Used Tool Cabinet for sale (39,047)

Condition: like new (used), Year of construction: 2008, amount 1 STK Hedpfxjxgvzzo Ak Dol

Condition: like new (used), Year of construction: 2008, amount 1 STK Hedpfx Aouaygmok Djl

Condition: like new (used), Year of construction: 2008, amount 1 STK Hsdpfx Aksxgvzhs Dol

Condition: like new (used), Year of construction: 2008, amount 1 STK Hjdpfx Aeuayf Ajk Dsl

Condition: like new (used), Year of construction: 2008, amount 1 STK Hedpfexgvy Rsx Ak Djl

Condition: like new (used), Year of construction: 2008, amount 1 STK Hodpfexgvy Dsx Ak Djl

Condition: like new (used), Year of construction: 2008, amount 1 STK Hedpfx Asuaydlsk Dsl

Condition: excellent (used), Year of construction: 1979, functionality: fully functional, Universal Milling Machine Deckel FP2 with 3-Axis Active – TNC 111 Digital Readout by Heidenhain, incl. Accessories, Excellent Condition Technical Data: >> Year of manufacture: 1979, Machine No. 2202-10512 >> Fixed angle table >> Spindle speeds: 25 – 2500 rpm >> Infinitely variable feed on 3 axes >> Rapid traverse on 3 axes >> Drive power: 2.2 kW >> Spindle brake >> Travel X/Y/Z: 400/220/400 mm >> Vertical milling head adjustable 150 mm on spindle carrier >> Vertical and horizontal quill – SK40 extendable >> Drawbar system M16 >> Weight approx. 1400 kg Equipment and Accessories: >> 3-axis TNC 111 Active digital readout by Heidenhain >> Coolant system >> Central lubrication >> 1 accessory cabinet containing: Collets, tool holders, clamping tools, tailstock, Dividing head with 3-jaw chuck, vise, tailstock, indexing plates, and much more Hedpfxey H Ibcs Ak Djl About the Machine: For sale is a Deckel FP2 universal milling machine in excellent condition. The FP2 comes from a state-operated laboratory where it saw only minimal use. It includes an accessory cabinet with a wide range of tools. The machine has very little backlash, and all spindles move smoothly. The geometry is outstanding. Even at maximum spindle speeds, the milling machine runs quietly. On this newer FP2 model, the feed on all three axes is continuously adjustable and each axis has rapid traverse. A major advantage is the active 3-axis digital readout. With the Heidenhain digital control, set dimensions can be entered and the machine will automatically travel to these positions. An oil change has been carried out. The machine has been mechanically and electrically checked. The Heidenhain digital display makes operation easier and even more precise. Take advantage of the opportunity to view and test the machine under power on site.

Condition: good (used), Bending tool, die, upper blade, upper tool, tool for press brake -divided -Dimensions: 31.007.2101 -Height: 86 mm -Length: 2x100 mm -Dimensions: 21.002.01.01 -Height: 155 mm -Length: 2x100 mm -Packaged: in a wooden box Hodpfxed D Hv Ne Ak Djl -Weight: 11.9 kg

Condition: good (used), Hydraulic Center height 130 mm Distance between centers 400 mm Tablesize 900 x 200 mm Grinding head turnable 360° Grinding spindle speeds 2'200 - 6'400 rpm Misc. accessories MARCELS MASCHINEN AG Hodoy H Dr Depfx Ak Djl

Condition: good (used), Year of construction: 1962, Spindle mounting, vertical + horizontal SK / ISO 40 Angular table clamping surface 700 x 285 mm X-axis travel 500 mm Y-axis 200 + approx. 250 mm Hjdpfx Akem Uygvo Dol Z-axis 400 mm Quill stroke approx. 80 mm 18 main spindle speeds 40 - 2000 rpm 18 feed speeds 8 - 400 mm/min rapid traverse 1200 mm/min drive power 2,2 kW dimensions L x W x H 1150 x 1050 x 1650 mm Machine weight 1000 kg Accessories / special features: - Vertical milling head, swiveling R/L - Fixed angle clamping table - Feed + rapid traverse in all axes Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Year of construction: 1992, 1 used, very well-maintained universal tool milling machine with 3-axis digital readout by HEIDENHAIN and infinitely variable speed adjustment Manufacturer: MAHO, Origin Germany Model: MH 1000 Year of manufacture: 1967 / geometrically overhauled in 1992 / 2006 retrofitted with inverter Working area Table size: 1250 x 740 mm Travel range X-axis: 1000 mm Y-axis (vertical): 600 mm Z-axis (cross): 750 mm Manual cross travel of table: 275 mm Working spindle Tool holder, DIN 2079: ISO 40 Quill stroke of vertical spindle: 125 mm Speeds and feeds Speed range: 32 – 1600 rpm, infinitely variable! Feed range X + Z-axis: 10 – 500 mm/min Rapid traverse X + Z-axis: 1.4 m/min Feed range Y-axis: 5 – 250 mm/min Rapid traverse Y-axis: 0.7 m/min Motor power: 5.5 kW Linear measuring system resolution: 0.01 mm Dimensions and weight Dimensions (L x W x H): approx. 2400 x 2400 x 1800 mm Weight: 5500 kg Accessories / Special features: • 3-axis digital readout, HEIDENHAIN VRZ 760 B • Tool holder ISO 40, DIN 2079 • Universal clamping table (can be rotated, tilted, and swiveled) • Infinitely variable speed adjustment with MITSUBISHI A 700 inverter (retrofitted in 2006 with new control cabinet) • Circulating lubrication with oil cooler for the speed gearbox • Headstock with horizontal working spindle ISO 40 • Manual tool clamping with internal thread M16 Hodpfxeygctrs Ak Djl • Headstock with horizontal working spindle • Central lubrication • Coolant pump Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: as good as new (ex-display), functionality: fully functional, Weinig Servolock cutterhead clamping tool. The ServoLock tool simplifies clamping cutterheads on the spindle like never before. Hsdjy Hrc Rspfx Ak Del

Condition: good (used), Internal item no.: 26039 160x SK40 (DIN 69871) tool holders Hodpfxjy Hpqfo Ak Del Including collet chucks, drill chucks, Weldon holders, face mill holders, SK40-MK Dimensions (LxWxH): 80 x 65 x 200 cm Weight: approx. 500 kg The tool holders are in well-maintained condition and can be inspected by arrangement on over 500 m² of heated storage space.

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque Hsdpfxjy Hmhue Ak Del • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Condition: good (used), Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Dimensions: 20 x 70 mm -Length: 3020 mm Hedpfsd S D Dnjx Ak Dsl -Weight: 22 kg

Year of construction: 2015, condition: used, Exhibit Storage location: Sonnefeld Hsdpev Dat Tjfx Ak Dol

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, tool type: HSK 100, We are offering a comprehensive lot of approximately 200 HSK-100 tool holders in various versions for sale. These tool holders come from productive use on a WFL Millturn M 100 and were utilized there for a range of turning, drilling, and milling operations. The inventory includes tool holders from different years of manufacture, approximately from 2006 to 2020. The scope of supply includes tool holders and systems from renowned manufacturers such as BENZ, Gühring, Wohlhaupter, and other established brands. Included are various types, such as milling holders, drilling and boring tools, special holders, adapters, and other HSK-100 tooling devices. The attached photos show the tool holders both in their previous mounted use on the machine or at the operator station, as well as in their current stored condition in our warehouse. Hodey Hfnmspfx Ak Dsl This lot is especially suitable for operators of WFL Millturn machines or other comparable machining centers equipped with HSK-100 interfaces. An inspection can be arranged by appointment. Additional detailed photos of individual tool holders, manufacturer markings, or nameplates can be provided upon serious inquiry.

Condition: not inspected (used), Year of construction: 2007, We offer 2 pieces of Kelch tool presetters from Kelch as spare parts donors. Hodpfx Ajy Hdn Sek Dol 1. Tranbant 271, year 2000, price €850 1. SIRIUS CR53, year 2007, price €1,250 No further data available – see photos.

Condition: good (used), Tool holder for SK 40 chucks -made from: Polypropylene copolymer -Impact and scratch resistant, heat resistant Hodpedm Supjfx Ak Djl -resistant to: mineral oil and various chemicals -Price: complete

Condition: used, Cito RSP Easy (Perforating tool) is a tool manufactured by Cito, with a format of 520 x 740 mm. Currently stored in Germany, it is suitable for Heidelberg, Komori, KBA, Manroland, Ryobi, and Sakurai machines. It features easy installation and removal, and is sold as seen. The delivery terms are FCA. Format: 520 x 740 mm Equipment: suitable for Heidelberg, Komori, KBA, Manroland, Ryobi, Sakurai as is Hjdpfx Akjwvut Rj Dol Easy installation and removal

Condition: ready for operation (used), Graf wet blasting system, suitable for finishing solid carbide tools. Hodpfoy Ibvpsx Ak Djl

Condition: new, functionality: fully functional, Warehouse clearance of industrial accessories Specialized in spare parts for machine tools, CNC machining centers Siemens 8m, 850, 840C, 840D, Siemens NC motors Rexroth hydraulics and linear motion technology Festo pneumatics, Herion pneumatics Parker hydraulics Brinkmann pumps, pumps from various manufacturers Heidenhain measurement systems, ROD and linear measurement systems Coax coolant valves and sensors Balluff switches and sensors Phoenix Contact Hedpfx Akey Ibgze Djl Römheld clamping devices Gerwah couplings HSK100, HSK63 tool holders Renishaw ABB Round sealing rings, Turcon Glyde seals Wickmann + Siemens fuses Euchner switches, Honeywell limit switches And much more... (not everything is shown in the pictures) Workbenches, drawer cabinets, heavy-duty shelving Final sale price with moderate asking: €950,000 Collection only

Condition: excellent (used), measuring range X-axis: 250 mm, measuring range Y-axis: 380 mm, OCS Alfa-SYS Sara-set 33 Swift tool setting machine in very good condition. Current inspection/test until May 2025. I am including three pieces of fonts with the machine. The machine includes a Dymo Label 450 printer and a mouse with a disc. I am including a book with the machine. Hjdpfx Aev Am Emok Djl

Condition: used, Year of construction: 2011, functionality: limited functionality, machine/vehicle number: 782, Technical characteristics: Measuring Capabilities - Measuring range (Z-axis): 600 mm (≈ 23.6") - Measuring range (X-axis): 200 mm (≈ 7.8") - Max. tool diameter: 400 mm (≈ 15.7") - Snap gauge diameter: Up to 100 mm (optional) Hedsyanf Topfx Ak Del Performance Features - Spindle type: High-precision SK50 spindle with integrated calibration surfaces - Spindle locking: Power-operated brake with 4 × 90° indexing - Image processing: ZOLLER »pilot« software (version 3.0) - Camera: CCD with telecentric lens and 20× magnification - Cutting edge detection: Automatic, including edges >90° - Focus system: Analog focus display with dynamic cross hairs Control & Interface - User interface: Touchscreen with graphical guidance - Manual control: Ergonomic »eQ« single-hand operating handle - Fine adjustment: Electronic control for X and Z axes - Data transfer: RFID tool identification, label printing, and CNC integration Construction & Environment - Frame: Lightweight metal with optimal thermal conductivity - Scales: Heidenhain glass scales for high measurement accuracy - Software options: Tool management, adapter calibration, concentricity/run-out programs - Mounting/Measurement interfaces: # HSK63 # HSK100 # ISO40 # ISO30/BBT30 # BMT55 Machine status: FUNCTIONAL in manual mode only. For optimal performance, overhaul by the machine supplier is recommended.