Used To Disinfect for sale (95)

Condition: used, Year of construction: 2001, Used equipment for the treatment and the preparation of water It is a reverse osmosis that produces a filling water called TABLE WATER. Manufacturer: UAT – UNIVERSAL AQUA TECHNOLOGIES, INC. – USA Model: TP-110K Year of production: 2001 Capacity: 12,000 L / h Operating hours: 9,810 Volts: 380 – Hz 50 – Ph 3 Description of equipment: -MM FILTER -INPUT WATER TREATMENT -REVERSED OSMOSIS UAT – UNIVERSAL AQUA TECHNOLOGIES, INC. USA, 2001 -DEMINERALIZED WATER TANK 12 m3 -PUMPING BLOCK FOR MINERALIZATION -MINERALIZER -MINERALIZED WATER TANK -PUMPING BLOCK FOR WATER DISINFECTION AND DELIVERY TO FILLERS Ledpfjvgul Aox Affsta Technological description of table water production:   a) General  The plant for the production of table water has a capacity of 12,000 l/h.   It consists of:  Sand filter Device for reverse osmosis (TP-110K) Product water tank Pump for mineralization of product water Mineralizer Mineralized water tank System for ozonation (disinfection) of mineralized water Machine for washing and filling (polycarbonate) PC bottles.  The plant is located in one room. Automatic serving is foreseen, with all necessary blocking and regulation, due to the safety and simplicity of the process itself.   b) Raw water supply Tap water is supplied to the room where the water preparation plant is located. From the supply pipe through the inlet water valve, the water passes through the multi-layer sand filter and enters the RO device through the solenoid valve.   c) Reverse osmosis After passing through the sand filter, the incoming water passes through the 5 jim filter and through the throttle valve enters the housings in which the membranes are located and where the physical process of separation (separation) of water from mineral substances in suspended and non-suspended forms.  Reverse osmosis, as a membrane separation process, removes bacteria, viruses, organic matter and salts from water. The effect of salt removal is 95-99%, which depends on the separation factor of the membrane itself, thus after the reverse osmosis process, sterile, bacteriologically correct water is obtained, which contains a small amount of salt, and the resulting the water of high quality.  The membrane is a key part of the reverse osmosis device and the efficiency of the RO process largely depends on its characteristics. In the device for reverse osmosis, reverse osmotic membranes based on a spiral coil were used, which proved to be the best in the industrial application of this highly efficient process. The water is forced over the membrane, the part that passes through the membrane is called permeate, and the part that contains everything that the membrane retained is called concentrate (retentate), which is discharged into the sewer as waste water.

Condition: used, This listing is for the Smeg GW1160 Glassware Washer The unit is in full working condition and is ready for immediate use Smeg GW1160 Glassware Washer – Overview The Smeg GW1160 is a compact, high-performance laboratory glassware washer engineered for precision cleaning, thermal disinfection, and drying of laboratory glassware. It’s particularly suitable for critical cleaning applications in biotechnology, pharmaceutical, and research labs. Key Features Washing Temperature: Up to 95°C for thermal disinfection. Microprocessor Control: Programmable electronic control system with 9 default programs and 6 customizable (free) programs. RS232 Serial Port: Enables data logging or printer/PC connection for traceability. Active Thermodynamic Drying: Ensures fast and thorough drying of internal surfaces. High-Efficiency Ecoslim Steam Condenser: With cold water injection for effective drying and steam management. Chemical Dispensing: Alkaline powder detergent dispenser. Peristaltic pump for acid liquid neutralizer. Two additional peristaltic pumps can be installed. Washing Chamber: Made of AISI 316L stainless steel for corrosion resistance and hygiene. External Panels: Constructed from AISI 304 stainless steel. Lodpfxjxhgd Nj Affsta Two Independent Washing Levels: Accessible via telescopic guides, suitable for various glassware sizes. Built-in Water Softener: With salt sensor to optimize cleaning and prevent scaling. Dual Water Connections: Compatible with cold water and demineralized water. Technical Specifications External Dimensions (W x D x H): 600 x 605 x 850 mm Internal Chamber Dimensions (W x D x H): 525 x 490 x 570 mm Weight: ~74 kg Electrical Options: 400V (3-phase, 7.0 kW) 230V (single-phase, 2.8 kW)

Condition: new, capacity 90 degrees: round 500 mm capacity 90 degrees: square 420 mm 600x400 saw band length 5320x34x1,1 mm band speed 15 - 100 m/min table height 805 mm total power requirement 3,0 kW weight of the machine ca. 1,45 t dimensions of the machine ca. 1,72 x 2,5 x 2,5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • miter left + right 60° • Frequency-controlled saw drive • 34 mm saw band height Ltsdpfsupxupjx Affoa • Wear-free material support turntable, ball-bearing • To position the saw blade guides using a very wide linear guide • Strong, robust gearbox • Large chipboards • 2 integrated support rollers left and right • Removable chip tray (disinfection) • Free-standing control panel, safe and ergonomic • Storage space for tapes, consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Preload super fast (front loading) • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Minimum cutting range from around 10 mm Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, cutting diameter 305 mm capacity 90 degrees: flat 350 x 200 mm capacity 90 degrees: square 260 mm capacity 45 degrees: flat 230 x 200 mm capacity 45 degrees: round 250 mm capacity 45 degrees: square 230 mm capacity 60 degrees: flat 170 x 100 mm capacity 60 degrees: square 155 mm capacity 60 degrees: round 175 mm turning speed range: 18 – 110 m/min dimensions of saw-band 3.375 x 27 x 0,90 mm work height max. 880 mm total power requirement 1,5 / 1,8 kW weight of the machine ca. 840 kg dimensions of the machine ca. 1.900 x 1.850 x 2000 mm Furnishing : - miter left 45 ° automatic operation - miter left 60 ° semi-automatic operation (cuts without programming) - Material height sensor (automatic cut start detection) - Frame and gear from a single source - very quiet cut and very low vibration - Chip tray can be removed (disinfection) - Shockproof and ergonomic control panel with oil-proof EPDM cover - Easy access to the saw, material and feed unit - Foldable safety cover - Fine adjustment of the feed rate - semi-automatic cut BERG SCHMID CNC control: - Possibility to enter various parameters such as number of pieces and material length, automatic calculation of the cutting channel - for 10 different sawing programs, with 99 sub-programs - for different lengths and quantities Lodpfx Afjxabacjfeta e.g. 1x cutting program with various cut lengths - Incremental feed with automatic length compensation - Adjustable for cut lengths from 2 mm to 9,999 mm, remaining piece length 170 mm - Single stroke - feed slide 500 mm Info from the manufacturer: When installing this saw in the network with Residual current circuit breaker (FI) should this universal current sensitive and not below 300 mA be executed.

Condition: used, Year of construction: 2004, Plant for rinsing and chemical regeneration of a beer post-filtration. Additional title: cleaning system for secondary beer filtration Volume caustic vessel: 600 l Volume disinfektion vessel: 1000 l Ltsdpfx Ajw Tmrfjffoa Volume water vessel: 1000 l Length: 0,90 m Height: 1,95 m Weight: 200 kg Operation / Control: Simatic OP7 Material: caustic vessel: 1.4401; disinfection/water: 1.4301 Base construction: part for caustic: on frame with 4 dome feet; disinfection/water: on frame with 6 dome feet Features: part for caustic: caustic vessel, thermometer, heating coil, dosing vessel, conductivity measuring device, centrifugal pump disinfection/water: disinfection vessel, water vessel, Hilge Hygia II centrifugal pump: 4 kW, 20 m³/h Periphery: control cabinet with Simatic OP7 touchpad

Condition: used, mileage: 112,500 km, power: 162 kW (220.26 HP), first registration: 06/2022, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,950 mm, total width: 2,550 mm, total height: 3,050 mm, Equipment: air conditioning, central locking, For sale here is a well-maintained MAN TGL 8.210 skip loader with the globally popular 4.6-liter diesel engine. * The vehicle is in good condition! * German vehicle * Regularly serviced * Euro 6d * VAT deductible Equipment: * Meiller skip loader * Automatic transmission * Air conditioning * Jaw-type trailer coupling * Truck registration * On-board computer * Electric exterior mirrors * Central locking * 3 seats * And much more… Ltodpsxd Nqdsfx Affea Technical data: * Permissible gross weight: 7,490 kg * Unladen weight: 4,800 kg * Payload: 2,690 kg * Towing capacity: 11,280 / 3,500 kg Why are we the right choice? Attractive financing through our partner bank. * Nationwide delivery of your preferred vehicle * Trade-in of your old vehicle at fair conditions * Temporary license plates (5-day/ customs registration) usually available the same day * Pick-up service from the airport or train station All vehicles are professionally prepared and hygienically clean! Special features: Disinfection of the interior and ventilation system using ozone cleaning, two-stage exterior polishing, and, if necessary, paint correction and smart repair. All our vehicles have also undergone thorough maintenance. Of course, this includes fresh fluids, filters, and other maintenance tasks, so you don’t have to worry about anything. Optionally, we can present the vehicle at an independent inspection center or a workshop of your choice. We are pleased to have sparked your interest and are available around the clock for all your needs. If you have any questions, comments, or special requests, don't hesitate to contact us! More information and insights into our business philosophy at

Year of construction: 2022, condition: refurbished (used), functionality: fully functional, !!! Calibrated, we have two units in stock. Price is for one unit only !!! Volume: 161 l Disinfection routine: Optional Oxygen control: 1 - 18%, 22 - 80% Access port diameter: 30 Ltsdsxbiliepfx Affea Data logger: Yes CO2 sensor type: Infrared Chamber: Copper-enriched stainless steel Inner glass doors: 4 Humidity alert and monitoring package: No Minimum temperature: 26 Maximum temperature: 50 Touch screen controller: Yes Active humidification: No

Condition: used, This listing is for the Smeg GW1160S Lab Glassware Washer The unit is in full working condition and is ready for immediate use Key Features & Capabilities Thermal Disinfection: Heats up to 95 °C to deliver bactericidal cleaning for lab-grade glassware Programmable Control: Microprocessor-based electronic control with 9 preset programs and ability to store 6 custom cycles RS232 Connectivity: Integrates with external printers or PCs for traceability and logging Thermodynamic Drying: Equipped with active thermodynamic drying and a steam condenser (Ecoslim) featuring cold-water injection Construction & Design Internal Chamber: Made from AISI 316L stainless steel; robust, chemical-resistant, and easy to sanitize Exterior Finish: Panels constructed from AISI 304 stainless steel for durability and easy cleaning . Dual Wash Levels: Two independent rack levels on telescopic guides to accommodate varied glassware sizes Water & Chemical Handling Water Softener Built‑In: Includes a salt-sensing, auto-regenerating softener to prevent scale and enhance cleaning Dual Water Inlets: Compatible with both cold and demineralized water sources Detergent & Neutraliser Pumps: Comes standard with peristaltic pumps for alkaline powder detergent and acidic neutraliser; can optionally add more pumps Safety & Compliance Electronic Door Lock: Ensures the door remains securely locked during high-temp cycles Safety Thermostats & Alarms: Features multiple thermostats, interlocks, plus acoustic and visual alarms . Dimensions & Power Ltedpfsxhf Aqox Affsa External Footprint: Approximately 600 × 600 × 850 mm, suitable for standard 60 cm bench space Chamber Size: Internal dimensions ~ 525 × 490 × 570 mm (depth varies slightly by source) Power Supply: Standard: 3-phase 400 V, 50 Hz, max 7 kW .

Condition: new, capacity 90 degrees: round 310 mm capacity 90 degrees: square 280 mm 400x250 saw band length 4020x34x1,1 mm band speed 18 - 100 m/min table height 890 mm total power requirement 2,2 kW weight of the machine ca. 0,99 t dimensions of the machine ca. 1,85 x 2,2 x 2,0 m Miter band saw, fully automatic, GBS 310/400 VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Ljdpfx Afsd Iiprefeta Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm.

Year of construction: 2025, condition: new, Packaging machine for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, disinfection wipes. The production process includes folding and cutting the wipes, moistening with one or more different liquids, packaging the wet wipe in a 3-side sealed or 4-side sealed pouch. Production of up to 4 chain bags possible. Included is a dosing pump, a perforating tool, a tear notch tool, 2 character sets for cold and hot printing (14 characters each), an outfeed belt (1,2m). SIEMENS PLC and Touch-Monitor. - Specifications: Bag sizes: L(50-125)xW(50-110)mm; suitable films: PET, OPP,BOPP ,AL, PE, CPP, laminated films; suitable for dry nonwovens (airlaid, spunlaid); folds: max. 10 folds vertically and 4 folds horizontally; size of tissue, unfolded:L(40-220)xW(30-240)mm; Grammage wet wipe: 30-80g/m²; max. roll diameter: nonwoven: 1000mm, film: 350mm; filling range liquid: 0- 10ml; accuracy: +/- 0,5ml; max. speed of the machine in neutral: 110 single bags/minute (55 double bags); 5kW, 220V/380V; machine dimensions: L1000xW1500xH2000mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Ltjdpev Nmaqjfx Affja

Condition: used, Cold area with an annual capacity of 1,000 to 3,000 hl, consisting of 1 fermentation vat: Kaspar Schulz, 13.43 hl, year of construction: 2000 2 fermentation tanks: 1 x Kaspar Schulz, 24.22 hl, year of construction: 2000 1 x Kaspar Schulz, 42.19 hl, year of construction: 2000 4 storage tanks: 4 x Kaspar Schulz, 21.5 hl, year of construction: 2000 6 bright beer tanks: 6 x Kaspar Schulz, 11.22 hl, 3 bar, year of construction: 2000/2001 2 centrifugal pumps: 1 x Hilge, mobile, 15 m3/h, 2.7 bar, year of construction: 2000 1 x Hilge, mobile, 15 m3/h, 2.5 bar, year of construction: 2013 1 desi tank, 1 x cylindrical stainless steel tank on feet with side outlet, year of construction: 2000 with pipework and switch cabinet for automatic cooling system. Additional title: with centrifugal pumps and disinfection tub Ljdpfow Td Dljx Affeta Features: Fermentation vat, 2 x fermentation tank, 4 x storage tank, 6 x pressure tank, 2 x centrifugal pump, 1 x desi tank, pipework and control cabinet for refrigeration control

Condition: used, mileage: 203,000 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: mechanical, overall weight: 3,190 kg, first registration: 04/2019, emission class: euro6, color: white, number of seats: 9, total length: 5,339 mm, total width: 2,032 mm, total height: 2,324 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, For sale is a well-maintained Ford Transit Custom 9-seater L2 H2 with the globally popular 2.0-liter diesel engine. * The vehicle is in good condition! * German vehicle * Regularly serviced * Euro 6 compliance * One previous owner * New engine installed at 160,000 kilometers Equipment: * Long wheelbase + High roof L2 H2 * 9 seats * Air conditioning * Auxiliary heater * Cruise control * Front and rear parking sensors * Heated windscreen * On-board computer * Wheelchair accessible * Taxi meter * Electric exterior mirrors * Central locking * And much more... Technical data: Permissible total weight: 3,190 kg * Curb weight: 2,180 kg * Payload: 1,010 kg * Towing capacity: 2,350 kg Why choose us? Attractive financing through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair prices * Transfer plates (5-day/ customs registration) usually available on the same day * Pick-up service from the airport or train station All vehicles are professionally detailed and hygienically clean! Special features: Disinfection of the interior and ventilation system using ozone cleaning. * 2-stage exterior polish * Paint correction and smart repair if needed All our vehicles undergo thorough maintenance as well. Naturally, this includes new fluids, filters, and any other work that you shouldn’t have to worry about. Optionally, we can present the vehicle at an independent testing center or workshop of your choice. We are pleased to have sparked your interest and are available for you around the clock. If you have any questions, comments, or special requests, do not hesitate to contact us! More information, as well as insights into our business philosophy, can be found at Special equipment: Configuration with specific central locking, Visibility Package 1, Seat Package 2: Driver’s seat (4-way adjustable) – double co-driver's seat, artificial leather, auxiliary heater, thermal insulation glazing in the cargo/passenger compartment, medium tint Additional equipment: Ltsdpfx Afjw Hv Nhjfja Passenger side airbag, driver's airbag, active cornering lights, traction control (ASR), audio system: radio/CD player with multifunction display, exterior mirrors electrically adjustable and heated, turn signal integrated in exterior mirror, flooring: rubber in cargo/passenger compartment (full coverage), on-board computer, entry lights, electronic traction control, driver assistance system: hill start assist, emergency brake assist, crosswind assist, fixed window in cargo/passenger area: 2nd row left, 3rd row left, 3rd row right, B-pillar grab handle, front grab handles, lockable glove compartment, rear wing doors with windows, body/structure: high-roof van (standard), body variant: normal roof, black radiator grille, steering column (steering wheel) height/length adjustable, facelift model, engine 2.0 L – 125 kW TDCi CAT, front and rear park pilot system, radio preparation, 4 speakers, wheelbase 3,300 mm, tire pressure monitoring system, full-size spare wheel, emission standard Euro 6d-TEMP, adjustable interval wipers, H4 headlights, sliding door right side cargo/passenger area, front and rear mudguards, side protection strips, seats in

Condition: used, Year of construction: 2005, Overview  This aseptic PET filling line for fruit juices, beverages containing fruit juice and spritzers was built between 2005 and 2006 by the German manufacturer KHS. It is suitable for still and carbonated products (up to 5 g/l CO₂) - also with or without fruit fibers. The line covers all process steps from blowing to filling, labeling, packaging and palletizing and is designed for bottle sizes from 0.5 l to 1.5 l with various closure types. The nominal output is approx. 27,000 bottles per hour at 1.0 l still. The line will be in operation until approx. February/March 2026 and can be inspected by appointment. Technical details  Output: up to 27,000 bph at 1.0 l still Bottle sizes: 0.5 l - 1.5 l PET Products: Still beverages, carbonated up to 5 g/l, with or without fruit fibres Caps / neck finish: 26/22, 38 mm flat cap, sports cap possible Years of manufacture of the main machines: 2005-2006, individual units more recent (e.g. servo capper 2023, labeller 2013, winder 2017) Scope of delivery  Stretch blow molder KHS Blomax 16C (2005-2006), incl. chiller from Riedel Rinser KHS Bottle rinser FR-DR (ACF) 140 28/38 Filler KHS Innofill DNVF-PET ACF 100/15 SV, 100 filling stations, 15 capping stations, servo capper (2023) Nitrogen dropper from VBS, sterile tank, filling management from Eckel & Sohn, cap disinfection KHS Innoclean KR9 (flat cap) and SC4 Twin 28 S 04 (sports cap), cap disinfection KHS Innoclean KR9 (flat cap) and SC4 Twin 28 S 04 (sports cap). VBS, sterile tank, filler management KHS Metec Cap feeder Eckel & Sohn, cap disinfection KHS Innoclean KR9 (Flatcap) and SC4 Twin 28 S 04 (Sportscap) Cleanroom Cleanroom incl. ventilation system Fa. M&W, Zander/Smardt OPK Transport technology Container and air transport KHS, Lanfranchi Inspection Full bottle inspection Heuft Squeezer Labeling Krones Starmodul (YOM 2013) with Contiroll + 2x AutoCol units + dryer Krones Linadry Label inspection unit Heuft FinalView Packaging Tray/Shrink packer KHS Kisters Innopack TSP 050 V TPFO Wrap Around Packer KHS Kisters Innopack 320/70 (BJ 1999) Carry handle applicator KHS Carry Strip Master CSM 050- 2 Palletizing & wrapping Palletizer KHS Innopal Markant 1BSH2-PL + Innopal Markant 1BSH2/1-PL (both year 1999) Wrapper Haloila Octopus 1845S (year 2017, currently at a different location) Ltsdpfx Aewzlb Neffea

Condition: used, This listing is for the Binder BF115 Incubator The unit is in full working condition and is ready for immediate use BINDER BF 115 – e Series Forced Convection Incubator The BINDER BF 115 incubator from the e series is designed for precise and gentle incubation applications in laboratories where performance, uniformity, and reliability are critical. Work particularly well under a full load and large batch throughputs. This incubator is extremely homogeneous and has quick recovery time. Key Performance Features Temperature Range: Ambient +8 °C to 100 °C – ideal for a wide variety of microbiological, bacteriological, and stability testing. Excellent Uniformity & Stability: ±0.3 K uniformity at 37 °C ±0.1 K fluctuation at 37 °C Lsdpfx Aoxhfz Teffeta ±1.6 K uniformity at 100 °C Fast Heating & Recovery: Heats to 37 °C in ~8 minutes Recovers in ~3 minutes after a 30-second door opening Design & Control Highlights e™ Technology: Ensures uniform temperature distribution across all shelves – even with full chamber loads. Forced Air Convection: Enables efficient heat transfer and consistent conditions throughout the chamber. Disinfection Routine: Built-in 100 °C sterilization cycle for internal decontamination. User Interface: Intuitive LCD controller with programmable timer, USB port for data logging, and electromechanical exhaust flap control. Safety Thermostat: Class 3.1 safety (DIN 12880 compliant) with visual alarm for over-temperature protection. Internal Viewing: Transparent inner glass door allows sample observation without disturbing internal environment. Technical Specifications Feature Details Chamber Volume 114 liters Temperature Range Ambient +8 °C to 100 °C Internal Dimensions 550 × 550 × 380 mm (W×H×D) External Dimensions 710 × 725 × 605 mm (W×H×D) Power Supply 230 V, 0.4 kW, 6.3 A fuse (also available in 120 V) Noise Level 43 dB(A) typical Weight ~54 kg Shelves 2 chrome-plated shelves (up to 5 possible) Energy Consumption ~60 Wh/h @ 37 °C; ~235 Wh/h @ 100 °C Applications & Benefits Use Cases: Ideal for microbiology, bacteriology, tissue culture, stability testing, and pharmaceutical incubation. Scalable Performance: Optimized for full load conditions and large batch throughput without compromising performance. User-Friendly: Stackable, ergonomic handle design, easy-to-clean stainless steel chamber with no fixed fixtures. Highly Reliable: Rapid recovery and precise temperature regulation for reproducible results, even with frequent door openings.

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm Ljdpfsfgyicex Affeta 450x320 saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

Year of construction: 2025, condition: new, Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The line is constructed from a wet wipe production unit, a flow wrap unit and a unit for applying the reclosable lid. Wet wipes production process: Unwinding of the nonwoven from 2 jumbo rolls and slitting into 5 lanes per roll (until moistening) for a fast production method, longitudinal folding in Z or C-shape, moistening via several spraying nozzles, cross cutting (wipes length), stacking and forwarding to the packaging unit. The flow wrapping unit handles: feeding the wet wipes, feeding the film and printing (hot stamping), hole punching (to open the pack), positioning the reclosable label and e.g. a seal label (the integrated 2-lane labeler allows offset labeling), bag cutting/heat sealing and feeding to the lidding unit. The liquid supply system for moistening the wipes consists of 2 tanks with continuously mixing agitators and a liquid recycle unit. - Specifications: suitable for dry nonwovens (airlaid, spunlaid); folds: Z or C shape (change of folding tool necessary); fold face adjustable per side; dimensions of folded tissue: L(120-220)xW(90-110) mm; dimensions of unfolded tissue: L(120-220)xW(150-220) mm; number of wet wipes per pack (min. to max.): 30-120 pieces; grammage wet wipe: 40-80g/m²; speed of the machine in neutral: max. 5600 wipes/minute or max. 60 packs/minute; bag size: depending on folding dimensions and number of wipes per pack; film roll dimensions: width max. 360 mm, diameter: max. 400 mm; suitable films: OPP film (transparent, printed or laminated); nonwoven jumbo roll dimensions: width 800-1320 mm, diameter max. 1200 mm; label roll dimensions: width max. 60 mm, diameter max. 300 mm; lid dimensions: Width max. 80mm, length max. 120mm; dimensions tank for liquid: 900x900x1900mm; dimensions packing line: L16273xW5404xH2350 mm; total weight: about 12000kg; power: 27kW, 380V, 3-phase. The photo only shows the main machine (wet wipes production). Gladly we will send pictures of the packaging and lid closing unit on request. Lodpsv Nma Djfx Affeta Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, This listing is for the Binder BF115 UL Incubator / Oven The unit is in full working condition and is ready for immediate use BINDER BF 115 UL – Forced Convection Incubator The BINDER BF 115 incubator from the e series is designed for precise and gentle incubation applications in laboratories where performance, uniformity, and reliability are critical. Work particularly well under a full load and large batch throughputs. This incubator is extremely homogeneous and has quick recovery time. Key Performance Features Temperature Range: Ambient +8 °C to 100 °C – ideal for a wide variety of microbiological, bacteriological, and stability testing. Excellent Uniformity & Stability: ±0.3 K uniformity at 37 °C ±0.1 K fluctuation at 37 °C ±1.6 K uniformity at 100 °C Fast Heating & Recovery: Heats to 37 °C in ~8 minutes Recovers in ~3 minutes after a 30-second door opening Design & Control Highlights e™ Technology: Ensures uniform temperature distribution across all shelves – even with full chamber loads. Forced Air Convection: Enables efficient heat transfer and consistent conditions throughout the chamber. Disinfection Routine: Built-in 100 °C sterilization cycle for internal decontamination. Lodjxhfz Hepfx Affeta User Interface: Intuitive LCD controller with programmable timer, USB port for data logging, and electromechanical exhaust flap control. Safety Thermostat: Class 3.1 safety (DIN 12880 compliant) with visual alarm for over-temperature protection. Internal Viewing: Transparent inner glass door allows sample observation without disturbing internal environment. Technical Specifications Feature Details Chamber Volume 114 liters Temperature Range Ambient +8 °C to 100 °C Power Supply 120 V, 12.5 A fuse (NB At this time we also have in stock 230 V See BF115) Noise Level 43 dB(A) typical Weight ~54 kg Shelves 2 chrome-plated shelves (up to 5 possible) Applications & Benefits Use Cases: Ideal for microbiology, bacteriology, tissue culture, stability testing, and pharmaceutical incubation. Scalable Performance: Optimized for full load conditions and large batch throughput without compromising performance. User-Friendly: Stackable, ergonomic handle design, easy-to-clean stainless steel chamber with no fixed fixtures. Highly Reliable: Rapid recovery and precise temperature regulation for reproducible results, even with frequent door openings.

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 500 x 310 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 4250 x 34 x 1,1 mm total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions of the machine ca. 1,4 x 2,4 x 1,935 m ACTION PRICE!!! 2-column double miter band saw K-tech DG 50/33 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to bevel cut, feed controller + cutting pressure controller • Massive material infeed roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to bevel cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large dimensioned wheels (520 mm) a. • Clear miter setting up to 60° Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material Lsdpfjfg E Hlox Affeta 6. Open the vise

Condition: new, Year of construction: 2025, Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The production process includes unwinding of the nonwoven from the jumbo roll, slitting for a 2-lane production process (until packaging), dipping into liquid, longitudinal folding in Z- or W-fold, cross cutting (tissue length), 1 x cross folding, stacking, continue to packaging unit which handles film feeding and wrapping wet wipes, punching the hole (to open the pack), positioning of reclosable label, bag cutting/heat sealing. Integrated splice units increase efficiency during material, film and label role changeover. - Specifications: suitable for dry nonwovens (airlaid, spunlaid); folds: Z or W shape (change of folding tool necessary); fold face adjustable per side; dimensions of folded tissue: L(70-100)xW(40-100) mm; dimensions of unfolded tissue: L(140-200)xW(140-200) mm; number of wet wipes per pack (min. to max.): 5-30 pieces; grammage wet wipe: 35-80g/m²; speed of the machine in neutral: max. 900 wipes/minute or max. 90 packs/minute; bag size: depending on folding dimensions and number of wipes per pack; film roll dimensions: width max. 280 mm, diameter: max. 400 mm; suitable films: OPP film (transparent, printed or laminated); nonwoven jumbo roll dimensions: width 280-400 mm, diameter max. 1200 mm; label roll dimensions: width max. 60 mm, diameter max. 300 mm; power: 25kW, 380V; machine dimensions: L8500xW1520xH2350 mm; weight: 5000kg. Ltedov Nma Ropfx Affea Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 870 mm band speed 18 - 110 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 250 Super VA-I MPS • Miter left. 45° automatic operation • Miter left. 60° semi-automatic operation (cuts without programming) • Shockproof and ergonomic control panel with oil-proof EPDM cover a. • Material height sensor c. (Automatic cut start detection) • Frame and gearbox made from one piece, very quiet cutting and very low vibration Ltsdpfx Afed Iip Asfea • Chip tray can be removed (disinfection) • Easy access to the saw, material and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic. Cut! Saw automatically with microprocessor control Adjustable for 2 program levels Semi-automatic operation Fully automatic operation Start after entering the desired number and length: material cut- Cutting execution and piece counting until the program is fulfilled • MPS control for entering the desired number of feeds • All important machine data is shown on the LED display during the Cutting process displayed (power consumption, cutting time, number of pieces) • The entered data is in RAM memory • The autodiagnostic circuit automatically shows all irregularities as an error message and checks the entire process • Feed unit mounted floating. • Length adjustment via handwheel and vernier with mechanical position indicator. Adjustable for section lengths from 2.5 mm to 420 mm or through Automatic reversing can be repeated 1 - 29 times, remaining piece length 210 mm

Condition: new, Year of construction: 2025, Sample filling system of a disinfection liquid bottle filling line for smaller bottles with a filling volume of up to 100ml. The fully automatic filling process includes: Aligning and feeding of the bottles; filling with 2 to 8 filling heads and with high accuracy by anti-drip device; automatic alignment, feeding and capping of the lids / spray caps, single or double sided labeling of the bottles; outfeed and collection of the bottles to a collection table or to the next production station. -Specifications: number of filling nozzles: 4 (can be customized for a surcharge); number of heads for lid positioning and capping: 1, each (can be customized for a surcharge); filling range: 30-100ml; dosing method: by piston pump; accuracy: +/- 1%; speed: max. 2000 bottles/hour, at 100ml max. 500 bottles/hour; label size: L10-350mm, W10-200mm; product contact parts are made from corrosion-resistant AISI 316 stainless steel, plastic/rubber parts are food grade. Dimensions and total weight of the line depend on the actual layout. Please note: This is only an example system. Final specifications may vary. Ledpfx Afjv Nlbgjfsta Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350x200 saw band length 3375x27x0,9 mm band speed 18 - 100 m/min table height 880 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,84 t dimensions of the machine ca. 1,85 x 1,9 x 2,0 m Demonstration system for a SPECIAL PRICE!! Fully automatic miter band saw Ljdpfx Aoupw R Ajffeta • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start recognition) • Frame and gear made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm. Inclusive: - Micro-spray device - Leveling elements

Condition: new, Year of construction: 2025, Packaging line for the production and packaging of wet wipes, e.g. hygiene wipes, cleaning wipes, baby wipes, disinfecting wipes. The line is constructed from a wet wipe production unit and a flow wrap unit. Wet wipes production process: Unwinding of the nonwoven from 2 jumbo rolls and slitting into 5 lanes per roll (until moistening) for a fast production method, longitudinal folding in Z or C-shape, moistening via several spraying nozzles, cross cutting (wipes length), stacking and forwarding to the packaging unit. The flow wrapping unit handles: feeding the wet wipes, feeding the film and printing (hot stamping), hole punching (to open the pack), positioning the reclosable label and e.g. a seal label (the integrated 2-lane labeler allows offset labeling), bag cutting/heat sealing. The liquid supply system for moistening the wipes consists of 2 tanks with continuously mixing agitators and a liquid recycle unit. - Specifications: suitable for dry nonwovens (airlaid, spunlaid); folds: Z or C shape (change of folding tool necessary); fold face adjustable per side; dimensions of folded tissue: L(120-220)xW(90-110) mm; dimensions of unfolded tissue: L(120-220)xW(150-220) mm; number of wet wipes per pack (min. to max.): 30-120 pieces; grammage wet wipe: 40-80g/m²; speed of the machine in neutral: max. 5600 wipes/minute or max. 60 packs/minute; bag size: depending on folding dimensions and number of wipes per pack; film roll dimensions: width max. 360 mm, diameter: max. 400 mm; suitable films: OPP film (transparent, printed or laminated); nonwoven jumbo roll dimensions: width 800-1320 mm, diameter max. 1200 mm; label roll dimensions: width max. 60 mm, diameter max. 300 mm; dimensions tank for liquid: 900x900x1900mm; dimensions packing line: L13998xW5404xH2350 mm; total weight: about 10600kg; power: 19kW, 380V, 3-phase. The photo only shows the main machine (wet wipes production). Gladly we will send pictures of the flow wrap packaging and lid closing unit on request. Ltsdpfxsv Nmawo Affja Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, capacity 90 degrees: round 510 mm capacity 90 degrees: square 450 mm 650x450 band speed 15 - 100 m/min table height 844 mm dimensions of saw-band 5320 x 34 x 1,1 mm total power requirement 3,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,9 x 2,87 x 1,3 m Ltedpjd Iipmsfx Affja PROMOTIONAL PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Solid, yet easy to use • Material height sensor (automatic cut start detection) • Smooth running thanks to diagonal cutting, feed regulator + cutting pressure regulator • Solid material inlet roller • Removable chip tray (disinfection) • Energy-saving and low-vibration thanks to diagonal cutting • Control panel ergonomic, safe and free-standing • Frequency-controlled saw drive 15 -100 m/min. • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vice • LEDs for monitoring all safety functions • Large-sized wheels (520 mm) a. • Clear miter adjustment up to 60° Semi-automatic function: 1. Tension the material 2. Saw starts 3. Lowering in rapid traverse to the beginning of the material or the same for series cutting cut 4. Saw blade off 5. Raise the frame until it is just above the material 6. Vice opens

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 870 mm band speed 18 - 110 m/min Control CNC total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 255 Super VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High performance positioning with incremental encoder (CNC) c. • Top access to the saw, material and feed unit • Hinged safety cover Lodpfxed Iipzs Affota • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm.