Used Tool Changer for sale (37,092)

Condition: like new (used), Year of construction: 2008, amount 1 STK Fgsdpfx Aleuayf Asqsb

Condition: like new (used), Year of construction: 2008, amount 1 STK Fgjdsxgvy Ropfx Alqob

Condition: like new (used), Year of construction: 2008, amount 1 STK Fjdpfxoxgvy De Alqjgb

Condition: like new (used), Year of construction: 2008, amount 1 STK Fgodpfx Alsuaydloqob

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, Universal Milling Machine Deckel FP2 with 3-Axis Active – TNC 111 Digital Readout by Heidenhain, incl. Accessories, Excellent Condition Technical Data: >> Year of manufacture: 1979, Machine No. 2202-10512 Fjdpfxey H Ibce Alqsgb >> Fixed angle table >> Spindle speeds: 25 – 2500 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 2.2 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head adjustable 150 mm on spindle carrier >> Vertical and horizontal quill – SK40 extendable >> Drawbar system M16 >> Weight approx. 1400 kg Equipment and Accessories: >> 3-axis TNC 111 Active digital readout by Heidenhain >> Coolant system >> Central lubrication >> 1 accessory cabinet containing: Collets, tool holders, clamping tools, tailstock, Dividing head with 3-jaw chuck, vise, tailstock, indexing plates, and much more About the Machine: For sale is a Deckel FP2 universal milling machine in excellent condition. The FP2 comes from a state-operated laboratory where it saw only minimal use. It includes an accessory cabinet with a wide range of tools. The machine has very little backlash, and all spindles move smoothly. The geometry is outstanding. Even at maximum spindle speeds, the milling machine runs quietly. On this newer FP2 model, the feed on all three axes is continuously adjustable and each axis has rapid traverse. A major advantage is the active 3-axis digital readout. With the Heidenhain digital control, set dimensions can be entered and the machine will automatically travel to these positions. An oil change has been carried out. The machine has been mechanically and electrically checked. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to view and test the machine under power on site.

Condition: new, Walter Technic Compressor Model: SKTG 5.5 PP Kombo Fgjdpfx Aoy Nlwtelqeb Dryer, Automatic condensate drain, Tank: 500 litres, Pressure: 10 bar, Capacity: 700 litres per minute, Weight: 505 kg.

Condition: good (used), Bending tool, die, upper blade, upper tool, tool for press brake Fjdpfxjd D Hv Nj Alqegb -divided -Dimensions: 31.007.2101 -Height: 86 mm -Length: 2x100 mm -Dimensions: 21.002.01.01 -Height: 155 mm -Length: 2x100 mm -Packaged: in a wooden box -Weight: 11.9 kg

Condition: good (used), Hydraulic Center height 130 mm Distance between centers 400 mm Tablesize 900 x 200 mm Grinding head turnable 360° Grinding spindle speeds 2'200 - 6'400 rpm Misc. accessories Fgedpfjy H Dr Djx Alqob MARCELS MASCHINEN AG

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine Fjdpfxjy Ni Ivs Alqogb ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 1962, Spindle mounting, vertical + horizontal SK / ISO 40 Angular table clamping surface 700 x 285 mm X-axis travel 500 mm Y-axis 200 + approx. 250 mm Z-axis 400 mm Quill stroke approx. 80 mm 18 main spindle speeds 40 - 2000 rpm 18 feed speeds 8 - 400 mm/min rapid traverse 1200 mm/min drive power 2,2 kW dimensions L x W x H 1150 x 1050 x 1650 mm Machine weight 1000 kg Fgedpfxem Uygvs Alqeb Accessories / special features: - Vertical milling head, swiveling R/L - Fixed angle clamping table - Feed + rapid traverse in all axes Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 1992, 1 used, very well-maintained universal tool milling machine with 3-axis digital readout by HEIDENHAIN and infinitely variable speed adjustment Manufacturer: MAHO, Origin Germany Model: MH 1000 Year of manufacture: 1967 / geometrically overhauled in 1992 / 2006 retrofitted with inverter Working area Table size: 1250 x 740 mm Travel range X-axis: 1000 mm Y-axis (vertical): 600 mm Z-axis (cross): 750 mm Fsdpfoygctrjx Alqjgb Manual cross travel of table: 275 mm Working spindle Tool holder, DIN 2079: ISO 40 Quill stroke of vertical spindle: 125 mm Speeds and feeds Speed range: 32 – 1600 rpm, infinitely variable! Feed range X + Z-axis: 10 – 500 mm/min Rapid traverse X + Z-axis: 1.4 m/min Feed range Y-axis: 5 – 250 mm/min Rapid traverse Y-axis: 0.7 m/min Motor power: 5.5 kW Linear measuring system resolution: 0.01 mm Dimensions and weight Dimensions (L x W x H): approx. 2400 x 2400 x 1800 mm Weight: 5500 kg Accessories / Special features: • 3-axis digital readout, HEIDENHAIN VRZ 760 B • Tool holder ISO 40, DIN 2079 • Universal clamping table (can be rotated, tilted, and swiveled) • Infinitely variable speed adjustment with MITSUBISHI A 700 inverter (retrofitted in 2006 with new control cabinet) • Circulating lubrication with oil cooler for the speed gearbox • Headstock with horizontal working spindle ISO 40 • Manual tool clamping with internal thread M16 • Headstock with horizontal working spindle • Central lubrication • Coolant pump Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: as good as new (ex-display), functionality: fully functional, Weinig Servolock cutterhead clamping tool. The ServoLock tool simplifies clamping cutterheads on the spindle like never before. Fodpfx Aey Hrc Rslqjgb

Condition: used, Year of construction: 2008, operating hours: 43,705 h, functionality: fully functional, machine/vehicle number: 192/2008, total height: 2,400 mm, total length: 1,800 mm, total width: 1,930 mm, workpiece weight (max.): 50 kg, spindle speed (max.): 500 rpm, type of input current: three-phase, grinding wheel diameter: 125 mm, overall weight: 3,800 kg, rotational speed (max.): 40,000 rpm, grinding spindle speed: 40,000 rpm, feed rate X-axis: 12 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 12 m/min, travel distance X-axis: 400 mm, travel distance Y-axis: 310 mm, travel distance Z-axis: 305 mm, grinding spindle motor power: 14,000 W, power: 22 kW (29.91 HP), workpiece diameter (max.): 250 mm, grinding diameter: 250 mm, input frequency: 50 Hz, input voltage: 400 V, grinding wheel speed: 500 rpm, year of last overhaul: 2023, number of spindles: 1, number of slots in tool magazine: 12, Equipment: rotational speed infinitely variable, We are offering this used Deckel S22E universal machining center, year of manufacture 2008. Model: S22 Serial number/year: 192/2008 Machine weight: 3700 kg Maximum wheel diameter: 150 mm Rotational speed: 40,000 rpm Wiring diagram: 2292509 S558 Mains voltage: 3P/N/PE 3x400 V Frequency: 50 Hz Nominal current: 25 A Power consumption: 15 kW Spare fuse: 32 A Control voltage: 24 V Suitable for oil-based grinding: Yes Spindle: Supplied with an additional fully overhauled backup spindle Spindle cooling: Equipped with external spindle cooling (MTA TAEevo Tech MINI 10, Year 2017, 486x660x876 mm) Fire suppression system: Kraft & Bauer FB 703 TFT monitor: Needs to be replaced Fjdpfx Aley Nbnnoqsgb If you have any questions or would like more information, please feel free to contact us or call us.

Condition: good (used), Internal item no.: 26039 160x SK40 (DIN 69871) tool holders Including collet chucks, drill chucks, Weldon holders, face mill holders, SK40-MK Dimensions (LxWxH): 80 x 65 x 200 cm Weight: approx. 500 kg The tool holders are in well-maintained condition and can be inspected by arrangement on over 500 m² of heated storage space. Fgedpfxjy Hpqfe Alqsb

Condition: reconditioned (used), Year of construction: 2026, functionality: fully functional, feed length X-axis: 300 mm, feed length Y-axis: 150 mm, feed length Z-axis: 340 mm, travel distance X-axis: 300 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 340 mm, feed rate X-axis: 500 m/min, feed rate Y-axis: 500 m/min, feed rate Z-axis: 500 m/min, quill stroke: 80 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, rapid traverse X-axis: 1 m/min, rapid traverse Y-axis: 1 m/min, table length: 600 mm, table width: 210 mm, total height: 1,750 mm, total length: 1,400 mm, total width: 1,600 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 40 rpm, overall weight: 800 kg, table load: 200 kg, space requirement width: 1,600 mm, space requirement length: 1,400 mm, space requirement height: 1,750 mm, Equipment: CE marking, documentation/manual, The machine was overhauled/partially overhauled by our workshop in 2026 and, in the same process, retrofitted for CE conformity. The machine is in excellent condition. Complete machine in CE standard version. A CE declaration of conformity has been issued for the machine, with FPS Werkzeugmaschinen GmbH assuming responsibility as the manufacturer. As a result, the machine meets the requirements of the German Industrial Safety Regulation (Betriebssicherheitsverordnung – BetrSichV). The year of manufacture therefore corresponds to the date of the CE retrofit. EN ISO 12100, EN ISO 13857, DIN EN 13128:2009-09, EN ISO 13850, EN ISO 13849, EN 60204-1 - New CE switch cabinet (in accordance with current regulations of professional associations) - Safety brake motor: the milling spindle comes to an immediate stop upon reaching zero speed. Control 3-axis – Active – Digital display Spindle speed 40-2000 rpm, geometrically stepped direct-drive gearbox with 18 speed stages for maximum torque and milling performance Feed rate 5 to 500 mm/min, steplessly adjustable Rapid traverse 1.2 m/min Quill Extendable quill, vertical 80 mm, SK40 with M16 drawbar thread, optionally with DECKEL saw thread S20 x 2 Axes X/Y/Z 300/150/340 mm Fodsy I Trpepfx Alqsgb Table Fixed angle table 600 x 210 mm Maximum table load: 200 kg Equipment • Vertical and horizontal spindle • Milling head manually swivelable +/- 90° • Z-axis bellows Options • Chip tray • Machine light • Universal table • Rotary table • Slotting head • Dividing head • Steady rest • and more.

Condition: used, Year of construction: 1996, functionality: fully functional, total height: 2,120 mm, total length: 1,360 mm, total width: 1,965 mm, spindle speed (min.): 5,200 rpm, feed length X-axis: 400 mm, feed length Y-axis: 300 mm, feed length Z-axis: 300 mm, type of input current: three-phase, grinding wheel diameter: 200 mm, overall weight: 1,850 kg, center height: 210 mm, grinding spindle motor power: 1,500 W, workpiece diameter (max.): 400 mm, input voltage: 380 V, We offer this used Schneeberger NORMA NC4 tool grinding machine, year of manufacture 1996. CNC-controlled X Y Z A axes. ISO50 dividing head. Complete with coolant tank and pump. Fgedpfsyw Tz Asx Alqjb If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed Fjdpfx Ajy Hmhuolqsgb • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Condition: used, Acer ‘E’ Mill Turret Milling Machine (Ex College) 2 Axis Newhall Fsdpfx Alsyzfn Aeqogb Spindle Taper R8 Spindle speeds to 60 – 4200rpm Table Size 50 x 10” Table Power Feed Longitudinal 415V Electrics Coolant For sale with Jet Machinery Ltd Jet Machinery Stock No: #79134 Machine Serial Number: 506016 Cost: £2,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, PERFECT Multi-Function Machine JOINTER: - Planing width: 310 mm - Motor power: 3 kW - Max. width: 310 mm - Max. chip removal: 5 mm - Main shaft speed: 5000 rpm - Shaft diameter: 75 mm, 3-knife - Adjustable fence: 0°-45° - Table dimensions: 1300 mm x 310 mm THICKNESSER: - Planing width: 310 mm - Feed speed: 8 m/min - Max. planing height: 180 mm Fsdpey I Efhefx Alqegb PANEL SAW WITH SCORING UNIT: - Motor power: 3 kW - Main blade size: 250 mm x 30 mm - Scoring blade size: 88 mm x 30 mm - Max. cutting height: 65 mm - Max. cutting height at 45°: 45 mm - Main spindle speed: 4050 rpm - Scoring unit speed: 6300 rpm - Dust extraction outlet: Ф 100 - Carriage length: 1500 x 310 mm - Max. rip capacity with side fence: 1400 mm - Cutting width on right side of the fence: 520 mm SPINDLE MOULDER: - Motor power: 3 kW - Spindle diameter: Ф 30 - Fence adjustment: 130 mm - Spindle speeds: 3500 / 5500 / 7000 rpm - Max. cutter diameter: Ф 150 - Max. height: 105 - Dust extraction outlet: Ф 100 DRILLING MACHINE: - Max. drill bit diameter: Ф 16 - Vertical adjustment (up/down): 140 - Lateral adjustment (left/right): - Table dimensions: 161 x 368 mm - Main motor for Jointer, Thicknesser, and Drilling Machine: 3 kW

Condition: excellent (used), functionality: fully functional, I am selling several Erowa clamping systems for the UPC or ITS 50 system. Fgodsy I Dkcopfx Alqsb

Year of construction: 2015, condition: used, Exhibit Storage location: Sonnefeld Fedov Dat Tjpfx Alqsgb

Condition: ready for operation (used), DECKEL FP 2 Tool Milling Machine from Educational Facility - Well-maintained original condition - Travel paths X/Y/Z 400x200x400mm - 3-axis digital readout "NEW" Fodpfx Alsx Hyuhsqjgb - Swivel table – clamping surface 700x350mm - Speed range: 40 - 2000 rpm - Automatic feeds/rapid traverse on all three axes - Tool holder ISO 40 - Vertical/horizontal milling attachment - Vertical head swivels and features a quill for drilling - Coolant system - X-AXIS leadscrew nut "NEW" - Machine feet - Various tool holders - Chip guard - Machine base - Documentation Dimensions: LxWxH 1.5x1.7x1.8 meters / Weight: 1500kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, tool type: HSK 100, We are offering a comprehensive lot of approximately 200 HSK-100 tool holders in various versions for sale. These tool holders come from productive use on a WFL Millturn M 100 and were utilized there for a range of turning, drilling, and milling operations. The inventory includes tool holders from different years of manufacture, approximately from 2006 to 2020. Fgjdpfx Ajy Hfnmslqjb The scope of supply includes tool holders and systems from renowned manufacturers such as BENZ, Gühring, Wohlhaupter, and other established brands. Included are various types, such as milling holders, drilling and boring tools, special holders, adapters, and other HSK-100 tooling devices. The attached photos show the tool holders both in their previous mounted use on the machine or at the operator station, as well as in their current stored condition in our warehouse. This lot is especially suitable for operators of WFL Millturn machines or other comparable machining centers equipped with HSK-100 interfaces. An inspection can be arranged by appointment. Additional detailed photos of individual tool holders, manufacturer markings, or nameplates can be provided upon serious inquiry.

Condition: used, tool diameter 300 mm length 300 mm weight 80 kg Fgedsytx Rtjpfx Alqsb range L-W-H 800x400x750 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Tool holder for SK 40 chucks -made from: Polypropylene copolymer -Impact and scratch resistant, heat resistant -resistant to: mineral oil and various chemicals -Price: complete Fgodpfxodm Supo Alqeb