Used Thermos for sale (684)

Condition: new, functionality: fully functional, Year of construction: 2026, Asphalt Hot Box НВ-2 With Asphalt Hot Box HB-2 by TICAB TM you can deliver hot asphalt from the asphalt plant to the place of road works, with minimal heating loss. Thermal insulation of the container with quality mineral wool allows to keep the working temperature of the asphalt up to 12 hours without additional heating. At the same time, the HB-2 is additionally equipped with a Beckett diesel heating system and a Thermal Controller. HB-2 is equipped with a hydraulic lifting system. There is a manhole on the top of the tank for loading the hot asphalt. Asphalt Hot Box HB-2 by TICAB TM is easily mounted on the truck body or on a trailer. SPECIFICATIONS: - Capacity - 1,8 m3 Iedet It Dvepfx Ahvohw TICAB Manufacturer of road machines: bitumen emulsion sprayers, crack sealing mahines, asphalt recyclers, street vacuum cleaners, universal loaders and other road machines. The highest European quality, competitive prices. If we do not have an official representative office in your country, we are looking for a distributor there! We are looking forward to contact with you!

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 02 2406, GEISS DU 2400 X 2400 T8 YEAR OF MANUFACTURE: 2002 Ijdpfx Ajyin Ugohvehw SERIAL NUMBER: 02 2406 TOTAL POWER CONSUMPTION: 517.9 kW RATED CURRENT: 750 A HEATING POWER INPUT (upper - lower): 462.9 kW RATED VOLTAGE: 230/240 V FREQUENCY: 50 Hz TOTAL WEIGHT: 141.1 kN AIR CONSUMPTION: 3315 liters/cycle AIR CONNECTION: 6 x 10/5 to 8 x 10/5 Pa WATER CONNECTION: min. 1.5 x 10/5 to max. 2.5 x 10/5 Pa A Geiss large-format vacuum thermoforming machine is available. Minimum panel cutting: 1100 mm / 1300 mm, maximum panel cutting: 2100 mm / 1800 mm, maximum forming depth: 620 mm. Additional sheet format 1: min. 850 mm / 750 mm, max. 1850 mm / 1250 mm. Additional sheet format 2: min. 1050 mm / 800 mm, max. 2050 mm / 1300 mm. Includes a separate loading unit with pneumatic panel separation equipment, automatic aligner for longitudinal and crosswise sheet cutting, pneumatic pusher for removing molded parts from the loading table, fully automatic central lubrication system for the loader, and several interchangeable pallets for window panel sets. Documentation available. On-site inspection possible.

Year of construction: 2025, condition: new, Direkt vom Hersteller verkauft, sehr gute qualität, alle komponente aus Europa, Temp. Kontrol Unit (Thermoregulator), Heat Control Device Technische Daten: Marke: Churchill ISI-TAN Model: CH20 Heizleistung: 19 kW (Öl oder Wasser) Kühlen: 90C/50 kW Arbeitsbereich: 0-90C (Wasser), 0-150C (Öl) Pumpe: 60l/min (German brand) Leistungverbrauch: 19 kW Ihedpfegnlpwex Ahvew Voltage: 400/50Hz, 3phases VAT and delivery cost is not included

Year of construction: 2025, condition: new, Direkt vom Hersteller verkauft, sehr gute qualität, alle komponente aus Europa, Temp. Kontrol Unit (Thermoregulator), Heat Control Device Technische Daten: Marke: Churchill ISI-TAN Model: CH18DC- Direkte Kühlung Heizleistung: 9 kW (Öl oder Wasser) Fsmqj7wus Kühlen: 90C/40 kW Arbeitsbereich: 0-90C (Wasser), 0-150C (Öl) Pumpe: 60l/min (German brand) Leistungverbrauch: 10 kW Voltage: 400/50Hz, 3phases VAT and delivery cost is not include Ihedjgp Ny Espfx Ahvew

Year of construction: 2025, condition: new, From manufacturer very good quality heat control unit (Thermoregulator) for sale. Technical data: Brand: Churchill ISI-TAN Model: CH18 Heating Capacity: 9kW (oil or water) Cooling: 90C/40 kW Iedpfx Ahsgnlf Hevjhw Operation Range: 0-90C (water), 0-150C (Oil) Pump: 60l/min (German brand) Power Consumption: 10 kW Voltage: 400/50Hz, 3phases VAT and delivery cost is not included

Condition: good (used), machine/vehicle number: KV, Vertical injection molding machine with 5–2500 ton clamping force Ijdpfx Aoypaqgohvjhw

Year of construction: 2010, condition: good (used), Parts shown by hand not come. Machine is fully functional. Ijdpfjyr N Tvsx Ahvshw

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: DHD/250/100, die cushion stroke: 200 mm, total height: 4,500 mm, table width: 1,200 mm, table length: 1,000 mm, installation height: 900 mm, pressing force: 250 t, total length: 2,000 mm, total width: 2,700 mm, control cabinet height: 1,800 mm, control cabinet length: 800 mm, control cabinet width: 500 mm, die cushion force: 100 t, operating speed: 170 mm/s, reverse speed: 250 mm/s, input voltage: 400 V, stroke length: 600 mm, pressure: 235 bar, electrical fuse: 63 A, ram plate width: 1,200 mm, ram plate length: 1,000 mm, Euroblech 2024 trade fair machine - Hamburg location. Ijdpfx Ahettriajvshw

Condition: excellent (used), 320 USED containers for transporting frozen and refrigerated bread. Iedpfx Aoyq E Nkshvehw We have 3 units available (price: €150/unit). The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN AND UKRAINIAN.

Year of construction: 2007, operating hours: 6,865 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 114744, Multivac R 570 skin-pac machine year of production 2007. Built in vacuum pump Busch + Edwards booster pump foil width 562 mm, Advance 865 mm, Iedpfx Ahjyk Uylevehw 2x moulds No 1. 210 x 160 mm No 2. 255 x 210 mm Very well maintained machine taken out direct from production site.

Condition: excellent (used), Year of construction: 2005, Welcome We offer Ijdpsvyuvuofx Ahvohw Thermoregulator - thermostat for injection molds - model HB THERM 160 U1 - series 4 Technical data: Manufacturer: HB - THERM Type: HB - 160U1 Year of production: 2005 Medium: Water Temperature: 160° C Heater power: 8 kW

Condition: excellent (used), This conveyor belt machine is ideal for shearing the edges of small carpet samples. Ijdpjud Dqkjfx Ahvohw Diagram of K-50 The key component of the KS 50 edge beveling machine is our SE 50 cutting unit. The machine is designed with angle adjustment from 0° to 60°. The depth of cut is adjustable from 2 mm to 22 mm. The guide plate for carpet samples can be easily adjusted steplessly from 20 mm to 210 mm. Quick and easy adjustments can be made by releasing the locking lever. The conveyor belt is driven by a three-phase motor. The speed of the cutting motor and the conveyor belt is infinitely adjustable by means of frequency converters. Larger pieces of carpets are guided manually as they pass through. The cutting width is 50 mm.

Year of construction: 2002, condition: excellent (used), Dryer Arburg Thermolift 200, 200 L, year of manufacture 2002 Isdpfx Ahsymr Rmovshw

Condition: used, functionality: fully functional, Mecapack has developed the O² 2500 tray sealer to provide efficient packaging solutions, particularly for medium to high output production lines. With three available versions, this machine perfectly adapts to the specific requirements of industrial operations. Notably, it features an easily interchangeable built-in tooling system, allowing operators to switch between different packaging processes effortlessly. Additionally, the O² 2500 stands out for its exceptional ergonomics, making it user-friendly, while its design enables thorough cleaning of the entire machine. The FLEX configuration is equipped with an integrated tooling storage rack, ensuring rapid and smooth changes for various tray sizes. Its tooling compatibility with the O² 1500 model further enhances versatility, making this machine suitable for a wide range of production environments. The pneumatic sealing station, equipped with a crank mechanism and mechanical locking, guarantees reliable and precise seals. Integrating the O² 2500 into your production line means benefitting from a robust, ergonomic, and adaptable machine. Moreover, this solution improves overall efficiency while maintaining high-quality standards for food packaging. Benefits: - Fully automatic tray sealer - Superior ergonomics and full cleanability - FLEX configuration with integrated tooling storage - O² 1500 tooling compatibility - Highly reliable and precise pneumatic sealing Technical specifications: Manufacturer: Mecapack Model: O² 2500 MF Ijdpfx Asu Ia Uvshvehw Voltage: 400 V, 3-phase + N + PE Power: 10 kW Cycle rate: 14 cycles/min (cpm) Energy supply: Electricity: 6 to 25 kW; Air: 15 m³ at 6 bar; Water: 100 L/h (can be removed with integrated chiller option) Tray capacity: Depending on format and number of lanes

Year of construction: 1990, condition: ready for operation (used), Two identical thermoforming machines DIXIE-UNION DV 2000 are available. Supply voltage: 380V, frequency: 50Hz, rated current: 20A, version with red CEE three-phase plug (3~). Machine 1 was still in operation until 2025. Machine 2 has not been in use for a longer period and is not complete, as relays were removed for spare parts. An on-site inspection is possible, not under power. Ihodpfx Ajylnz Sohvow

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, Julabo CF30 Cryo-Compact Thermostat, Economy Series The CF30 comes from a very well-known plant manufacturer in Germany. All Julabo units we offer originate from the same highly reputable source and were only in operation for approximately 14 days. They were part of a large-scale system that ultimately was not integrated into regular production, so the devices were used exclusively for test runs. Ihodpfx Aexaz Hvjhvsw Documentation: A comprehensive operating manual with all technical data is available! Technical Data and Specifications: ✅ Manufacturer: Julabo ✅ Model: CF30 Cryo-Compact ✅ Temperature range: –30 °C to +150 °C ✅ Temperature stability: ± 0.03 °C ✅ Heating capacity: 2 kW (230 V) ✅ Cooling capacity (at –20 °C / 0 °C / +20 °C): 0.15 kW / 0.25 kW / 0.32 kW ✅ Refrigerant: R134a ✅ Circulating pump flow rate: approx. 15 l/min ✅ Pump pressure: approx. 0.35 bar (open), max. 5.1 bar (closed) ✅ Bath fill volume: 2–3.5 l ✅ Connection thread: M16×1, with hose adapter Ø 8/12 mm ✅ Dimensions (W×D×H): approx. 24 × 46 × 40 cm ✅ Weight: approx. 35 kg ✅ Interface: RS-232 for external control ✅ Safety class: III (FL) according to DIN 12876-1, IP21 ✅ Special features: LED display with 0.1 °C resolution Splash-proof keypad Early warning system for low fluid level Front drain valve for easy fluid replacement ATC calibration (3-point) Marlotherm heat transfer oil was used in the heating bath.

Condition: used, Year of construction: 2011, We are offering this very rarely used oil tempering unit. It was utilized for research purposes. The unit still contains the thermal oil. The two connection hoses (no guarantee) are also included. Two units are available; please see the second listing. Both are of equal specification. Please send your price offer—and allow some time for a response, as we handle these matters alongside our main activities. The unit must, if not already done, be dismantled and disconnected by your own qualified personnel. Ihedpfsyk Dr Dex Ahvsw All transport-related procedures and requirements are to be carried out at your own expense and risk. The buyer is liable for any (consequential) damages occurring on the premises. Pickup must be completed within 14 days of sale.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 372, total width: 3,750 mm, total length: 10,600 mm, total height: 2,700 mm, power of vacuum pump: 5 W, heating capacity: 100 kW (135.96 HP), compressed air connection: 7 bar, Equipment: documentation/manual, 1 Used WM FC 780E roll fed thermo forming line, with KVH 83 Pre Heater, fully operational, can be seen in production. Currently used for PP & RPET tray forming, typically Food Packaging the machine is used daily and produces great quality products. Therefore it is maintained to V high standard with all WM spare parts, any remaining spares will be included with this line, Toggles, Chains, etc. Price includes Pre Heater for processing PP, Spares & Loading on to your transport. Following a new line now installed Jan 2026, this WM line is available immediately. WM 780E s/n 372 yr. 2008 UNWINDER Max. reel diameter (mm) 1.200 THERMOFORMING MACHINE Max. tool size (mm) 780* x 570 Max. tool size with pneumatic clamp frame (mm) 750 x 570 Max. pos/neg depth (mm) 130/130 Max. sheet width (mm) 810 Max. sheet indexing (mm) 570 Clamping force (daN) 30.000 Upper/Lower heating, installed power (Kw) 50/50 CUTTING PRESS Max. cut dimensions (mm) 760 x 550 Ihsdox Uym Hopfx Ahvsw Platen clamping force (daN) 60.000 Upper/Lower platen stroke (mm) 150/150 steel rule heating plate (Kw) 7,8 VERTICAL STACKER Max. stacking dimensions (mm) 760 x 550 SCRAP WINDER Max. scrap roll diameter (mm) 600

Year of construction: 2012, condition: excellent (used), 1 x Multivac R145 Thermoformer Model: R145 Year: 2012 Ihodpfx Aheykugfsvow Tooling measurements in photos. Located in Northern Ireland

Condition: excellent (used), Mobile plasticiser for press processing of thermoplastics Manufacturer: KMH Type: 60 S Hydraulics PN: 150 bar Pn: 16,5 kW P heating: 8 kW 400 V Single STW 150/1-3-10-K  Temperature control unit  3.9 kVA Isdsg H I Nxepfx Ahvjhw Heating capacity 3 kW 380 V Hydraulic pump Complete factory closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: like new (used), Lovely Multivac R240 thermoformer. Has been packing lamb shanks in pouches for retort cooking. 560 mm wide bed 2 x 3 x 180 mm x 155 mm packs per cycle Ihsdpfx Ajifk I Dehvsw Also possible: 1 x 3 x 380 mm x 160 mm ; 2 x 1 510 mm x 180 mm

Condition: excellent (used), Julabo Model: FP51-SL (v.2) Julabo Circulating Thermostat SL v2 with FP51 Chiller – Heating/Cooling Thermostat Description: For sale is a professional Julabo Circulating Thermostat SL (v2) in combination with the Julabo FP51 Chiller. This device is used for the precise temperature control of liquids and external circuits. It is ideally suited for laboratory, industrial, and test bench applications. The system enables both heating and active cooling, offering stable and accurate temperature regulation. Ihodoygwwfjpfx Ahvsw Technical Data (excerpt): Circulating Thermostat: Julabo SL (v2) Temperature Range: approx. +20 °C to +320 °C Thermostat Power Supply: 230 V / 50–60 Hz Chiller: Julabo FP51 Chiller Power Supply: 400 V / 3NPE / 50 Hz Refrigerant: R507 Protection Class: IP21 Dimensions & Weight: approx. 60 × 70 × 100 cm approx. 120–150 kg Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and error!) For further questions, feel free to contact us by phone.

Condition: used, machine/vehicle number: 4277, Thermomatic-Binder / Thermomatic-Binder PLANAX 380 Serial-No. 4277 Fälzel-Thermobinder Bindelänge / Binding length max. 380mm Blockdicke / max. 60mm Aufheizzeit / Heating up ca. 15min Bindungen / Binding Speed up to 180 Exemplare/h Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect Ihsdpoh Ayc Ujfx Ahvew On Stock Emskirchen / Nürnberg - Can be test

Condition: used, type of input current: three-phase, Thermoforming maschine for plastic materials Ihsdpfx Ajx Aqa Rshvow

Condition: excellent (used), Mathis THN 10988 Laboratory Thermosol System Application This padder-dryer combination has proven itself extremely effective in practice. It is used in this form for a wide variety of hot air treatment processes, such as drying, setting, condensing, thermosolizing, etc. This system is used wherever a certain sample size is required, for example, to produce sample collections or similar. THA Dryer If the padder and dryer are to be used separately in addition to continuous operation, the THA dryer should be selected. This unit is equipped with an unwinder at the dryer inlet and an extractor at its outlet. This element determines the fabric speed when operated separately. This offers the advantage of using the padder and dryer independently and simultaneously. The fabric is then transferred to the dryer for drying, setting, condensing, etc. If all of the above-mentioned applications are to be ensured and if the use of pin frames is also desired for stand-alone operation of the dryer, the THN model is preferable. The standard pin frames are suitable for a sample size of max. 50 x 50 cm (larger pin frames available upon request). Lengthwise adjustable frames for woven fabrics or lengthwise and widthwise adjustable material holders for warp-knitted and knitted fabrics, nonwovens, etc., as well as clamp frames for foils and paper, are available. Drying Chamber The drying chamber, including the electrical equipment box and control panel, are mounted on a base frame and bolted together to form a single unit. Good thermal insulation of the dryer is ensured by its double-walled construction with insulation between them. The nozzle array, with a length of 1300 mm, is divided into an upper and lower nozzle compartment. A control flap allows for equal ventilation from top and bottom, or more air from top or bottom. Fan and Heater Intense air circulation is ensured by a powerful fan with a capacity of approximately 900-3500 m³/h, combined with a well-tuned heating output, resulting in optimal evaporation performance. A dual-protection monitoring system reduces maintenance and increases the operational reliability of the dryer. Ihodpfx Asu D Arishvow The heating capacity is designed for rapid heating and is automatically reduced once the desired temperature is reached to avoid unnecessary power surges. The temperature is controlled by an electronic measuring and control device in the range of 20-250°C. The fresh air is drawn directly into the recirculation fan via a fan. The desired flow rate can be adjusted using a step switch. Technical Specifications Air velocity approx. 4-12 m/sec Air flow approx. 900-3500 m3/h Temperature range up to 250°C Heating output approx. 27 kW Nozzle area 1300 mm Fabric tension continuously adjustable Fresh air supply adjustable to multiple levels Dimensions: LxWxH = 4800 x 1380 x 1750 mm Purchase price: €86,275 Financing through our bank is also possible. komplett-konzept.leasingo.de Other items in other sizes – new and used – can be found in our shop! International shipping costs upon request!