Used Thermoforming for sale (179)

Condition: ready for operation (used), Year of construction: 1990, functionality: fully functional, machine/vehicle number: 1531, operating temperature: 650 °C, plate length: 1,000 mm, plate width: 700 mm, TECHNICAL DETAILS Film width: 700 mm Type of input current: AC Input voltage: 400 V Sheet thickness: 10 mm Sheet dimensions: 1,000 x 700 mm Njdpfx Ajwr Ab Usf Esdc Operating temperature: 650°C Pump capacity: 100 l/min Vacuum pump power: 3,000 W Compressed air connection: 6 bar Form height (min.): 300 mm MACHINE DETAILS Overall width: 700 mm Overall length: 3,500 mm Overall height: 3,500 mm Control cabinet width: 1,000 mm EQUIPMENT - Top heating 3 pilot burners, bottom heating 1 pilot burner - Motorized adjustable height of counterform - Quick clamping of upper and lower frame - Quick tool clamping on the lower table - Quick tool clamping on the upper table - Control of underfilm sag - Bubble formation with electric photocell - Storable bubble and demolding intensity, pneumatic valves in cascade - BUSCH vacuum pump 100 meters/cubic meter

Condition: reconditioned (used), functionality: fully functional, Plate size: 2000 x 1000 mm Forming area: 1960 x 960 mm Ndedswf Ebwjpfx Af Ejc Drawing depth: 600 mm If you would like further details or a quote, please contact us.

Condition: good (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 191, type of input current: three-phase, pressure: 10 bar, total width: 3,050 mm, total length: 2,400 mm, total height: 3,480 mm, control cabinet width: 850 mm, control cabinet height: 1,800 mm, control cabinet length: 600 mm, This machine was overhauled in 2020 and installed at a customer and was not or hardly used. Machine is in excellent condition. Has been professionally disconnected and transported. Ndedpfjwpfrkjx Af Esc

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 202-052, film width: 570 mm, type of input current: three-phase, pressure: 6 bar, total width: 25,800 mm, total length: 82,200 mm, total height: 22,800 mm, Thermoforming machine used,functional for PET,PS,PP. The machine is still in production mode, but is available immediately. Nsdpfxjrh E Ibo Af Eedc

Condition: excellent (used), GEA thermoformer, type: PowerPack NT, year of construction: 2014, foil width: 650 mm, dye: 4 x 3 (156 mm x 190 mm), total dimensions: 14500 mm x 1300 mm x 2800 mm GEA PowerGuide Speed inliner, year of construction: 2013, lining 3 to 1, belt width: 830 mm, total dimensions: 2900 mm x 1050 mm x 1300 mm Ndedpfx Ashkr Ddof Esc

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, film width: 775 mm, product height (max.): 2 mm, tool height: 100 mm, ILLIG SB74 C 9 Thermoforming and cutting machine Vacuum forming and cutting machine for plastics. Work table maximum 505x775 We have shutters to change the dimensions, 770x455, 400x770, 340x770 Maximum height of the matrix (mold) 100mm Foil thickness 0d 0.15 -2.0mm Year of production 1985 - in 2019 it underwent a comprehensive modernization of the automation, (diagrams in the photos) Visible in the photos. (control cabinet, controller, touch panel.) MACHINE LENGTH: 4500mm. MACHINE WIDTH: 1900mm. MACHINE HEIGHT: 2800mm. MACHINE WEIGHT: 2000 Kg. Ndedpjtp Suhsfx Af Eec 400V power supply Input power: 11.2 kW

Condition: ready for operation (used), Year of construction: 1990, operating hours: 45,353 h, functionality: fully functional, machine/vehicle number: 1537, product height (max.): 10 mm, plate length: 1,000 mm, plate width: 700 mm, Hybrid machine for thermoforming films or coils TECHNICAL DETAILS Nsdpowr Abzjfx Af Ejdc Maximum width: 700 mm Maximum plate: 1,000 x 700 mm Maximum sheet thickness: 10 mm Heating power: 31.1 kW Motor power: 5.59 kW EQUIPMENT - Plate loader type BE without preheating - Coil unwinding device type PR - Upper and lower table - Schleicher PDPF control director - Quick clamping of reduction frames and tools

Condition: reconditioned (used), functionality: fully functional, Plate size: 1000 x 1500 mm Forming area: 960 x 1460 mm Drawing depth: 600 mm Ndsdpfjwf D S Ujx Af Eec If you would like further details or a quote, please contact us.

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: 1506, film width: 1,000 mm, type of input current: three-phase, pressure: 6 bar, total width: 700 mm, total length: 1,000 mm, total height: 350 mm, input voltage: 400 V, sheet thickness (max.): 10 mm, heating capacity: 30 kW (40.79 HP), overall weight: 1,500 kg, tool height: 490 mm, Machine type: ILLIG UA 100 G Machine number: 1506 Manufacturing year: 1988 Total weight: approx. 1,5 tonns Power supply: 3x400V Total power consumption: 35 kWh Total (lower and top) heating: 30 kWh Type of the heating plate: ceramic Sheet size max.: 1000x700 mm Sheet size min.: 310x210 mm Nodpfxowfdd De Af Eedc Sheet thikness max.(manual loading): 12 mm Forming area max: 960x660 mm Forming area min: 270x170 mm Height of formed part positive: 350 mm Height of formed part negative: 350 mm Max. tool height: 490 mm Around 2020, the machine underwent a refurbishment. It received a new Omron control system to replace the original Schleicher, and we also refurbished the cabling and electrical cabinet.

Condition: ready for operation (used), Spare parts package for Kiefel KMD 85 consists of electronics, gears and motors see photos. Chain transport is not included in the pictures. Njdpjq Evmcefx Af Eedc

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, total width: 17,500 mm, total length: 68,000 mm, total height: 19,000 mm, overall weight: 5,500 kg, Universal and highly successful blister machine in the medium to high-speed category with intermittent platen sealing. Format range: max. forming film width: 300 mm max. web indexing ET: 280 mm max. web indexing MT: 97 mm Ndsdpfxor Nv Ico Af Ejc max. punching width: 284 mm max. drawing depth: 10 mm for PVC / Materials: Forming PVC/PVDC/ACLAR Included in the price are the following configurations of the machine: - Numatic valves - Forming film unwind stand - Forming film buffer - Stock monitoring for forming material - Forming foil unwind - forming station for PVC foil - Splice detection for forming film - Heat monitoring control for heating and sealing stations - Parts for heat fume extraction without exhaust unit - Forming station without plug assist - ET Index station after forming - Fill Section with rotary brush and safety flap - Electrical preparation for SimTap 2i feeding system - Fill control inspection system VisioChrom-CV - Lid foil unwind - Stock monitoring for lidding material - Print registration via elongation (stretching device) of lid material. - Splice detection for lidding material with 2 sensors for inside and outside - Sealing station - Cooling station after sealing - Index after sealing - Embossing station -MT index station - Punch station - cross blister outfeed Output: max. 600 blisters Index: max.280x284 mm Forming depth: max.10 mm

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, machine/vehicle number: DHD/250/100, die cushion stroke: 200 mm, total height: 4,500 mm, table width: 1,200 mm, table length: 1,000 mm, installation height: 900 mm, pressing force: 250 t, total length: 2,000 mm, total width: 2,700 mm, control cabinet height: 1,800 mm, control cabinet length: 800 mm, control cabinet width: 500 mm, die cushion force: 100 t, operating speed: 170 mm/s, reverse speed: 250 mm/s, input voltage: 400 V, stroke length: 600 mm, pressure: 235 bar, electrical fuse: 63 A, ram plate width: 1,200 mm, ram plate length: 1,000 mm, Euroblech 2024 trade fair machine - Hamburg location. Njdpfx Aettriaef Eodc

Condition: reconditioned (used), Plate size: 1000 x 1500 mm Forming area: 960 x 1460 mm Drawing depth: 600 mm Ndsdpfx Aswf D R Ref Eoc If you would like further details or a quote, please contact us.

Year of construction: 1999, condition: reconditioned (used), functionality: fully functional, A used and overhauled blister machine, model UPS1030 ET (94/125) Technical data - Format range Feed width maximum 142 x 255 mm Form depth maximum 10 mm Ndodpfxor Ii R Ue Af Eec - Output at least 15 cycles/minute - Output maximum 70 cycles/minute PVC - Output maximum 50 cycles/minute ALU Includes: - Form film roll carrier with two tension shafts, for maximum roll diameter 800mm, electromechanically foldable, including cutting and gluing table, painted neutral grey - Continuous conveyance of the form material with a contactless loop - Contact heating with 6 individually controlled heating zones (3 zones per plate) - Forming station prepared for PVC or aluminum form film with 4-column guide system - electr. Preparation for pore and crack detection (Visio-Scan) - Clamping pliers for securing the forming film in the forming station when the machine stops - Servo-controlled feed after the forming station, film shrinkage compensation guaranteed - Contact cooling with servo-controlled feed - Cooling water connection for upper and lower forming tool and lower sealing tool - Deflection with compensation pendulum - Filling section, approx. 1900mm with slanted brush and safety flap - Electrical preparation SimTap 2.i and brush feed - Sealing station for plate sealing and toggle lever drive, with 4 column guide (reinforced version with tuning domes) - Overload protection in the sealing station - Upper sealing plate automatically retracts when the machine stops - Cover film holder mounted on the back of the machine with 2 pneumatic tension shafts core diameter 76mm - Deflection shoulder for cover film with pressure presence control - Stretching station for cover film with touch probe controlled Stretching (print mark on the fly) - Contact cooling station after the sealing station - Feed before the punching station - Embossing station - Perforating station - Punching station, adjustable, including blister lowering - Waste cutter with integrated feed for immediate cutting from the waste grid - Compressed air monitoring - Sliding door panel, protective doors electrically switched for emergency stop when actuated 2-channel, made of plexiglass, hinged hood in the transfer area - Switch cabinet hinged on the back of the machine Mains 400/230 volts, 3/N/PE 50 Hz with neutral conductor and separate earthing. The stations were completely overhauled and the discontinued parts were replaced at the time of the overhaul. - Schneider PacDrive3 system with Pac2Touch - Machine paintwork RAL 9007 - Linear translator with: o Lowering unit in the punching station o Good blister outlet below the punch with slide rails o Individual vacuum translator o Individual ejection with ejection counter control o Collection belt with separate drive o Transfer belt o Good blister clearer when the following machine is at a standstill - CE conformity with declaration of conformity - Two sets of operating manuals

Condition: good (used), Year of construction: 2007, operating hours: 27,500 h, functionality: fully functional, machine/vehicle number: 069/530, Uhlmann blister packaging system UPS 4 ETX for processing PVC forming films and aluminum cover films Basic machine in modular technology and balcony design, with 12 modules: - Forming film holder with 2 pneumatic tension shafts for core diameter 76 mm, max. roll diameter 800 mm - Cutting and gluing table for forming film - Forming film unwinding, timed Nedovn R Ehopfx Af Esdc - 3-zone contact heating: - 6 heating circuits, individually adjustable - simultaneous heating of min. 3 feeds - Heating plates open automatically when machine stops - Forming station with 4-column lifting table guide - Clamping pliers for securing the film strip when machine stops - Filling section with safety flap, length 1,360 mm - Covering film unwinding on operator side with pneumatic tension shaft for core diameter 76 mm, max. roll diameter 300 mm - Plate sealing station with 4 columns Lifting table guide: - integrated overload protection - automatic lifting of the upper sealing tool when the machine stops - Cooling station - Free module for installing an additional station - Clamping pliers feed - Punching station with blister lowering - Waste cutter with integrated motorized transport of the punch grid - Monitoring of the compressed air supply with machine stop if the minimum value is not reached - Machine cover - Electromechanically locked protective doors on the operating side made of acrylic glass with individual identification for open doors/ hoods and display in the operating panel - Protective covers made of corrosion-resistant material - Fast format change thanks to: - Plug-in format parts - Plug-in connections for cooling water supply

Condition: good (used), Year of construction: 2011, Make WM Model FC 780E Year 2011 Condition Excellent Ndsdpettlzfofx Af Eoc Approx Working Hours 25,390 Stations Forming Cutting and Stacking Max Tool Size 780 x 570 mm Depth of draw 130 / 130 mm Max material width 810 mm Max Sheet Thickness 1.8 mm Max mould closing force 20,000 daN Maximum cycles-minute 45 Forming pressure 7 bar All details are subject to change and/or errors. All equipment is subject to availability and/or prior sale.

Condition: excellent (used), Year of construction: 2021, operating hours: 350 h, functionality: fully functional, The vacuum membrane press with a pneumatically lifted membrane is designed for heating and forming thermoformable materials such as PET felt, solid surface (CORIAN, HI-MACS, STARON, KERROCK, LG, PLEXIGLAS, and others), which can be molded into any shape after heat treatment. It is equipped with a heating system that shortens the bonding time and increases production efficiency. The TVG series vacuum presses are intended for both small and large manufacturing facilities. Manufacturing date 2021 Applications • Veneering flat and shaped elements with natural veneer (doors, frames, chairs, tables, furniture, coffins) • Laminating elements with HPL laminates in 2D format (kitchen countertops, window sills) • Pressing textured surfaces (stone veneer, decorative mats) • Manufacturing components using the sandwich method (columns, semi-circles, flat surfaces) • Wrapping car cockpit elements with leather (dashboard, gear shift lever, etc.) • Forming mineral-acrylic solid surface materials such as Corian, Staron, Hi-Macs, etc. • Forming thermoplastic plastics • Forming PET feltProduct Models – TVG Special Series Construction of the Press • Steel Frame: The press is built on a robust, welded steel frame ensuring stability and durability during operation. • Vacuum Table: The worktable is equipped with a vacuum system that securely holds the material in place during the forming process. • Membrane System: A flexible, heat-resistant membrane is pneumatically lifted and lowered, allowing precise pressure distribution on the material. • Heating System: Integrated heating elements (infrared or quartz heaters) provide uniform heat distribution, essential for effective thermoforming. • Control Panel: An intuitive control panel allows easy regulation of temperature, vacuum pressure, and membrane operation. • Vacuum Pump: A high-performance vacuum pump ensures efficient air evacuation for tight membrane adherence. • Safety Features: Equipped with safety sensors and emergency stop buttons to ensure operator protection. • Optional Components: Additional options may include programmable controllers (PLC), touchscreen interfaces, or automatic cycle control for improved process automation. • Technical Specifications Parameter Working field size (length × width), mm: 3000 × 1500 Maximum height of the processed element with 500mm width in the center of the field: 550 mm Heating plate size, pneumatically lifted: 2000 × 1000 Silicone membrane 700%, max temperature: 230°C Heater power, kW: 6 kW + hot air circulation Pump power, kW: 1.25 Vacuum pump capacity, m³/h: 40 Working vacuum, kg/cm² (bar): – 0.85 Protection level: IP53 Noise level, dB: < 70 Njdpjxqzzhofx Af Ejdc Voltage, V: 3P 400 50Hz Machine dimensions (mm): – Length 3500 – Width 1800 – Height (working) 2200 (3100) Weight, kg: 1250 The TVG Special models are equipped with a pneumatically lifted membrane, ensuring high precision and repeatability of forming processes. The reinforced structure and advanced control system guarantee reliable operation in continuous production environments.

Condition: used, Year of construction: 1979, functionality: fully functional, machine/vehicle number: 34.02/02, Vacuum forming machine / Thermoforming machine. The exact year of manufacture is currently unknown, but based on the model and the nameplate, we suspect the machine is from the 1980s. Njdpfsxqcupjx Af Eodc

Year of construction: 2025, condition: new, Vacuum membrane press VPR-3500 is a universal Press for the wood processing and thermoforming. The VPR-3500 press is also adjustable and mobile. Usage possibilities: Veneers / form gluing / wrapping... Coating of different profiles (veneer, paper, plastic...) Wood bending: Production of bent and glued components Vakkumsystem: work surface with vacuum channels for a uniform Unterdruckauch for large workpieces. Ndjdpfod Ecc Tex Af Eec Becker Vakkumpumpe / oil free / tank capacity 100 l Work surface: 3500x1500mm Pump output: KW 0.75 Vacuum pump flow rate: 40 m3/h Rubber membrane Dimensions exterior: 3600 x 1650 x 1000 mm Weight: 400 kg Location: Off the shelf 54634 Bitburg -free load-

Condition: excellent (used), Clint water chiller, which was cooling tooling for a Multivac thermoformer. Almost new condition. Ndedpfsumay Uex Af Esc

Condition: excellent (used), Complete slicing & packing line from CFS & Variovac consisting of 1x CFS Uni slicer whit scale and outfield conveyor, 1x Variovac Primus thermoformer whit 2x tools No 1. 1:2 277 x 177 mm Maximum deep 110 mm made for Swedish Wallet packets. No 2. 1:3 202 x 111 mm Maximum deep 110 mm. The line is fully complete and there is a knife sharpener including for the slicer. Convenience Food Systems automatic slicer line, consisting of: type: UNI-SLICER, number: 450.2251, year of construction: 2004, plastic belt, belt width: 230 mm, clearance: 260 mm x 140 mm, diameter knife: 420 mm, slicer dimensions: 2550 mm x 880 mm x 2170 mm. Dividing belt, wire belt, belt width: 270 mm, dimensions: 850 mm x 610 mm x 1110 mm. Check weigher, type: CW2000MK3 091.1992, year of construction: 2004, plastic belt, belt width: 275 mm, dimensions: 700 mm x 780 mm x 1100 mm. Outfeed belt, type: ATB 791 991.1994, plastic belt, belt width: 400 mm, dimensions: 3030 mm x 900 mm x 1260 mm. Knife sharpener, Ndsdsxl Tziopfx Af Eoc

Year of construction: 2025, condition: as good as new (ex-display), Vacuum membrane press VPR-3500 is a universal Press for the wood processing and thermoforming. The VPR-3500 press is also adjustable and mobile. Usage possibilities: Njdpfx Ajdvldaef Eodc Veneers / form gluing / wrapping... Coating of different profiles (veneer, paper, plastic...) Wood bending: Production of bent and glued components Vakkumsystem: work surface with vacuum channels for a uniform Unterdruckauch for large workpieces. Becker Vakkumpumpe / oil free / tank capacity 100 l Work surface: 3500x1500mm Pump output: KW 0.75 Vacuum pump flow rate: 40 m3/h Rubber membrane Dimensions exterior: 3600 x 1650 x 1000 mm Weight: 400 kg Location: Off the shelf 54634 Bitburg -free load-

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, Multivac R-140 thermoformer year of construction 2005 for both hard & soft film. Foil with 422 mm, Tool Advance 330 mm, Built in Busch 100cc vacuum pump, MAP machine, 4x different tool splittings. No 1. 2.4 17x x 130 mm Nedpsxl D U Tefx Af Eodc No 2. 1.1 283 x 365 mm No 3. 2.2 365 x 132 mm No 4. 2.2 283 x 175 mm

Year of construction: 2016, operating hours: 3,781 h, condition: ready for operation (used), functionality: fully functional, Multivac R245 Thermoformer year of construction 2016 whit 4x different tool sizes. Built in Busch vacuum pump, Spinners for waste plastic, Foil width 462 mm, Advance 375 mm, Tools. 1x 1:1 425 x 332 mm Max deep 150 mm. 1x 1:2 332 x 205 mm Max deep 150 mm. Nsdpexl D Ndsfx Af Eodc 1x 2:2 205 x 156 mm Max deep 150 mm. 1x 1:3 332 x 131 mm Max deep 150 mm. Including extra parts and heating plates very nice condition and well maintained machines since new by it's first owner.

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, Colimatic Thera 650 Thermoformer year of construction 2000. 1x tool splitting 350 x 210 mm Maximum deep 150 mm. ideal for large products. Foil width 422mm. Nsdpfxjxl D Iys Af Ejdc