Used Swivel Spindle for sale (15,049)

Condition: good (used), Year of construction: 1980, LZ lathe, manuf. VDF HEIDENREICH&HARBECK, Type: 21 RO, year approx. 1980 Equipped with 2-axis digital readout Heidenhain ND 730, rapid traverse in longitudinal and cross directions. Chuck: 200 mm Forkardt. Toolholder: Multifix size B with 2 toolholders. 1 fixed steady rest and 1 traveling steady. Centre height: 240 mm Centre distance: 1250 mm Spindle bore: 55 mm Spindle speeds: 19–2000 rpm, motor output 5.5 kW Dimensions (LxWxH): 3.1 m x 1.2 m x 1.3 m. Weight approx. 2000 kg. Machine in good condition. Ffjdsw S Ituopfx Ac Neu

Condition: good (used), Year of construction: 1972, LZ Lathe Manufacturer: HEIDENREICH & HERBECK Type: 21RO Year: 1972 with Parat quick-change toolholder, 10 pieces, machine documentation, thread dial indicator, live center, 250 mm Forkardt chuck. Swing over bed: 430 mm Swing over cross slide: 255 mm Fedot Ipi Iepfx Ac Nefu Center distance: 1000 mm Turning length: 750 mm Spindle speeds: 19-2000 rpm, 5.5 kW motor Spindle bore: 56 mm Further technical data available in the data sheet Required space: Length 2900 mm, Width 1100 mm, Height 1300 mm, Weight approx. 1750 kg Machine documentation available. Coolant system installed, chip guard/rear panel. The machine is in good condition and can be demonstrated under power.

Condition: ready for operation (used), Year of construction: 1996, LZ lathe, make SASTA STANKO, type: SA562M, year of manufacture 1996 Swing diameter above bed: 500 mm Swing diameter above plan support: 290 mm Tent length: 1500 mm Spindle speeds: 16 2000 rpm Fsdpfxevkuaus Ac Nsfu Spindle bore: 55 mm Chuck diameter 250 mm Forkardt tool holder Multifix size C. Machine with rapid traverse X and Z axis Good general condition. For further information see data sheets.

Condition: excellent (used), Year of construction: 1986, Engine lathe, manufacturer VDF HEIDENREICH & HARBECK, type 540 Hamburg, year 1986. In very good original condition, equipped with a 3-axis digital readout Heidenhain POSITIP 880. Feed and rapid traverse on all 3 axes, including the top slide. Comes with coolant system, rear chip guard, and machine documentation. Chuck: 315 mm Forkardt Turning diameter: 540 mm Turning length: 1500 mm Ffedpfsx Hr Dusx Ac Nju Spindle bore: 103 mm Spindle speeds: 9–1800 rpm Tool holder: Multifix C Chip protection cover For further details, see technical data sheet. Space requirement: length 3.8 m, width 2 m (with rear wall), height 2 m (with rear wall), weight approx. 3500 kg.

Condition: good (used), Year of construction: 1970, LZ-Lathe Fabr.SCHAERER Type:UD500 Year 1970 overhauled 1991 With Forkadt chuck 315mm tool holder Multifix size C. Center height : 250 mm Center width : 1500 mm spindle bore: 65 mm Fsdpfx Acsu Rdure Nefu Spindle speed : 18 - 900 rpm. Machine in good condition .

Condition: used, Year of construction: 1980, VDF Wohlenberg Type:V1400 Parts . Top support : Overall height : 600 mm Overall length : 650 mm Base plate : 350 mm X 350 mm Base plate holes diameter : 22 mm Spacing: width 240 mm lengthwise : 290 mm Tool holder mounting : 100 mm X 45 mm Thread tool holder M30 . Tailstock: Center height : 630 mm Quill diameter : 100 mm Base plate : 500 mm X 400 mm . Faceplate : Diameter 1000 mm Width : 125 mm with 3 jaws Spindle holder 250 mm 4 bores diameter 20 mm pitch circle 200 mm . Sale individually or in a package possible . Fjdpfx Astttigoc Nsfu

Year of construction: 1995, condition: used, 2X Available main spindle controller SIEMENS SIMODIVE Fedpfedi Hihex Ac Nsfu Type:D380-D430/120A. Price per 1.piece

Year of construction: 1996, condition: ready for operation (used), Main spindle motor make INDRAMAT Type:2AD160C-B35LA1-BS03-A2V2 Bj.1996 Everything else see type plate From CNC lathe. (We also have the matching motor controller from INDRAMAT) Ffjdpfx Aogtmuusc Nou

Year of construction: 1980, condition: excellent (used), Milling spindlekpof DECKEL for machines type: LB2 u.LB3 year 1980 Spindle holder ISO 40 Head in both sides + - 45 burr swiveling . Ffjdpfjhvz Dxox Ac Nou In very good condition.

Year of construction: 1998, condition: good (used), Pass-through spindle oil cooler Fabr.SCHMIPKE Type:DK34-V/SO Bj.1998 Goods to CNC BAZ Verbaut. 2.Piece of forgo price each. Piece. Building mass: L1.4m B0.5mH1m Gewicht.ca.250kg. Fsdpfxsd Nmnuj Ac Nefu

Year of construction: 1998, condition: excellent (used), Grinding spindle of CNC tool grinding machine Fjdpsm Tr Hlsfx Ac Nefu Make SCHNEEBERGER Type: GEMINI Year 1998 in good condition .

Condition: used, 2-spindle vertical drilling machine Fsdoyg Ix Tjpfx Ac Nefu

Condition: excellent (used), Year of construction: 2015, WEINIG POWERMAT 1200 (6 SPINDLE) YEAR 2015 WIDTH 230MM HEIGHT 160MM ALL SPINDLES 8000 RPM ALL SPINDLES 50MM SHORT INFEED TABLE 1: BOTTOM 11 KW 2: RIGHT 11 KW 3: LEFT 11 KW 4: TOP 15 KW 5: TOP 15 KW 6: BOTTOM 11 KW CNC AXIAL CONTROL ON SPINDLES 3, 4 AND 5 40 M/MIN+ ELECTRIC. FEED 7 x DRIVEN TOP FEED ROLLERS 3 x DRIVEN BED FEED ROLLERS ANTI-KICKBACK DEVICE AUTOM. BED LUBRICATION PNEUM. POWERED SIDE PRESSURE ROLLERS DIMENSION: APPR 3000 X 2000 X 1800 MM WEIGHT: APPR. 4500 KGS DUSTHOODS: 6 x 140 MM DIAMETER DUST MANIFOLD INCLUDED POSSIBLE TO SUPPLY WITH MOULDER INFEED AND DROP LEAF OUTFEED POSSIBLE TO SUPPLY TOOLING IF NEEDED Fsdpeyg Eblofx Ac Nefu

Condition: used, Working mode: semiautomatic Ffodpeydp Udofx Ac Nju Machine type: Horizontal bandsaw Cut: Mitre cut Mitre cuts range: -60° – 60° Drive: 4 kW, 3×400 V/50 Hz Saw band speed: 20 – 120 m/min. Saw band dimensions: 6 100×41×1,3 mm Material loading height: 770 mm Shortest remnant length: 40 mm Smallest sawing diameter: Ø 5 mm

Condition: used, Year of construction: 1996, Technical details: number of spindles: 8 spindle passage: 32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AF32 S Dnt Yob: 1996 Eight-spindle automatic lathe with 8 main spindles max. nominal diameter: D=32mm Spindle drum with hirth coupling configurable as 2x4 spindles, pick up preparing in positions 4 and 8 Thread cutting couplings Ffodjydnglspfx Ac Nju Electronic cross slide adjustment in positions 1, 2, 5, 6; 2 independent feeds Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA40/42/P) Coolant tank with hinged chip conveyor Control: Siemens S7-300 PLC Display device: Siemens Simatic HMI Delivery without BDE Tooling included in the scope of delivery may differ from the images Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 1997, Technical details: Fjdpfx Aowl Nm Dec Njfu number of spindles: 6 spindle passage: 18 mm turning length: 63/50 mm weight of the machine ca.: 8,6 t spindle drive motor: 11 kW

Condition: used, Year of construction: 2008, Technical details: number of spindles: 6 Fodpeluhcgefx Ac Nsfu spindle passage: 18 mm turning length: 63/50 mm weight of the machine ca.: 4,5 t spindle drive motor: 11 kW

Condition: good (used), Year of construction: 1963, stroke = 250 mm Ffedpfsydlxfex Ac Nju

Condition: excellent (used), High frequency spindle Make Precise Type SC 60121 Speed 7500 - 30000 Hertz 250-1000 Fodpfx Aju Numvoc Nsfu Volt 88-250 13 kw Diameter 120 mm Total length 420 mm Weight 22 kg

Condition: like new (used), Refurbished Mazak Main Spindle QTS 200 The spindle has been completely refurbished; spindle bearings and spacer sleeves have been replaced. Subsequently, it has been balanced. We have further refurbished Mazak spindles in stock; feel free to send us your enquiry. This is an exchange spindle, which means a used part is required in return. Ffedpfx Acsxawcts Nou If you have any further questions, we are happy to assist you.

Condition: good (used), Maximum length of the drilled part 1600mm Maximum width of the drilled element 450mm 1 horizontal drilling unit 3 spindles 15mm apart 2 vertical drilling unit 3 spindles 22mm apart 3 vertical drilling unit 3 spindles spacing 32mm 4 vertical drilling unit 4 spindles (3 spacing 22mm - 1 spacing 32 perpendicular to the others) Ffjdpfx Ajttri Eec Nsu 5 vertical drilling unit 3 spindles spacing 32mm 6 horizontal drilling unit 3 spindles spacing 15mm

Condition: excellent (used), Specifications: * condition - used * manufacturer - CASADEI * main motor - 4 kW * spindle diameter - 45 mm * 4 speed adjustable on belts in the range of 4/6/8/10 thousand. triangle-star motor start * foot brake * original painting * overall dimensions - 110 x 90 x 120 cm (L x W x H). * weight - about 500 kg Additional information: * very good, factory technical and visual condition. * presented photos illustrate the actual condition of the object of sale * possibility of switching on and checking the device on site * the price given in the auction includes 23% VAT Fedpfxjiu Ahbe Ac Njfu

Condition: used, Assortment of HSS shank end mills Approximately 80 pcs Diameter 10 to 25 mm Fsdpfxjygrwgj Ac Nefu

Condition: excellent (used), Catalogue number: 7859 ADVANTAGES – 8 spindles Ffsdpfsx I D Nlox Ac Neu – with oscillation – variable spindle spacing (adjustable) – 2 work tables – unpainted – used drilling machine, in very good condition TECHNICAL DATA Drilling spindles: 2x4 pcs Oscillation range left/right: 40mm per side Oscillation speed adjustment on inverter Spindle head adjustment: up/down Each pair of spindles (2 pcs) adjustable: left/right 2 rotation speed options + left/right Max tool diameter: 15mm Table adjustment: up/down Table dimensions: 700x200mm 4 hydraulic cylinders Motor power: 2x 2kW Oscillation motor: 0.75kW Dimensions (L/W/H): 1800x1350x1300mm Weight: 862kg Net price: 16,900 PLN Net price: 4,020 EUR Net price calculated at exchange rate 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, total width: 45,000 mm, total length: 19,900 mm, total height: 23,000 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, bar length: 600 mm, CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Fodpfx Acsyddv As Nefu Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.