upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us; our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website.