Used Tomcat Cleaning for sale (6,344)

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system, type TR450 The spray-rotation cleaning system, type TR450, is an automatic cleaning and degreasing system with a lid that can be easily opened upwards. The system is designed for cleaning individual parts and/or bulk goods in baskets with dimensions of L x W x H 520 x 320 x 200 mm. For the cleaning process, the basket must be closed with a lid. The cleaning result depends on the fact that the parts in the basket can be slightly tumbled when cleaning bulk goods. The fill level in the basket must be taken into account for this purpose. The system is also equipped with a flood basin under the parts basket, which enables the parts to be immersed and scooped out, resulting in an even better cleaning result. including the following equipment: • Completely made of stainless steel 1.4301 inside and outside • Level monitoring and automatic fresh water refill • Insulation of the entire system • Hot air drying (power: 11.6 kW) • Steam extraction • Oil skimmer for bath maintenance • Automatic fresh water refill Pgjdpfxjfbt Sie Afuor • 1 small parts basket 520 x 320 x 200 mm, mesh size: 6 x 6 mm, incl. height-adjustable locking lid Connection power: approx. 20 kW (32 amp plug)

Year of construction: 2022, condition: like new (used), functionality: fully functional, A very rare opportunity to acquire a 3 year old 600 kgs per hour, complete hot wash recycling and cleaning line suitable for a range of rigid polymers to be size reduced and intensively cleaned. Machinery has very low hours of operation, and is only available as a result of re-organisation of the current operations. Materials are firstly delivered either by manual loading , or by an automatic pnematic box or cage lift/tilt system to a picking belt and metal detection tunnel. Materials then proceed via an inclined conveyor belt to a Hot washing granulator. Size reduced materials then drop onto a vibrating sieve ,to separate the majority of dirty water and any fines. Granulated materials transfer to an inclined Archimedes screw delivering materials to a horizontal high speed centrifugal cleaner. After this cleaning the materials enter a large diameter vertical drying centrifuge and all used water is then recirculated to heated tank to be reused. Finished materials then conveyed to a ZigZag air separator for final fines/dust removal before being blown to a cyclone over a double bagging tower. The fines separated at this stage are blown to a separate cyclone over a single bagging tower for fines and fibres etc removed by the ZigZag tower. The entire line can be seen in operation in the UK and by special arrangement could be trialed with potential buyers materials. Used water caould be recycled through the system, but this is dependent upon the type of contamination to be removed. The entire line is of European manufacture, and all materials exposed to water are manufactured in Stainless Steel. Pgsdpfx Ajxcnxdsfuer Decommissioning, Transport, Installation and commissioning together with operator training can also be offered internationally to a buyer of the equipment.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, Elumatec VS 750 four-head welding machine with EV850 4-axis CNC cleaning line. The welding machine and cleaner are currently programmed only for SCHÜCO profiles. Profile height range for welding: 30-185 mm Pgodpfxex E Rd Dj Afuer Minimum window dimensions for welding: 350 x 350 mm Maximum window dimensions for welding: 2600 x 4000 mm Weld bead limitation: 0.2 mm and 2 mm The welding machine features a touch operator panel based on Windows XP The cleaner is also equipped with an operator panel Online connection is available between the welding machine and the cleaner After welding, automatic transport to the cleaner is provided The cleaner operates in both manual and automatic mode In automatic mode, the rotation station turns the window to each specific corner to be processed by the cleaner. We provide assistance with machine disassembly and loading for transport.

Condition: good (used), Cleaning tank, ultrasonic cleaning basin, ultrasonic cleaner, ultrasonic bath -Manufacturer: Zender, stainless steel ultrasonic cleaning tank with heater, mobile -Basin internal dimensions: 2200/315/H280 mm -Temperature control range: 30 to 110°C -Operating temperature: max. 70°C Pgedpozn H Aljfx Afuor -Ultrasonic generator: Zhangjiagang Zhongnuo type JYD -Individual components: see photos -Dimensions: 2530/315/H700 mm -Weight: 150 kg

Condition: like new (used), Year of construction: 2026, functionality: fully functional, Cleanrooms & FFU controllers – available immediately, at attractive prices! Are you looking for a professional cleanroom solution? Then you’ve come to the right place! We offer high-quality cleanroom systems and control technology directly from our own stock – without long delivery times, at fair prices. Filter Fan Unit (FFU) controllers – grab them now! ✔ 10 units available immediately ✔ Including digital control unit ✔ New – €1,000 per unit Your cleanroom – tailored to your dimensions, according to your requirements Pgedpforlm Rvjx Afuor We plan, deliver, and build your cleanroom – completely according to your wishes. Our modular wall elements enable flexible room concepts with glazing and integrated ventilation technology. The quality of our work can be seen in the photos – a successfully completed project for a customer in the Netherlands. Unbeatable value for money: Starting from just €500-€750 per m² of floor space – including glazing, for a room height of 2,500 mm. Example: A cleanroom measuring 4 m × 4 m costs you from €8,000 net – ready for use and built according to your specifications. Contact us today! We will quickly and easily create a customized offer for you – for any size. Your team at Impuls Engineering GmbH

Condition: used, Year of construction: 2011, operating hours: 6,763 h, functionality: fully functional, Sweeper-scrubber machine Technical condition: good Pgedpfx Aoukrcpofusr Transmission: Hydrostatic; Front tires: 2 x superelastic; Rear: 1 x bandage wheel; Power steering; Front windshield; 2 x front/ StVZO-like AS; Overall height ready to operate: 2300 mm

Condition: good (used), Year of construction: 1999, Aqueous cleaning system in good condition with vacuum dryer (pump not included). Available immediately. Podpfx Ajd Nnvhsfusgr

Condition: used, Year of construction: 1991, HAMBA BK 8006-P Ultra-Clean Cup Filling and Sealing Machine The HAMBA BK 8006-P is a high-performance, fully automatic, linear multi-lane cup filling and sealing machine engineered for the precise packaging of dairy, dessert, and liquid food products. Built to rigorous German engineering standards, this system combines exceptional throughput with advanced "Ultra-Clean" hygienic technology, ensuring extended product shelf life and uncompromising safety. Key Performance Capabilities - High-Speed Output: Delivers high-volume production capacities reaching up to approximately 12,000 cups per hour (depending on container dimensions and product viscosity). - Multi-Lane Linear Efficiency: Utilizes a space-saving, index-motion linear conveyor system for continuous, stable container handling. - Precise Multi-Component Dosing: Configured to accurately portion multi-layer products, making it ideal for puddings with toppings, yogurts, and layered desserts. Advanced Hygiene & Ultra-Clean Standards Pgjdjzqtkzspfx Afujr - Contamination Control: Equipped with integrated sterile air and containment enclosures to safeguard open product zones. - Container Sterilization: Employs specialized sterilization modules (such as steam, UV, or chemical sanitization) to treat cups and lidding foil prior to filling. - CIP/SIP Ready: Designed for seamless integration into Clean-in-Place and Sterilize-in-Place plant loops to minimize changeover downtime. * Station 1: Cup station Station 2: For level control and for double or missing cup Station 3: H2O2 disinfection station for cups * Station 4: Filling station Station 5: Aluminum lid H2O2 disinfection station * Station 6: Thermal sealing station * Station 7: Expiration date print station * Station 8: Integrated gripper

Condition: ready for operation (used), inner diameter: 1,500 mm, inner dimension height: 900 mm, pressure: 4 bar, temperature: 90 °C, load capacity: 800 kg, operating pressure: 4 bar, For sale: a spray washing machine from the Finnish brand Aqua Clean. The entire unit is made of acid-resistant steel and additionally insulated. The washing area has a diameter of 150 cm and a height of 90 cm. The machine allows for setting the working time and temperature up to 90°C. Spraying is performed from below, from the side, and from above under a pressure of 4 atmospheres. The pump has had its seals replaced with Viton seals, which are resistant to harsh chemicals. It also features an exhaust fan for removing fumes. The load capacity is 800 kg. A video demonstrating the machine in operation is attached to the advertisement. Transportation is possible throughout the EU. Pedpfezgx H Tex Afuegr

Year of construction: 2019, condition: like new (used), ASYS ACS 02 Pgodpfjzqcwwsx Afuer * Year of manufacture: 2019 * Serial number: 084939 * Machine length: 1,060 mm * Supply voltage: 400 VAC / 50 Hz * Power connection: 3-phase * Rated current: 2.7 A * Connected power: 1.5 kW * Fusing: 16 A * Operating pressure: 6 bar * Condition: Used, operational

Condition: used, Year of construction: 2005, functionality: fully functional, fuel type: electric, empty load weight: 172 kg, total length: 1,530 mm, construction height: 1,050 mm, drive type: Elektro, construction width: 1,100 mm, Sweeper Condition: Ready for use and fully functional Technical condition: normal Front tire size: 3.00-4 Pedpfx Aszmbi Refuogr Description: In addition to this Hako model, we have approximately 200 heavy-duty forklifts, compact forklifts, and side loaders in our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease purchase and financing at favorable terms are possible for us at any time. We also gladly buy your used vehicles outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this B755. P.S.: Our forklift repair shop specializes in repair, maintenance, overhaul, and custom fabrication for forklifts from 8 tons upwards. We will also gladly display your vehicle in our showroom for consignment sales. Working width: 750 mm; Effective sweeping width: 1100 mm

Condition: used, Year of construction: 2007, machine/vehicle number: 506 8026 / 479 6312 / 7028, functionality: fully functional, input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 2,500 mm, workpiece height (max.): 160 mm, number of axes: 4, actuation type: electric, overall weight: 3,000 kg, Equipment: documentation/manual, For sale: a complete, functional, and production-used welding and cleaning line from Rotox, manufactured in 10/2007. The line was used at EUROCOLOR for the production of PVC windows and doors (Schüco and Rehau profiles). Working direction: right to left (the right beam, from the welding machine's side, is a fixed beam). Pgjdozp Nz Tjpfx Afujr The line includes: ● Rotox SMK 506 4K four-head welding machine ● Rotox EPA 479 automatic corner cleaning machine (four-axis, CNC) with WT 427 rotating station ● FIMTEC cooling station Photos and documents are available at this link: 1. Rotox SMK 506 4K four-head welding machine ● Year of manufacture: 10/2007, machine number: 506 8026 ● Fixed side of the machine: right (working direction from right to left) ● Profile arrangement on the table: outer side of the window facing down ● Weld bead allowance: 6 mm ● Flash control: 0.2–2.0 mm, automatically adjustable knives from above and below (used at approximately 0.2 mm) ● Maximum welding dimension: 2500 x 2500 mm (in practice, frames were welded up to approximately 2650 x 2650 mm) ● Minimum welding dimension: 320 x 420 mm, with automatic transport ● Frame welding: min. 350 x 500 mm – max. 2500 x 2400 mm ● Welding of U and T profiles and door frames (C-type welding) ● Heated knives for controlling the weld bead ● Quick replacement of Teflon film ● Machine safety fencing ● Data acquisition system from the welding machine ● Operating counter: approximately 385,000 welding cycles ● Manufacturer's specifications: maximum connection power 10 kW, voltage 400 V, current 20 A, 50 Hz, air pressure 6–7 bar, air consumption approximately 150 NL/weld, profile height 45–160 mm, maximum profile width 140 mm, weight approximately 3000 kg. Material processed: PVC profiles 2. Rotox EPA 479 automatic corner cleaning machine + WT 427 rotating station ● Year of manufacture: 10/2007, cleaning machine number: 479 6312 ● WT 427 rotating station connected to EPA 479: machine number 7028, dimensions 5700 x 2500 mm, transport direction to the right ● Fixed side of the machine: right ● Profile arrangement on the table: outer side of the window facing down ● Maximum dimensions of processed frames: 2500 x 2500 mm ● Unit for drilling holes for Siegenia and roto hinge hardware – unit with a six-spindle head, pneumatic drive ● Hole drilling for hinge: 4 x Ø3 mm, 2 x Ø6 mm (according to technical drawing) ● Equipment: 2x unit for cutting the visible surface, 2x second unit for cutting the visible surface, 2x CNC unit for cleaning under the seal (pneumatic drive), unit for cutting the inner surface vertically (sash bar), unit for cutting the angled surface up to 23° with an additional bevel/arc (chisel cleaning), unit for cutting the inner surface horizontally, tools for internal processing, 170 mm contouring blade (right), grooving knives S=3.0 mm/G=0.5 mm (2 pcs.), knives for flat trimming without a groove (2 pcs.), extension cable for the control panel ● Operating counter: approximately 9,863,552 cleaned corners ● Note: Precise minimum dimensions of profiles and welds that can be cleaned in manual/automatic mode – to be confirmed directly with Rotox Polska 3. FIMTEC cooling station ● Year of manufacture: approximately 2021–2022 ● Purchased from GRAF Machines are functional, disassembled – not currently in operation – prepared for transport. Contact: EUROCOLOR Sp. z o.o. ul. Toszecka 47, 44-120 Pyskowice Machines are functional and ready for inspection and demonstration before purchase. Disassembly

Year of construction: 2023, condition: excellent (used), functionality: fully functional, number of tool turrets: 1, Note: This offer concerns the assignment of the leasing agreement. Narran ROD 500W pulsed laser cleaning system, IPG Photonics source. The unit is in very good condition. Technical specifications: - Average power - 500 W, - Peak power - 2.5 MW, - Wavelength - 1064-1070 nm, - Frequency - 2-50 kHz, - Fiber optic cable length - 10 m, - Head weight - 1.5 kg, - Dimensions - 1.4 x 0.6 x 1.1 m, - Unit weight - 195 kg, - Rated power - 3.5 kW, - Power supply - 220/230 V (16A). In addition, the following will be included with the unit: - TBH LN 265 filter – high-efficiency dust extraction system in a compact and mobile design; - Exhaust fan with extraction hose and nozzles; - Special safety glasses for laser operation – 6 pcs; - Interchangeable lenses for the working head; - 3M mask/face shield; Psdpfxox Ezw Uo Afuogr - Protective screens to demarcate the work area; - PL and EN manuals, PL operating instructions, and workstation instructions; - Domain name, website, and email address. The leasing is managed by mLeasing Sp. z o.o. (mBank group). When submitting an inquiry, please provide the following: - EU VAT number, - Full company name, - Company address, - Name of the person representing the company, their email address, and direct phone number. Based on this information, we will submit a request for the assignment, and mLeasing will contact the interested party directly. The stated price is the sum of the net principal payments, excluding any additional costs, and is for informational purposes only. The offer does not include an assignment fee.

Condition: used, functionality: unexamined, Year of construction: 2012, Available for shipment. Machine is operational condition. Podpeyup R Tsfx Afusgr Ask for additional information including photos and pricing!

Condition: new, Year of construction: 2025, Al-Ko Clean Air Dust Collector Exhibition piece (no operating hours yet – new) Technical data, Power Unit 250 P Intake nozzle: 250 mm Motor rated power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum air flow: 4900 m³ / h Rated air flow: 3524 m³ / h Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Pgjdpfx Afobuvbrouor Weight: 758 kg Location: available from warehouse 54634 Bitburg

Condition: new, Year of construction: 2025, Technical specifications: ALKO clean air extraction system, mobile type, Model Mobil-Power Unit APU 120, motor power 1.5 kW, suction nozzle diameter = 120 mm, sound-dampened, mobile collection container, 135 liters, manual filter cleaning, dimensions: L = 1,085 mm, W = 650 mm, H = 1,985 mm, volume of dust container: 135 liters, weight: 117 kg, nominal volumetric flow rate (after cleaning): 814 m³/h. Pgjdocdy Ndspfx Afujr Exhibition model. Available at a special price. Location: In stock at Bitburg warehouse.

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Pgjdecnw U Dopfx Afusr Clean air extraction systems for wood chips and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Can also be used for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip containers with clamping bracket and chip collection bag. The system is fully assembled upon delivery, allowing for quick deployment. Mobile. Filter description: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standard and tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control panel. The fan is located downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of supply: Metal fan impeller. Inspection opening for cleaning the bypass filter. Connection cable 5 m with CEE plug 5-pole and phase inverter. 2 swivel castors and 2 fixed castors with parking brake. Preparation for connection of machine detection for up to 8 machines and slide valve controls. Manual cleaning. Sound pressure attenuator available as an accessory. Model: RLA 125 M Article no.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal volume flow: 1095 m³/h Max. volume flow: Vacuum at Vnenn: Filter area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from the lower edge of the extraction port to the ground: 850 mm Weight: 194 kg Location: Arriving at warehouse 54634 Bitburg.

Condition: new, Year of construction: 2025, Description: IE 3 motor as standard Maximum volume flow up to 8,500 m³/h at the fan Approximately 73 m² filter area, residual dust content after H3 Pre-separator as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Already meets the requirements of prEN 16770 Optional: Models with type-tested rotary valve airlock (FSA) Tested backflow damper Integrated automatic extinguishing system Suction nozzle: 350 mm Motor rated power: 11 kW Voltage: 400 V / 50 Hz Pgsdocqy I Sspfx Afujr Maximum volume flow: 8500 m³/h Rated volume flow: 6927 m³/h Negative pressure at Vnenn.: 2765 Pa Filter area: 73 m² Chip collection volume: (net/gross) 3 x 165 L / 3 x 241 L Sound pressure level: 71 dB (A) Dimensions (L x W x H): 3112 x 1058 x 2351 mm Weight: 1074 kg Location: in stock at 54634 Bitburg

Condition: new, Year of construction: 2025, Exhibition model – sold at a special price Sold at a special price Technical data 300-P Intake nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Pgodpjcdy I Tsfx Afusr Voltage: 400 V / 50 Hz Max. volumetric flow: 6,000 m³/h Rated volumetric flow: 5,089 m³/h Negative pressure: 2,280 Pa Filter area: 30 m² Chip collection volume: 3 x 250 L Dimensions (L / W / H) in mm: 2963 x 994 x 2346 Weight: 880 kg Special feature: The unit is equipped with a noise silencer – therefore extremely quiet – can be sold with or without it. Location: Available from stock at 54634 Bitburg.

Condition: as good as new (ex-display), Year of construction: 2025, IE 3 motor included as standard max. volume flow up to 10,000 m³/h at the fan approx. 73 m² filter area pre-separator included as standard 71 dB (A) at full load (according to DIN EN ISO 11201) Certified according to GS-HO-07 H3 residual dust content of 0.1 mg/m³ reliably maintained (wood dust) Models with type-tested rotary valve airlock (FSA) Tested backflow flap Integrated automatic extinguishing system 350+ P Intake nozzle 355 mm Motor rated power 15.0 kW/3Ph Voltage 400 V/50 Hz max. volume flow 10,000 m³/h Rated volume flow* 7,127 m³/h Negative pressure at Vnenn. 3,347 Pa Filter area 73 m² Chip collection volume (net / gross) 3 x 165 L / 3 x 241 L Sound pressure level 72 dB (A) Dimensions (L/W/H) in mm 3,112 x 1,058 x 2,361 Psdpfx Ajdqzhhefujgr Weight 1,074 kg

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 120 M with automatic machine detection Clean air extraction system with H3 certification Intake nozzle: 120 mm Motor rated power: 1.5 kW / 3-phase Pgsdpfx Afjhkztwsuer Voltage: 400 V / 50 Hz Maximum air flow rate: 1,140 m³ / h Nominal air flow rate: 814 m³ / h Negative pressure: 2,180 Pa Filter area: 5.1 m² Chip collection volume: approx. 135 liters Dimensions (L x W x H) in mm: 1,178 x 650 x 1,972 Weight: approx. 121 kg Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, A truly reliable and mobile family: AL-KO POWER UNIT® dust extraction systems are available for maximum volume flows between 790 and 10,000 m³. This makes the energy-efficient AL-KO POWER UNIT® models the perfect solution for small to medium dust extraction volumes or an ideal addition to existing stationary systems. Your advantages: • IE 3 motor as standard • approx. 73 m² filter area • Pre-separator as standard • Certified according to GS-HO-07 • H3 residual dust content of 0.1 mg/m³ is reliably maintained (wood dust) • optionally with type-tested rotary valve airlock (FSA) • Tested backflow flap Pgjdpfx Ajhkzt Nsfujr • Integrated automatic extinguishing system Technical data: • Motor rated power: 11.0 kW / 3-phase • Voltage: 400 V / 50 Hz • max. volume flow: up to 8,500 m³/h at the fan • Rated volume flow: 6,927 m³/h • Negative pressure at Vnenn.: 2,543 Pa • Suction nozzle: 350 mm • Noise level: 71 dB (A) at full load (according to DIN EN ISO 11201) • Chip collection volume (net/gross): 3 x 165 L / 3 x 250 • Dimensions (L x W x H) in mm: 3,130 x 1,058 x 2,361 • Net weight without packaging: 977 kg • Dust class H3 Location: Available from stock at 54634 Bitburg • immediately available – in stock Subject to prior sale

Condition: new, Year of construction: 2025, Compact design Highest reliability High suction power Integrated pre-separator 100% air recirculation, residual dust content < 0.1 mg/m³ Low noise emission Extended filter service life Easy emptying Supplied ready for connection with rotary valve Models with rotary valve: AL-KO POWER UNIT® 300 ZRS Suction nozzle: 300 mm Motor rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volume flow: 4,900 m³/h / 6,000 m³/h Nominal volume flow: 5,089 m³/h Negative pressure: 2,280 Pa Filter area: 30 m² Filter cleaning: pneumatic Dimensions (L x W x H) in mm: 2,950 x 994 x 3,013 Rotary valve capacity: 15,816 L/h Weight: 920 kg Pgodshkzu Aepfx Afusr Location: In stock at warehouse 54634 Bitburg - immediately available - Subject to prior sale

Condition: new, Year of construction: 2025, AL-KO POWER UNIT® 300 P-BP 30 -50 Intake nozzle: 300 mm Engine rated power: 7.5 kW / 3-phase Voltage: 400 V / 50 Hz Maximum volumetric flow rate: 6000 m³/h Nominal volumetric flow rate: 5,089 m³/h Negative pressure: 2,587 Pa Filter area: 30 m² Dimensions (L x W x H) in mm: 3,000 x 1,361 x 2,817 Briquetting capacity: 30 - 50 kg/h Briquet diameter: 50 mm Weight: 1570 kg Machine is brand new and in stock at our warehouse. - AVAILABLE IMMEDIATELY - Subject to prior sale Location: 54634 Bitburg Pedpsh D If Hsfx Afusgr

Condition: new, Year of construction: 2025, Al-Ko Clean Air Dust Collector, Year of Manufacture: 2024 Exhibition model - Immediately available Podpfecdy I Rjx Afuogr Exceptional special price Technical data, Power Unit 250 P Intake nozzle: 250 mm Motor rated power: 6.5 kW / 3-phase Voltage: 400 V / 50 Hz Max. volumetric flow rate: 4900 m³/h Rated volumetric flow rate: 3524 m³/h Negative pressure: 2451 Pa Filter area: 22.4 m² Chip collection volume: 2 x 250 L Dimensions (L / W / H) in mm: 2305 x 994 x 2351 Weight: 758 kg Location: Available from warehouse 54634 Bitburg