Used Tilt Cylinder for sale (11,017)

Condition: good (used), Year of construction: 2013, machine/vehicle number: 136149500092-0273, Offer 24109 Technical data: - 4 storage spaces for 50L. bottles - Continuous bottle holder - exhaust air opening - Cabinet is lockable, key is available Nwedpfxjtwnlhe Af Een - Space requirement W 1400 x D 465 X H 2150 mm - Weight approx. 120 kg

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, tilting cylinders Nodpfx Afjkahk Ij Eown -Manufacturer: Yale, double-acting hydraulic cylinder stroke 250 mm -Type designation: H-20/250 -Piston rod: Ø 42 mm -Lifting capacity: 20 t -Operating pressure: max. 700 bar -Dimensions: Ø 85 x 455 mm -Weight: 14.1 kg

Condition: new, functionality: fully functional, Year of construction: 2023, machine/vehicle number: 12502120, Cylinder heads are no longer used as the CHP unit has been decommissioned! Nodpfexc Dwiox Af Eswn

Condition: ready for operation (used), for bottle size: 10 l Nedpfxjd Hwn As Af Ejwn

Year of construction: 1981, condition: ready for operation (used), diameter 800 mm roll surface width 1800 mm heating system Sattdampf 0 0 860 Liter 0 5 bar max. temperature 168 ° C Nedew Tm Tispfx Af Ejwn range L-W-H 2,2 x 0,8 x 0,8 m 4 pieces in total, drying drums Ø 800 mm, steam-heated, including pedestal bearings, foto no. 4 shows how the drying cylinder works.

Year of construction: 2018, condition: new, machine/vehicle number: 781363111, CAT 3304 Cylinder head * New * Additional Information Nodpfx Afjhyx U Ds Eewn Type: engine, General condition: very good, Technical condition: very good, Visual condition: very good,

Year of construction: 1987, condition: used, machine/vehicle number: 6489; Lg-Nr. 13105, Technical data: - max. load capacity 3000 kg - Face plate cross 1600 x 1600 mm - Cross face extension tubes - face plate cross mot. swivelling 0 - 90 / 135 ° - rotation infinitely variable 0,01 - 4 rpm - right - + left rotation controllable - Welding current transmission approx. 500 A - Drive 400 V Njdjbp Ddzopfx Af Eswn - Table height in horizontal position without underframe approx. 1200 mm - Table height in horizontal position with underframe approx. 2200 mm - Space requirement approx. W 1600 x H 1200 + 1000 x D 2400 mm - Weight approx. 2700 kg

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Manufacturer: Leibfried, pneumatic cylinder double-acting type L 81 .: 43 881 Stroke: 110 mm -Piston rod: Ø 18 mm -Max. pressure: 10 bar -Quantity: 2 pieces available Nwodpfx Afsxay Ulo Ejn -Price: per piece -Dimensions: 267/80/H70 mm -Weight: 2.1 kg/piece

Condition: good (used), Index GE42 Nwedpjfbup Rsfx Af Een Clamping cylinder GG2713.2101 good order

Condition: new, Cylinder, packed in wooden box, cylinder with ceramic heaters for 90mm extruder Nwodpfx Afoua Ti Io Esn grooved feed

Condition: excellent (used), functionality: fully functional, Renishaw Probe head PH10MQ (new style) incl. - Head PH10MQ - Controller PHC10-2 - Handcontrol HCU1 Njdpfjni Au Ujx Af Ejwn - on demand PAA1 probe adapter (or other type) On demand: Probe TP2, 20, 200, TP7 ro SP25 (SP600)

Condition: new, functionality: fully functional, screw diameter: 60 mm, New screw & cylinder Fits the following machine: Negri Bossi VE-370 Nedoufx A Dopfx Af Eswn Size: 60mm Article no: 1014

Year of construction: 1990, condition: used, machine/vehicle number: xxxx; Lg-Nr. 17250, Technical data: -Load capacity 200 kg Nwsdjdd Ilxspfx Af Esn -Throat depth 800 mm -Working height in horizontal position approx. 1000 mm -Mot boom. left + right swivel - arm arm manually Tiltable -Mot face plates. left + right rotatable - faceplate speed infinitely variable - faceplate diameter 300 mm - adjustable control panel with control make ESAB, - type 6 PTF, BJ. 97 - space requirement approx. B 1100 x H 1300 x T 1600 mm -Weight approx. 300 kg

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Manufacturer: Festo, standard cylinder double-acting type DNN-63-25-PPV-A -Stroke: 25 mm -Piston: Ø 63 mm -Piston rod: Ø 20 mm -Hole: Ø 16 mm -Max. pressure: 12 bar Njdpfx Aexay Raof Eown -Quantity: 2 pieces available -Price: per piece -Dimensions: 265/80/H130 mm -Weight: 2.4 kg/piece

Condition: as good as new (ex-display), 20 pcs Cylinder arm machine for leather -1 needle -Thread trimmer -3 transport Nwjdpfjikqpkex Af Eon -220v -Efka motor

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 350 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller length: 3,100 mm, sheet thickness (max.): 20 mm, STANDARD EQUIPMENT * Lower, top and side rolls move up and down linearly via pistons hydraulically attached to the frame * Protected against overload * Top and side rolls are driven by hydromotor and planetary gearbox (3-roll motor driven) * The position of the rolls can be easily read with three digital displays * Rolled parts are easily removed thanks to the hydraulically opening head and automatically lifting shaft * Very easy operation with mobile control panel * Welded steel construction frame * SAE 1050 (CK 50) induction hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620 -680) * Dual speed operation system Njdew Smdfepfx Af Eown OPTIONAL EQUIPMENT * Automation with NC and CNC controls * Top crane (elevator) for large diameter bending support * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) TECHNICAL SPECIFICATIONS Bending Length: 3100 mm Pre-bending: 12/16 mm Bending: 16/20 mm Top & Lower Roll: 350 mm Side Roll: 260 mm Motor Power: 23.5 kW Bending Speed: 1.5 - 5 m/min Length: 5350 mm Width: 1900 mm Height: 1950 mm Weight: 14,450 kg

Condition: like new (used), Renishaw Probe head PH10M (new style) incl. - Head PH10MQ Nwsdsni Avcspfx Af Ejn - Controller PHC10-2 - Handcontrol HCU1 - on demand PAA1 probe adapter (or other type) On demand: Probe TP2, 20, 200, TP7 ro SP25 (SP600)

Condition: good (used), Manufacturer: WMW Machine type: FUW 200/1 WMW Auerbach Machine number: Type / Model: Turn-tilt-swivel table Njdpfx Afeuan Rme Eewn Table top: 540 x 245 mm Clamping surface: 460 x 175 mm Stop surface: 290 x 195 mm Slot width: mm Groove spacing: mm Table cross adjustment: 135 mm Equipment: rotatable, tiltable and swiveling Condition: good Weight: 80 kg Dimensions: 550 x 500 x 300 mm

Condition: good (used), Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp, compact cylinder, short-stroke cylinder -Manufacturer: Joyner, pneumatic cylinder type DUJ-22-60/50 -Stroke: 50 mm -Piston diameter: 60 mm -Piston rod: Ø 16 mm -Hole: Ø 16 mm -Dimensions: 245/80/H105 mm -Weight: 1.9 kg Nodpfsxayxdox Af Ejwn

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,550 mm, sheet thickness (max.): 10 mm, STANDARD EQUIPMENT - Steel construction main frame - Hydraulic top roll opening head - Movable control panel - Motor-driven central rolls - Hydraulic up-down movement for rear and lower rolls - Precision bending with braked main motor - Cone bending and pre-bending system - Lower and upper rolls driven by planetary gearbox - Rear roll ball system facilitating sheet movement - Compliance with EU safety directives Nwjdsw Slcgopfx Af Een - High-strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 units) - User manual OPTIONAL EQUIPMENT - Overhead crane (elevator) for supporting large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Wire grooves at roll ends - NC control unit - Dual speed operation - Infinitely variable speed adjustment - Ejector system - Hydro-motor option TECHNICAL SPECIFICATIONS Bending length: 2550 mm Pre-bending: 6/8 mm Bending: 8/10 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4500 mm Width: 1200 mm Height: 1370 mm Weight: 4800 kg

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder Nedpsxayvcofx Af Eewn -Manufacturer: Knorr-Bremse, pneumatic cylinder type DU-80/100 -Stroke: 100 mm -Piston: Ø 80 mm -Piston rod: Ø 20 mm -Hole: Ø 18 mm -Number: 2x cylinders available -Price: per piece -Dimensions: 315/100/H100 mm -Weight: 4.2 kg/piece

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 3,100 mm, sheet thickness (max.): 9 mm, overall weight: 5,400 kg, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Motor-driven central rolls Hydraulic up/down movement for rear and bottom rolls Precision bending with braked main motor Cone bending and pre-bending system Upper and bottom rolls driven by planetary gearbox Rear roll ball support system for easier sheet movement Compliance with EU safety directives High-strength, forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operator's manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for support in large diameter bending Ground and polished rolls Wire grooves on roll ends Nwjdpfx Afjw Slbve Eon NC control unit Dual-speed operation Infinitely variable speed adjustment Ejector system Hydraulic motor option TECHNICAL DATA Bending Length: 3050 mm Pre-bending: 5/7 mm Bending: 7/9 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 L Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 5400 kg

Condition: good (used), Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder, clamping cylinder -Manufacturer: Festo, standard cylinder double-acting type DNG-32-160-PPV-A -Stroke: 160 mm -Piston: Ø 63 mm -Piston rod: Ø 12 mm -Max. pressure: 12 bar -Quantity: 3 pieces available -Price: per piece Nsdpjw Up Ixjfx Af Eown -Dimensions: 308/50/H50 mm -Weight: 1.0 kg/piece

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Design: Single-acting -Piston diameter: approx. 165 mm -Piston rod: Ø 140 mm -Stroke: 1000 mm -Total length retracted center hole: 1670 mm Nwodpfx Aocv Sivof Eon -Piston rod mount: Ø 80 mm -Cylinder mount: Ø 80 mm -Number: 1x cylinder available -Dimensions: 1850/270/H220 mm -Weight: 318 kg/piece

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, hydraulic buffers, pressure boosting cylinders -Hydraulic cylinder: from press brake EHT type EHP 11-40 -Piston rod: Ø 155 mm -Stroke: 250 mm -Number: 2x cylinders available, 1x left / 1x right -Price per piece Nodpjgxnkcsfx Af Eown -Dimensions .: 855/285/380 mm -Weight: 311 kg / pc.