Used Tomra Reverse Vending Machine for sale (88,170)

Year of construction: 2017, condition: ready for operation (used), General Data Measurements width 2280 Measurements depth 3350 mm Measurements height 2500 mm Ksdsx D Eazepfx Affenf Machine weight 7200 kg Main Drive Number of axis 6 Movement X-Axis Movement 510 mm Y-Axis Movement 970 mm Z-Axis Movement 420 mm V-Axis Movement 210’ A-Axis Movement HSK 63 swivel angle 360 degree B-Axis Movement +/- 20 degree This 6-axis VOLLMER QXD 250 grinding machine was manufactured in 2017. It features a robust 3 Phase 380Volts, 50hz, 8.7KVA power supply and a substantial coolant tank capacity of 310 liters. With a machine weight of 7,200kg and comprehensive axis movement, including a 360-degree swivel angle on the A-Axis and +/-20 degrees on the B-Axis, consider the opportunity to buy this VOLLMER QXD 250 grinding machine. Contact us for more information about this machine. Application Types EDM

Condition: used, Year of construction: 2004, max. module 3 mm max. workpiece diameter 65 mm spiral angle +45/-115 ° control SIEMENS 840 D clamping length max. 320 mm wheel diameter 140 mm weight of the machine ca. 4,8 t dimensions of the machine ca. 3,3 x 3,3 x 2,1 m Ksdpfxsxfwbas Affenf

Condition: excellent (used), Year of construction: 2003, operating hours: 20,200 h, functionality: fully functional, machine/vehicle number: 190332, Equipment: documentation/manual, Injection molding machine 3 colors (horizontal /vertical/ and 3. in L-position with protective housing) The machine can be used as a 2 colour/2K machine and the 3rd can be deactivate immediately available from our warehouse in Hannover Make: Arburg Type: 420C 1000-150/150/60 year of construction 2003 Control: Selogica Hours: 20092 h without turntable +++++clamping unit +++++ Clamping force: 1000 kN / 1000 to. tie bar distance: 420 x 420 mm platen size: 795 x795 mm tool height 300 mm distance platens max. 950 mm ejector 225 mm /66 kN ++++Injection unit 1 (150 unit) ++++ Screw size: 15 mm (high shut-off fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 2 (150cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Injection pressure: 2750 bar ++++Injection unit 3 (60cc unit) ++++ Screw size: 15 mm (highly screwed fixed) Injection volume: 17 ccm Injection weight: 15 gr. Knedpfx Ajgrzh Eoffjf Injection pressure: 2080 bar Extras 2x core pull 1 ALLROUNDER 420 C 1000 - 150 / 150 / 60 fully hydraulic screw injection molding machine mold clamping force 1000 kN voltage 400 V / 50 Hz 1 Vertical injection unit instead of clamping tie bars mounted on carriers for 2nd injection unit, manually operated, working position adjustable between 70 and 250 mm VE-404/02 1 Open nozzle 15 mm low-wear, without heating tape (1.SPE 150) VE-902/00 1 Technology level 2 - servo-controlled Hydraulic system -two control pumps for controlled machine movements, path-dependent, controlled target ramps. The build-up of the tool clamping force programmable + controlled. Clamping force is servo-controlled via second pump. The nozzle contact force programmable. The contact force can be set manually, the value is maintained in a controlled manner. This technology level is a prerequisite for simultaneous movements of the nozzle, ejector and optional core pullers. Including equipment package for "extended travel movements". VE-132/03 1 Technology level 3 Hydraulic system with 3 control pumps for simultaneous movements of the main axes and for faster movements of the secondary axes. For the 2-K machines as hydraulic system for the 2nd injection unit (prerequisite is technology level 2, VE 132/03) VE-130/40 1 heating tape for open nozzle VE-320/00 1 Injection unit 150 for vertical injection into mold partition for 2-component processing VE-136/02 1 position controlled screw with control valve at the injection unit, incl. controlled back pressure, nozzle contact force manually adjustable VE-561/20 1 position-controlled screw with control valve for multi-component machines, incl. controlled back pressure, nozzle contact force manually adjustable - for injection unit 2 VE-561/30 1 injection unit 60 for horizontal injection into mold partition as 3rd injection unit for multi-component processing (L-position) VE-906/00 1 for VE 906/00 injection unit 60 in L-position: unit lowered by 70 mm, incl. special parting line full protection VE-907/00 1 Plasticizing barrel set 15 mm (without nozzle), with advanced feed and pressure reducing valve, in highly wear resistant design 1 Open nozzle 15 mm wear-resistant, without heating band (L-position) VE-909/00 1 Nozzle tip with radius 15 (L-position) VE-910/00 1 Heating tape for open nozzle (L-position) VE-911/00 1 Position-controlled screw for the third injection

Condition: excellent (used), Drill Bit Grinder Farman FC-80N (4-80mm) Grinding capacity: Ø 4 - 80 mm Angle adjustment: 40 - 180º Grinding wheel speed: 2,880 rpm Kedpfx Afox Nkatofenf Grinding wheel: Ø 180 mm Machine weight: 400 kg Machine dimensions (LxWxH): 800 x 1,000 x 1,300 mm Scope of supply: - Documentation - 20x spare grinding wheels

Condition: used, Used automatic machine for lipstick filling. Manufacturer: Cosmatic (IT) Model: SM-2000 Slim Working output up to 2000 pcs/h Device works in silicone mold technology (Long rubbers). Possibility of producing slim lipsticks with an oriented stick. Air cooled. Machine has two refrigeration compressors working alternately. Silicone mold heating by hot air blower (inside) and electrical lamp (outside). Additional heating to prevent the formation of a cone inside the lipstick. Automatic insertion of the stick into the packaging. Automatic screwing station. Manual package loading. Manual capping. Knodpfxox Niyrs Affjf Machine equipped with 2 filling heads and melting/dosing pumps. Machine fully functional and still in use. Regularly serviced. New 2023.

Condition: used, Year of construction: 1991, weight of the machine ca. 1,5 t Kjdpfxex Ni E Io Affjnf ja

Condition: defective spare-parts repository (used), Maho MH 600 W Knodpfx Afjxwpyrofjf from training workshop, exceptionally well-maintained Dimensions Machine depth: 1800 mm Machine height: 2200 mm Machine weight: 3000 kg Table length: 900 mm Table width: 480 mm Travels X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 400 mm

Condition: good (used), TIG welding machine, inverter welding machine, TIG welding machine, inverter welding machine -without hose package -Max. Welding power: 250 A. -Air cooled -Incl. Ground cable -Gas valve Knodpfodzwwnox Affef -Dimensions: 370/720/H870 mm -Weight: 52 kg

Condition: used, What are Presale Items at Second Owner? Presale items are machines that we sell in their current condition ("as-is"). We have purchased these machines based solely on photos and sell them with the information provided in the advertisement. Unfortunately, we do not have additional details, such as exact dimensions or machine specifications. Additionally, these machines are often not yet in stock and have not been inspected by us. These machines are offered at competitive prices, which means the prices are lower than usual, but the risk lies entirely with the buyer. Please carefully review the information in the advertisement before making a purchase. If you have any questions, feel free to contact us! - Machine available from: 2026-01-05 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Knjdpfx Ajx Nigxsffsf Glenn Smeets

Condition: excellent (used), Year of construction: 2022, Kunzmann WF 410 M Milling Machine (2022) Manufacturer: Kunzmann Model: WF 410 M Milling Machine Year of manufacture: 2022 Condition: used, very good, as new Operating hours: 2355h Spindle hours: 253h X-travel: 410 mm Y-travel: 350 mm Z-travel: 450 mm Main drive (100%/25% duty cycle): 6.8/13.0 kW Speed range: 1-4500 rpm Tool holder: SK 40 DIN ISO 7388-1 Kjdpfxjx Ni U Ne Affjnf Feed rate: up to 5 m/min Weight: approx. 2,000 kg Fixed angle table Clamping surface: 800 x 425 mm T-slots: 6 x 14 H 7 Table load max.: 300 kg Coolant system Machine lamp Horizontal milling spindle with gearbox Scope of delivery: – Electronic handwheel HR 510 – Original documentation Without vise.

Condition: good (used), Year of construction: 1995, Machine-Details : Stock-No. 1022-2330 Type of machine Internal and Face Grinding Machine Make GLAUCHAU Type SIP 400x500 Year of manufacture 1995 retrofit Type of control conventional Storage location Monheim (Germany) Country of origin Germany Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details : internal diameter 800 mm grinding depth 500 mm swing diameter 850 mm weight of the machine ca. 6,4 t Additional information : Used internal cylindrical grinding machine with face grinding device in special design with enlarged swing diameter and extended, hydraulic transverse movement Reconstructed and modernized 1995 in the Glauchau manufacturer’s plant, put into operation 1996 1. TECHNICAL DATA 1.1 Working area Grinding diameter in the workpiece guard internal grinding, min./max. mm 30/630(800) External grinding, max. mm 800 Grinding depth, up to approx. mm 500 Table stroke mm 800 Workpiece diameter, max. mm 800 Swing diameter in workpiece protection, max. mm 800 Without workpiece protection, approx. mm 850 Distance from workpiece spindle head to grinding spindle carrier, max. mm 1225 Adjustment of the internal grinding device on the table, max. mm 545 Knedpfx Aex Nibpeffof 1.2 Workpiece headstock Cross shift, max. mm 650 Cross adjustment via gear motor and positioning device with HEIDENHAIN digital position display Swivel, max. degrees 15 Workpiece spindle Speeds rpm 16/22/32/ 45/63/90/ 125/18/250 Load capacity, max 1000 Spindle head (with bayonet flange) DIN 55021 size 11 Machine accessories: 2-axis digital displays made by HEIDENHAIN Coolant system with magnetic separator Fixators (machine shoes) Various grinding wheels Diamond dresser Large face plate Internal and face grinding device Halogen machine lamp Machine documentation

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 1,500 W, laser wavelength: 1,080 nm, table length: 600 mm, table width: 600 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, workpiece weight (max.): 500 kg, input voltage: 400 V, type of cooling: water, overall weight: 2,500 kg, total length: 3,500 mm, total width: 3,500 mm, total height: 2,300 mm, door opening width: 600 mm, door opening height: 800 mm, height adjustment type: electric, Equipment: cabin, Laser Cutting Machine with 1.5kW Fiber Laser (New Machine) Our aim is to offer highly precise, long-term stable, yet affordable laser machines. Our machines are ideal for workshops and repair shops. A perfectly developed cutting parameter library and first-class service are included as standard. - Highest precision - Machine bed made of natural stone - Linear motor drives - Axes measured and calibrated with Renishaw measuring system (with certificate) - Pneumatic sheet metal clamping - High-precision cutting machine - 1.5 kW laser source from MaxPhotonic - Finest beam diameter (20µm) - Travel range approx. 600 x 600mm - Machine control in German - Incl. nesting module - Very easy to operate - Powerful laser chiller - Table support Leasing or hire purchase possible through our financing partner Sale exclusively to commercial customers. Machine dimensions approx.: Width: 190cm Height: 190cm Depth: 145cm Knjdpfx Aoxbb Ipjffsf Weight: approx. 2500kg

Condition: good (used), Year of construction: 1990, Type RHM III 120 v-1000 Roll diameter: 120 mm Working length: 1000 mm Sheet thickness: up to 5.0 mm Knsdpfjx Niu Njx Affof 400 Volt Kramer Maschinenbau GmbH Description The features described for the RH II series also apply to the RHM III series. These round bending machines are designed for continuous operation under maximum load. The lower shaft is adjustable via a worm gear. For models RHM III 90 – RHM III 130, the geared brake motor is flange-mounted on the outside, while models RHM III 140 to RHM III 180 are equipped with an internally flange-mounted geared brake motor. All motorized machines come standard with electrical safety control. Operation for forward and reverse is carried out using a double footswitch. Additional features on type RHM III: ▪ Powerful thermally protected geared brake motor ▪ Electrical safety control ▪ Convenient double footswitch for forward/reverse ▪ Three-shaft drive (particularly recommended for thin sheet work) ▪ Drive system with two operating speeds ▪ Overload protection via slipping clutch ▪ Motorized rear shaft adjustment ▪ Motorized lower shaft adjustment Standard equipment: ▪ Gear side drive ▪ Three-shaft construction ▪ Asymmetrical shaft arrangement ▪ Upper shaft can be swung out to the front ▪ Adjustment of lower and rear shafts via handwheel ▪ Conical bending by tilting the lower and rear shafts ▪ Initial bending capacity equals round bending capacity Optional equipment: ▪ Device for conical rolling ▪ Upper shaft with grooved edge ▪ Lower and rear shafts with wire groove ▪ Surface-hardened shafts ▪ Ground shafts

Condition: good (used), Heavy-duty transport rollers, machine rollers, transport trolleys, heavy-duty trolleys, tank rollers, machine transport rollers steering gear Knedpfxswx Hcij Affjf -Machine transport rollers: armored rollers 4 pieces -Load capacity: t -Support height: 110 mm -Plates: 3x Ø 140 mm / 1x width 135 mm -Shipping/Price: complete -Dimensions of transport box: 1005/200/H165 mm -Total weight: 57 kg.

Condition: excellent (used), Year of construction: 2007, travel distance X-axis: 6,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,400 mm, feed rate X-axis: 30,000 m/min, feed rate Y-axis: 30,000 m/min, feed rate Z-axis: 30,000 m/min, spindle speed (max.): 2,000 rpm, table length: 4,000 mm, table width: 2,000 mm, CNC Bed-Type Milling Machine SACHMANN RAMBAUDI - MP-212 HS MACH-ID 9328 Make: SACHMANN RAMBAUDI Type: MP-212 HS Control: HeidenHain iTNC530 Year: 2007 KOSMO 3 indexing head Sk-50, 0,02 Degrees, 1195 Nm Spindle extention L = 600 mm with 2000 Rpm 3D Measuring probe MP60 ATC Chain 80 Positions Coolant system 1320 L with 4,8 Bar Rotary indexing table  2000 x 1600 x 15 ton V-Axis (in feed) 1500 mm Rotation 3 U/Min HeidenHein RON 700 encoder for Table rotation Ram size 500 x 500 with 56 kW Chip conveyor  X-Axis: 6000mm Y-Axis: 2000mm Z-Axis: 1400mm Table Length: 4000mm Table Width: 2000mm Table load: 25000 Power on spindle: 37kW Spindle speeds: 2000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 30000mm/min. Feed rate Y-Axis: 30000mm/min. Feed rate Z-Axis: 30000mm/min. Kedpjx Nh H Defx Affonf Millinghead auto-index:2.5 x 2.5° Length: 15000mm Width: 8000mm Height: 6000mm Weight: 85000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2012, Arburg 820S 4000-2100/400 / Production line with the robot Sepro Industrial Robot SR S5-35 S3 Trans / Operating hours: 42,014 h in automatic mode Year of manufacture: 09.2012 Injection unit: Screw diameter: 60 mm Injection weight: 723 g Injection pressure: 2500 bar Dosing volume: 792 cc Clamping unit: Clamping force: 400 t Bar spacing: 820x820 mm Size of the clamping plates: 1171x1171 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Knedpfx Afjx Nhqiefsf Additional equipment: 2K injection molding machine with rotary table and robot Very good technical condition Operating hours: 42,014 h in Automatic operation Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 pairs Control with hot runners x 24 Reinforced injection units - bimetal Proportional valve on the vertical injection unit - precise injection Machine with six cylinders / batteries with compressed nitrogen (additional charge for fast work) Parallel movements Automatic tool height adjustment Screw diameter in the vertical injection unit: ⌀40 mm - 184 g/PS The built-in system for controlling the print quality from the Sensor Kistler brand - measuring the tool pressure Original Weber rotary table: very precise, electrically driven by a servo motor controlled by an inverter Rotary table diameter: 1200 mm Purchase of the rotary table at an additional cost Robot Sepro Industrial Robot SR S5-35 S3 Trans Year of manufacture: 2012 3-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z (telescopic) Travel paths in axes approx.: X-5000, Y-1400, Z-2000 Automatic axis lubrication Touch control panel The robot safety package Robot with adapter and protective housing Purchase of the robot for an additional charge Dimensions: Weight: 21000 kg Length/width/height: 8.00x2.32x4.21 m All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2009, Machine-Details : Stock-No. 1022-2352 Type of machine Gear Hobbing Machine - Horizontal Make MONNIER & ZAHNER Type KOEPFER MZ 120 Year of manufacture 2009 Type of control CNC Storage location Monheim (Germany) Country of origin Switzerland Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details : max. wheel diameter 2-45 mm gear width 250 mm max. module 1,5 mm min. module 0,5 mm Control Fanuc 18i-MB weight of the machine ca. 2,2 t dimensions of the machine ca. 2100 x 1440 x 1700 m Additional information : The combined CNC gear hobbing and worm milling machine KOEPFER MZ 120 is characterized by its flexible usability and is used in the small module area. Just by swiveling the milling spindle from the horizontal to the vertical position and selecting the corresponding operating mode of the CNC control, the worm milling machine becomes a gear hobbing machine and vice versa. CNC control Fanuc 18i-MB (Dialog/ISO) CNC axes = X-axis plunge axis Z-axis longitudinal axis C-axis workpiece spindle B-axis tool spindle V-axis loader axis longitudinal A-axis swivel axis tool spindle head (included as an option) Y-axis shift axis (included as an option) With the following production programs: Worm milling Hobbing Worm hobbing Bevel gear and spur gear milling Bevel gear hobbing Milling cycles = straight, oblique, crowned toothing, radial, radial-axial, co- and counter-rotating milling, roughing, finishing, worm gears, straight-toothed bevel gears, face gearing (option only in the partial process) Worms [Equipment] Coolant tank 300 liters KF with LNS Turbo MS 250 Chip conveyor, built in 2021!!! Kodpex Nh Stjfx Affenf Kraft and Bauer fire extinguishing system Spiral conveyor Machine documentation [Technical data] Workpieces: Workpiece diameter 2-45 mm Max. workpiece length 250 mm Tooth length 150 mm Max. module in steel= 1 mm (gear hobbing) 1.5 mm (worm milling) 0.5 mm (bevel gear hobbing) Tools: Cutter diameter= 16-32 mm (gear hobbing) 40-63 mm (worm milling) Machine: Max. setting angle of milling head= +/- 45° (gear hobbing) +/- 30° (worm milling) Shift travel= 34 mm (manual adjustment) 34 mm (CNC axis) Collet/retraction mandrel W 20 Max. speed of workpiece spindle 770 rpm. Milling spindle drive 0.55 kW Max. milling spindle speed 8000 rpm Axis drives = X-axis (plunging) / travel 80 mm via CNC Z-axis (longitudinal feed) / travel 190 mm via CNC C-axis (workpiece axis) via CNC Rapid traverse = X-axis 6000 mm/min. Z-axis 6000 mm/min. Hydraulic unit 0.37 kW

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, laser power: 6,000 W, laser wavelength: 1,080 nm, sheet thickness steel (max.): 30 mm, sheet thickness aluminum (max.): 15 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 120 mm, input voltage: 400 V, type of cooling: water, overall weight: 2,500 kg, door opening width: 1,000 mm, door opening height: 1,000 mm, Equipment: cabin, documentation/manual, New laser cutting machine with 6kW fiber laser Our standard is to provide highly precise, long-term stable, yet cost-effective laser machines. Our machines are ideal for workshops and repair businesses. A meticulously developed cutting parameter library is included, as is first-class service. - Machine with automatic shuttle table - Very compact design - Extremely energy-efficient cutting system - Requires only approx. 9 x 3.5 meters of floor space - 6kW laser source from MaxPhotonics (G5/German version) - Top quality, schedule a viewing now! Cuts steel sheets up to 25mm Knodpohncfcjfx Affef Cuts stainless steel sheets up to 15mm Cuts aluminum sheets up to 15mm Cuts brass sheets up to 12mm - Travel range: 1500 x 3000mm - Machine control in German - Safety light curtain for maximum operator protection - Comprehensive collision protection measures for the cutting head - Large laser protection windows on three sides for process observation - Automatic, programmable 3-gas switching (compressed air, nitrogen, oxygen) - Extensive cutting parameter file - Includes nesting module - Very user-friendly operation - High-performance laser chiller - Machine control in German - German service and spare parts supply - High-performance laser chiller - Optional filter extraction Leasing or hire purchase is available through our financing partner. Sales exclusively to commercial customers. Delivery / consultation / sales only in Germany / Austria / Switzerland. Machine dimensions approx.: Length: 9.0m Height: 2.3m Width: 3.5m Total weight: approx. 6500kg Need a different laser power, table type, or table size? No problem. I will gladly provide you with a suitable offer. For example: 1 kW machine from €29,990, or 3 kW machine from €32,900 Not sure which laser power is right for your application? Of course, I can perform cutting trials according to your requirements. There are many possibilities here.

Condition: used, Year of construction: 1987, Please contact ATS Norway for more information Please provide reference number upon request: 21749 Specifications: 1987 model Not EU approved 3 axles Length: 1350 cm Length lower level: approx. 7.28 m Length of our plan: approx. 3.25m Width: 2.5m Manual widening: 50 cm Tires (see pictures) Ready for delivery   Description: 1987 Damm 3SD335 3 axle machine trailer. The trailer is not EU approved. Ready for delivery Technical approved: Yes EU-approved until: 17.10.2026 Own weight: 130 Ksdpfxexvk Uhe Affenf Width: 2,5 Length: 1350 Model: 3SD335 3 akslet maskintralle

Condition: excellent (used), Year of construction: 2011, Arburg 1500T 3200-1300 e² / hybrid machine with one rotary table Year of manufacture: 2011 Injection unit: Screw diameter: 60 mm injection weight: 607 g Injection pressure: 2000 bar Metering volume: 664 ccm Clamping unit: clamping force: 320 t tie bar distance: 0x0 mm size of clamping platens: 1510 mm ejector: hydraulic clamping unit: hydraulic Control system: SELOGICA - touch screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 30.000 in automatic mode Euromap 67 Knjdpex Nhp Ssfx Affef Robot interface Control with air valve Hydraulic core pull x 3 Control with hot runners x 13 Injection unit hardened - bimetal Main machine motor - servo motor driven by inverter Very precise rotary table driven by servo motor controlled by inverter Rotary table diameter: 1500 mm Horizontal injection unit with automatic injection height adjustment Self-closing nozzle Primus sensor - mold pressure control It is possible to convert the injection unit so that it works vertically Dimensions: Weight: 16080 kg Length/width/height: 4.91x2.12x4.62 m All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2008, Arburg 630S 2500-1300 ECO / Production Line with Sepro Industrial Robot SDR 22S Year of manufacture: 2008 Injection Unit: Screw diameter: 55 mm Shot weight: 521 g Injection pressure: 2380 bar Dosage volume: 570 ccm Clamping Unit: Clamping force: 250 t Tie bar distance: 630x630 mm Platen size: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: Kedox Nhp Eopfx Affonf Euromap 67 Robot interface Air valves x 4 Hydraulic core pulls x 2 Controller with 15 hot runner zones Injection assembly hardened - bimetallic Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) ECO – machine equipped with a system to adjust the minimal mould height Robot - Sepro Industrial Robot SDR 22S Year of manufacture: 2016 4-axis robot: 3 axes driven by servomotors (electric); C-axis - pneumatic Axis strokes: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Robot with adapter, conveyor belt and protective housing Acquisition of the robot and the conveyor belt available at extra cost Dimensions: Weight: 12,510 kg Length/Width/Height: 6.57x1.76x2.46 m All offered machines are commissioned by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2016, Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of construction: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 220 t Distance between tie bars: 570x570 mm Size of the clamping platens: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 3-component injection molding machine, high speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 Control unit with hot runners Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Machine with two cylinders / battery with compressed nitrogen (additional charge for fast work) The machine is designed for operation with an electric turntable. The machine has an inverter to control the servomotor in the rotary table and an interface for connecting the rotary table Parallel movements Screw diameter in the vertical injection unit: ⌀25 mm - 45 g/hp Screw diameter in the lateral injection unit: ⌀25 mm - 45 g/hp Wittmann W823 robot Year of construction: 2015 5-axis robot: 3 axes are driven by servomotors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt for an additional charge Dimensions Weight: 10830 kg Length/width/height: 5.53x1.77x3.29 m Ksdpfx Aex Nhprjffonf All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2011, Arburg 570H 2000-800 e² / Hybrid Machine / Production Line with Arburg Multilift Select Robot Year of Manufacture: 2011 Injection Unit: Screw diameter: 50 mm Shot weight: 359 g Injection pressure: 2000 bar Dosing volume: 392 cc Clamping Unit: Clamping force: 200 t Tie bar spacing: 570x570 mm Platen size: 795x795 mm Ejector: electric Clamping unit: toggle lever Control System: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: high-speed, energy-saving, and very quiet Euromap 67 Robot interface Air valves x 4 Hydraulic core pull x 2 Controller with 12 hot runner zones Injection unit hardened - bimetallic Main motor of the machine: servo motor driven by inverter – energy saving Injection unit driven by a servo motor, controlled by an inverter Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) Central lubrication system Parallel motions Arburg Multilift Select robot, 6 kg transverse Year of manufacture: 03.2011 4-axis robot: 3 axes driven electrically by servo motors; C-axis pneumatic Travel distance in axes: X-400, Y-800, Z-1400 Robot with adapter, conveyor belt, and safety enclosure The purchase of the robot and conveyor belt is available for an additional charge Dimensions: Weight: 8700 kg Length/Width/Height: 5.58x1.71x2.21 m All machines offered are started up and tested by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Ksdpfxjx Nhplo Affenf Price: On request

Condition: excellent (used), Year of construction: 2003, Arburg 570C 2000-350/150 / Production Line with Side-mounted Arburg Multilift Robot / 2K Machine Year of Manufacture: 2003 Injection Unit: Screw diameter: 40 mm Shot weight: 153 g Injection pressure: 2,120 bar Dosage volume: 182 ccm Clamping Unit: Clamping force: 200 t Tie bar spacing: 570x570 mm Platen size: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Production line with side-mounted Arburg Multilift robot 2K (two-component) machine Air valve x 1 Knodpjx Nhn Usfx Affef Hydraulic core pull x 5 Control system with hot runner integration Reinforced injection units – bimetallic Proportional valves on injection units – precision injection Vertical injection unit – screw diameter: ⌀25 mm – 49 g/PS All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2012, Arburg 520S 1600-400/170 e² / Production Line with Geiger Robot Year of manufacture: 10.2012 Injection Unit: Screw diameter: 35 mm Shot weight: 141 g Injection pressure: 2500 bar Dosage volume: 154 cc Clamping Unit: Clamping force: 160 t Tie bar spacing: 520x520 mm Platen size: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA – Touchscreen Additional equipment: 2K injection molding machine with rotary table and Geiger robot Very good technical condition Hybrid machine: energy-efficient and very quiet Euromap 67 Robot interface Air valve x 4 Hydraulic core pull x 5 Hot runner control x 12 Reinforced injection units – bimetallic Machine with two cylinders / compressed nitrogen accumulators (additional charge for fast operation) Parallel movements Kjdpfjx Nhnuex Affenf Screw diameter in vertical injection unit: ⌀30 mm - 77 g/PS Integrated Arburg conveyor belt and sorting flap Original Weber rotary table, highly precise – electrically driven Purchase of the rotary table and robot for a surcharge Dimensions: Weight: 8140 kg Length/Width/Height: 4.81x1.84x3.45 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request