Used Table Lips for sale (17,120)

Condition: new, clamping range of chuck 80 - 280 mm height 67,5 mm daylight 100 mm Itedpfofv Awpsx Ahbsn external diameter Futter 300 mm external diameter Spannhebel 480 mm weight 13 kg Characteristics: • Self-centering. • Reversible jaws. • Fixed clamping levers allow fast workpiece changes. • Low weight and flat design minimize the center of gravity. The D-D quick chuck enables a quick product change and is suitable excellent with frequent component changes. You do not need a loose one Quick release wrench, as the levers are integrated into the quick release chuck.

Condition: new, table diameter 600 mm table load 0,6 t swivelling range 0 - 90 Grad turning speeds 0,1 - 1,8 U/min max. torque on the faceplate 450 Nm table pass 80 mm welding current 500 Ampere total power requirement 0,18 + 0,18 kW weight of the machine ca. t ELDING TABLE WITH LARGE THROUGH BORE • Self-locking gearbox, no pre- or after-run with eccentric load. • Electronic components from Siemens and Schneider. • Frequency-controlled, very accurate speed control. • Turntable with large through hole and T-slots. • High stability through a clever construction. • CE certificate. • Very good price / quality ratio. Itedpfx Asfv Awzohben • The D-TLP series comes with remote control and foot pedal (left / right). No original pictures. Design but identical.

Condition: new, Year of construction: 2020, 3000 kg load capacity, welding rotary table, very robust Speed continuously adjustable from 0.05 to 0.7 revolutions per minute Rotary table diameter 1400 mm Iodpfefv Huuex Ahbotn Tilting up to 120° Height in horizontal position 1300 mm, tilted to center 1050 mm Length 2.0 m x width 1.4 m Handheld remote control with digital display and foot-operated remote control

Condition: as good as new (ex-display), Protec KT 3000 HV, hydraulically adjustable in height Load capacity: 3000 kg Handheld remote control with digital display Dual-pedal remote control Itedofxpggopfx Ahbsn Height: approx. min. 700 mm when tilted to the center, max. 1400 mm Diameter of the turntable: 1400 mm Tilt angle: min. 135° Speed: 0.05 to 0.9 rpm Motor power: 3 kW

Year of construction: 2022, condition: new, 3000 kg load capacity, welding rotary table, very robust Speed continuously adjustable from 0.05 to 0.7 revolutions per minute Rotary table diameter 1400 mm Tilting up to 120° Height in horizontal position 1300 mm, tilted to center 1050 mm Ijdpfofxphlox Ahbjtn Length 2.0 m x width 1.4 m Handheld remote control with digital display and foot-operated remote control

Condition: new, Year of construction: 2024, Protec KT 5000 welding rotator table Isdpfjfkt Ebox Ahbotn Complete set including dual foot pedal control and hand-held control with digital display 5000 kg load capacity Diameter of clamping plate: 1500 mm Height in horizontal position: 1500 mm Height in tilted position (to center): 1500 mm Speed continuously adjustable from 0.01 to approx. 0.7 RPM Tilt up to 120° Length: 2100 mm Width: 1500 mm

Condition: as good as new (ex-display), Year of construction: 2022, Protec KT 3000 HV, hydraulically adjustable in height Load capacity: 3000 kg Handheld remote control with digital display Dual-pedal remote control Height: approx. min. 700 mm when tilted to the center, max. 1400 mm Diameter of the turntable: 1400 mm Itedpfx Aofky Iqshbon Tilt angle: min. 135° Speed: 0.05 to 0.9 rpm Motor power: 3 kW

Year of construction: 2022, condition: new, 3000 kg welding rotator, hydraulically adjustable in height Speed: 0.05 to 0.8 revolutions per minute Very robust, complete set with hand-held and dual-foot remote control Table diameter: 1200 mm Tilt: 0 to 120° Total height adjustment: approximately 700 mm Height adjustment with the disc in a vertical position to the center: Iedpfx Asff Ngiehbjtn 960 mm to 1910 mm Dimensions with the disc in a horizontal position: 1200 mm to 1900 mm We offer the rotary tables with capacities of 600 kg, 1000 kg, 3000 kg, and 5000 kg.

Year of construction: 2022, condition: as good as new (ex-display), 3000 kg load capacity welding rotary table, very robust Speed continuously adjustable from 0.05 to 0.7 rpm Rotary table diameter 1400 mm Tilt up to 120° Height in horizontal position 1300 mm, tilted to the center 1050 mm Length 2.0 m x width 1.4 m Itjdpfxsd A Etre Ahben Hand and foot remote control

Condition: as good as new (ex-display), 600 kg load capacity, height-adjustable welding turntable with a plate diameter of 1000 mm. Height: min. 0.65 m, max. 1.530 m. Speed: 0.01 - 1.1 rpm. Tilting angle: up to 135°. Hand and foot remote control with speed display. Very robust. Itjdpfx Ajd D D Hljhbon

Condition: excellent (used), Severt L manipulator, 4 units, lifting capacity of 1000 kg and 2000 kg, price per unit. PRODUCT TYPE: S10 TYPE CODE: S10.1-1HH 1000kg / 2000 Kg LIFTING CAPACITY (KG): 1000 / 2000 Kg STROKE (MM): 1000 ARM LENGTH (MM): 1500 / 2000 BENDING MOMENT CLAMPING PLATE (NM): 1400 BENDING MOMENT ARM (NM): 3000 Iodjzbl Sgspfx Ahbotn FREQUENCY CONVERTER: yes LIFTING DRIVE: hydraulic SELF-WEIGHT (KG): 1700

Condition: good (used), Altendorf WA8 sliding table saw Isdeznw Dyjpfx Ahbotn Main motor: 5.5 kW, 3 cutting speeds Scoring saw: 0.75 kW, Table length: 320 cm, Tilt: 0-45 degrees, electrically adjustable Blade height adjustment: electrically adjustable Max. blade diameter: 400 mm, Cutting width on the right side: 1370 mm. Good condition, fully functional.

Condition: ready for operation (used), load capacity: 750 kg, 3-axis welding positioner, 750 kg load capacity, control panel Tilt and speed infinitely adjustable from 0.05 to 1.0 rpm Clamping plate diameter: 0.8 meters Height when tilted to center min. approx. 0.45 m + 0.1 m base, max. 1.1 + 0.1 m base Height horizontal min. approx. 0.56 m + 0.1 m base Length 2.0 m, width 1.05 m Itjdpfx Ahexxvgzsbjn

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Assembly table, workbench with tilting mechanism, from 0° (horizontal) to 85°. Length 2900 mm Depth (height) 1600 mm Overall height of the table in the vertical position 2000 mm Roller conveyor length 2000 mm Width 160 mm Iedpfsz Nm Dwex Ahbstn Two pneumatic main cylinders for tilting Two foot pedals Four pneumatic short-stroke lifting cylinders at the rear

Condition: used, Altendorf Wa80 panel saw, 320cm sliding table on round rods, Main motor 5.5KW, 3 rotation speeds, Scoring unit 0.75KW, 0-45° tilt, electrically adjustable, Saw blade up/down electrically adjustable, Max blade diameter 400mm, Iedpfjyhdb Hjx Ahbstn Max cutting width at right rip fence 130cm, Machine tested, fully functional.

Condition: used, Heavy-duty precision panel saw SCM SI 550 E Class Version: Carpentry/Joinery Cutting length 3200 mm Cutting width approx. 1500 mm Main motor 11 kW 3 speeds 2500/3000/4200 rpm Miter stop with length compensation Saw blade up to 550 mm diameter Electrically adjustable lifting and tilting of the saw blade with digital display Machine from retirement sale / first delivery in 2011 Machine has been WORKSHOP-TESTED and is in TOP CONDITION Machine is connected and ready for demonstration at the showroom Available from stock in Lieboch Itjdpfx Ajz D Szcehbsn

Condition: excellent (used), Horizontal/vertical rotary table Chuck: Ø 350 mm Shelf diameter: Ø 400 mm Height without mandrel: 140 mm Total height: 250 mm Ijdpfx Aoz I A I Uohbetn Base dimensions: Length 430 mm x Depth 370 mm Weight: approx 150 kg Possibility to work horizontally or vertically The increment is done by the front handle

Condition: used, Year of construction: 1991, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: AC, tilt adjustment saw blade: 46 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, overall weight: 1,100 kg, Equipment: saw blade guard, scorer, Altendorf F45 Panel Saw – Year of Manufacture 1991 For sale is an Altendorf F45 panel saw, year of manufacture 1991. The machine is equipped with electric height adjustment and electric tilting adjustment of the saw unit, thus offering comfortable operation for precise cutting work directly above the control panel. The machine is operated via the upper control unit. In addition, the F45 features a scoring saw and the proven Altendorf Duplex fence. Equipment: - Manufacturer: Altendorf - Model: F45 - Year of Manufacture: 1991 - Machine No.: 91-09-280 - Main motor: 5.5 kW - Scoring saw motor: 0.75 kW - Electric height adjustment Ijdpfx Aez Ig Niehbetn - Electric tilting adjustment - Upper control - Scoring saw - Altendorf Duplex fence - Digital parallel fence, manually adjustable - Max. saw blade diameter: 350 mm, larger possible without a riving knife. - Panel sliding table - Rip and miter fence The machine shows signs of wear and tear commensurate with its age and is in used condition. The robust construction of the Altendorf F45 makes it a proven panel saw for use in carpentry and woodworking businesses. Inspection and test run possible by arrangement.

Condition: good (used), functionality: fully functional, Internal article number: 26090 Rotary table top Diameter: 380 mm Direct and indirect division possible Well-maintained original condition Itjdpfx Aez Hauvehbon Minor milling marks on the surface, but these are not deep. The rotary table comes from an educational institution and is in a well-maintained condition.

Condition: good (used), functionality: fully functional, Internal article number: 26091 Itodpoz Ha Aasfx Ahbon Round table cover Diameter: 300mm With optics. No connection cable included. Well-maintained, original condition. The round table comes from an educational institution and is in good condition.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, automatic tiltable float glass cutting table for half jumbo sizes workable dimension : 3760 x 2760 mm 5 tool store the pc is supplied complate with CR ROM drive , 3,5" modem and network card , color monitor and windows with straight and shaped optimisation Isdpfoz Imnfjx Ahbstn possibl for vinyl cut and digitalization with laser for templates glass thikness : 3 - 19 mm acceleration speed : 150 m/min cutting tolerance : 0,15 mm breaking bars : 2 + 1 workable table height : 900 mm machines sizes : L x w x H = 6000 x 2275 x 2250 mm installed power : 5,6 Kw weight : 2500 kg

Condition: good (used), Equipment: foot remote control, The rotary table is motor-driven and features a foot switch; the clamping range can be adjusted to suit any component. Upon request, a perforated table of any size can be supplied. Iodpez Hvl Rofx Ahbjtn 3000 kg load capacity, motor-driven braking system. One side is driven, the other side rotates passively. Center height from the floor: 1000 mm, mounting plate size: 700 x 450 mm. Two sets of the same size are available.

Condition: good (used), functionality: fully functional, Robust RAPID PK 100 table saw in a solid design, featuring a sliding table and adjustable fence system. The saw blade can be tilted up to 45°. With a saw blade diameter of 250 mm, the maximum cutting height is approximately 75 mm. The cutting width to the right of the saw blade is approximately 600 mm. The saw arbor is driven by a narrow V-belt. A saw blade is included in the scope of delivery. Technical data: Motor power: 3 kW Three-phase motor, protection class IP54 Motor speed: 2,860 rpm Saw arbor drive via narrow V-belt Saw arbor speed: 5,200 rpm Table size: approximately 850 × 700 mm Cutting width to the right of the saw blade: approximately 600 mm Ijdpfx Ahjz Eh Nrobetn Cutting height: approximately 75 mm with a Ø 250 mm saw blade Saw blade can be tilted up to 45° Dust extraction port on the rear of the machine: Ø 100 mm Dimensions: approximately 800 × 1,200 × 1,400 mm Weight: approximately 250 kg Equipment: Sliding table Length/cross stop with scale Parallel fence Tiltable saw blade up to 45° Dust extraction connection Ø 100 mm Includes saw blade The machine can be inspected and tested under power after arranging an appointment. Transport is possible for an additional charge! The machine will be inspected before sale. For used machines with a year of manufacture of 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information is without guarantee.

Condition: used, Technical details: spindle diameter: 110 mm x-travel: 2000 mm y-travel: 1600 mm z-travel: 2000 mm control for program: TNC Heidenhain 360 B-axis (table): ja Iodpfx Ahju Idp Dobjtn W-axis (spindle longitudinal): Planschieber mm tool taper: ISO 50 table-size: 1400 x 1250 mm machine dimensions LxWxH: 8,0 x 6,0 x 4,5 m weight of the machine ca.: 28 t with face slide 700mm , electronic hand control *

Condition: used, FARO Mobile 3D coordinate measuring arm / Portable CMM FARO Titanium Arm 2.4 m measuring range · Single Point 0.051 mm · Volumetric ±0.072 mm For sale is a used mobile 3D coordinate measuring arm from the manufacturer FARO. The measuring system is suitable for industrial measuring and testing tasks, quality assurance, component measurement, manufacturing metrology, and for general geometric measuring tasks. Technical data: Manufacturer: FARO Model: Titanium Arm Device type: Mobile 3D coordinate measuring arm / Portable CMM Date of manufacture: 06.12.2004 Revision: 21.0 Made in Switzerland Measuring range: 2.4 m Single Point: 0.051 mm Volumetric: ±0.072 mm Certification date according to nameplate: 07.06.2016 PLANOLITH granite measuring plate: Accuracy class: DIN 876/1 Permissible deviation: 0.022 mm Actual deviation: 0.00498 mm Test date: 03.11.2003 Weight of granite plate: approx. 460 kg Dimensions of measuring table: approx. 1200 × 800 × 940 mm (L × W × H) Total weight of measuring table: approx. 560 kg Equipment: FARO Titanium Arm PLANOLITH granite measuring plate with substructure FARO transport case Measuring probe and measuring accessories as shown in the pictures Accessories case Magnetic clamping plate Connection cable FARO manuals and documentation Software and data carriers as shown in the pictures Further accessories as shown in the pictures Areas of application: 3D coordinate measurement Quality assurance Component measurement Component inspection Manufacturing metrology Tool and fixture construction Scope of supply: 1 × FARO Titanium Arm 3D coordinate measuring arm 1 × PLANOLITH granite measuring table with substructure Transport case, measuring accessories, documentation and accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures Nameplates present The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Iodez Hm Ngjpfx Ahbetn Shipping by freight forwarder is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.