Used Tec Freetec for sale (105)

Condition: not inspected (used), Year of construction: 2004, functionality: unexamined, machine/vehicle number: 10651-7, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, table load: 800 kg, spindle speed (max.): 42,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distance X-axis: 600 mm Travel distance Y-axis: 450 mm Travel distance Z-axis: 300 mm Rapid traverse X-axis: 30 m/min Rapid traverse Y-axis: 30 m/min Rapid traverse Z-axis: 30 m/min Maximum spindle speed: 42,000 rpm Spindle taper: HSKE40 Number of spindles: 1 Table width: 405 mm Table length: 405 mm Max. table load: 800 kg Number of tool magazine slots: 26 MACHINE DETAILS Control system model: RMS6, version 3.18 Input voltage: 400 V Dimensions & Weight Dimensions (L x W x H): 4,210 x 2,350 x 2,600 mm Weight: approx. 7,000 kg Fodsy Nzuhopfx Ak Uopl EQUIPMENT Documentation/manual Infinitely variable spindle speed control Chip conveyor Blum laser 3D tool setter Hirschmann 9000 zero-point clamping system Electronic handwheel Extor extraction system

Condition: good (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 07/2027, type of input current: three-phase, Doja Tec Model: BK2-VA with speed controller stainless steel construction Fpedpfx Asyy Sk Ijk Usl for coating products Connection: 400V, 16 A CEE plug + compressed air Dimensions: 3000 x 970 x 1380 mm (W x D x H) Used machine Option: Delivery service directly into the bakery

Condition: new, maximum load weight: 32,965 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, Year of construction: 2025, Equipment: ABS, New vehicle! Buy, rent, or rent with a purchase option by arrangement! 30m³ D-Tec V2A Slurry Tanker Trailer / Rear-Steering Axle / Lift Axle / NEW VEHICLE ---- * Manufacturer: D-Tec * Model: SV 2006 * NEW VEHICLE * Gross weight: 39,000 kg * Unladen weight (manufacturer specification): 6,035 kg * Payload: 32,965 kg * Axles: 3x Valx axles / 1st axle liftable / 3rd axle rear-steering / disc brakes / traction assist * Suspension: air suspension with raising & lowering facility * Tires: 385/65 R22.5 on steel rims * Color: Chassis RAL 9005 black, tank body RAL 7015 grey * Volume: 30m³ / Ø 2.20 m / single chamber * Wabco EBS * Vogelsang rotary lobe pump * Max. flow rate: 6,000 L/min * Swivel outlet at the rear * 8" docking funnel on top, sealable with a manual gate valve * Filling and venting with pneumatic shut-off valve including safety for all air-operated valves * 1" ball valve on pump right side * 4" flushing pipe with two 2.5" free-fall outlets (1x at the front and 1x in the center of the tank) Fodpfx Ajx Suxlek Uepl * Automatic pump shutdown * Pneumatic control box at rear left * 1x foldable dome cover * 5 m hose racks left and right (galvanized steel) * Fill level indicator front left * Operating temperature 0-60 degrees Celsius * Side access ladder left * Empty load supports * Single mudguards * Saddle height 1,180 mm * 24V lighting system * 2x LED work lights at rear * 2x LED work lights left and right German trailer!! German documents!! NEW VEHICLE!! New vehicle! Buy, rent, or rent with a purchase option by arrangement! Note on potential errors in the listing: Despite careful preparation of the ad, errors may occasionally occur in the text or information provided. We accept no liability for mistakes, changes, or prior sale. All details are provided without guarantee. Please contact us to verify details or clarify any questions.

Condition: refurbished (used), functionality: fully functional, 5-axis HSC milling machine Röders RXP500DS with linear direct drives in all axes and torque drives in the rotary axes. The machine will be completely overhauled, inspected, and measured in our workshop. The machine will once again meet new machine tolerances! Travel ranges: X450mm, Y400mm, Z240mm Distance spindle/table: approx. 315mm - Linear direct drives in all axes - wear-free - Tool changer, 42-position Fpedjzmgt Iepfx Ak Uel - Cooling unit for drives, milling spindle, and control cabinet - Measuring laser for fully automatic measurement of milling tools (length/diameter/contour/taper angle) as well as wear monitoring including tool cleaning before measurement - Handbox - Remote maintenance - Automatic 3D probe including calibration sphere in the tool changer - Minimum quantity lubrication - Emulsion cooling - Spindle HSK40E with max. 42,000 rpm - Spindle length compensation - Zero-point clamping system EROWA integrated into the machine table - Manual chuck control - Automation RC2 pallet changer for 45 Erowa ITS50 pallets - ideal for the production of electrodes An inspection of the machine in operational condition is possible at any time. You can also find information about the type and scope of our overhauled machines on our website or on our Hüttmann YouTube channel.

Year of construction: 1994, condition: good (used), Used M-Tec Ploughshare mixer Fpodpoir E E Eefx Ak Ujl Type MS-150 Batchmixer Minimal mixing volume 350 dm3 Maximum mixing volume 1500 dm3 Motor 37kW 115 rpm Incl. Sampling unit specicon

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 10651-7, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 300 mm, table load: 800 kg, spindle speed (max.): 42,000 rpm, TECHNICAL DETAILS Travel X-axis travel: 600 mm Y-axis travel: 450 mm Z-axis travel: 300 mm Rapid traverse X-axis rapid traverse: 30 m/min Y-axis rapid traverse: 30 m/min Z-axis rapid traverse: 30 m/min Work Table Table width: 405 mm Table height: 405 mm Table load capacity: 800 kg Rotary table diameter: 405 mm Spindle Maximum spindle speed: 42,000 rpm Spindle taper: HSKE40 Number of tool magazine pockets: 26 MACHINE DETAILS Control model: RMS6, Version 3.18 Dimensions & Weight Dimensions (L x W x H): 4,210 x 2,350 x 2,600 mm Weight: approx. 7,000 kg Input voltage: 400 V EQUIPMENT Documentation/manual Fedpsxvybdofx Ak Uepl Continuously variable spindle speed Chip conveyor Blum laser 3D tool probe Hirschmann 9000 zero-point clamping system Electronic handwheel Extor extraction unit

Condition: ready for operation (used), Year of construction: 1995, Net/gross volume mixer: 1500/2000l, useful volume secondary tank: 1790l, motor power: 55kW, length: 4700mm, width: 2500mm, height: 3400mm, weight mixer/ secondary tank:3.9/ 1.21t, with extensive documentation, on-site inspection is possible. Fjdpfxern Rc Ds Ak Ujpl

Condition: used, W x L 60 cm x 250 cm Fpsdpfou Arh Rox Ak Usl

Condition: excellent (used), Continuous mixer M-tec D 10 Drive power: 2.2 kW Mixing capacity: approx. 20 l/min Fodpjirfp Iefx Ak Uopl 14 units available In very good, ready-to-use condition, directly from production!!!

Condition: new, maximum load weight: 29,860 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2026, Equipment: ABS, D-TEC Slurry Tanker SV 2006 BASIC Specification: * Tank volume: 30m³, Ø2200 mm, wall thickness 3 mm, temperature range 0–60°C * Extended swivel arm * Flush line 4" with 2 gravity discharge points of 2.5" each, one at the front and one in the middle of the tank * Flush line on the left side via tension cables over the hose trays * Automatic pump shut-off. Axle also equipped with anti-spray mudguard * Holder with 2 wheel chocks * Left and right (narrow and tall) hose racks, each 5m, made of galvanized steel (250 mm wide, 190 mm high) Pump: * Vogelsang pump, 6,000 L/min Axles: * 9-ton Valx axles, Ø430 mm disc brakes, ET120 * 1st axle as lift axle * 3rd axle as steering/lazy axle Brakes: * Wabco EBS braking system * TPMS – Wabco Tyre Pressure Monitoring System (compliant with R141) * No electronic air suspension Additional Options: * Third axle as self-steering axle Lift Axle: * Automatic lift function on the first axle, load-dependent activation, or by pressing the brake 3 times * Starting assistance: load transfer to the 2nd and 3rd axles up to 130% below 30 km/h Tyre Size: * 385/65 R22.5 Fjdpjyhi Huofx Ak Uopl Tyres: * Apollo Lighting: * 24-volt lighting system Lighting options: * Flashing side marker lights * Working lights left and right at the first axle * 2x LED working lights at the rear (1x left, 1x right, mounted on the hose racks) Paintwork: * Tank painted in RAL 7030 STONE GREY * Chassis painted in RAL 7016 ANTHRACITE GREY Miscellaneous: * Gravity discharge connection at the rear of the pump; connection with manual valve (6" ball valve) for tank emptying; venting tank made of stainless steel (V2A) * Docking funnel (8") on top at the rear. Pipe leads down to the bottom of the tank with a manual slide valve.

Condition: new, maximum load weight: 29,965 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2026, Equipment: ABS, Brand new FD-Tec 3-axle tank semi-trailer * SV2011-22-R300 (Tank volume: 30 m³, material thickness: 3 mm stainless steel, temperature range: 0–60°C.) * Former designation SV2006 Basic / Now SV2011 * 8" manual docking funnel * 6" gravity discharge connection * 4" manual cleaning line with 2 x 2.5" nozzles (1 at the front and 1 in the center of the tank) * ABS braking system by Wabco, no electronic air suspension * 9-ton VALX axles, Ø430 disc brake, ET120 Fodpfx Aoy Sqrbsk Uopl * Automatic lift axle on the first axle * Raising/lowering via control from the EBS modulator * Start-up assistance: 2nd and 3rd axles can be loaded up to 130% under 30 km/h * Third axle is a self-steering axle * Apollo Vredestein 385/65R22.5 tires * 24-volt lighting system: 2 x LED work lights at the rear, 1 x on the left side * Work lights left and right by the first axle * Standard 15-pin connection + 2 x 7-pin connectors * Flashing side marker lights * Ball valve for drainage at the lowest point of the tank * Vogelsang pump, 6,000 L/min (Pump manufacturer recommends a leakage oil return line) * Automatic pump shut-off * 2 wheel chocks * Left and right (narrow and tall) galvanized steel hose trays, each 5 m (250 mm wide, 190 mm high) * Tension cables above the hose trays * Tire pressure monitoring system, air suspension with lift/lower valve, rotary slide valve * Tank painted with two coats of paint – Category A (without clear coat) * Tank painted in a single color RAL 7030, STONE GREY * Chassis painted in a single color RAL 7016, ANTHRACITE GREY * ...

Condition: excellent (used), functionality: fully functional, machine/vehicle number: S8758, A machine for gluing cardboard books. Gluing is done using 16 heads. This allows selective application of glue where it is needed. Ideal for gluing board books with flaps, board books with puzzles Fpjdpfx Aswhc U Tsk Uel

Condition: used, Machine not operational - control system not functioning Available at a special price Double-column hydraulic press ALPHA TEC -- ALPHATEC Type RPS 5000 Factory No. 300487, Year of Manufacture 2006 Pressing force: 500 tons Distance between columns (front and rear): 2520 mm Table area: 2500 x 2500 mm Ram area: 2500 x 2500 mm Ram stroke: 600 mm Maximum installation height: 600 mm Table height above floor: approx. 900 mm Tank capacity: approx. 1000 liters Ram retraction force: approx. 22 tons Adjustable forward speed: 100-800 mm/s Pressure build-up to 5000 kN: approx. 0.7 sec. Return stroke speed: approx. 300 mm/s Main motor power: 75 kW Control pump motor power: 2.2 kW Power supply: 400 Volt, 50 Hz Fpedpfx Asdzqptek Uel - 8-fold flat guide for the ram - Hydraulic ram locking in the top dead center position - Adjacent control cabinet (200 x 50 cm) - Electrical control system SIEMENS PLC S7-314 - Operation via SIEMENS OP 170-B (5.7") - 2-hand control panel located beside the machine - Floor-level installation - Table top 2510 x 2530 x 135 mm (approx. 6700 kg) - Central lubrication system - Operating manual with circuit diagrams Space requirement (L x W x H): 372 x 260 x 460 cm Space requirement for horizontal transport (L x W x H): 460 x 372 x 260 cm Weight: approx. 50 tons The machine was used for straightening heated steel flanges. From insolvency – in good condition.

Condition: excellent (used), Possibility of simultaneous welding and plasma cutting. Output power: at 60% 400A/36V, at 100% 310A/32V. Fpjdpfsud Rl Usx Ak Uel

Condition: new, maximum load weight: 28,900 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,184 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,722 mm, Year of construction: 2026, Equipment: ABS, Bodywork * Docking funnel 8" mounted at the upper rear, behind the tank, lockable with a manual slide gate * Direct idling at the rear side * Automatic pump shut-off * Lincoln centralized lubrication system for optimal time-based lubrication of slewing rings and axles (for drum brake 36P) * Bracket with two wheel chocks Pump * Vogelsang pump, capacity 6,000 L/min Axles * VALX axles with drum brakes, 9 tonnes, offset 0 Fpedoxmudnepfx Ak Uel Brakes * WABCO EBS braking system * WABCO tire pressure monitoring system according to R141 * TPMS system Axles * Forced-steering axles Tire size * 385/65 R22.5, 9 t Tires * Brand: APOLLO Lighting * 24-volt lighting system * Side marker lamps with integrated flashing function * Work lights left and right at the first axle * Two LED work lights at the rear (one left, one right, mounted on the hose racks) * Two 7-pin connectors and standard 15-pin connector Accessories * Ball valves for complete tank emptying * Stainless steel vent container Paintwork * Tank painted RAL 7030 stone grey * Chassis painted RAL 7016 anthracite grey

Condition: used, functionality: fully functional, WLD-TEC Gasprofi 1 Gas Burner with bottle and pedal. 2 for sale. 1 piece/200 EUR. Fpsdpfx Ajubc Hfjk Usl Good working condition. Please check out our other listings as well.

Condition: excellent (used), For Sale: Silomat Pneumatic Conveying Systems / Silo Pumps (Gravity & Pressure Types) We offer a wide range of Silomat conveying systems from various brands for sale, available in both gravity (free-fall type) and pressure configurations. All units have been completely OVERHAULED and professionally reconditioned: Fodpelf Niqofx Ak Ujpl Oil replacement New composite vanes New bearings Professionally sandblasted and fully painted The machines are ready for operation and available for purchase either with brand-new accessories or without. Available Gravity / Free-Fall Models (approx. 40 units in stock): PFT E100L MALTECH MB100 M-TEC F100E Contact us for more details, pricing, and available configurations.

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 320 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 200 mm, spindle speed (max.): 50,000 rpm, overall weight: 3,800 kg, workpiece weight (max.): 200 kg, space requirement width: 2,000 mm, space requirement length: 1,800 mm, space requirement height: 2,000 mm, Equipment: documentation/manual, Röders RXP300 -overhauled- The machine is completely overhauled, checked and measured in our company. The machine again meets the new machine tolerance! Working area: X-axis: 320 mm Y-axis: 300 mm Z-axis: 200 mm (height) The clearance height is 390 mm above the machine table without chuck. Machine table: Size: 370 mm x 350 mm Workpiece mass: Maximum 200 kg Axis drives: Highly dynamic linear motors in all axes with integrated cooling. Feed rates: 0 - 40,000 mm/min in all axes. Spindle: HSK25E 50,000 rpm Tool changer: 42-way Automatic 3D probe Control: Röders RMS6 in current version (2024) A viewing of the machine in operational condition is possible at any time. You are also welcome to find out more about the type and scope of our reconditioned machines on our website or on our Hüttmann YouTube channel. Fpedpfovvigmex Ak Uol

Condition: new, Year of construction: 2026, Mobile paternoster stacking system - For edged boards - Lengths: from 2-5m - Output: 20-30 boards per minute - Total connected load: approx. 15 kW - Total weight: 3940 kg Fpodpjzgaqyefx Ak Usl This is a "PLUG and PLAY" system. The entire stacking machine can be positioned at the desired location using a forklift. A power connection via a CE plug is sufficient, and the system starts as shown in the video. Various stacking heights and stacking widths can be pre-selected.

Condition: refurbished (used), functionality: fully functional, travel distance X-axis: 475 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 400 mm, workpiece weight (max.): 200 kg, rotational speed (max.): 42,000 rpm, table diameter: 450 mm, 5-axis Röders Tec RXP800DS -completely overhauled- The machine is completely overhauled, checked and measured in our company. The machine again meets the new machine tolerance! Working area: - X-axis: 475 mm - Y-axis: 600 mm - Z-axis: 400 mm - Clearance height: 500 mm Tool changer: 52-way Spindle: HSK40E max. 42,000 rpm Tool measuring laser for tool measurement Handbox Minimal quantity lubrication Prepared for extraction system (e.g. for graphite) Spindle compensation Accuracy package Control: Röders RMS6 in current version A viewing of the machine in operational condition is possible at any time. You are also welcome to find out more about the type and scope of our reconditioned machines on our website or on our Hüttmann YouTube channel. Fjdpfx Aovvlmcsk Ujpl

Condition: new, table width 1500 mm table length 3000 mm burner heads 1 Control CNC Fpedpfx Asiid Hwek Uel CNC plasma cutting system *NEW - AVAILABLE FROM STOCK* Furnishing: Cutting area 1,525 x 3,050mm Consisting of guiding machine, CNC control Plasma torch holder incl. torch height control, incl. Radio remote control and cross-laser for positioning, 1 license FastCAM programming software with Auto Nest Function and DXF,DWG import. Autogen set consisting of gas control solenoid valve, injector Machine torch torch holder, capacitive Height control, cutting range 10 - 50 mm plasma system Hypertherm Powermax 85 Sync CPC System Cutting range 1 - 20mm, cutting gas air Machine torch Smartsync 180° - 15.2 meters Machine is offered ex works. Without accessories (dye, anti-rust, aint mushroom, etc.) - further costs on request!

Condition: new, Briwa-tec Rubin 1200 side channel blower (176 kg) with air filter, pressure/vacuum relief valve, additional silencer, and various connecting pipes (26.5 kg). Unused, 100% functional. Scope of delivery as shown in the photos. Fodpoi D Uk Asfx Ak Ujpl

Condition: used, Wig welding machine L-TEC, Inverter TIG 200 DC type WIG welding machine for direct current DC Serial no. 184548, year of manufacture approx. 1994 Power: 200 Amps = 60% duty cycle 155 Amps = 100% duty cycle Adjustment range: stepless Current type: DC (direct current) Mains connection: 400 Volts, 50 Hz, 32 Amps plug - 4 meter hose set with central connection and hand torch - with remote potentiometer (foot switch) - gas pressure regulator - DC only Fpedpjdzqb Eofx Ak Uol - HF ignition Space requirement L x W x H: 850 x 480 x 740 mm Weight: approx. 150 kg The welding test yields very good results when welding stainless steel with direct current. Otherwise in good condition.

Condition: reconditioned (used), travel distance X-axis: 310 mm, travel distance Y-axis: 294 mm, travel distance Z-axis: 210 mm, overall weight: 3,000 kg, spindle speed (max.): 50,000 rpm, Used HSC machine RXP400DS/ RXD5 -overhauled- The machine is completely overhauled, tested and measured in our company. The machine again meets the new machine tolerance! Working area: - X-axis: 200 mm - Y-axis: 294 mm - Z-axis: 200 mm - Drives of the linear axes: Linear motors in all axes. - Drives of the rotary axes: Highly dynamic direct drives with integrated cooling. - Feed rates 0 - 40,000 mm/min in all linear axes. - Network connection: - Tool measuring laser: Diameter and contour measurement, wear monitoring and breakage control of the milling tools. - Chuck control, 1st chuck - Emulsion cooling with mechanical oil mist extraction -RMS Main Job Manager - Spindle max. 60,000 rpm HSK 25 - Tool changer 12-way row, optional tool changer conversion to chain Fsdpfx Akslzhhce Uopl - High-precision option - Remote maintenance via Teamviewer - Transport dimensions of machine: W 2,425 x L 1,925 x H 2,140 mm - Weight: Approx. 3,000 kg A viewing of the machine in operational condition is possible at any time. You are also welcome to find out more about the type and scope of our overhauled machines on our website or on our Hüttmann YouTube channel.

Condition: good (used), diamond core drilling machine -Drill stand Fsdpfxeb A H U As Ak Uepl -vacuum pump -Water pump reservoir -Core drill bits: Ø 15/20/3x 25/3x 28/32/40 mm