Used Timber Construction for sale (18,466)

Condition: used, mileage: 628,354 km, power: 335 kW (455.47 HP), first registration: 11/2019, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 11/2026, color: green, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, If desired, the tractor unit can also be sold separately. Mercedes Arocs 2546 6x4HAD (Vehicle number: 11765) Cab: L-cab StreamSpace, 2.30 m, tunnel 170 mm * Cab suspension, comfort, air-sprung * Cab rear wall, without window * Storage compartment exterior flap, left * Exterior sun visor, transparent * Air horn * Roof strobe light * Locking system, with central locking * Comfort locking system ----* Touchscreen radio unit with Bluetooth hands-free system * MB FleetBoard * Rear view camera * Automatic climate control * Waste heat recovery system * Auxiliary water heater, cab * Electric auxiliary heater * Construction site filter * Storage compartment lid, driver and passenger side * Drawers, under bed & under console * Stowage flaps, above windshield * Lifting roof, electric * Refrigerator, in drawer, under bed ----Electrical and electronics: Additional socket 12 V/15 A, passenger footwell * Power socket 24 V/25 A, passenger footwell * Socket 24 V/15 A, in side panel compartment, right * Additional functions, for body manufacturer * Trailer socket 24 V, 15-pin * Reverse warning system ----Safety and assistance systems: Stability control assistant * Roll stability assistant * Lane keeping assistant * Distance keeping assistant * Attention assist Chjdpfx Ajz Dzqtofgjc * Active Brake Assist 4 * Airbag, driver * Speed limiter 90 km/h / 56 mph, ECE * Cruise control ----Engine: Engine OM470, R6, 10.7 l, 335 kW (455 hp), 2200 Nm * Engine version Euro VI, D (Truck) * High Performance Engine Brake * Air compressor, 2 cylinders * Insect screen, in front of cooler * Water pump, regulated ----Powertrain: Twin-plate clutch * Transmission G 281-12/14,93-1,0 * Hydraulic Auxiliary Drive (HAD) ----Chassis: Leaf/air suspension * Tag axle, steered & liftable * Fifth wheel coupling with Doumatik ----Palfinger M10L80 crane on 2-axle semi-trailer: * 2 hydraulic supports * 4 adjustable timber stakes (ECCO ALU 4) * Elevated platform * Timber grapple * Year of manufacture: 2019 * Operating hours: 4459 hours * Next inspection: Technical data * Tire dimension front axle: 385/65R22.5 * Tire dimension rear axle: 315/80R22.5 * Fuel tank: 510 liters * AdBlue tank: 60 liters * Technical gross vehicle weight: 26000 kg * Tare weight: 13630 kg * Permissible trailer load: 35000 kg * Overall length: 10200 mm * Next inspection due: 05.2026 -----Janzen System T19 tandem timber trailer (Vehicle number: 11676) * 4 adjustable timber stakes ECCO ALU 4 * Wabco SmartBoard * SAF axles with disc brakes * First registration: 01.11.2019 * Overall length: 7650 mm * Permissible/technical gross vehicle weight: 18000/19000 kg * Tare weight: 2950 kg * Tire dimension: 385/65R22.5 * TÜV (German technical inspection): 11/2026 * Next inspection due: Vehicle number/Vehicle: 11675+1167----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We are happy to assist you with all the formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----* Trade-in of your old vehicle * TÜV/SP inspection * Complete export processing * Arranging financing * Applying for export license plates * Vehicle transportation * Vehicle registration * Recovery and vehicle transport ----YOUR VTS TEAM

Condition: used, mileage: 468,800 km, power: 206 kW (280.08 HP), first registration: 06/2003, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro3, total width: 2,550 mm, Equipment: ABS, crane, MAN LE 18.280 | Flatbed | HIAB 133 K PRO/HIPRO Crane | 18 t | 4x2 Vehicle Description: For sale is a MAN LE 18.280 equipped with a flatbed and a powerful HIAB-HIPRO crane. This is a robust piece of equipment, ideal for construction sites, timber handling, steel, containers, and more. The vehicle is mechanically sound, the crane is fully functional, and on-site demonstration is possible. Vehicle Data: • First registration: 06/2003 • Mileage: approx. 468,800 km • Engine power: 206 kW / 280 hp • Displacement: 6,871 cm³ • Fuel type: Diesel • Transmission: Manual • Drive: 4x2 • Emission class: Euro 3 • Emissions sticker: None (green not possible) • Gross vehicle weight: 18,000 kg • Unladen weight: approx. 9,320 kg • Payload: approx. 8.7 t • Cab: Day cab Crane / Superstructure - HIAB 133 K PRO/HIPRO: • Multiple extensions (telescopic boom) • Outriggers at the sides and rear • Crane operational and can be demonstrated • Flatbed with drop sides Equipment: • ABS • No EBS • No ESP • Cloth seats • Dual passenger bench • Radio pre-installation • 24-Volt system • Durable and straightforward technology For further information, please feel free to contact us. Csdpfxsx Hb Rko Afgshc

Condition: excellent (used), functionality: fully functional, Year of construction: 2015, operating hours: 4,349 h, load capacity: 4,000 kg, lifting height: 6,000 mm, free lift: 1,920 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 2,750 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,320 mm, fork length: 1,200 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200 X 50 - 10, rear tire type: cushion tires (black), rear tire size: 27 X 10 - 12, overall weight: 10,500 kg, empty load weight: 6,500 kg, total height: 2,450 mm, total length: 2,600 mm, total width: 2,200 mm, color: yellow, Equipment: CE marking, fork extension, lighting, pallet forks, sideshift, COMBILIFT C4000 | TRIPLEX 6000 MM | FORK POSITIONER | FREE LIFT | FULL CAB | READY TO WORK FULLY SERVICED | WARRANTY | DELIVERY ACROSS EUROPE AND WORLDWIDE 🌍 If you are looking for a forklift that generates value from day one, rather than creating unexpected maintenance costs, this offer is the right choice. We are offering a reliable and fully prepared Combilift C4000 multidirectional sideloading forklift. The machine has undergone a complete technical inspection, detailed testing, and is ready for immediate use in production facilities, warehouses, and logistics operations. KEY ADVANTAGES Fully serviced before sale 🔧 Start-up warranty included 🛡️ Brand new super elastic tires 🆕 Very good technical and visual condition ✔️ Ready to work with no additional investment required 💼 Possibility of a live online presentation 🎥 Delivery available directly to your facility 🚛 TECHNICAL SPECIFICATIONS Manufacturer: Combilift Model: C4000 Year of manufacture: 2015 Capacity: 4000 kg Engine: Diesel Operating hours: 4349 h Mast: Triplex Lifting height: 6000 mm Fork positioner: 1320 mm Forks: 1200 mm Cabin: Full, enclosed, heated Own weight: 6500 kg Free lift: 1920 mm DIMENSIONS Height: 2450 mm Length: 2600 mm Width: 2200 mm Overall height: 2750 mm TIRES Front: 200 50 10 Rear: 27 x 10 12 Tire condition: 100 percent new 🆕 EQUIPMENT Fork positioner Full, heated cabin Free lift Working lights 💡 IDEAL FOR Timber industry 🌲 Steel service centers 🏗️ Steel construction manufacturers Handling pipes, profiles, and long materials Indoor and outdoor operations WHY FT LOGISTICS By choosing FT Logistics, you are working with a company specializing in forklifts, sideloaders, multidirectional trucks, and warehouse equipment. Every machine is inspected, serviced, and tested before delivery. We have over 100 machines available and deliver equipment across Europe, South America, Africa, Asia, and the Middle East 🌍 WE PROVIDE Full service before sale 🔧 Warranty 🛡️ Professional technical support Codpfx Afoz D H Ukogehc Leasing and financing 💶 Transport organization 🚛 Export handling and customs documentation 📄 After-sales support 🤝 Hundreds of customers across Europe trust our machines and return for repeat purchases. We can arrange a live online presentation, send additional photos and videos, and prepare a customized transport offer to your location. FT LOGISTICS We deliver machines ready to work 💪

Condition: excellent (used), functionality: fully functional, Year of construction: 2008, operating hours: 5,519 h, load capacity: 5,000 kg, lifting height: 5,500 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,700 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 3,350 mm, fork length: 1,150 mm, fork width: 200 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23 X 10 - 12, rear tire type: cushion tires (black), rear tire size: 28 X 12,5 - 15, overall weight: 12,500 kg, empty load weight: 7,500 kg, total height: 2,550 mm, total length: 2,500 mm, total width: 2,780 mm, color: red, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, all wheel drive, cabin, fork extension, front guard, head guard, hydraulic fork positioner, lighting, pallet forks, 🔥 COMBILIFT C5000XL | DUPLEX 5500 MM | WIDE FORK POSITIONER 3350 MM | FULL CABIN | READY TO WORK 🔥 🔧 FULLY SERVICED MACHINE | 🛡️ WARRANTY | 🚛 TRANSPORT THROUGHOUT EUROPE AND WORLDWIDE Chsdpfxoz D Ible Afgoc If you are looking for a forklift that will start generating revenue from day one instead of incurring service costs, this machine is ready for you. We offer a proven and professionally prepared COMBILIFT C5000XL sideloader. The machine has undergone a complete technical inspection, full service, and thorough testing. It is ready for immediate operation in a production facility, warehouse, or logistics center. ⭐ KEY ADVANTAGES ✔ Full service completed prior to sale ✔ Start-up warranty ✔ Brand new super elastic tires ✔ Excellent technical and visual condition ✔ Ready for operation without additional investment ✔ Live online presentation available ✔ Direct delivery to your company available 📋 TECHNICAL DATA 🏭 Manufacturer: COMBILIFT 🔹 Model: C5000XL 📅 Year: 2008 🏋️ Lifting capacity: 5000 kg ⛽ Engine: DIESEL ⏱️ Operating hours: 5519 h ⬆️ Mast: DUPLEX 📏 Lifting height: 5500 mm ↔️ Wide fork positioner: 3350 mm 🔱 Fork length: 1150 mm 🚪 Cabin: Full and heated ⚖️ Operating weight: 7500 kg 📐 DIMENSIONS Height: 2550 mm with air conditioning Length: 2500 mm Width: 2780 mm Overall construction height: 3700 mm 🛞 TIRES Front: 23 x 10 - 23 SE super elastic Rear: 28 x 12.5 - 15 SE super elastic Condition: 100 percent NEW ⚙️ EQUIPMENT ✔ Wide fork positioner ✔ Full heated cabin ✔ Working lights ✔ Warning beacon ✔ Windshield wipers ✔ Opening windows ✔ Third and fourth hydraulic valve ✔ CE certificate ✔ Operating manual 🏗️ IDEAL FOR 🪵 Timber industry 🏭 Steel mills and steel stockholders 🔩 Steel construction manufacturers 🔧 Handling pipes, profiles, and long materials 🏢 Indoor and outdoor operation 💼 WHY FT LOGISTICS FT LOGISTICS specializes in forklifts, sideloaders, multidirectional forklifts, and professional warehouse equipment. Each machine undergoes a technical inspection, complete service, and comprehensive testing before delivery to the customer. 🌍 We have more than 100 machines available in stock and deliver equipment throughout Europe, South America, Africa, Asia, and the Middle East. 🤝 WE PROVIDE ✔ Full service before sale ✔ Warranty ✔ Professional technical advice ✔ Leasing and financing ✔ International transport ✔ Export services and customs documentation ✔ After-sales support Hundreds of customers throughout Europe have trusted our machines and return to us for further purchases. 📹 Live online machine presentation available 📸 Additional photos and videos on request 🚛 Individual worldwide transport quotation available FT LOGISTICS 🚀 WE DELIVER MACHINES READY TO WORK.

Condition: excellent (used), functionality: fully functional, STROMAB CT800 Beam Cutting Centre Beam cutting centre for large cross-sections, making it an optimal solution for woodworking and timber frame construction. With electronically controlled 5-axis technology, it meets all requirements for straight, inclined, and compound cutting. It guarantees maximum processing speed and finished product quality, reducing labour input and maximizing productivity. Specification: Electronic adjustment of blade tilt angle 90 - 45 degrees Maximum cutting width 650 mm Electronic saw height adjustment Automatic material feeding Touchscreen control panel Csdpfxjytnfto Afgohc Rotary worktable 0-345 degrees Maximum blade diameter 800 mm

Condition: used, functionality: fully functional, machine/vehicle number: 105000002, Year of construction: 2001, operating hours: 2,600 h, load capacity: 5,000 kg, lifting height: 5,000 mm, fuel type: diesel, mast type: simplex, construction height: 3,400 mm, fork length: 1,600 mm, empty load weight: 8,800 kg, total length: 5,500 mm, drive type: Diesel, construction width: 2,200 mm, Sideload forklift Chassis number: 105000002 Chsdpfxsy Ety Uj Afgsc ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Normal Description: Steinbock 557 side loader, year of manufacture 2001, only 2,600 operating hours. Robust and reliable piece of equipment, ideally suited for use in industrial environments, warehouses, and timber handling. Its solid construction, straightforward technology, and high load capacity make this side loader a long-lasting asset for everyday operations. Used condition with age-related wear, technically ready for use. Export price: €7,400.00 Inspection and test run available by appointment. Errors and prior sale excepted.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5 kg, maximum load weight: 29 kg, overall weight: 35 kg, axle configuration: 3 axles, total length: 13,990 mm, total width: 2,550 mm, tire size: 385 / 65 r 22,5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further information Chassis, semi-trailer, forwarding company Steel welded construction in reinforced design, only 2 longitudinal beams as double T-beams with steel/diamond plate between the longitudinal beams, kingpin plate with 2 interchangeable kingpins. Mudguard for taillights. 1 steel storage box, recessed between longitudinal beams 8 pairs of lashing eyes screwed or welded to the frame, as per manufacturer's choice 24 tons, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation 2 support wedges with holder Aluminum side underrun protection Galvanized steel rear underrun protection Semi-shell mudguards with anti-splash flaps according to EG 1 spare wheel holder for 1 spare wheel, with wheel fastening kit 8 pieces of timber rack brackets, as per manufacturer's choice, screwed to the frame with 2 extendable timber racks each, from 1800 to 2800 mm, 7 tons per pair Axles + Suspension SAF disc brake axles with 430 mm disc diameter Air suspension with lifting and lowering valve, safety cable on the axles 1st axle automatic lift axle, including forced lowering and starting assist, activated by 3x braking (starting assist is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Offset axle spacing mm (combined transport) up to 44 tons total weight Wheels and tires 385 / 65 R 22.5 as per manufacturer's choice Steel rims, factory silver Braking system 2-line pneumatic braking system Cedpfx Afji Rivwjgjhc Spring-loaded parking brake Axle load detection via EBS-Canbus signal, for display on the screen in the driver's cab, the truck must be correspondingly pre-equipped, no truck installation (no calibrated scale) 2 non-interchangeable coupling heads at the front, without connection cable EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of ABS! Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connection cable Front panel/corner posts at the front Steel/lattice front panel, approx. 2,300 mm high, screwed to the frame Approval / Signs Country of approval: Germany Type approval according to EG 2007/46 prepared for single-row license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Paint Frame DB 7350 Novagrau Support feet black coated Front panel hot-dip galvanized Note: Archive images! Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,800 kg, maximum load weight: 27,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,810 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,020 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, color: original, Year of construction: 2026, Customized transport solution Configure your Fliegl trailer according to your requirements. The vehicle shown is an example only. Production and equipment are customized according to customer specifications. # Chassis Heavy-duty HANGLER welded construction made of high-quality steel with tapered welded main beams and reinforced neck section with double centre web. Punched Z-profile cross members with welded side frame. Replaceable 2" kingpin with chamfered skid plate. 18 pairs of recessed lashing rings (2.5 t each) and 8 pairs of recessed folding lashing rings (5 t each). 24 t two-speed landing gear, one-side operation. 2 wheel chocks with holders. Aluminium side underrun protection. Plastic mudguards in front of and behind each axle with anti-spray mud flaps. Rear underrun protection and full-width rear mud flap. Approx. 8,000 mm covered coil well divided by approx. 40 mm inclined loading beams. Stake pockets and supports for FR 80/80/4 stakes, fully hot-dip galvanized. 80/80 plug-in stakes with reinforced lower section. Hydraulic inclined loading system with 4 cross beams. Hydraulic supply via tractor through a 2-line hydraulic system (pressure/return) with double Faster couplings. Inclined loading beams with integrated height-adjustable telescopic extensions. Multi-stage hydraulic cylinders with universal joints. Adjustable supports with locking pins. Cylinder openings protected by strip brushes against dirt and weather. 5-function control valve for inclined loading system and folding mechanism. Sliding roof system with tarpaulin apron cover. 1 tank-end support set with height-adjustable support pins for different tank diameters, including storage bracket. Front impact stop for inclined loading platform. # Axles + Suspension Disc brake axles Offset axle spacing 1,310 / 1,450 mm Air suspension # Brake system Dual-line compressed air braking system Aluminium air tanks Spring parking brake Axle load detection via EBS CAN bus Tyre Pressure Monitoring System (TPMS) according to ECE R141 with display in the towing vehicle via EBS # Wheels and tyres 435/50 R19.5 tyres # Electrical system 24 V electrical system Chjdpfxsi Riw Hs Afgoc Multi-chamber lighting Yellow LED side marker lights Flashing LED side marker lights synchronized with turn indicators 2 × 7-pin and 1 × 15-pin front sockets Additional 7-pin rear socket (ISO 1724) integrated into the underrun protection Double LED illuminated warning panels, extendable to 3,000 mm, removable with plug connection LED rotating beacon with holder, switched via parking lights # Floor Approx. 30 mm phenolic plywood floor, flush-mounted with the side frame # Front wall Fixed aluminium hollow-profile front wall, approx. 2,400 mm high, with timber slats above. Interior reinforced with 3 mm aluminium wear plate up to approx. 630 mm from floor level. # Posts 2 fixed front volume corner posts, approx. 2,400 mm high 3 pairs of Kinnegrip centre posts, approx. 600 mm high, with Kinnetop extension to approx. 2,000 mm 1 pair of removable and foldable rear corner posts made of aluminium hollow profiles, approx. 600 mm high, reinforced internally up to the first slat row Integrated curtain bow recess with two rows of curtain bows. # Roof EDSCHA Profi 95 sliding roof system with straight roof frame and steel scissor mechanism for full curtainsider tarpaulin. Mechanically adjustable roof.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,900 kg, maximum load weight: 26,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,200 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 13,300 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, low-bed semi-trailer Steel welded construction, kingpin plate with 2 replaceable kingpins and 2 kingpin positions, Cedpfx Aji Ri E Rofgehc 24 tons, 2-speed landing gear, single-sided operation, with straight lower section, without thrust compensation Rear support, foldable 2 wheel chocks with holder Aluminum side impact protection Mud flaps at the rear, covering the entire width Fenders in front of the 1st axle and at the rear of each axle with anti-spray, according to EC Extendable widening elements to 3,000 mm (not in rear slope) Storage compartment for timber planks in the center of the loading area Timber planks 70 mm for widening to 3,000 mm Tie-down points, low-bed 2 pairs of ring tie-down points, each 5 tons, at the front on the gooseneck 11 pairs of tie-down mushroom heads, recessed at the top and side in the outer frame, each 10 tons 2 x on the gooseneck 9 x distributed in the low-bed area First tie-down point 250 mm from the front and last max. 250 mm from the rear, distance between tie-down points not greater than 1100 mm 8 pairs of beam pockets recessed in the outer frame, inner dimensions 70 x 40 mm (can be converted to 5 ton ring tie-down points) Axles + Suspension SAF drum brake axles Air suspension Wheels and tires 235 / 75 R 17.5 Steel rims in twin arrangement, factory silver Braking system 2-line compressed air brake system Color-coded line routing for easy service. Spring parking brake EBS, electronic brake system with EBS socket at the front, without connection cable 2 fail-safe coupling heads at the front, without connection cable with lift and lower valve Axle load recognition via EBS-CAN bus signal, for display on the instrument panel in the cab Vehicle - driving stability system Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red outline marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connection cable 1 LED rotating beacon with holder 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Gooseneck with steel sheet covering Storage box recessed in the ramp to the gooseneck followed by 70 mm softwood floor, in the wheel arch area steel/diamond plate covering Rear slope with 70 mm softwood floor Low-bed area including rear slope 9,200 mm Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable covered with wood Hydraulically operated via tractor's auxiliary drive with throttle, operation on the left side Hydraulic connection with SVK socket NW 10/3, without connecting hoses Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,600 kg, maximum load weight: 24,400 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 5,900 mm, loading space width: 2,520 mm, loading space height: 860 mm, total length: 10,290 mm, total width: 2,550 mm, total height: 860 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, color: original, Year of construction: 2026, Tailor-made transport solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and specification are customised to customer requirements. #Low Loader Drawbar Trailer Chassis Welded steel construction Turntable with heavy-duty ball race Folding rear support legs 2 wheel chocks with holders Half-shell mudguards on 1st axle Quarter mudguards behind 2nd and 3rd axles Side underrun protection Yellow side LED lights instead of reflectors Full-width rear mudflap (not in combination with forklift mounting) 1 lockable plastic toolbox, W 600/H 425/D 460 mm #Lashing Points Low Loader 1 pair of recessed 10 t lashing cut-outs in front gooseneck side members 7 pairs of recessed 10 t lashing points in top and side outer frame 1 on front gooseneck 5 in low bed 1 in rear bevel 12 pairs of 5 t lashing holes in outer frame (for load straps) 5 on gooseneck, 6 in low bed and 1 in rear bevel #Drawbar Equipment Drawbar with certified 40 mm towing eye Spring-assisted drawbar height adjustment #Axles + Suspension Drum brake axles, manufacturer's choice "Achsen-/Fahrwerk laservermessen" reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushes and mechanical axle load equaliser #Wheels and Tyres 235/75 R17.5 Manufacturer's choice Twin steel wheels, factory silver #Braking System Twin-line air brake system Spring parking brake Cedpeznw U Eofx Afgehc 2 non-interchangeable front coupling heads with connecting lines to towing vehicle Connecting lines extended by approx. 60 cm Without ABS, with mechanical ALB, max. 60 km/h approval #Electrical System 12 V multi-chamber lights with yellow side LED lights Flashing side LED lights linked to indicators 2 front white position lights 2 rear white/red outline marker lights 1 x 7-pin 12 V front plug with connecting cable, extended by approx. 60 cm 1 removable LED beacon with bracket, switched via side lights 2 pairs of illuminated warning boards, extendable to 3,000 mm #Floor Front gooseneck with steel chequer plate Recessed storage box in transition to gooseneck Approx. 70 mm softwood floor, steel chequer plate in wheel arch area Rear bevel with 70 mm softwood floor Low loader deck incl. rear bevel: 5,900 mm #Loading Ramps Steel ramps, 3,000 mm long, 750 mm wide, laterally adjustable Timber-covered (steel chequer plate at ramp tips) Hydraulic operation via PTO with flow control, left-hand side operation in direction of travel Hydraulic connection with SVK plug NW 10/3 incl. connecting hose #Paint Finish Chassis painted DB 7350 Nova Grey "10 Jahre Gewährleistung gegen Durchrostung" Drawbar galvanised or black, manufacturer's choice Loading ramps hot-dip galvanised

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 2,048 h, load capacity: 6,000 kg, lifting height: 5,500 mm, free lift: 1,650 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 2,800 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,360 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23 X 10 - 12, rear tire type: cushion tires (black), rear tire size: 28 X 12,5 - 15, overall weight: 13,800 kg, empty load weight: 7,800 kg, total height: 2,600 mm, total length: 2,650 mm, total width: 2,400 mm, color: green, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, all wheel drive, cabin, fork extension, hydraulic fork positioner, lighting, pallet forks, # 🚜 COMBILIFT C6000XL | DIESEL | TRIPLEX 5500 MM | FREE LIFT | FORK POSITIONER | FULL CAB | READY TO WORK ✅ FULLY SERVICED | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY Looking for a powerful multidirectional forklift for handling long, heavy, and demanding loads? This 2016 COMBILIFT C6000XL is an excellent solution for timber, steel, manufacturing, and industrial applications. The machine has been fully inspected, serviced, and prepared for immediate operation. ## ⭐ KEY ADVANTAGES ✅ 6000 kg load capacity ✅ Triplex mast – 5500 mm ✅ Full free lift – 1650 mm ✅ Hydraulic fork positioner ✅ Full heated cab ✅ KUBOTA V2403-T diesel engine ✅ Only 2098 operating hours ✅ Super Elastic tires – approx. 100% ✅ Fully serviced and technically inspected ✅ Ready to work immediately ## 🔧 TECHNICAL SPECIFICATIONS Manufacturer: COMBILIFT Model: C6000XL Stock No.: W374 Year: 07/2016 Serial No.: 31818 Capacity: 6000 kg Service Weight: 7800 kg Engine: KUBOTA V2403-T Power: 44 kW Fuel: Diesel Operating Hours: 2098 h Mast: Triplex Lift Height: 5500 mm Free Lift: 1650 mm Fork Positioner: Hydraulic Fork Positioner Width: 1360 mm Sideshift: No Forks: 1200 mm Fork Section: 150 × 50 mm Cab: Full / heated Platform: 1200 mm ## 📐 DIMENSIONS Overall Height: 2600 mm Construction / Lowered Mast Height: 2800 mm Overall Length: 2650 mm Overall Width: 2400 mm ## 🛞 TIRES Front: Super Elastic 23 × 10-12 – approx. 100% Rear: Super Elastic 28 × 12.5-15 – approx. 100% ## 🏗️ EQUIPMENT 🔹 Triplex mast 🔹 Full free lift 🔹 Hydraulic fork positioner 🔹 Full heated operator cab 🔹 Working lights 🔹 Fan 🔹 Industrial Super Elastic tires 🔹 1200 mm forks 🔹 1200 mm loading platform Chodpfsz E R R Esx Afgec ## 🎯 IDEAL FOR 🌲 Timber and wood industry 🏭 Steel mills and service centers 🔩 Pipes, profiles, beams, and panels 📦 Long-load handling 🏗️ Structural steel manufacturers 🏭 Manufacturing facilities 🌦️ Indoor and outdoor operations ## 🤝 WHY FT LOGISTICS? FT LOGISTICS specializes in forklifts, sideloaders, multidirectional forklifts, and warehouse equipment. Every used machine undergoes a comprehensive technical inspection, full service, and operational testing before delivery. We provide: ✅ Pre-delivery service ✅ Technical inspection and testing ✅ Warranty ✅ Professional technical support ✅ Leasing and financing ✅ Worldwide transport ✅ Export and customs documentation ✅ After-sales support 🎥 Live online demonstration available 📸 Additional photos and videos on request 🚛 Custom transport quotation directly to your facility FT LOGISTICS 🚀 We deliver machines that are ready to work.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 3,415 h, load capacity: 3,000 kg, lifting height: 4,900 mm, free lift: 1,380 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 2,250 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,400 mm, fork length: 1,500 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16X7X10 1/2, rear tire type: cushion tires (black), rear tire size: 23X10X16, overall weight: 9,555 kg, empty load weight: 6,555 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: green, Equipment: CE marking, all wheel drive, front guard, head guard, lighting, pallet forks, sideshift, 🚜 COMBILIFT CB3000 – 2017 | DIESEL | TRIPLEX 4,900 mm | FORK SIDESHIFT | FORK POSITIONER | FREE LIFT ✅ Ready to Work from Day One – No Additional Investment Required Looking for a reliable forklift that keeps your operation running without unexpected downtime? This COMBILIFT CB3000 has been fully serviced, thoroughly inspected, and professionally prepared for immediate operation. Simply put it to work and focus on your business. ✔ Major service completed (oils, filters, and full component inspection) ✔ Excellent mechanical and cosmetic condition ✔ Only 3,415 operating hours – genuinely low usage ✔ Brand-new tires fitted ✔ No hidden costs or immediate repair requirements 🔧 Key Specifications Capacity: 3,000 kg Engine: Kubota Diesel Mast Type: Triplex Lift Height: 4,900 mm Free Lift: 1,380 mm Fork Positioner: 1,400 mm Fork Length: 1,500 mm Open Operator Cabin with Overhead Guard 📋 Technical Specifications General Information Manufacturer: Combilift Model: CB3000 Year of Manufacture: 2017 Operating Hours: 3,415 h Load Capacity: 3,000 kg Load Center: 600 mm Truck Weight: 6,555 kg Mast & Lifting Triplex Mast Maximum Lift Height: 4,900 mm Free Lift: 1,380 mm Forks & Attachments Fork Positioner: 1,400 mm Fork Length: 1,500 mm Fork Sideshift Dimensions Overall Height: 2,250 mm Overall Length: 1,550 mm Overall Width: 1,500 mm Construction Height: 2,250 mm Tires Super Elastic Tires (100% New) Front: 17x7x10½ Rear: 23x10x16 Equipment ✔ Open Cabin with Overhead Guard ✔ Fork Sideshift ✔ Fork Positioner ✔ Free Lift Chedpfxez Hp U So Afgsc ⭐ Condition Mechanical Condition ✅ Fully serviced and workshop inspected Cosmetic Condition ✅ Professionally refurbished ✅ Corrosion-free ✅ Near-new appearance 🎯 Ideal Applications ✔ Narrow aisle warehouses ✔ Timber industry ✔ Steel and metal processing facilities ✔ Pipe and long-load handling ✔ Indoor and outdoor operations 💼 What You Are Buying This is not just a used forklift. You are investing in a machine that has been professionally prepared, tested, and made ready for immediate operation. ✔ Comprehensive pre-sale inspection and testing ✔ Ready for immediate deployment ✔ Live online demonstration available ✔ Delivery directly to your facility available 🚛 Delivery & Customer Support ✔ Transport available throughout Europe ✔ Complete logistics support ✔ Leasing and financing assistance ✔ Professional after-sales support 🏆 Why Choose FT LOGISTICS? We supply forklifts that work — not machines that spend their time in the workshop. ✔ More than 100 machines available ✔ In-house service and refurbishment facilities ✔ Experience serving customers across Europe ✔ Hundreds of satisfied clients 📞 Contact Us Today Whether you need additional specifications, pricing information, or a live video presentation, our team is ready to assist. FT LOGISTICS 🚜 Quality You Can Rely On. 🔧 Service You Can Trust. 🤝 Your Trusted Partner in Material Handling Equipment.

Condition: good (used), Cyklos GPM 450SA Semi-Automatic Creaser Machine in very good condition, ready for production. Description: Working width up to 450 mm. Csdpsz Iczujfx Afgjhc Programmer with the ability to save up to 15 creasing/perforation positions. Sheet is fed manually and then automatically retrieved. Easy-to-use control panel with program storage. Sturdy metal construction. Creasing or perforation across the width of the sheet (creasing tool included). Creasing of digital prints and laminated sheets is possible. 4 different creasing widths are standard. Large work table.

Condition: new, overall weight: 48,000 kg, axle configuration: 3 axles, suspension: air, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Heavy-duty design, air suspension with lift axle, axle load gauge for axle load monitoring, upper deck length approx. 4,400 mm including slope, lower deck length approx. 8,500 mm, loading height approx. 900 mm, suitable for 2-axle and 3-axle semi-trailer tractors, adjustable kingpin, front wall, 16 x lashing point pockets in the outer frame, 32 x lashing points, ramp approx. 4,200 mm long (2-part), ramps with climbing strips on the outside, ramps for driving over on the gooseneck, further options available at an extra cost, last axle as a steering axle, warning signs + lighting and rotating beacon, widening to 3 m with timber, hydraulic adjustment of the ramps, -- subject to printing errors, mistakes and changes, sample images --, more data available at: !, More Details: ! Codpfx Aez H T Rwofgehc

Condition: new, functionality: fully functional, Year of construction: 2026, Villex Plus Giant Block-Line Black 1.0 – The impressive 10 x 3 meter XXL office container with a panoramic glass front! Are you looking for a representative, extremely spacious, and modern open-plan solution? The Villex Plus Giant Block-Line Black 1.0 from Villex Container GmbH sets new standards in design and spatial experience. Chsdpfoz Ia Tbjx Afgjc With its impressive dimensions of 10.0 m in length and 3.0 m in width, it offers approximately 30 m² of usable space in the exclusive BLOCK-LINE design. The elegant color scheme in anthracite (RAL 7016), the double-glazed glass door, and no less than five floor-to-ceiling panoramic windows (each 1,000 x 2,000 mm) create an incomparably bright, stylish, and light-filled room atmosphere. Perfect as an open-plan office, showroom, salesroom, practice, or representative reception area. Inspection and collection are possible at any time by arrangement. 🔹 HIGHLIGHTS & DATA AT A GLANCE Model: Villex Plus Giant Block-Line Black 1.0 Manufacturer: Villex Container GmbH Condition: New & ready for immediate use External dimensions: 10.00 m x 3.00 m x 2.60 m (L x W x H) Usable area: approx. 30.0 m² (generously sized and flexibly divisible) Weight: approx. 2,200 kg (solid & extremely stable) Color concept: Completely in modern anthracite (RAL 7016) with an elegant BLOCK-LINE look Construction: Robust steel construction – durable, safe & stable Insulation: 50 mm thick insulation for a pleasant indoor climate in all seasons 🔹 PANORAMIC FEATURES & ELECTRICAL EQUIPMENT Entrance: Double-glazed glass entrance door for a high-quality appearance Window front: 5x floor-to-ceiling windows (each 1,000 x 2,000 mm) for maximum light penetration Electrical equipment (complete package): External connection: 32A CEE plug, red (power supply) 3x double sockets for workstations & hardware 2x LED lights for perfect illumination 1x light switch & fuse 🛠 CUSTOM FABRICATION & SPECIAL REQUESTS POSSIBLE Do you need partition walls, sanitary facilities, an air conditioning system, or additional electrical connections? We will adapt the container precisely to your requirements! 🚚 DELIVERY & PAYMENT Delivery: Fast, nationwide delivery with our own special vehicles / crane truck Delivery time: In-stock standard models: approx. 1–2 weeks Individual special production: approx. 4–6 weeks Payment options: PayPal Bank transfer (prepayment) 📞 REQUEST A NON-BINDING QUOTE NOW! Get free advice! Write to us directly via classified ads or call us – we will create your individual offer. (Search terms / Keywords: Villex Plus Giant Block-Line Black 1.0, office container 10x3m, XXL container 30m2, modular office, Block-Line container, floor-to-ceiling windows, panoramic container, open-plan office, showroom container, anthracite RAL 7016, modular construction, commercial container, practice container)

Condition: like new (used), functionality: fully functional, We offer new, IICL 20DV sea containers available from Koper. CONTAINER TYPE: 20DV sea container DELIVERY CONDITION: new, IICL certified, wind and watertight, cargo worthy, with CSC plate, wooden floor, original photos DIMENSIONS L x W x H: According to ISO standard External dimensions: 6,058 x 2,438 x 2,591 mm, Internal dimensions: 5,898 x 2,352 x 2,390 mm, Door dimensions: 2,338 x 2,280 mm, Volume: 33.1 m³, Weight: 2,400 kg Csdpfxsz Imv Aj Afgehc TRANSPORT: Please provide your postal code so that we can prepare a free and non-binding offer for the container, including delivery and, if necessary, unloading from the truck. VARIETY: In addition, you will find sea containers of all common sizes (20DV, 40DV, 20HC, 40HC, etc.) for every need. Whether for storage, construction projects, logistics solutions, or sea transport. We look forward to hearing from you! NAUTEXA GmbH

Condition: used, functionality: fully functional, Equipment: bathroom, lighting, shower, 20FT SANITARY CONTAINER for sale, available from Meppen ✅ CONTAINER TYPE: Sanitary container ✅ DELIVERY CONDITION: Used, watertight, intact 2 toilet units including toilet paper holders 2 urinal units with flush valves 5 hand wash basins 1 shower unit with curtain 1 water heater Chedpfx Afsz Imwgegjc The container is sold in used condition and may have defects, dirt, color variations, rust, etc. ✅ DIMENSIONS L x W x H: 6058 x 2438 x 2800, internal height 2500 mm. ✅ TRANSPORT: Please provide your postal code so that we can prepare a free and non-binding offer for the container including delivery and, if necessary, unloading from the truck. ✅ VARIETY: In addition, you will find a wide range of shipping containers in all common sizes (20DV, 40DV, 20HC, 40HC...) and for every need. Whether for storage, construction projects, logistical solutions, or sea transport. We look forward to hearing from you! NAUTEXA GmbH

Condition: used, overall weight: 7,000 kg, Equipment: lighting, A used workshop container is offered for sale, located in Korbach, Germany. CONTAINER TYPE: Workshop container, office container Dimensions: 5 x 4.25 x 4.15 m Weight: 7000 kg DELIVERY CONDITION: Used, functional EQUIPMENT: - Exterior lighting - Heating - Fire extinguisher - Ramp - Roller shutter door, electric - Electrical system, 65 amps - High-voltage connection DIMENSIONS L x W x H: approx. 5 x 4.05 x 4.20 m, weight: 7,000 kg Chsdpfxsz Imwyo Afgjc DELIVERY: Approx. 2 weeks lead time TRANSPORT: Please provide your postal code so that we can prepare a free, no-obligation offer for the container, including delivery, and unloading from the truck if necessary. VARIETY: We also offer sea containers in all common sizes (20DV, 40DV, 20HC, 40HC...) and for every need. Whether for storage, construction projects, logistical solutions, or sea transport. We look forward to hearing from you! NAUTEXA GmbH

Condition: used, USED 20DV OFFICE CONTAINERS FROM ESSEN – AVAILABLE IMMEDIATELY! ✅ Container type: Office container 20DV ✅ Condition: Used, wind and watertight, without equipment, original photos ✅ Features: Electrical installation & heating, entrance door on the short side ✅ Dimensions (LxWxH): 6,058 x 2,438 x 2,800 mm – clear internal height 2,500 mm ✅ Price is net ✅ Transport: Free & non-binding delivery offer (including unloading if required) – simply provide your postal code ✅ Variety: In addition to office containers, we also supply shipping containers in all standard sizes (20DV, 40DV, 20HC, 40HC, etc.) for storage, construction projects, logistics solutions, or sea transport Contact us now – we are happy to advise you! Chjdpoz Imwmjfx Afgec NAUTEXA GmbH – Your container partner

Condition: good (used), Year of construction: 2001, operating hours: 8,583 h, Komatsu WA75-3 wheel loader – well-maintained condition For sale is a Komatsu WA75-3 wheel loader, manufactured in 2001, in well-maintained and operational condition. Technical specifications: * Manufacturer / Type: Komatsu WA75-3 * Year of manufacture: 2001 * Operating hours: 8,583 h * Engine: Yanmar * Engine power: 42.5 kW * Permissible total weight: 5,300 kg * Tires: 405/70 R18 * Tire tread: good * Attachments: bucket and pallet fork Condition & Features: * New battery * Machine is completely dry, no noticeable leaks * Minimal play in the joints * Well-maintained overall condition * Tires with good tread * Ready for immediate use The wheel loader is ideal for construction, agriculture, farm work, and various applications. Codoz Ilggjpfx Afgehc Inspection possible by appointment. Private sale, no VAT applicable.

Year of construction: 2001, condition: used, filling capacity 40 l Suction height 3000 mm wall strength VA 3,0 mm total power requirement 6/12 kW/A weight of the machine ca. 0,5 t Chedpfxez D Ir Rs Afgjc dimensions 1,63 x 0,68 x 1,24 m Used centrifuge for coolants and washing media. - VA welded construction - Power connection V/A 400/16

Condition: used, lifting height: 3,410 mm, Year of construction: 2019, operating hours: 2,910 h, Empty weight: 3.500 kg Dimensions (LxBxH): 465 x 170 x 252 cm Digging depth: 4.88 m = Additional options and accessories = Chjdpfx Afsyn En Ujgoc - Rubber tracks

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, overall weight: 6,700 kg, MAZAK FJV-250 CNC Vertical Machining Center For sale is a robust and powerful Mazak FJV-250 with a double-column/gantry design. Technical specifications: Manufacturer: MAZAK Model: FJV-250 Year of manufacture: 2001 Control: Mazatrol PC Fusion 640 M Travel ranges: X-axis: 1,020 mm Y-axis: 510 mm Z-axis: 460 mm Codpfx Aoz Ihxljfgjhc Table size: approx. 1,200 × 550 mm Max. spindle speed: 12,000 rpm Tool holder: SK40 / ISO40 3-axis CNC machining center The FJV-250 is designed for precise and demanding milling operations thanks to its stable double-column construction. The generous work area allows for the machining of larger and heavier workpieces. The Mazatrol PC Fusion 640 M control system enables both comfortable Mazatrol dialog programming and the processing of CNC programs. The machine can be inspected and demonstrated under power by arrangement. Location: 78120 Furtwangen, Germany Subject to prior sale and errors in the technical specifications.

Condition: used, fuel tank capacity: 128 l, Year of construction: 2017, operating hours: 6,980 h, Field of application: Construction Empty weight: 9.000 kg Dimensions (LxBxH): 699 x 220 x 257 cm Track width: 45 cm Digging depth: 4.4 m Unloading height: 5.14 m = Additional options and accessories = - Digger blade - Rubber tracks Csdpfezdud Asx Afgohc

Condition: good (used), Key technical specifications: • Working height: approximately 10.30 meters. • Maximum outreach: 3.30 meters. • Load capacity (platform): 200 kg to 250 kg depending on the configuration/year. • Total machine weight: approximately 3.28 tonnes (3,280 kg). Chodpfxsz Ikv Te Afgjc • Dimensions (L x W x H): 2.81 m x 0.99 m x 1.99 m. • Power supply: 24V / 250 Ah electric traction battery. • Turret rotation: 350 degrees.