Used Timber Rounding Machine for sale (65,743)

Condition: new, Year of construction: 2026, Kudu automatic drilling machine with NC control and manual tool change (3-axis) automatic drilling machine with a mobile processing unit - the table remains stationary, the drilling head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The system is programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,000 mm • Stable machine base • Drilling head speed: up to 2800 rpm • Tool holder: HSK 50 • Drive of the X, Y and Z axis via servomotors • Rapid traverse in the X Axis: 18 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance between the top edge of the table and the bottom edge of the tool holder 245 mm • Table width 450 mm • Working height: 1005 mm • Drilling diameter: 3 to 15 mm in St. 50 (depending on the tool) • Machining path in the Y-axis: 230 mm • Tolerance in the X-axis: +- 0.1 mm/m • Tolerance in the Y-axis: +- 0.05 mm • Tolerance in the Z-axis: +- 0, 05 mm • System weight: 2000 kg • System dimensions: 8000 mm x 2000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Simple programming of the machine • Cooling takes place by means of a minimum quantity spray system • Without material clamping vices • Digital hand wheel Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming and operation Csdjfu Iwmopfx Ailegw It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, The drilling machine can be used both manually and fully automatically. After each drilling process, the system moves fully automatically in the X and Y axes to the next drilling position in the standard version. ADVANTAGES Potential operator errors are drastically reduced. Programming takes just a few minutes. Significant reduction in manpower. product details Standard measuring lengths: 3,000mm 6,000mm Drill: Unimax 3 T AV (alternatively also with Unimax 4 Basic) Continuous drilling capacity in E 335 25 mm Normal drilling capacity 30 mm Thread cutting capacity M 20 Spindle MT 3 Automatic feeds (3T AV) 30 – 400 mm/rev Drilling depth 125 mm Column diameter 110 mm Weight 250kg Pole-changing motor 0.8/1.5 kW UNIMAX 3T/3T AV M00023/M00009 Spindle speeds infinitely variable Range A 80 – 1,400 rpm Range B 180 – 3,200 rpm motorized height adjustment, anti-twist device Optional: thread cutting device Cgsdjfu Swxspfx Ailsw Fully automatic execution Automatic positioning of the X-axis Automatic positioning of the Y-axis Automatic drilling process Total length: 7,500mm Manual drilling is possible Coordinate table with motorized drive for the Y-axis via the control Travel of the Y-axis 200 mm Movable clamping table with motorized drive for the X-axis via the control X-axis travel: 3,000 mm Clamping table with groove for clamping the pneumatic clamping pieces and material support blocks. 2-axis control with memory control with 3,000 memory options Minimum quantity spray system with spray head and holder It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, UNIBOHRFIX 100 E Fully automatic drilling machine, measuring length 6000mm (2-axis NC drilling machine) Item No. 6019 With the fully automatic drilling machine UniBohrFix 100, your material is positioned on the X-axis at the desired position, clamped and drilled. All you have to do is press the start button. Round tubes, rectangular tubes and angle profiles, as well as flat and solid materials, can be conveniently pneumatically clamped in the horizontal gripper of the positioning system. After simply entering the X and Y values ​​or calling up a program that has already been written, the machine works completely independently. Advantages • A sequence of holes is automatically executed at precise intervals. • Potential operator errors are drastically reduced. • Programming takes just a few minutes. • Very good value for money. • Significant reduction in labor force Fully automatic execution Measuring length: 6,000 mm Total length: 13,500mm NC 2-axis control incl. LAN interface for data transmission Pneumatic vice (span 200 mm) Alternatively also available with 300 mm. Minimum quantity spray unit with holder and spray nozzle Drill: Unimax 3T AV Alternatively also with Unimax 4 Basic (For technical data see data sheet) anti-rotation device tapping device motorized height adjustment NC positioning system PD 200p Feed force 200 kg Positioning according to absolute and incremental dimensions possible Carriage with DC servo motor and encoder Trolley with 12 ball bearings Pneumatic stop clamping with high holding power Steel guide rail with precision toothed rack Steel carrier profile as dirt protection Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / load capacity 200 kg/m / rollers adjustable in height / Mounting bracket / roll width 407 mm / insert plates / struts Roller diameter 50 mm / steel rollers Cedpfofu Irzjx Ailegw It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: new, Year of construction: 2026, UNIBOHRFIX 100 H Fully automatic drilling machine, measuring length 6000mm Item No. 6020 With the fully automatic drilling machine UniBohrFix 100, your material is positioned on the X-axis at the desired position, clamped and drilled. All you have to do is press the start button. Round tubes, rectangular tubes and angle profiles, as well as flat and solid materials, can be conveniently pneumatically clamped in the horizontal gripper of the positioning system. After simply entering the X values ​​and calling up a program that has already been written, the machine works completely independently. The Y-axis can be adjusted by the operator using a handwheel with a digital display. Advantages • A sequence of holes is automatically executed at precise intervals. • Potential operator errors are drastically reduced. • Programming takes just a few minutes. • Very good value for money. • Significant reduction in labor force Cedpfefu Itbsx Ailogw Fully automatic execution Measuring length: 6,000 mm Total length: 13,500mm NC 1-axis control Pneumatic vice (span 200 mm) Minimum quantity spray unit with holder and spray nozzle Drill: Unimax 3T AV (for technical data see data sheet) anti-rotation device motorized height adjustment tapping device NC positioning system PD 200p Feed force 200 kg Positioning according to absolute and incremental dimensions possible Carriage with DC servo motor and encoder Trolley with 12 ball bearings Pneumatic stop clamping with high holding power Steel guide rail with precision toothed rack Steel carrier profile to protect against dirt Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / load capacity 200 kg/m / rollers adjustable in height / mounting bracket / roller width 407 mm / insert plates / struts / roller diameter 50 mm / steel rollers

Condition: new, Year of construction: 2026, SEMI-AUTOMATIC DRILLING RIG “UNIBORFIX 50” With the UniBohrFix 50 drilling system, all profiles can be machined against a stop or with grippers. The Drilling is done manually using the lever, with the materials on the X-axis automatically pointing to the drive to the next drilling position. Easily drill entire programs or work with the stop plate quickly carry out individual drillings. The system is suitable for weights up to 100 kg. The facility also contains a minimum quantity spray unit with holder and spray can. The technical data of the standard version can be found in the table. If necessary, all components of the system can be adapted to your requirements. You can choose between different drilling machines, roller conveyors, select positioning systems and vices. Plantec configures the system so that it suits you perfectly! ADVANTAGES A sequence of holes is automatically executed at precise intervals. Potential operator errors are drastically reduced. Programming takes just a few minutes. Very good value for money. Significant reduction in manpower. Standard measuring lengths: 3,000mm 6,000mm Drill: Unimax 2 T Spindle MK2 Continuous drilling capacity 18 mm Speed ​​ranges: 100-2000rpm, 200-4000rpm Projection 225 mm Spindle/table distance 60-400 mm Adjustable vice with measuring linear display Positioning length stop: PD-100e control for automatic positioning Positioning: absolute or chain dimensions Easy to read LED display Trolley with DC servo motor Positioning accuracy +/- 0.1 mm/m Attachment arm with spring damping Stop plate with groove Cgsdpogwt Slofx Ailow Memory control with 3,000 memory options Roller conveyors: RD-200/3 load capacity 200 kg/m Roll width 290 mm Roll diameter 40 / 50 mm insert sheets Struts for stabilization switch cabinet Available options: Minimum quantity spray system with spray head and holder Gripper tongs for clamping the material on the stop plate

Condition: used, Esterer round timber intake, 4-strand with feed table with separator with inserter Cgjdoyxz U Tepfx Ailsw complete with chains and motors Total conveyor length: approx. 6.8 m Total width: approx. 7.5 m Already dismantled Location: Austria, near Graz (Internal number: 10br12)

Condition: excellent (used), Rounding machine tool for poles/stakes production. Diameter of finished product from 40 mm to 140 mm. Machine tool was renovated. New bearings, new back side shoulders gears, renovated electrical cabinet and installed new optical sensor for pneumatic pressure, partly renovated pneumatic system (3 new cylinders). Cgsdsuvg Htjpfx Ailsw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1760x1150x1320 mm Weight 1100 kg Total power requirement 4,5 kw Cjdpov A Hykjfx Ailsgw

Condition: new, number of rollers: 3, roller (bottom) diameter: 76 mm, roller (top) diameter: 76 mm, side roll diameter: 76 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, swiveling upper roller, - Capacity: 1270 x 1.5 mm - Conical rollers - Removable top roller - Foot control Cgjdpfx Aieh Ralqjljw - Emergency stop - Documentation - 400V

Condition: new, Year of construction: 2026, functionality: fully functional, Labeling system for round and square canisters Stainless steel frame 170 mm wide link chain (optionally wider possible) Standard label width 140 mm or 190 mm, optionally up to 260 mm possible Codpfx Aeu Ia E Ieilegw Label length 300 mm, optionally longer Dispensing speed up to 30 m/min., optionally 50 m/min Product diameter according to technical testing from 20 mm - 170 mm, optionally other sizes possible Touch screen display, with storage option Label dispenser with three-dimensional adjustment option Product separation with two-sided belts Product alignment for square bottles Top belt guide for square and oval products Other labeling options, such as lid labeling, seal labeling, bottom labeling, etc.

Condition: new, Year of construction: 2026, max. working width: 1350 mm workable material thickness: 0,5 - 80 mm Infinitely variable feed speed: 0,5 - 6 m / min Length: mm Width: mm Height: mm Machine weight: kg Standard configuration Csdpfex S Dxbjx Ailogw Extended machine accessories

Condition: new, Year of construction: 2025, number of rollers: 3, roller (bottom) diameter: 130 mm, roller (top) diameter: 130 mm, side roll diameter: 130 mm, roller length: 1,070 mm, sheet thickness steel (max.): 5 mm, Equipment: cone bending device, documentation/manual, emergency stop, foot remote control, hardened rollers, swiveling upper roller, - Capacity: 1070 x 5 - Electrically adjustable idler roller - Digital display for rear roller movement - Hardened rollers - Conical rollers - Rotatable top roller - Brake motor - Foot control - Emergency stop Cgsdpfoirwlaox Ailjw - Documentation - 400V

Year of construction: 1989, condition: excellent (used), control Siemens 840D solution line Grinding length outside max. 400mm Inner grinding length 200mm Grinding wheel diameter: max. 400mm Grinding wheel width: max. 63mm Outside grinding diameter 150mm Inner grinding diameter 200mm Cgodpfxjfwx A Ss Ailsw Tailstock travel: 400mm General overhauled in 2016 !

Year of construction: 1985, condition: good (used), machine/vehicle number: xxxx, Technical specifications: - Bending and rolling processes performed manually, - Max. working width: 1020 mm Codjf S Tg Tspfx Ailsgw - Max. material thickness (St 40): 1.25 mm - Bending angle adjustment via end stop: 10 - 180° - Max. stroke of the upper die: approx. 85 mm - Max. adjustability of the bending die: 20 mm - Shaft diameter: 55 mm - Upper shaft can be pivoted outwards - Rear shaft can be adjusted parallel and at an angle - Space requirement: approx. W 1500 x H 1400 x D 750 mm - Weight: approx. 400 kg

Condition: new, Year of construction: 2026, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 220 mm, roller (top) diameter: 220 mm, side roll diameter: 180 mm, roller diameter: 220 mm, roller length: 2,070 mm, sheet thickness steel (max.): 10 mm, overall weight: 4,900 kg, total length: 4,050 mm, total width: 1,550 mm, total height: 1,470 mm, input voltage: 400 V, number of digital displays: 3, Equipment: centralized greasing system, cone bending device, documentation/manual, emergency stop, hardened rollers, - 4 rolls - Capacity 2070 x 10 - Bending capacity 2070 x 8 - Hardened rollers - Diameter above roller 220 mm - Diameter under the roll 220 mm - Side roller diameter 180 mm - Hydraulic Cgedpju Evqhsfx Ailsw - Digital display for the left roller movement - Digital display for the movement of the lower middle roller - Digital display for the movement of the right-hand roller - The top roller can be folded out hydraulically - Steel construction ST-52 - Hydraulic drop end for easy roller positioning - Hydraulic up and down movement system with center and side rollers - Hydraulic balancing system - Overload protection - Documentation - 400V

Condition: new, Year of construction: 2025, HEAD CORNER ROUNDING MACHINE Codpfx Ajkx Hp Eoilegw MAGRAF RA-1

Condition: new, DM1100 ZC are metal deburring and edge rounding machines for metal sheet and parts cut by punching, shearing, laser or plasma. Removing burrs and creating round edges using cross belts technology is possible on parts up to 1100mm width and on some as small as 50x50mm. Cgjdpfx Aied Hintjlow Inside and outside contours of stainless steel, steel and aluminum parts cut by laser or other thermal processes are burrs cleaned from the total surface. Technical Details - DM1100 ZC: Working capacity (mm) 1100x100 No. belt stations (Z) 1 No. cross belt stations (C) 1 Abrasive belt dimensions (mm) 1100x2200 Abrasive belt speed (m/s) 10 Cross belt speed (m/s) 8 Feeding speed (m/m) 0.9-13 Abrasive belt motor per head (kW) 18.5 Cross Belt Motor (kW) (2x) 3 Feeding motor (kW) 0.37 Total power (kW) 26.22 Consumption (A) 55 Dust extraction connection per head (Ø mm) (2x) 150 Dimensions (mm) 2230x2300x2250 Weight (kg) 3300

Condition: new, Year of construction: 2026, max. working width: 1330 mm workable material thickness: 0,5 - 80 mm Infinitely variable feed speed: 0,5 - 6 m / min Grinding belt dimensions: 1910 x 1350 mm Sand rolling brush size: 300 x 400 mm Sandbelt line speed: 18 m / s Number of roller-brush planetary revolution shaft heads: 8 pcs. machine thickness servo adjustment precision: 0,01 mm Length: 4200 mm Width: 2300 mm Csdpfxoygx A As Ailjgw Height: 2400 mm Machine weight: 6500 kg Electrical connected load: 89 kW Standard configuration Machine configuration:1st station: Sanding belt2nd station: Brush elementsOptional 3rd station: Sanding belt or polishing station Main components:PLC: SiemensTouchscreen: SiemensLow-voltage devices: SchneiderFrequency converter: SchneiderSuction fan: Elektror, Germany Machine with wet vacuum cleaner Extended machine accessories

Condition: new, - Capacity: 700 x 2 mm - Conical rollers - Removable top roller - Foot control Cjdpfsihv Hpox Ailsgw - Emergency stop - Documentation - 400V

Condition: new, – Capacity: 1070 x 2 mm – Conical rollers – Removable top roller – Foot control Cgjdohc Uvmspfx Ailjw – Emergency stop – Documentation – 400V

Condition: new, roller (bottom) diameter: 140 mm, roller (top) diameter: 140 mm, side roll diameter: 140 mm, roller diameter: 140 mm, roller length: 2,070 mm, sheet thickness steel (max.): 4 mm, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, - Capacity: 2070 x 4 - Electrically adjustable follower roller - Electrically adjustable lower roller (material clamping) - Digital display for the movement of the rear roller - Digital display for lower roller movement (material clamping) - Infinitely adjustable speed - Hardened rollers - Tapered rollers - Removable top roller Csdshvr Nlopfx Ailogw - Brake motor - Emergency stop - Documentation - 400V

Condition: new, Year of construction: 2025, - Capacity: 1070 x 5 mm - Electrically adjustable rear roller Cjdjgg Nv Sopfx Ailogw - Electrically adjustable bottom roller (for material clamping) - Digital display for rear roller movement - Hardened rollers - Tapered rollers - Emergency stop - Documentation - 400V

Condition: new, Year of construction: 2025, roller diameter: 180 mm, - Capacity 2070 x 8 mm (minimum diameter 900 mm) 2070 x 6 mm (minimum diameter 270 mm) Pre-bending capacity 2070 x 6 (minimum diameter 900 mm) Pre-bending capacity 2070 x 4 (minimum diameter 270 mm) - 4 rollers - Hydraulic - Hardened rollers - Diameter of upper roller 180 mm Cgsdpfx Aevn Eqreilew - Diameter of lower roller 180 mm - Diameter of side rollers 150 mm - Digital display for the movement of the left roller - Digital display for the movement of the middle lower roller - Digital display for the movement of the right roller - Upper roller is hydraulically foldable - Steel construction ST-52 - Hydraulic drop end for easy roller positioning - Hydraulic up and down Removal system with middle and side rollers - Hydraulic balancer system - Overload protection - Documentation - 400V

Condition: used, Eckenrundstossmaschine / Corner Rounding machine Tränklein EK Serial-No. ET104-1 Cjdpfx Aioxlu E Ajlogw Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Buchrückenrundemaschine - Book Back Rounding Machine La Fornigrafica Dorsi 500 Year 2005 Working width max. 500mm Thickness of books 0 - 100mm Output 400 - 600 Blocks/hour Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Cgodpfx Aiewhgcuslsw